[PATCH v6 5/7] drm/i915/xe3: dirty rect support for FBC
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Feb 5 13:31:22 UTC 2025
On Thu, Jan 30, 2025 at 11:00:24PM +0200, Vinod Govindapillai wrote:
> Dirty rectangle feature allows FBC to recompress a subsection
> of a frame. When this feature is enabled, display will read
> the scan lines between dirty rectangle start line and dirty
> rectangle end line in subsequent frames.
>
> Use the merged damage clip stored in the plane state to
> configure the FBC dirty rect areas.
>
> v2: - Move dirty rect handling to fbc state (Ville)
>
> v3: - Use intel_fbc_dirty_rect_update_noarm (Ville)
> - Split plane damage collection and dirty rect preparation
> - Handle case where dirty rect fall outside the visible region
>
> v4: - A state variable to check if we need to update dirty rect
> registers in case intel_fbc_can_flip_nuke() (Ville)
>
> Bspec: 68881, 71675, 73424
> Signed-off-by: Vinod Govindapillai <vinod.govindapillai at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 7 +
> drivers/gpu/drm/i915/display/intel_fbc.c | 132 +++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_fbc.h | 6 +
> 3 files changed, 145 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 7d68d652c1bc..33277f892279 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -7263,6 +7263,8 @@ static void intel_update_crtc(struct intel_atomic_state *state,
>
> commit_pipe_pre_planes(state, crtc);
>
> + intel_fbc_dirty_rect_update_noarm(NULL, state, crtc);
> +
That is not the right place for _noarm() stuff.
Hmm, maybe we should just do this as part of intel_plane_update_noarm()?
How does the dirty rect interact with async flips?
> intel_crtc_planes_update_arm(NULL, state, crtc);
>
> commit_pipe_post_planes(state, crtc);
> @@ -7723,6 +7725,8 @@ static void intel_atomic_dsb_finish(struct intel_atomic_state *state,
> new_crtc_state);
> intel_crtc_planes_update_noarm(new_crtc_state->dsb_commit,
> state, crtc);
> + intel_fbc_dirty_rect_update_noarm(new_crtc_state->dsb_commit,
> + state, crtc);
>
> intel_dsb_vblank_evade(state, new_crtc_state->dsb_commit);
>
> @@ -7769,6 +7773,9 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
>
> intel_atomic_prepare_plane_clear_colors(state);
>
> + for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
> + intel_fbc_prepare_dirty_rect(state, crtc);
> +
> for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
> intel_atomic_dsb_finish(state, crtc);
>
> diff --git a/drivers/gpu/drm/i915/display/intel_fbc.c b/drivers/gpu/drm/i915/display/intel_fbc.c
> index df05904bac8a..24736c7a79a6 100644
> --- a/drivers/gpu/drm/i915/display/intel_fbc.c
> +++ b/drivers/gpu/drm/i915/display/intel_fbc.c
> @@ -88,6 +88,10 @@ struct intel_fbc_state {
> u16 override_cfb_stride;
> u16 interval;
> s8 fence_id;
> + struct {
> + struct drm_rect rect;
> + bool valid;
> + } fbc_dirty_rect;
> };
>
> struct intel_fbc {
> @@ -527,6 +531,9 @@ static void ilk_fbc_deactivate(struct intel_fbc *fbc)
> struct intel_display *display = fbc->display;
> u32 dpfc_ctl;
>
> + if (HAS_FBC_DIRTY_RECT(display))
> + intel_de_write(display, XE3_FBC_DIRTY_CTL(fbc->id), 0);
> +
> /* Disable compression */
> dpfc_ctl = intel_de_read(display, ILK_DPFC_CONTROL(fbc->id));
> if (dpfc_ctl & DPFC_CTL_EN) {
> @@ -670,6 +677,10 @@ static void ivb_fbc_activate(struct intel_fbc *fbc)
> if (DISPLAY_VER(display) >= 20)
> intel_de_write(display, ILK_DPFC_CONTROL(fbc->id), dpfc_ctl);
>
> + if (HAS_FBC_DIRTY_RECT(display))
> + intel_de_write(display, XE3_FBC_DIRTY_CTL(fbc->id),
> + FBC_DIRTY_RECT_EN);
> +
> intel_de_write(display, ILK_DPFC_CONTROL(fbc->id),
> DPFC_CTL_EN | dpfc_ctl);
> }
> @@ -1203,6 +1214,127 @@ static bool tiling_is_valid(const struct intel_plane_state *plane_state)
> return i8xx_fbc_tiling_valid(plane_state);
> }
>
> +static bool intel_fbc_can_flip_nuke(struct intel_atomic_state *state,
> + struct intel_crtc *crtc,
> + struct intel_plane *plane);
You should put the code into a place that doesn't need this extra
declaration.
> +
> +static void
> +intel_fbc_dirty_rect_update(struct intel_dsb *dsb, struct intel_plane *plane)
> +{
> + struct intel_display *display = to_intel_display(plane);
> + struct intel_fbc *fbc = plane->fbc;
> + struct intel_fbc_state *fbc_state = &fbc->state;
> + struct drm_rect *fbc_dirty_rect = &fbc_state->fbc_dirty_rect.rect;
> +
> + if (fbc_state->plane != plane)
> + return;
> +
> + if (!fbc_state->fbc_dirty_rect.valid)
> + return;
I think that extra flag can be thrown out and you can just
check if the rect is visible here.
> +
> + intel_de_write_dsb(display, dsb, XE3_FBC_DIRTY_RECT(fbc->id),
> + FBC_DIRTY_RECT_START_LINE(fbc_dirty_rect->y1) |
> + FBC_DIRTY_RECT_END_LINE(fbc_dirty_rect->y2));
> +
> + fbc_state->fbc_dirty_rect.valid = false;
Why?
> +}
> +
> +void
> +intel_fbc_dirty_rect_update_noarm(struct intel_dsb *dsb,
> + struct intel_atomic_state *state,
> + struct intel_crtc *crtc)
> +{
> + struct intel_display *display = to_intel_display(state);
> + struct intel_plane_state *plane_state;
const, although it seems to me we can just rely on the rect being valid
or not and then the plane visiblility is also already covered.
> + struct intel_plane *plane;
> + int i;
> +
> + if (!HAS_FBC_DIRTY_RECT(display))
> + return;
> +
> + for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
> + struct intel_fbc *fbc = plane->fbc;
> +
> + if (!fbc || plane->pipe != crtc->pipe)
> + continue;
> +
> + if (!plane_state->uapi.visible)
> + continue;
That check would also disappear.
This does need to check if the plane is the one using FBC
currently. Oh, I see you put that check inside
intel_fbc_dirty_rect_update(). I think the check belongs
here because that is how we do it everwhere else.
I was pondering if we need to keep this lockless or not.
I guess we don't since we are doing it from the noarm()
section (assuming we're not planing to implement mailbox
flips tomorrow). So for now I think we can just do the proper
locking here too. If we do need to make this lockless in
then we need to explain what makes it safe/correct.
> +
> + intel_fbc_dirty_rect_update(dsb, plane);
> + }
> +}
> +
> +static void
> +validate_and_clip_dirty_rect(struct intel_plane_state *plane_state,
> + struct drm_rect *dirty_rect)
> +{
> + int y_offset = plane_state->view.color_plane[0].y;
> + int plane_height = drm_rect_height(&plane_state->uapi.src) >> 16;
> + int max_endline = y_offset + plane_height - 1;
> +
> + dirty_rect->y1 = clamp(dirty_rect->y1, y_offset, max_endline);
> + dirty_rect->y2 = clamp(dirty_rect->y2, dirty_rect->y1, max_endline);
> +}
This is not needed.
> +
> +static void
> +__intel_fbc_prepare_dirty_rect(struct intel_plane *plane,
> + struct intel_plane_state *plane_state,
> + bool fbc_dirty_rect_valid)
> +{
> + struct intel_fbc_state *fbc_state = &plane->fbc->state;
> + struct drm_rect *fbc_dirty_rect = &fbc_state->fbc_dirty_rect.rect;
> + struct drm_rect *damage_merged = &plane_state->damage_merged;
> + int y_offset = plane_state->view.color_plane[0].y;
> +
> + fbc_state->fbc_dirty_rect.valid = fbc_dirty_rect_valid;
> +
> + if (drm_rect_visible(damage_merged)) {
> + fbc_dirty_rect->y1 = damage_merged->y1;
> + fbc_dirty_rect->y2 = damage_merged->y2;
> + } else {
> + /* If not visible, we need to set one single line */
> + fbc_dirty_rect->y1 = y_offset;
> + fbc_dirty_rect->y2 = y_offset;
> + }
> + fbc_dirty_rect->x1 = damage_merged->x1;
> + fbc_dirty_rect->x2 = damage_merged->x2;
> +
> + validate_and_clip_dirty_rect(plane_state, fbc_dirty_rect);
> +}
> +
> +void
> +intel_fbc_prepare_dirty_rect(struct intel_atomic_state *state,
> + struct intel_crtc *crtc)
> +{
> + struct intel_display *display = to_intel_display(state);
> + struct intel_plane_state *plane_state;
> + struct intel_plane *plane;
> + int i;
> +
> + if (!HAS_FBC_DIRTY_RECT(display))
> + return;
> +
> + for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
> + struct intel_fbc *fbc = plane->fbc;
> +
> + if (!fbc || plane->pipe != crtc->pipe)
> + continue;
> +
> + if (!fbc->state.plane)
> + continue;
fbc->state.plane != plane
Also needs locking.
> +
> + /* If plane not visible, dirty rect might have invalid coordinates */
> + if (!plane_state->uapi.visible)
> + continue;
Seems like a redundant check.
> +
> + __intel_fbc_prepare_dirty_rect(plane, plane_state,
> + intel_fbc_can_flip_nuke(state,
> + crtc,
> + plane));
> + }
> +}
> +
> static void intel_fbc_update_state(struct intel_atomic_state *state,
> struct intel_crtc *crtc,
> struct intel_plane *plane)
> diff --git a/drivers/gpu/drm/i915/display/intel_fbc.h b/drivers/gpu/drm/i915/display/intel_fbc.h
> index ceae55458e14..8f1b11c6f4d2 100644
> --- a/drivers/gpu/drm/i915/display/intel_fbc.h
> +++ b/drivers/gpu/drm/i915/display/intel_fbc.h
> @@ -14,6 +14,7 @@ struct intel_atomic_state;
> struct intel_crtc;
> struct intel_crtc_state;
> struct intel_display;
> +struct intel_dsb;
> struct intel_fbc;
> struct intel_plane;
> struct intel_plane_state;
> @@ -48,5 +49,10 @@ void intel_fbc_handle_fifo_underrun_irq(struct intel_display *display);
> void intel_fbc_reset_underrun(struct intel_display *display);
> void intel_fbc_crtc_debugfs_add(struct intel_crtc *crtc);
> void intel_fbc_debugfs_register(struct intel_display *display);
> +void intel_fbc_prepare_dirty_rect(struct intel_atomic_state *state,
> + struct intel_crtc *crtc);
> +void intel_fbc_dirty_rect_update_noarm(struct intel_dsb *dsb,
> + struct intel_atomic_state *state,
> + struct intel_crtc *crtc);
>
> #endif /* __INTEL_FBC_H__ */
> --
> 2.43.0
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list