[PATCH 07/12] drm/i915: Relocate vlv_wait_port_ready()

[Jani Nikula]

On Thu, 13 Feb 2025, Ville Syrjala <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> While vlv_wait_port_ready() doens't directly talk to the VLV/CHV
> DPIO PHY, the signals it's looking for do come from the PHY. So
> it seems appropriate to relocate it into intel_dpio_phy.c.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

> ---
>  drivers/gpu/drm/i915/display/intel_display.c  | 34 -------------------
>  drivers/gpu/drm/i915/display/intel_display.h  |  3 --
>  drivers/gpu/drm/i915/display/intel_dpio_phy.c | 34 +++++++++++++++++++
>  drivers/gpu/drm/i915/display/intel_dpio_phy.h |  8 +++++
>  4 files changed, 42 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 4278212a2496..c2bde539a4ff 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -474,40 +474,6 @@ static void assert_planes_disabled(struct intel_crtc *crtc)
>  		assert_plane_disabled(plane);
>  }
>  
> -void vlv_wait_port_ready(struct intel_display *display,
> -			 struct intel_digital_port *dig_port,
> -			 unsigned int expected_mask)
> -{
> -	u32 port_mask;
> -	i915_reg_t dpll_reg;
> -
> -	switch (dig_port->base.port) {
> -	default:
> -		MISSING_CASE(dig_port->base.port);
> -		fallthrough;
> -	case PORT_B:
> -		port_mask = DPLL_PORTB_READY_MASK;
> -		dpll_reg = DPLL(display, 0);
> -		break;
> -	case PORT_C:
> -		port_mask = DPLL_PORTC_READY_MASK;
> -		dpll_reg = DPLL(display, 0);
> -		expected_mask <<= 4;
> -		break;
> -	case PORT_D:
> -		port_mask = DPLL_PORTD_READY_MASK;
> -		dpll_reg = DPIO_PHY_STATUS;
> -		break;
> -	}
> -
> -	if (intel_de_wait(display, dpll_reg, port_mask, expected_mask, 1000))
> -		drm_WARN(display->drm, 1,
> -			 "timed out waiting for [ENCODER:%d:%s] port ready: got 0x%x, expected 0x%x\n",
> -			 dig_port->base.base.base.id, dig_port->base.base.name,
> -			 intel_de_read(display, dpll_reg) & port_mask,
> -			 expected_mask);
> -}
> -
>  void intel_enable_transcoder(const struct intel_crtc_state *new_crtc_state)
>  {
>  	struct intel_display *display = to_intel_display(new_crtc_state);
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index 2e11fc2ba1f4..b3cdf7f04450 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -488,9 +488,6 @@ bool intel_encoder_is_tc(struct intel_encoder *encoder);
>  enum tc_port intel_encoder_to_tc(struct intel_encoder *encoder);
>  
>  int ilk_get_lanes_required(int target_clock, int link_bw, int bpp);
> -void vlv_wait_port_ready(struct intel_display *display,
> -			 struct intel_digital_port *dig_port,
> -			 unsigned int expected_mask);
>  
>  bool intel_fuzzy_clock_check(int clock1, int clock2);
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_dpio_phy.c b/drivers/gpu/drm/i915/display/intel_dpio_phy.c
> index 5f88702818d3..968b795206b3 100644
> --- a/drivers/gpu/drm/i915/display/intel_dpio_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_dpio_phy.c
> @@ -1156,3 +1156,37 @@ void vlv_phy_reset_lanes(struct intel_encoder *encoder,
>  	vlv_dpio_write(dev_priv, phy, VLV_PCS_DW1_GRP(ch), 0x00e00060);
>  	vlv_dpio_put(dev_priv);
>  }
> +
> +void vlv_wait_port_ready(struct intel_display *display,
> +			 struct intel_digital_port *dig_port,
> +			 unsigned int expected_mask)
> +{
> +	u32 port_mask;
> +	i915_reg_t dpll_reg;
> +
> +	switch (dig_port->base.port) {
> +	default:
> +		MISSING_CASE(dig_port->base.port);
> +		fallthrough;
> +	case PORT_B:
> +		port_mask = DPLL_PORTB_READY_MASK;
> +		dpll_reg = DPLL(display, 0);
> +		break;
> +	case PORT_C:
> +		port_mask = DPLL_PORTC_READY_MASK;
> +		dpll_reg = DPLL(display, 0);
> +		expected_mask <<= 4;
> +		break;
> +	case PORT_D:
> +		port_mask = DPLL_PORTD_READY_MASK;
> +		dpll_reg = DPIO_PHY_STATUS;
> +		break;
> +	}
> +
> +	if (intel_de_wait(display, dpll_reg, port_mask, expected_mask, 1000))
> +		drm_WARN(display->drm, 1,
> +			 "timed out waiting for [ENCODER:%d:%s] port ready: got 0x%x, expected 0x%x\n",
> +			 dig_port->base.base.base.id, dig_port->base.base.name,
> +			 intel_de_read(display, dpll_reg) & port_mask,
> +			 expected_mask);
> +}
> diff --git a/drivers/gpu/drm/i915/display/intel_dpio_phy.h b/drivers/gpu/drm/i915/display/intel_dpio_phy.h
> index a82939165546..15596407fe87 100644
> --- a/drivers/gpu/drm/i915/display/intel_dpio_phy.h
> +++ b/drivers/gpu/drm/i915/display/intel_dpio_phy.h
> @@ -72,6 +72,9 @@ void vlv_phy_pre_encoder_enable(struct intel_encoder *encoder,
>  				const struct intel_crtc_state *crtc_state);
>  void vlv_phy_reset_lanes(struct intel_encoder *encoder,
>  			 const struct intel_crtc_state *old_crtc_state);
> +void vlv_wait_port_ready(struct intel_display *display,
> +			 struct intel_digital_port *dig_port,
> +			 unsigned int expected_mask);
>  #else
>  static inline void bxt_port_to_phy_channel(struct intel_display *display, enum port port,
>  					   enum dpio_phy *phy, enum dpio_channel *ch)
> @@ -170,6 +173,11 @@ static inline void vlv_phy_reset_lanes(struct intel_encoder *encoder,
>  				       const struct intel_crtc_state *old_crtc_state)
>  {
>  }
> +static inline void vlv_wait_port_ready(struct intel_display *display,
> +				       struct intel_digital_port *dig_port,
> +				       unsigned int expected_mask)
> +{
> +}
>  #endif
>  
>  #endif /* __INTEL_DPIO_PHY_H__ */

-- 
Jani Nikula, Intel