[PATCH 1/2] drm/i915/cx0: Fix SSC enablement in PORT_CLOCK_CTL

[Imre Deak]

On Mon, Jan 06, 2025 at 09:38:20AM +0530, Suraj Kandpal wrote:
> SSC for PLL_A is enabled for UHBR10 or UHBR20 regardless of the
> need for SSC. This means the ssc_enabled variable had no say
> to determine enablement of SSC on PLL A.

I don't see the above in the spec. It suggests that SSC should be
enabled on PLL A for MFD, but in any case SSC can only be enabled
if the sink supports SSC, as indicated by dpll_hw_state.cx0pll.ssc_enabled.

> Bspec: 64568, 74165, 74489, 74491
> Fixes: 237e7be0bf57 ("drm/i915/mtl: For DP2.0 10G and 20G rates use MPLLA")
> Signed-off-by: Suraj Kandpal <suraj.kandpal at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_cx0_phy.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> index e768dc6a15b3..3fd959a2773c 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> @@ -2747,7 +2747,7 @@ static void intel_program_port_clock_ctl(struct intel_encoder *encoder,
>  	/* TODO: HDMI FRL */
>  	/* DP2.0 10G and 20G rates enable MPLLA*/
>  	if (crtc_state->port_clock == 1000000 || crtc_state->port_clock == 2000000)
> -		val |= crtc_state->dpll_hw_state.cx0pll.ssc_enabled ? XELPDP_SSC_ENABLE_PLLA : 0;
> +		val |= XELPDP_SSC_ENABLE_PLLA;
>  	else
>  		val |= crtc_state->dpll_hw_state.cx0pll.ssc_enabled ? XELPDP_SSC_ENABLE_PLLB : 0;
>  
> -- 
> 2.34.1
>