[PATCH] drm/i915/dp_mst: Fix MST state after a sink reset

Jani Nikula jani.nikula at linux.intel.com
Thu Aug 22 10:00:03 UTC 2024


On Wed, 21 Aug 2024, Imre Deak <imre.deak at intel.com> wrote:
> On Wed, Aug 21, 2024 at 05:19:11PM +0300, Jani Nikula wrote:
>> On Wed, 24 Jul 2024, Imre Deak <imre.deak at intel.com> wrote:
>> > In some cases the sink can reset itself after it was configured into MST
>> > mode, without the driver noticing the disconnected state. For instance
>> > the reset may happen in the middle of a modeset, or the (long) HPD pulse
>> > generated may be not long enough for the encoder detect handler to
>> > observe the HPD's deasserted state. In this case the sink's DPCD
>> > register programmed to enable MST will be reset, while the driver still
>> > assumes MST is still enabled. Detect this condition, which will tear
>> > down and recreate/re-enable the MST topology.
>> >
>> > Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11195
>> > Signed-off-by: Imre Deak <imre.deak at intel.com>
>> > ---
>> >  drivers/gpu/drm/i915/display/intel_dp.c     |  3 +++
>> >  drivers/gpu/drm/i915/display/intel_dp_mst.c | 30 +++++++++++++++++++++
>> >  drivers/gpu/drm/i915/display/intel_dp_mst.h |  1 +
>> >  3 files changed, 34 insertions(+)
>> >
>> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
>> > index 1e43e32e05199..c621f6daf8235 100644
>> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
>> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
>> > @@ -5878,6 +5878,9 @@ intel_dp_detect(struct drm_connector *connector,
>> >  	else
>> >  		status = connector_status_disconnected;
>> >  
>> > +	if (!intel_dp_mst_verify_dpcd_state(intel_dp))
>> > +		status = connector_status_disconnected;
>> > +
>> 
>> So I still don't understand. We've got a detect which we've determined
>> is connected. But then we disconnect because the sink state has changed.
>> 
>> How do we get another connect?
>
> The detect in this case will be retried with a 1 sec delay, since the
> mode changes back to SST and the connector state stays disconnected.

What exactly triggers the retry? I don't see this triggering the
INTEL_HOTPLUG_RETRY case.

I'm just trying to understand, please bear with me.

BR,
Jani.


>
>> BR,
>> Jani.
>> 
>> 
>> >  	if (status == connector_status_disconnected) {
>> >  		memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance));
>> >  		memset(intel_connector->dp.dsc_dpcd, 0, sizeof(intel_connector->dp.dsc_dpcd));
>> > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
>> > index 27ce5c3f5951e..89b147e37b400 100644
>> > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
>> > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
>> > @@ -1998,3 +1998,33 @@ bool intel_dp_mst_crtc_needs_modeset(struct intel_atomic_state *state,
>> >  
>> >  	return false;
>> >  }
>> > +
>> > +/**
>> > + * intel_dp_mst_verify_dpcd_state - verify the MST SW enabled state wrt. the DPCD
>> > + * @intel_dp: DP port object
>> > + *
>> > + * Verify if @intel_dp's MST enabled SW state matches the corresponding DPCD
>> > + * state. A long HPD pulse -not long enough to be detected as a disconnected
>> > + * state - could've reset the DPCD state, which requires tearing
>> > + * down/recreating the MST topology.
>> > + *
>> > + * Returns %true if the SW MST enabled and DPCD states match, %false
>> > + * otherwise.
>> > + */
>> > +bool intel_dp_mst_verify_dpcd_state(struct intel_dp *intel_dp)
>> > +{
>> > +	int ret;
>> > +	u8 val;
>> > +
>> > +	if (!intel_dp->is_mst)
>> > +		return true;
>> > +
>> > +	ret = drm_dp_dpcd_readb(intel_dp->mst_mgr.aux, DP_MSTM_CTRL, &val);
>> > +	if (ret < 0)
>> > +		return false;
>> > +
>> > +	if (val != (DP_MST_EN | DP_UP_REQ_EN | DP_UPSTREAM_IS_SRC))
>> > +		return false;
>> > +
>> > +	return true;
>> > +}
>> > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.h b/drivers/gpu/drm/i915/display/intel_dp_mst.h
>> > index 8ca1d599091c6..9e4c7679f1c3a 100644
>> > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.h
>> > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.h
>> > @@ -27,5 +27,6 @@ int intel_dp_mst_atomic_check_link(struct intel_atomic_state *state,
>> >  				   struct intel_link_bw_limits *limits);
>> >  bool intel_dp_mst_crtc_needs_modeset(struct intel_atomic_state *state,
>> >  				     struct intel_crtc *crtc);
>> > +bool intel_dp_mst_verify_dpcd_state(struct intel_dp *intel_dp);
>> >  
>> >  #endif /* __INTEL_DP_MST_H__ */
>> 
>> -- 
>> Jani Nikula, Intel

-- 
Jani Nikula, Intel


More information about the Intel-gfx mailing list