[PATCH 11/17] drm/i915/ddi: Sanitize DDI_BUF_CTL register definitions

[Imre Deak]

On Wed, Feb 05, 2025 at 02:52:08PM +0200, Jani Nikula wrote:
> On Wed, 29 Jan 2025, Imre Deak <imre.deak at intel.com> wrote:
> > From: Imre Deak <imre.deak at gmail.com>
> >
> > Align the DDI_BUF_CTL register flag definitions with how this is done
> > elsewhere.
> >
> > Signed-off-by: Imre Deak <imre.deak at gmail.com>
> > ---
> >  drivers/gpu/drm/i915/i915_reg.h | 22 ++++++++++++----------
> >  1 file changed, 12 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 7fe4e71fc08ec..5cee6a96270af 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -3621,27 +3621,29 @@ enum skl_power_gate {
> >  #define _DDI_BUF_CTL_B				0x64100
> >  /* Known as DDI_CTL_DE in MTL+ */
> >  #define DDI_BUF_CTL(port) _MMIO_PORT(port, _DDI_BUF_CTL_A, _DDI_BUF_CTL_B)
> > -#define  DDI_BUF_CTL_ENABLE			(1 << 31)
> > +#define  DDI_BUF_CTL_ENABLE			REG_BIT(31)
> >  #define  XE2LPD_DDI_BUF_D2D_LINK_ENABLE		REG_BIT(29)
> >  #define  XE2LPD_DDI_BUF_D2D_LINK_STATE		REG_BIT(28)
> > -#define  DDI_BUF_TRANS_SELECT(n)	((n) << 24)
> > -#define  DDI_BUF_EMP_MASK			(0xf << 24)
> > -#define  DDI_BUF_PHY_LINK_RATE(r)		((r) << 20)
> > +#define  DDI_BUF_EMP_MASK			REG_GENMASK(27, 24)
> > +#define  DDI_BUF_TRANS_SELECT(n)		REG_FIELD_PREP(DDI_BUF_EMP_MASK, n)
> > +#define  DDI_BUF_PHY_LINK_RATE_MASK		REG_GENMASK(23, 20)
> > +#define  DDI_BUF_PHY_LINK_RATE(r)		REG_FIELD_PREP(DDI_BUF_PHY_LINK_RATE_MASK, r)
> 
> Ville has been advocating wrapping macro arguments in parens also in
> these cases, and I'm starting to lean that way too.

That is parens around 'r' above, ok I suppose that's more robust (in
case the called macros don't use parens when required). 

> Other than that,
> 
> Reviewed-by: Jani Nikula <jani.nikula at intel.com>
> 
> 
> >  #define  DDI_BUF_PORT_DATA_MASK			REG_GENMASK(19, 18)
> >  #define  DDI_BUF_PORT_DATA_10BIT		REG_FIELD_PREP(DDI_BUF_PORT_DATA_MASK, 0)
> >  #define  DDI_BUF_PORT_DATA_20BIT		REG_FIELD_PREP(DDI_BUF_PORT_DATA_MASK, 1)
> >  #define  DDI_BUF_PORT_DATA_40BIT		REG_FIELD_PREP(DDI_BUF_PORT_DATA_MASK, 2)
> > -#define  DDI_BUF_PORT_REVERSAL			(1 << 16)
> > +#define  DDI_BUF_PORT_REVERSAL			REG_BIT(16)
> >  #define  DDI_BUF_LANE_STAGGER_DELAY_MASK	REG_GENMASK(15, 8)
> >  #define  DDI_BUF_LANE_STAGGER_DELAY(symbols)	REG_FIELD_PREP(DDI_BUF_LANE_STAGGER_DELAY_MASK, \
> >  							       symbols)
> > -#define  DDI_BUF_IS_IDLE			(1 << 7)
> > +#define  DDI_BUF_IS_IDLE			REG_BIT(7)
> >  #define  DDI_BUF_CTL_TC_PHY_OWNERSHIP		REG_BIT(6)
> > -#define  DDI_A_4_LANES				(1 << 4)
> > -#define  DDI_PORT_WIDTH(width)			(((width) == 3 ? 4 : ((width) - 1)) << 1)
> > -#define  DDI_PORT_WIDTH_MASK			(7 << 1)
> > +#define  DDI_A_4_LANES				REG_BIT(4)
> > +#define  DDI_PORT_WIDTH_MASK			REG_GENMASK(3, 1)
> > +#define  DDI_PORT_WIDTH(width)			REG_FIELD_PREP(DDI_PORT_WIDTH_MASK, \
> > +							       (width) == 3 ? 4 : (width) - 1)
> >  #define  DDI_PORT_WIDTH_SHIFT			1
> > -#define  DDI_INIT_DISPLAY_DETECTED		(1 << 0)
> > +#define  DDI_INIT_DISPLAY_DETECTED		REG_BIT(0)
> >  
> >  /* DDI Buffer Translations */
> >  #define _DDI_BUF_TRANS_A		0x64E00
> 
> -- 
> Jani Nikula, Intel