January 2025 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Jan 1 15:39:14 UTC 2025
Ending: Fri Jan 31 23:49:35 UTC 2025
Messages: 2064

• [PATCH 3/8] mm/zswap: Use PG_dropbehind instead of PG_reclaim   Yosry Ahmed
• [PATCH 4/8] mm/swap: Use PG_dropbehind instead of PG_reclaim   Yosry Ahmed
• [PATCH 4/8] mm/swap: Use PG_dropbehind instead of PG_reclaim   Yosry Ahmed
• drm/i915/display: HDMI C10 PLL entry for 265250 MHz   Almahallawy, Khaled
• [PATCH 0/5] Add HDMI PLL Algorithm for SNPS/C10PHY   Almahallawy, Khaled
• [PATCH v4 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Bjorn Andersson
• [PATCH v4 4/4] drm/msm/dp: Add support for LTTPR handling   Bjorn Andersson
• [PATCH v2] drm/i915/selftests: Correct frequency handling in RPS power measurement   Anirban, Sk
• [PATCH v2] drm/i915/selftests: Correct frequency handling in RPS power measurement   Anirban, Sk
• [PATCH 0/2] drm/i915/selftests: Correct frequency handling in RPS power measurement   Sk Anirban
• [PATCH 1/2] drm/i915/selftests: Correct frequency handling in RPS power measurement   Sk Anirban
• [PATCH 2/2] drm/i915/guc/slpc: Add helper function slpc_measure_power   Sk Anirban
• [PATCH] drm/xe/xe3: Generate and store the L3 bank mask   Matt Atwood
• [RFC PATCH RESEND] iommu: intel: apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)   Mingcong Bai
• [PATCH v2] drm/ci: uprev IGT   Dmitry Baryshkov
• [PATCH v2] drm/ci: uprev IGT   Dmitry Baryshkov
• [PATCH v3 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Dmitry Baryshkov
• [PATCH v3 3/4] drm/i915/dp: Use the generic helper to control LTTPR transparent mode   Dmitry Baryshkov
• [PATCH v3 4/4] drm/msm/dp: Add support for LTTPR handling   Dmitry Baryshkov
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer   Dmitry Baryshkov
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer   Dmitry Baryshkov
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer   Dmitry Baryshkov
• [PATCH v3 3/4] drm/i915/dp: Use the generic helper to control LTTPR transparent mode   Dmitry Baryshkov
• [PATCH] drm/atomic-helpers: remove legacy_cursor_update hacks   Dmitry Baryshkov
• linux-next: build warnings after merge of the drm-misc tree   Dmitry Baryshkov
• [PATCH v7 01/14] drm: Define histogram structures exposed to user   Dmitry Baryshkov
• [PATCH v7 02/14] drm: Define ImageEnhancemenT LUT structures exposed to user   Dmitry Baryshkov
• [PATCH v7 07/14] drm/xe: Add histogram support to Xe builds   Dmitry Baryshkov
• [PATCH v7 07/14] drm/xe: Add histogram support to Xe builds   Dmitry Baryshkov
• [PATCH v7 02/14] drm: Define ImageEnhancemenT LUT structures exposed to user   Dmitry Baryshkov
• [PATCH v7 01/14] drm: Define histogram structures exposed to user   Dmitry Baryshkov
• [PATCH v7 02/14] drm: Define ImageEnhancemenT LUT structures exposed to user   Dmitry Baryshkov
• [PATCH v7 01/14] drm: Define histogram structures exposed to user   Dmitry Baryshkov
• [PATCH v7 01/14] drm: Define histogram structures exposed to user   Dmitry Baryshkov
• [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout   Dmitry Baryshkov
• [PATCH 2/3] drm/display/dp: Define function to setup Extended wake time   Dmitry Baryshkov
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer   Dmitry Baryshkov
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer   Dmitry Baryshkov
• [PATCH 2/3] drm/display/dp: Define function to setup Extended wake time   Dmitry Baryshkov
• [PATCH 3/3] drm/i915/guc/slpc: Print more SLPC debug status information   Belgaumkar, Vinay
• [PATCH 2/3] drm/i915/guc/slpc: Enable GuC SLPC default strategies   Belgaumkar, Vinay
• [PATCH v1] drm/i915/selftest: Change throttle criteria for rps   Belgaumkar, Vinay
• [PATCH 1/2] drm/i915/guc/slpc: Allow GuC SLPC default strategies on MTL+   Belgaumkar, Vinay
• [PATCH v2] drm/i915/slpc: Add sysfs for SLPC power profiles   Vinay Belgaumkar
• [PATCH i-g-t v2 0/4] tools/gputop: Add PMU stats   Belgaumkar, Vinay
• [PATCH v2] drm/i915/slpc: Add sysfs for SLPC power profiles   Belgaumkar, Vinay
• [PATCH v2] drm/i915/slpc: Add sysfs for SLPC power profiles   Belgaumkar, Vinay
• [PATCH v3] drm/i915/slpc: Add sysfs for SLPC power profiles   Vinay Belgaumkar
• [PATCH v4] drm/i915/slpc: Add sysfs for SLPC power profiles   Vinay Belgaumkar
• [PATCH i-g-t v4 0/2] tests/intel/xe_pmu: Add PMU tests   Vinay Belgaumkar
• [PATCH i-g-t v4 1/2] lib/igt_perf: Add utils to extract PMU event info   Vinay Belgaumkar
• [PATCH i-g-t v4 2/2] tests/xe/pmu: Add pmu tests   Vinay Belgaumkar
• [PATCH i-g-t v5 0/2] tests/intel/xe_pmu: Add PMU tests   Vinay Belgaumkar
• [PATCH i-g-t v5 1/2] lib/igt_perf: Add utils to extract PMU event info   Vinay Belgaumkar
• [PATCH i-g-t v5 2/2] tests/xe/pmu: Add pmu tests   Vinay Belgaumkar
• [PATCH i-g-t v6 0/2] tests/intel/xe_pmu: Add PMU tests   Vinay Belgaumkar
• [PATCH i-g-t v6 1/2] lib/igt_perf: Add utils to extract PMU event info   Vinay Belgaumkar
• [PATCH i-g-t v6 2/2] tests/xe/pmu: Add pmu tests   Vinay Belgaumkar
• [PATCH i-g-t v6 1/2] lib/igt_perf: Add utils to extract PMU event info   Belgaumkar, Vinay
• [PATCH i-g-t v7 0/3] tests/intel/xe_pmu: Add PMU tests   Vinay Belgaumkar
• [PATCH i-g-t v7 1/3] lib/igt_core: Add tolerance and measured_usleep utils   Vinay Belgaumkar
• [PATCH i-g-t v7 2/3] lib/igt_perf: Add utils to extract PMU event info   Vinay Belgaumkar
• [PATCH i-g-t v7 3/3] tests/xe/pmu: Add pmu tests for gt-c6   Vinay Belgaumkar
• [PATCH i-g-t v6 2/2] tests/xe/pmu: Add pmu tests   Belgaumkar, Vinay
• [PATCH i-g-t v7 3/3] tests/xe/pmu: Add pmu tests for gt-c6   Belgaumkar, Vinay
• RE: ✗ Fi.CI.BUILD: failure for Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"   Bhadane, Dnyaneshwar
• [PATCH] Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"   Bhadane, Dnyaneshwar
• [PATCH] Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"   Bhadane, Dnyaneshwar
• [PATCH] drm/i915/bios: Define eDP pipe joiner feature for VBT   Dnyaneshwar Bhadane
• [PATCH] drm/i915/bios: Define eDP pipe joiner feature for VBT   Bhadane, Dnyaneshwar
• [PATCH v3] drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE   Bhadane, Dnyaneshwar
• [PATCH] drm/i915: Add Wa_22010465259 in its respective WA list   Bhadane, Dnyaneshwar
• [PATCH v3] drm/i915: Add Wa_22010465259 in its respective WA list   Bhadane, Dnyaneshwar
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Ard Biesheuvel
• [RFC PATCH] drm/xe/display: Program double buffered LUT registers   Borah, Chaitanya Kumar
• [PATCH 3/9] drm/i915: Introduce plane->can_async_flip()   Borah, Chaitanya Kumar
• [PATCH v3 1/5] drm/plane: Add new plane property IN_FORMATS_ASYNC   Borah, Chaitanya Kumar
• [PATCH v3 2/5] drm/plane: Expose function to create format/modifier blob   Borah, Chaitanya Kumar
• [PATCH v3 3/5] drm/plane: Function to check async supported modifier/format   Borah, Chaitanya Kumar
• [PATCH v3 4/5] drm/i915/display: Populate list of async supported formats/modifiers   Borah, Chaitanya Kumar
• [PATCH v3 5/5] drm/i915/display: Add function for format_mod_supported_async   Borah, Chaitanya Kumar
• [PATCH v3 1/5] drm/plane: Add new plane property IN_FORMATS_ASYNC   Borah, Chaitanya Kumar
• [PATCH v3 2/5] drm/plane: Expose function to create format/modifier blob   Borah, Chaitanya Kumar
• Regression on linux-next (next-20250120)   Borah, Chaitanya Kumar
• Regression on linux-next (next-20250120)   Borah, Chaitanya Kumar
• [PATCH v3 2/5] drm/plane: Expose function to create format/modifier blob   Borah, Chaitanya Kumar
• [PATCH v3 2/5] drm/plane: Expose function to create format/modifier blob   Borah, Chaitanya Kumar
• [PATCH 11/11] drm/i915: Pimp plane debugs   Borah, Chaitanya Kumar
• Regression on linux-next (next-20250120)   Borah, Chaitanya Kumar
• Regression on linux-next (next-20250120)   Borah, Chaitanya Kumar
• [PATCH] drm/i915/dp: Return min bpc supported by source instead of 0   Borah, Chaitanya Kumar
• [PATCH] Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset"   Sebastian Brzezinka
• [PATCH v2] Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset"   Sebastian Brzezinka
• [PATCH] Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset"   Sebastian Brzezinka
• Re: ✗ i915.CI.BAT: failure for Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset" (rev2)   Sebastian Brzezinka
• [PATCH v1] drm/i915/guc: Always disable interrupt ahead of synchronize_irq   Sebastian Brzezinka
• [PATCH] drm/i915/selftests: avoid using uninitialized context   Sebastian Brzezinka
• [PATCH v3] Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset"   Sebastian Brzezinka
• [PATCHv3 02/11] drm/i915/gem: Convert __shmem_writeback() to folios   Shakeel Butt
• [PATCHv3 06/11] mm/vmscan: Use PG_dropbehind instead of PG_reclaim   Shakeel Butt
• [PATCH v3 3/5] drm/i915/scaler: Compute scaling factors for pipe scaler   Dan Carpenter
• [PATCH v3] drm/i915: Fix page cleanup on DMA remap failure   Cavitt, Jonathan
• [PATCH] drm/i915: Give i915 and xe each their own display tracepoints   Cavitt, Jonathan
• [PATCH 4/4] drm/uapi/fourcc: Document the Intel clear color alignment better   Chery, Nanley G
• Xe2 CCS modifiers have undocumented requirements   Chery, Nanley G
• [PATCH v2 2/3] drm/i915/display: Wrap IRQ-specific uncore functions   Luca Coelho
• [PATCH 1/4] drm/i915/dmc_wl: Pass offset instead of reg to range table iterator   Luca Coelho
• [PATCH 2/4] drm/i915/dmc_wl: Add debugfs for untracked offsets   Luca Coelho
• [PATCH 3/4] drm/i915/dmc_wl: Add extra_ranges debugfs   Luca Coelho
• [PATCH 4/4] drm/i915/dmc_wl: Enable the debugfs only with enable_dmc_wl_debugfs=1   Luca Coelho
• [PATCH 3/4] drm/i915/dmc_wl: Add extra_ranges debugfs   Luca Coelho
• [PATCH 4/4] drm/i915/dmc_wl: Enable the debugfs only with enable_dmc_wl_debugfs=1   Luca Coelho
• [PATCH 2/4] drm/i915/dmc_wl: Add debugfs for untracked offsets   Luca Coelho
• [PATCH] drm/i915/dmc_wl: Do not check for DMC payload   Luca Coelho
• [PATCH 00/63] Fix CONFIG_DRM_USE_DYNAMIC_DEBUG=y   Jim Cromie
• [PATCH 01/63] docs/dyndbg: update examples \012 to \n   Jim Cromie
• [PATCH 02/63] test-dyndbg: fixup CLASSMAP usage error   Jim Cromie
• [PATCH 03/63] dyndbg: reword "class unknown," to "class:_UNKNOWN_"   Jim Cromie
• [PATCH 04/63] dyndbg: make ddebug_class_param union members same size   Jim Cromie
• [PATCH 05/63] dyndbg: replace classmap list with a vector   Jim Cromie
• [PATCH 06/63] dyndbg: ddebug_apply_class_bitmap - add module arg, select on it   Jim Cromie
• [PATCH 07/63] dyndbg: split param_set_dyndbg_classes to _module & wrapper fns   Jim Cromie
• [PATCH 08/63] dyndbg: drop NUM_TYPE_ARRAY   Jim Cromie
• [PATCH 09/63] dyndbg: reduce verbose/debug clutter   Jim Cromie
• [PATCH 10/63] dyndbg: silence debugs with no-change updates   Jim Cromie
• [PATCH 11/63] dyndbg: tighten ddebug_class_name() 1st arg type   Jim Cromie
• [PATCH 12/63] dyndbg: tighten fn-sig of ddebug_apply_class_bitmap   Jim Cromie
• [PATCH 13/63] dyndbg: reduce verbose=3 messages in ddebug_add_module   Jim Cromie
• [PATCH 14/63] dyndbg-API: remove DD_CLASS_TYPE_(DISJOINT|LEVEL)_NAMES and code   Jim Cromie
• [PATCH 15/63] checkpatch: add an exception to the do-while wrapper advice   Jim Cromie
• [PATCH 16/63] dyndbg-API: replace DECLARE_DYNDBG_CLASSMAP   Jim Cromie
• [PATCH 17/63] dyndbg: check DYNDBG_CLASSMAP_DEFINE args at compile-time   Jim Cromie
• [PATCH 18/63] dyndbg: add/use for_subvec() to reduce boilerplate   Jim Cromie
• [PATCH 19/63] dyndbg: make proper substructs in _ddebug_info   Jim Cromie
• [PATCH 20/63] dyndbg: drop premature optimization in ddebug_add_module   Jim Cromie
• [PATCH 21/63] dyndbg: allow ddebug_add_module to fail   Jim Cromie
• [PATCH 22/63] dyndbg: rework ddebug_attach_*module_classes()   Jim Cromie
• [PATCH 23/63] dyndbg: fail modprobe on ddebug_class_range_overlap()   Jim Cromie
• [PATCH 24/63] dyndbg: hoist the range-overlap checks   Jim Cromie
• [PATCH 25/63] ddebug: cleanup-range-overlap fails   Jim Cromie
• [PATCH 26/63] dyndbg-test: change do_prints testpoint to accept a loopct   Jim Cromie
• [PATCH 27/63] selftests-dyndbg: add tools/testing/selftests/dynamic_debug/*   Jim Cromie
• [PATCH 28/63] dyndbg-API: promote DYNDBG_CLASSMAP_PARAM to API   Jim Cromie
• [PATCH 29/63] dyndbg-doc: add classmap info to howto   Jim Cromie
• [PATCH 30/63] dyndbg: treat comma as a token separator   Jim Cromie
• [PATCH 31/63] selftests-dyndbg: add comma_terminator_tests   Jim Cromie
• [PATCH 32/63] dyndbg: split multi-query strings with %   Jim Cromie
• [PATCH 33/63] selftests-dyndbg: test_percent_splitting   Jim Cromie
• [PATCH 34/63] docs/dyndbg: explain new delimiters: comma, percent   Jim Cromie
• [PATCH 35/63] selftests-dyndbg: add test_mod_submod   Jim Cromie
• [PATCH 36/63] docs/dyndbg: explain flags parse 1st   Jim Cromie
• [PATCH 37/63] dyndbg: change __dynamic_func_call_cls* macros into expressions   Jim Cromie
• [PATCH 38/63] dyndbg: drop "protection" of class'd pr_debugs from legacy queries   Jim Cromie
• [PATCH 39/63] drm: use correct ccflags-y spelling   Jim Cromie
• [PATCH 40/63] checkpatch: dont warn about unused macro arg on empty body   Jim Cromie
• [PATCH 41/63] drm-dyndbg: adapt drm core to use dyndbg classmaps-v2   Jim Cromie
• [PATCH 42/63] drm-dyndbg: adapt DRM to invoke DYNDBG_CLASSMAP_PARAM   Jim Cromie
• [PATCH 43/63] drm-print: fix config-dependent unused variable   Jim Cromie
• [PATCH 44/63] drm-dyndbg: DRM_CLASSMAP_USE in amdgpu driver   Jim Cromie
• [PATCH 45/63] drm-dyndbg: DRM_CLASSMAP_USE in i915 driver   Jim Cromie
• [PATCH 46/63] drm-dyndbg: DRM_CLASSMAP_USE in drm_crtc_helper   Jim Cromie
• [PATCH 47/63] drm-dyndbg: DRM_CLASSMAP_USE in drm_dp_helper   Jim Cromie
• [PATCH 48/63] drm-dyndbg: DRM_CLASSMAP_USE in nouveau   Jim Cromie
• [PATCH 49/63] drm-dyndbg: add DRM_CLASSMAP_USE to Xe driver   Jim Cromie
• [PATCH 50/63] drm-dyndbg: add DRM_CLASSMAP_USE to virtio_gpu   Jim Cromie
• [PATCH 51/63] drm-dyndbg: add DRM_CLASSMAP_USE to simpledrm   Jim Cromie
• [PATCH 52/63] drm-dyndbg: add DRM_CLASSMAP_USE to bochs   Jim Cromie
• [PATCH 53/63] drm-dyndbg: add DRM_CLASSMAP_USE to etnaviv   Jim Cromie
• [PATCH 54/63] drm-dyndbg: add DRM_CLASSMAP_USE to gma500 driver   Jim Cromie
• [PATCH 55/63] drm-dyndbg: add DRM_CLASSMAP_USE to radeon   Jim Cromie
• [PATCH 56/63] drm-dyndbg: add DRM_CLASSMAP_USE to vmwgfx driver   Jim Cromie
• [PATCH 57/63] drm-dyndbg: add DRM_CLASSMAP_USE to vkms driver   Jim Cromie
• [PATCH 58/63] drm-dyndbg: add DRM_CLASSMAP_USE to udl driver   Jim Cromie
• [PATCH 59/63] drm-dyndbg: add DRM_CLASSMAP_USE to mgag200 driver   Jim Cromie
• [PATCH 60/63] drm-dyndbg: add DRM_CLASSMAP_USE to the gud driver   Jim Cromie
• [PATCH 61/63] drm-dyndbg: add DRM_CLASSMAP_USE to the qxl driver   Jim Cromie
• [PATCH 62/63] drm-dyndbg: add DRM_CLASSMAP_USE to the drm_gem_shmem_helper driver   Jim Cromie
• [PATCH 63/63] drm: restore CONFIG_DRM_USE_DYNAMIC_DEBUG un-BROKEN   Jim Cromie
• [PATCH 64/64] This series fixes dyndbg (dynamic debug) classmap support for DRM.   Jim Cromie
• [PATCH v2 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers   Imre Deak
• [PATCH v2 07/16] drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST   Imre Deak
• [PATCH v2 10/16] drm/i915/ddi: write payload for 128b/132b SST   Imre Deak
• [PATCH v2 13/16] drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout   Imre Deak
• [PATCH v2 14/16] drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()   Imre Deak
• [PATCH v2 15/16] drm/i915/ddi: disable trancoder port select for 128b/132b SST   Imre Deak
• [PATCH v2 16/16] drm/i915/dp: compute config for 128b/132b SST w/o DSC   Imre Deak
• [PATCH v2 12/16] drm/i915/ddi: enable ACT handling for 128b/132b SST   Imre Deak
• [PATCH v3 10/16] drm/i915/ddi: write payload for 128b/132b SST   Imre Deak
• [PATCH v3 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers   Imre Deak
• [PATCH v3 12/16] drm/i915/ddi: enable ACT handling for 128b/132b SST   Imre Deak
• [PATCH 1/2] drm/i915/cx0: Fix SSC enablement in PORT_CLOCK_CTL   Imre Deak
• [PATCH 0/4] drm/i915/dp_mst: Fix error handling/clean up pointer use   Imre Deak
• [PATCH 1/5] drm/i915/dp_mst: Fix error handling while adding a connector   Imre Deak
• [PATCH 2/5] drm/i915/dp_mst: Use intel_connector vs. drm_connector pointer in intel_dp_mst.c   Imre Deak
• [PATCH 3/5] drm/i915/dp_mst: Simplify using to_intel_display() passing it an intel_connector pointer   Imre Deak
• [PATCH 4/5] drm/i915/dp_mst: Simplify getting a drm_device pointer needed by to_i915()   Imre Deak
• [PATCH 5/5] drm/i915/dp_mst: Use intel_display::platform.alderlake_p instead of IS_ALDERLAKE_P()   Imre Deak
• [PATCH 1/2] drm/i915/cx0: Fix SSC enablement in PORT_CLOCK_CTL   Imre Deak
• ✗ i915.CI.BAT: failure for drm/i915/dp_mst: Fix error handling/clean up pointer use   Imre Deak
• ✓ i915.CI.BAT: success for drm/i915/dp_mst: Fix error handling/clean up pointer use (rev2)   Imre Deak
• [PATCH] drm/xe/dp: Enable DP tunneling   Imre Deak
• [PATCH] drm/xe/dp: Enable DP tunneling   Imre Deak
• [PATCH v2] drm/xe/dp: Enable DP tunneling   Imre Deak
• [PATCH] drm/i915/dp: Correct max compressed bpp bounds by using link bpp   Imre Deak
• [PATCH] drm/xe/dp: Enable DP tunneling   Imre Deak
• [PATCH] drm/xe/dp: Fix non-display builds with DP tunnelling incorrectly enabled   Imre Deak
• [PATCH] drm/xe/dp: Enable DP tunneling   Imre Deak
• [PATCH] drm/xe/dp: Fix non-display builds with DP tunnelling incorrectly enabled   Imre Deak
• [PATCH] drm/xe/dp: Enable DP tunneling   Imre Deak
• [PATCH 00/17] drm/i915/ddi: Fix/simplify port enabling/disabling   Imre Deak
• [PATCH 01/17] drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro   Imre Deak
• [PATCH 02/17] drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL   Imre Deak
• [PATCH 03/17] drm/i915/ddi: Make all the PORT_WIDTH macros work the same way   Imre Deak
• [PATCH 04/17] drm/i915/ddi: Set missing TC DP PHY lane stagger delay in DDI_BUF_CTL   Imre Deak
• [PATCH 05/17] drm/i915/ddi: Simplify the port enabling via DDI_BUF_CTL   Imre Deak
• [PATCH 06/17] drm/i915/ddi: Simplify the port disabling via DDI_BUF_CTL   Imre Deak
• [PATCH 07/17] drm/i915/ddi: Simplify waiting for a port to idle via DDI_BUF_CTL   Imre Deak
• [PATCH 08/17] drm/i915/ddi: Move platform checks within mtl_ddi_enable/disable_d2d_link()   Imre Deak
• [PATCH 09/17] drm/i915/ddi: Unify the platform specific functions disabling a port   Imre Deak
• [PATCH 10/17] drm/i915/ddi: Add a helper to enable a port   Imre Deak
• [PATCH 11/17] drm/i915/ddi: Sanitize DDI_BUF_CTL register definitions   Imre Deak
• [PATCH 12/17] drm/i915/ddi: Configure/enable a port in DDI_BUF_CTL via read-modify-write   Imre Deak
• [PATCH 13/17] drm/i915/ddi: Factor out a helper to get DDI_BUF_CTL's config value   Imre Deak
• [PATCH 14/17] drm/i915/ddi: Reuse helper to compute the HDMI DDI_BUF_CTL config   Imre Deak
• [PATCH 15/17] drm/i915/ddi: Reuse helper to compute the HDMI PORT_BUF_CTL1 config   Imre Deak
• [PATCH 16/17] drm/i915/ddi: Move platform/encoder checks within adlp_tbt_to_dp_alt_switch_wa()   Imre Deak
• [PATCH 17/17] drm/i915/ddi: Unify the platform specific functions enabling a port   Imre Deak
• [PATCH 1/2] drm/i915/display: Drop crtc_state from C10/C20 pll programming   Imre Deak
• [PATCH 02/17] drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL   Imre Deak
• [PATCH 05/17] drm/i915/ddi: Simplify the port enabling via DDI_BUF_CTL   Imre Deak
• [PATCH 1/6] drm/i915/dp: constify struct link_config_limits pointers   Imre Deak
• [PATCH 2/6] drm/i915/dp: change the order of intel_dp_mtp_tu_compute_config() params   Imre Deak
• [PATCH 3/6] drm/i915/mst: change where lane_count and port_clock are set   Imre Deak
• [PATCH 4/6] drm/i915/mst: handle mst pbn_div in intel_dp_mtp_tu_compute_config()   Imre Deak
• [PATCH 5/6] drm/i915/mst: remove unnecessary mst_stream_find_vcpi_slots_for_bpp()   Imre Deak
• [PATCH 6/6] drm/i915/mst: use min_array() and max_array() instead of hand-rolling   Imre Deak
• [PATCH 6/6] drm/i915/mst: use min_array() and max_array() instead of hand-rolling   Imre Deak
• [PATCH 4/6] drm/i915/mst: handle mst pbn_div in intel_dp_mtp_tu_compute_config()   Imre Deak
• [PATCH 01/14] drm/i915/dp: Iterate DSC BPP from high to low on all platforms   Imre Deak
• [PATCH 02/14] drm/i915/dp: Add intel_dp_dsc_bpp_step_x16() helper to get DSC BPP precision   Imre Deak
• [PATCH 03/14] drm/i915/dp: Rename some variables in xelpd_dsc_compute_link_config()   Imre Deak
• [PATCH 04/14] drm/i915/dp: Pass .4 BPP values to {icl,xelpd}_dsc_compute_link_config()   Imre Deak
• [PATCH 05/14] drm/i915/dp: Move max DSC BPP reduction one level higher   Imre Deak
• [PATCH 06/14] drm/i915/dp: Change icl_dsc_compute_link_config() DSC BPP iteration   Imre Deak
• [PATCH 07/14] drm/i915/dp: Move force_dsc_fractional_bpp_en check to intel_dp_dsc_valid_bpp()   Imre Deak
• [PATCH 08/14] drm/i915/dp: Unify DSC link config functions   Imre Deak
• [PATCH 09/14] drm/i915/dp: Inline do_dsc_compute_compressed_bpp()   Imre Deak
• [PATCH 10/14] drm/i915/dp: Simplify input BPP checks in intel_dp_dsc_compute_pipe_bpp()   Imre Deak
• [PATCH 11/14] drm/i915/dp: Use int for compressed BPP in dsc_compute_link_config()   Imre Deak
• [PATCH 12/14] drm/i915/dp: Drop compute_pipe_bpp parameter from intel_dp_dsc_compute_config()   Imre Deak
• [PATCH 11/14] drm/i915/dp: Use int for compressed BPP in dsc_compute_link_config()   Imre Deak
• [PATCH 13/14] drm/i915/dp: Pass connector state all the way to dsc_compute_link_config()   Imre Deak
• [PATCH 14/14] drm/i915/mst: Convert intel_dp_mtp_tu_compute_config() to .4 format   Imre Deak
• [PATCH] drm/i915/display: Add skip link check quirk   Jonathan Denose
• [PATCH] drm/i915/display: Add skip link check quirk   Jonathan Denose
• [PATCH] drm/i915/display: Add skip link check quirk   Jonathan Denose
• [PATCH 2/3] drm/i915/guc/slpc: Enable GuC SLPC default strategies   Dixit, Ashutosh
• [PATCH 2/3] drm/i915/guc/slpc: Enable GuC SLPC default strategies   Dixit, Ashutosh
• [PATCH 2/3] drm/i915/guc/slpc: Enable GuC SLPC default strategies   Dixit, Ashutosh
• [PATCH] treewide: const qualify ctl_tables where applicable   Dixit, Ashutosh
• [PATCH] drm/i915/pmu: Remove i915_pmu_event_event_idx()   Dixit, Ashutosh
• [PATCH v1] drm/i915/guc: Always disable interrupt ahead of synchronize_irq   Zhanjun Dong
• [PATCH] drm/xe: Add missing SPDX license identifiers   Francois Dugast
• [PATCH] drm/xe: Add missing SPDX license identifiers   Francois Dugast
• Buiild error in i915/xe (was: [PATCH next 4/7] minmax.h: Use BUILD_BUG_ON_MSG() for the lo < hi test in clamp())   Pedro Falcato
• [PATCH 10/12] drm/{i915,xe}: Run DRM default client setup   Jocelyn Falempe
• [PATCH 10/12] drm/{i915,xe}: Run DRM default client setup   Jocelyn Falempe
• [PATCH] drm/i915: Add debug print about hw config table size   Julia Filipchuk
• [PATCH v2] drm/ci: uprev IGT   Helen Mae Koike Fornazier
• [BUG] The bottom and right edges on the tty are not shown on Apple T2 MacBooks with Retina display   Aditya Garg
• [BUG] The bottom and right edges on the tty are not shown on Apple T2 MacBooks with Retina display   Aditya Garg
• [BUG] The bottom and right edges on the tty are not shown on Apple T2 MacBooks with Retina display   Aditya Garg
• [PATCH 0/6] Introduce drm sharpness property   Nemesa Garg
• [PATCH 1/6] drm: Introduce sharpness strength property   Nemesa Garg
• [PATCH v6 2/6] drm/i915/display: Compute the scaler filter coefficients   Nemesa Garg
• [PATCH 3/6] drm/i915/display: Configure the scaler   Nemesa Garg
• [PATCH v7 4/6] drm/i915/display: Enable the second scaler for sharpness   Nemesa Garg
• [PATCH v6 5/6] drm/i915/display: Add registers and compute the strength   Nemesa Garg
• [PATCH 6/6] drm/i915/display: Load the lut values and enable sharpness   Nemesa Garg
• [PATCH 0/6] Introduce drm sharpness property   Nemesa Garg
• [PATCH 1/6] drm: Introduce sharpness strength property   Nemesa Garg
• [PATCH 2/6] drm/i915/display: Compute the scaler filter coefficients   Nemesa Garg
• [PATCH 3/6] drm/i915/display: Configure the scaler   Nemesa Garg
• [PATCH v8 4/6] drm/i915/display: Enable the second scaler for sharpness   Nemesa Garg
• [PATCH v7 5/6] drm/i915/display: Add registers and compute the strength   Nemesa Garg
• [PATCH v4 6/6] drm/i915/display: Load the lut values and enable sharpness   Nemesa Garg
• [PATCH 1/2] drm/i915/display: After joiner compute pfit_dst   Garg, Nemesa
• [PATCH] drm/i915: Fix page cleanup on DMA remap failure   Brian Geffon
• [PATCH] drm/i915: Fix page cleanup on DMA remap failure   Brian Geffon
• [PATCH] drm/i915: Fix page cleanup on DMA remap failure   Brian Geffon
• [PATCH] drm/i915: Fix page cleanup on DMA remap failure   Brian Geffon
• [PATCH v2] drm/i915: Fix page cleanup on DMA remap failure   Brian Geffon
• [PATCH v2] drm/i915: Fix page cleanup on DMA remap failure   Brian Geffon
• [PATCH v2] drm/i915: Fix page cleanup on DMA remap failure   Brian Geffon
• [PATCH v3] drm/i915: Fix page cleanup on DMA remap failure   Brian Geffon
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Thomas Gleixner
• [PATCH v3 0/5] Check Scaler and DSC Prefill Latency Against Vblank   Mitul Golani
• [PATCH v3 1/5] drm/i915/scaler: Add and compute scaling factors   Mitul Golani
• [PATCH v3 2/5] drm/i915/scaler: Use crtc_state to setup plane or pipe scaler   Mitul Golani
• [PATCH v3 3/5] drm/i915/scaler: Compute scaling factors for pipe scaler   Mitul Golani
• [PATCH v3 4/5] drm/i915/scaler: Check if vblank is sufficient for scaler   Mitul Golani
• [PATCH v3 5/5] drm/i915/dsc: Check if dsc prefill sufficient for vblank   Mitul Golani
• [PATCH v4 0/7] Check Scaler and DSC Prefill Latency Against Vblank   Mitul Golani
• [PATCH v4 1/7] drm/i915/scaler: Add and compute scaling factors   Mitul Golani
• [PATCH v4 2/7] drm/i915/scaler: Use crtc_state to setup plane or pipe scaler   Mitul Golani
• [PATCH v4 3/7] drm/i915/scaler: Refactor max_scale computation   Mitul Golani
• [PATCH v4 4/7] drm/i915/scaler: Compute scaling factors for pipe scaler   Mitul Golani
• [PATCH v4 5/7] drm/i915/scaler: Limit pipe scaler downscaling factors for YUV420   Mitul Golani
• [PATCH v4 6/7] drm/i915/scaler: Check if vblank is sufficient for scaler   Mitul Golani
• [PATCH v4 7/7] drm/i915/dsc: Check if vblank is sufficient for dsc prefill   Mitul Golani
• [PATCH v5 0/7] Check Scaler and DSC Prefill Latency Against Vblank   Mitul Golani
• [PATCH v5 1/7] drm/i915/scaler: Add and compute scaling factors   Mitul Golani
• [PATCH v5 2/7] drm/i915/scaler: Use crtc_state to setup plane or pipe scaler   Mitul Golani
• [PATCH v5 3/7] drm/i915/scaler: Refactor max_scale computation   Mitul Golani
• [PATCH v5 4/7] drm/i915/scaler: Compute scaling factors for pipe scaler   Mitul Golani
• [PATCH v5 5/7] drm/i915/scaler: Limit pipe scaler downscaling factors for YUV420   Mitul Golani
• [PATCH v5 6/7] drm/i915/scaler: Check if vblank is sufficient for scaler   Mitul Golani
• [PATCH v5 7/7] drm/i915/dsc: Check if vblank is sufficient for dsc prefill   Mitul Golani
• [PATCH v6 0/7] Check Scaler and DSC Prefill Latency Against Vblank   Mitul Golani
• [PATCH v6 1/7] drm/i915/scaler: Add and compute scaling factors   Mitul Golani
• [PATCH v6 2/7] drm/i915/scaler: Use crtc_state to setup plane or pipe scaler   Mitul Golani
• [PATCH v6 3/7] drm/i915/scaler: Refactor max_scale computation   Mitul Golani
• [PATCH v6 4/7] drm/i915/scaler: Compute scaling factors for pipe scaler   Mitul Golani
• [PATCH v6 5/7] drm/i915/scaler: Limit pipe scaler downscaling factors for YUV420   Mitul Golani
• [PATCH v6 6/7] drm/i915/scaler: Check if vblank is sufficient for scaler   Mitul Golani
• [PATCH v6 7/7] drm/i915/dsc: Check if vblank is sufficient for dsc prefill   Mitul Golani
• [PATCH v7 0/7] Check Scaler and DSC Prefill Latency Against Vblank   Mitul Golani
• [PATCH v7 1/7] drm/i915/scaler: Add and compute scaling factors   Mitul Golani
• [PATCH v7 2/7] drm/i915/scaler: Use crtc_state to setup plane or pipe scaler   Mitul Golani
• [PATCH v7 3/7] drm/i915/scaler: Refactor max_scale computation   Mitul Golani
• [PATCH v7 4/7] drm/i915/scaler: Compute scaling factors for pipe scaler   Mitul Golani
• [PATCH v7 5/7] drm/i915/scaler: Limit pipe scaler downscaling factors for YUV420   Mitul Golani
• [PATCH v7 6/7] drm/i915/scaler: Check if vblank is sufficient for scaler   Mitul Golani
• [PATCH v7 7/7] drm/i915/dsc: Check if vblank is sufficient for dsc prefill   Mitul Golani
• [PATCH v8 0/7] Check Scaler and DSC Prefill Latency Against Vblank   Mitul Golani
• [PATCH v8 1/7] drm/i915/scaler: Add and compute scaling factors   Mitul Golani
• [PATCH v8 2/7] drm/i915/scaler: Use crtc_state to setup plane or pipe scaler   Mitul Golani
• [PATCH v8 3/7] drm/i915/scaler: Refactor max_scale computation   Mitul Golani
• [PATCH v8 4/7] drm/i915/scaler: Compute scaling factors for pipe scaler   Mitul Golani
• [PATCH v8 5/7] drm/i915/scaler: Limit pipe scaler downscaling factors for YUV420   Mitul Golani
• [PATCH v8 6/7] drm/i915/scaler: Check if vblank is sufficient for scaler   Mitul Golani
• [PATCH v8 7/7] drm/i915/dsc: Check if vblank is sufficient for dsc prefill   Mitul Golani
• [PATCH v9 0/7] Check Scaler and DSC Prefill Latency Against Vblank   Mitul Golani
• [PATCH v9 1/7] drm/i915/scaler: Add and compute scaling factors   Mitul Golani
• [PATCH v9 2/7] drm/i915/scaler: Use crtc_state to setup plane or pipe scaler   Mitul Golani
• [PATCH v9 3/7] drm/i915/scaler: Refactor max_scale computation   Mitul Golani
• [PATCH v9 4/7] drm/i915/scaler: Compute scaling factors for pipe scaler   Mitul Golani
• [PATCH v9 5/7] drm/i915/scaler: Limit pipe scaler downscaling factors for YUV420   Mitul Golani
• [PATCH v9 6/7] drm/i915/scaler: Check if vblank is sufficient for scaler   Mitul Golani
• [PATCH v9 7/7] drm/i915/dsc: Check if vblank is sufficient for dsc prefill   Mitul Golani
• [PATCH v10 4/7] drm/i915/scaler: Compute scaling factors for pipe scaler   Mitul Golani
• [PATCH v6 0/6] Add AS_SDP to fastset   Mitul Golani
• [PATCH v6 1/6] drm/i915/vrr: Add crtc_state dump for vrr.vsync params   Mitul Golani
• [PATCH v6 2/6] drm/i915/vrr: Compute vrr.vsync_{start, end} during full modeset   Mitul Golani
• [PATCH v6 3/6] drm/i915/dp: fix the Adaptive sync Operation mode for SDP   Mitul Golani
• [PATCH v6 4/6] drm/i915/dp: Compute as_sdp.vtotal based on vrr timings   Mitul Golani
• [PATCH v6 5/6] drm/i915/dp: Compute as_sdp based on if vrr possible   Mitul Golani
• [PATCH v6 6/6] drm/i915/display: Move as sdp params change to fastset   Mitul Golani
• [RFC v2 1/6] drm/i915/scaler: Add and compute scaling factors   Golani, Mitulkumar Ajitkumar
• [PATCH v3 3/5] drm/i915/scaler: Compute scaling factors for pipe scaler   Golani, Mitulkumar Ajitkumar
• [PATCH v5 0/7] Check Scaler and DSC Prefill Latency Against Vblank   Golani, Mitulkumar Ajitkumar
• Re: ✗ i915.CI.Full: failure for Check Scaler and DSC Prefill Latency Against Vblank (rev8)   Golani, Mitulkumar Ajitkumar
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Alexander Gordeev
• Regression on linux-next (next-20250120)   Alexander Gordeev
• [PATCH v1 0/1] drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option   Nitin Gote
• [PATCH v1 1/1] drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option   Nitin Gote
• [PATCH v1 0/8] Fix all typos in i915   Nitin Gote
• [PATCH v1 1/8] drm/i915/gt: fix typos in i915/gt files.   Nitin Gote
• [PATCH v1 2/8] drm/i915/gvt: fix typos in i915/gvt files   Nitin Gote
• [PATCH v1 3/8] drm/i915/gem: fix typos in i915/gem files   Nitin Gote
• [PATCH v1 4/8] drm/i915/pxp: fix typos in i915/pxp files   Nitin Gote
• [PATCH v1 5/8] drm/i915/selftests: fix typos in i915/selftests files   Nitin Gote
• [PATCH v1 6/8] drm/i915/soc: fix typos in i915/soc files   Nitin Gote
• [PATCH v1 7/8] drm/i915/display: fix typos in i915/display files   Nitin Gote
• [PATCH v1 8/8] drm/i915: fix typos in drm/i915 files   Nitin Gote
• [PATCH v2 0/8] Fix all typos in i915   Nitin Gote
• [PATCH v2 1/8] drm/i915/gt: fix typos in i915/gt files.   Nitin Gote
• [PATCH v2 2/8] drm/i915/gvt: fix typos in i915/gvt files   Nitin Gote
• [PATCH v2 3/8] drm/i915/gem: fix typos in i915/gem files   Nitin Gote
• [PATCH v2 4/8] drm/i915/pxp: fix typos in i915/pxp files   Nitin Gote
• [PATCH v2 5/8] drm/i915/selftests: fix typos in i915/selftests files   Nitin Gote
• [PATCH v2 6/8] drm/i915/soc: fix typos in i915/soc files   Nitin Gote
• [PATCH v2 7/8] drm/i915/display: fix typos in i915/display files   Nitin Gote
• [PATCH v2 8/8] drm/i915: fix typos in drm/i915 files   Nitin Gote
• [PATCH v3 0/8] Fix all typos in i915   Nitin Gote
• [PATCH v3 1/8] drm/i915/gt: fix typos in i915/gt files.   Nitin Gote
• [PATCH v3 2/8] drm/i915/gvt: fix typos in i915/gvt files   Nitin Gote
• [PATCH v3 3/8] drm/i915/gem: fix typos in i915/gem files   Nitin Gote
• [PATCH v3 4/8] drm/i915/pxp: fix typos in i915/pxp files   Nitin Gote
• [PATCH v3 5/8] drm/i915/selftests: fix typos in i915/selftests files   Nitin Gote
• [PATCH v3 6/8] drm/i915/soc: fix typos in i915/soc files   Nitin Gote
• [PATCH v3 7/8] drm/i915/display: fix typos in i915/display files   Nitin Gote
• [PATCH v3 8/8] drm/i915: fix typos in drm/i915 files   Nitin Gote
• [PATCH v4 0/8] Fix all typos in i915   Nitin Gote
• [PATCH v4 1/8] drm/i915/gt: fix typos in i915/gt files.   Nitin Gote
• [PATCH v4 2/8] drm/i915/gvt: fix typos in i915/gvt files   Nitin Gote
• [PATCH v4 3/8] drm/i915/gem: fix typos in i915/gem files   Nitin Gote
• [PATCH v4 4/8] drm/i915/pxp: fix typos in i915/pxp files   Nitin Gote
• [PATCH v4 5/8] drm/i915/selftests: fix typos in i915/selftests files   Nitin Gote
• [PATCH v4 6/8] drm/i915/soc: fix typos in i915/soc files   Nitin Gote
• [PATCH v4 7/8] drm/i915/display: fix typos in i915/display files   Nitin Gote
• [PATCH v4 8/8] drm/i915: fix typos in drm/i915 files   Nitin Gote
• Re: ✗ i915.CI.Full: failure for drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option (rev2)   Gote, Nitin R
• [PATCH v1 7/8] drm/i915/display: fix typos in i915/display files   Gote, Nitin R
• [PATCH] drm/i915/gt: Replace kmap with its safer kmap_local_page counterpart   Gote, Nitin R
• Re: ✗ i915.CI.Full: failure for Fix all typos in i915 (rev5)   Gote, Nitin R
• Re: ✗ i915.CI.Full: failure for Fix all typos in i915 (rev6)   Gote, Nitin R
• [PATCH v3 0/4] drm/i915/xe3: FBC Dirty rect feature support   Vinod Govindapillai
• [PATCH v3 1/4] drm/i915/display: avoid calling fbc activate if fbc is active   Vinod Govindapillai
• [PATCH v3 2/4] drm/i915/xe: add register definitions for fbc dirty rect support   Vinod Govindapillai
• [PATCH v3 3/4] drm/i915/xe3: add dirty rect support for FBC   Vinod Govindapillai
• [PATCH v3 4/4] drm/i915/xe3: disable FBC if PSR2 selective fetch is enabled   Vinod Govindapillai
• [PATCH v3 1/4] drm/i915/display: avoid calling fbc activate if fbc is active   Govindapillai, Vinod
• [PATCH v4 0/6] drm/i915/xe3: FBC Dirty rect feature support   Vinod Govindapillai
• [PATCH v4 1/6] drm/i915/xe3: avoid calling fbc activate if fbc is active   Vinod Govindapillai
• [PATCH v4 2/6] drm/i915/xe3: add register definitions for fbc dirty rect support   Vinod Govindapillai
• [PATCH v4 3/6] drm/i915/xe3: disable FBC if PSR2 selective fetch is enabled   Vinod Govindapillai
• [PATCH v4 4/6] drm/i915/xe3: add dirty rect support for FBC   Vinod Govindapillai
• [PATCH v4 5/6] drm/i915/xe3: handle dirty rect update within the scope of DSB   Vinod Govindapillai
• [PATCH v4 6/6] drm/i915/xe3: introduce a dirty rectangle state variable   Vinod Govindapillai
• [PATCH v4 5/6] drm/i915/xe3: handle dirty rect update within the scope of DSB   Govindapillai, Vinod
• [PATCH v4 1/6] drm/i915/xe3: avoid calling fbc activate if fbc is active   Govindapillai, Vinod
• [PATCH v5 0/7] drm/i915/xe3: FBC Dirty rect feature support   Vinod Govindapillai
• [PATCH v5 1/7] drm/i915/xe3: add register definitions for fbc dirty rect support   Vinod Govindapillai
• [PATCH v5 2/7] drm/i915/xe3: introduce HAS_FBC_DIRTY_RECT() for FBC dirty rect support   Vinod Govindapillai
• [PATCH v5 3/7] drm/i915/display: get old_plane_state to the check_plane routine   Vinod Govindapillai
• [PATCH v5 4/7] drm/i915/display: update and store the plane damage clips   Vinod Govindapillai
• [PATCH v5 5/7] drm/i915/xe3: avoid calling fbc activate if fbc is active   Vinod Govindapillai
• [PATCH v5 6/7] drm/i915/xe3: dirty rect support for FBC   Vinod Govindapillai
• [PATCH v5 7/7] drm/i915/xe3: disable FBC if PSR2 selective fetch is enabled   Vinod Govindapillai
• [PATCH v5 4/7] drm/i915/display: update and store the plane damage clips   Govindapillai, Vinod
• [PATCH v6 0/7] drm/i915/xe3: FBC Dirty rect feature support   Vinod Govindapillai
• [PATCH v6 1/7] drm/i915/xe3: add register definitions for fbc dirty rect support   Vinod Govindapillai
• [PATCH v6 2/7] drm/i915/xe3: introduce HAS_FBC_DIRTY_RECT() for FBC dirty rect support   Vinod Govindapillai
• [PATCH v6 3/7] drm/damage-helper: add const qualifier in drm_atomic_helper_damage_merged()   Vinod Govindapillai
• [PATCH v6 4/7] drm/i915/xe3: update and store the plane damage clips   Vinod Govindapillai
• [PATCH v6 5/7] drm/i915/xe3: dirty rect support for FBC   Vinod Govindapillai
• [PATCH v6 6/7] drm/i915/xe3: avoid calling fbc activate if fbc is active   Vinod Govindapillai
• [PATCH v6 7/7] drm/i915/xe3: disable FBC if PSR2 selective fetch is enabled   Vinod Govindapillai
• [PATCH] drm/i915/display: implement wa_18038517565   Vinod Govindapillai
• [PATCH] treewide: const qualify ctl_tables where applicable   Joel Granados
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Joel Granados
• ✗ Fi.CI.CHECKPATCH: warning for treewide: const qualify ctl_tables where applicable (rev2)   Joel Granados
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Joel Granados
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Joel Granados
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Joel Granados
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Joel Granados
• [PATCH] drm/i915: Add debug print about hw config table size   John Harrison
• [PATCH] drm/i915/guc: Debug print LRC state entries only if the context is pinned   John Harrison
• [PATCH] drm/i915/uc: Include requested frequency in slow firmware load messages   John Harrison
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Baoquan He
• [PATCH 1/2] drm/xe/display: Unify DPT mapping   Juha-Pekka Heikkila
• [PATCH 2/2] drm/xe/display: Move dpt allocation to helper   Juha-Pekka Heikkila
• [PATCH 0/4] drm/i915: Drop 64bpp YUV formats for SDR planes and improve tracepoints   Juha-Pekka Heikkilä
• [PATCH] drm/i915/display: Disable AuxCCS framebuffers if built for Xe   Juha-Pekka Heikkilä
• [PATCH] drm/i915/display: Disable AuxCCS framebuffers if built for Xe   Juha-Pekka Heikkilä
• [PULL] drm-xe-fixes   Thomas Hellstrom
• [PULL] drm-xe-fixes   Thomas Hellstrom
• [PULL] drm-xe-fixes   Thomas Hellstrom
• [PULL] drm-xe-fixes   Thomas Hellström
• [PATCHv2 11/11] mm: Rename PG_dropbehind to PG_reclaim   Christoph Hellwig
• [PATCH 1/2] mm/vmalloc: Introduce vmap_file()   Christoph Hellwig
• [PATCH 0/2] vmalloc: Introduce vmap_file()   Christoph Hellwig
• [PATCH 1/8] drm/i915/gem: Convert __shmem_writeback() to folios   David Hildenbrand
• [PATCH 2/8] drm/i915/gem: Use PG_dropbehind instead of PG_reclaim   David Hildenbrand
• [PATCH 3/8] mm/zswap: Use PG_dropbehind instead of PG_reclaim   David Hildenbrand
• [PATCH 4/8] mm/swap: Use PG_dropbehind instead of PG_reclaim   David Hildenbrand
• [PATCH 5/8] mm/vmscan: Use PG_dropbehind instead of PG_reclaim   David Hildenbrand
• [PATCH 6/8] mm/vmscan: Use PG_dropbehind instead of PG_reclaim in shrink_folio_list()   David Hildenbrand
• [PATCH 7/8] mm/mglru: Check PG_dropcache instead of PG_reclaim in lru_gen_folio_seq()   David Hildenbrand
• [PATCH 8/8] mm: Remove PG_reclaim   David Hildenbrand
• [PATCH v3] drm/i915/cmtg: Disable the CMTG   Hogander, Jouni
• [PATCH v3 3/6] drm/i915/lobf: Update lobf if any change in dependent parameters   Hogander, Jouni
• [PATCH v3 4/6] drm/i915/lobf: Add debug interface for lobf   Hogander, Jouni
• [PATCH v3 5/6] drm/i915/lobf: Check for sink error and disable LOBF   Hogander, Jouni
• [PATCH 1/3] drm/i915/display: Use display MMIO functions in intel_display_irq.c   Hogander, Jouni
• [PATCH 3/3] drm/i915/dmc_wl: Track pipe interrupt registers   Hogander, Jouni
• [PATCH v3 06/10] drm/i915/psr: Allow writing PSR2_MAN_TRK_CTL using DSB   Hogander, Jouni
• [PATCH v3 10/10] drm/i915/psr: Allow DSB usage when PSR is enabled   Hogander, Jouni
• Re: ✗ i915.CI.Full: failure for Panel Replay mode change without full modeset   Hogander, Jouni
• [PATCH 4/4] drm/i915/psr: Allow changing Panel Replay mode without full modeset   Hogander, Jouni
• [PATCH v3 10/10] drm/i915/psr: Allow DSB usage when PSR is enabled   Hogander, Jouni
• [PATCH v3 10/10] drm/i915/psr: Allow DSB usage when PSR is enabled   Hogander, Jouni
• [PATCH v4 10/13] drm/i915/psr: Remove DSB_SKIP_WAITS_EN chicken bit   Hogander, Jouni
• [PATCH v4 11/13] drm/i915/display: Evade scanline 0 as well if PSR1 or PSR2 is enabled   Hogander, Jouni
• [PATCH v4 09/13] drm/i915/display: Don't use DSB if psr mode changing   Hogander, Jouni
• [PATCH v4 12/13] drm/i915/display: Ensure we have "Frame Change" event in DSB commit   Hogander, Jouni
• [PATCH v4 09/13] drm/i915/display: Don't use DSB if psr mode changing   Hogander, Jouni
• [PATCH v4 09/13] drm/i915/display: Don't use DSB if psr mode changing   Hogander, Jouni
• [PATCH v4 11/13] drm/i915/display: Evade scanline 0 as well if PSR1 or PSR2 is enabled   Hogander, Jouni
• [PATCH v4 11/13] drm/i915/display: Evade scanline 0 as well if PSR1 or PSR2 is enabled   Hogander, Jouni
• [PATCH v3 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Johan Hovold
• [PATCH v3 4/4] drm/msm/dp: Add support for LTTPR handling   Johan Hovold
• [PATCH v10 0/4] Introduce DRM device wedged event   Xaver Hugl
• [PATCH v10 2/4] drm/doc: Document device wedged event   Xaver Hugl
• [PATCH v2 0/9] PSR DSB support   Jouni Högander
• [PATCH v2 1/9] drm/i915/psr: Use PSR2_MAN_TRK_CTL CFF bit only to send full update   Jouni Högander
• [PATCH v2 2/9] drm/i915/psr: Rename psr_force_hw_tracking_exit as intel_psr_force_update   Jouni Högander
• [PATCH v2 3/9] drm/i915/psr: Split setting sff and cff bits away from intel_psr_force_update   Jouni Högander
• [PATCH v2 4/9] drm/i915/psr: Add register definitions for SFF_CTL and CFF_CTL registers   Jouni Högander
• [PATCH v2 5/9] drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards   Jouni Högander
• [PATCH v2 6/9] drm/i915/psr: Allow writing PSR2_MAN_TRK_CTL using DSB   Jouni Högander
• [PATCH v2 7/9] drm/i915/psr: Changes for PSR2_MAN_TRK_CTL handling when DSB is in use   Jouni Högander
• [PATCH v2 8/9] drm/i915/psr: Remove DSB_SKIP_WAITS_EN chicken bit   Jouni Högander
• [PATCH v2 9/9] drm/i915/psr: Allow DSB usage when PSR is enabled   Jouni Högander
• [PATCH v3 00/10] PSR DSB support   Jouni Högander
• [PATCH v3 01/10] drm/i915/psr: Use PSR2_MAN_TRK_CTL CFF bit only to send full update   Jouni Högander
• [PATCH v3 02/10] drm/i915/psr: Rename psr_force_hw_tracking_exit as intel_psr_force_update   Jouni Högander
• [PATCH v3 03/10] drm/i915/psr: Split setting sff and cff bits away from intel_psr_force_update   Jouni Högander
• [PATCH v3 04/10] drm/i915/psr: Add register definitions for SFF_CTL and CFF_CTL registers   Jouni Högander
• [PATCH v3 05/10] drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards   Jouni Högander
• [PATCH v3 06/10] drm/i915/psr: Allow writing PSR2_MAN_TRK_CTL using DSB   Jouni Högander
• [PATCH v3 07/10] drm/i915/psr: Changes for PSR2_MAN_TRK_CTL handling when DSB is in use   Jouni Högander
• [PATCH v3 08/10] drm/i915/psr: Add intel_psr_is_psr_mode_changing   Jouni Högander
• [PATCH v3 09/10] drm/i915/display: Don't use DSB if psr mode changing   Jouni Högander
• [PATCH v3 10/10] drm/i915/psr: Allow DSB usage when PSR is enabled   Jouni Högander
• [PATCH 0/4] Panel Replay mode change without full modeset   Jouni Högander
• [PATCH 1/4] drm/i915/psr: Add new function for writing sink panel replay enable bit   Jouni Högander
• [PATCH 2/4] drm/i915/psr: Enable Panel Replay on sink always when it's supported   Jouni Högander
• [PATCH 3/4] drm/i915/psr: Make intel_psr_enable_sink as local static function   Jouni Högander
• [PATCH 4/4] drm/i915/psr: Allow changing Panel Replay mode without full modeset   Jouni Högander
• [PATCH v4 00/13] PSR DSB support   Jouni Högander
• [PATCH v4 01/13] drm/i915/psr: Use PSR2_MAN_TRK_CTL CFF bit only to send full update   Jouni Högander
• [PATCH v4 02/13] drm/i915/psr: Rename psr_force_hw_tracking_exit as intel_psr_force_update   Jouni Högander
• [PATCH v4 03/13] drm/i915/psr: Split setting sff and cff bits away from intel_psr_force_update   Jouni Högander
• [PATCH v4 04/13] drm/i915/psr: Add register definitions for SFF_CTL and CFF_CTL registers   Jouni Högander
• [PATCH v4 05/13] drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards   Jouni Högander
• [PATCH v4 06/13] drm/i915/psr: Allow writing PSR2_MAN_TRK_CTL using DSB   Jouni Högander
• [PATCH v4 07/13] drm/i915/psr: Changes for PSR2_MAN_TRK_CTL handling when DSB is in use   Jouni Högander
• [PATCH v4 08/13] drm/i915/psr: Add intel_psr_is_psr_mode_changing   Jouni Högander
• [PATCH v4 09/13] drm/i915/display: Don't use DSB if psr mode changing   Jouni Högander
• [PATCH v4 10/13] drm/i915/psr: Remove DSB_SKIP_WAITS_EN chicken bit   Jouni Högander
• [PATCH v4 11/13] drm/i915/display: Evade scanline 0 as well if PSR1 or PSR2 is enabled   Jouni Högander
• [PATCH v4 12/13] drm/i915/display: Ensure we have "Frame Change" event in DSB commit   Jouni Högander
• [PATCH v4 13/13] drm/i915/psr: Allow DSB usage when PSR is enabled   Jouni Högander
• [PATCH v5 00/13] PSR DSB support   Jouni Högander
• [PATCH v5 01/13] drm/i915/psr: Use PSR2_MAN_TRK_CTL CFF bit only to send full update   Jouni Högander
• [PATCH v5 02/13] drm/i915/psr: Rename psr_force_hw_tracking_exit as intel_psr_force_update   Jouni Högander
• [PATCH v5 03/13] drm/i915/psr: Split setting sff and cff bits away from intel_psr_force_update   Jouni Högander
• [PATCH v5 04/13] drm/i915/psr: Add register definitions for SFF_CTL and CFF_CTL registers   Jouni Högander
• [PATCH v5 05/13] drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards   Jouni Högander
• [PATCH v5 06/13] drm/i915/psr: Allow writing PSR2_MAN_TRK_CTL using DSB   Jouni Högander
• [PATCH v5 07/13] drm/i915/psr: Changes for PSR2_MAN_TRK_CTL handling when DSB is in use   Jouni Högander
• [PATCH v5 08/13] drm/i915/psr: Add intel_psr_is_psr_mode_changing   Jouni Högander
• [PATCH v5 09/13] drm/i915/display: Don't use DSB if psr mode changing   Jouni Högander
• [PATCH v5 10/13] drm/i915/psr: Remove DSB_SKIP_WAITS_EN chicken bit   Jouni Högander
• [PATCH v5 11/13] drm/i915/display: Evade scanline 0 as well if PSR1 or PSR2 is enabled   Jouni Högander
• [PATCH v5 12/13] drm/i915/display: Ensure we have "Frame Change" event in DSB commit   Jouni Högander
• [PATCH v5 13/13] drm/i915/psr: Allow DSB usage when PSR is enabled   Jouni Högander
• [PATCH v6 00/12] PSR DSB support   Jouni Högander
• [PATCH v6 01/12] drm/i915/psr: Use PSR2_MAN_TRK_CTL CFF bit only to send full update   Jouni Högander
• [PATCH v6 02/12] drm/i915/psr: Rename psr_force_hw_tracking_exit as intel_psr_force_update   Jouni Högander
• [PATCH v6 03/12] drm/i915/psr: Split setting sff and cff bits away from intel_psr_force_update   Jouni Högander
• [PATCH v6 04/12] drm/i915/psr: Add register definitions for SFF_CTL and CFF_CTL registers   Jouni Högander
• [PATCH v6 05/12] drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards   Jouni Högander
• [PATCH v6 06/12] drm/i915/psr: Allow writing PSR2_MAN_TRK_CTL using DSB   Jouni Högander
• [PATCH v6 07/12] drm/i915/psr: Changes for PSR2_MAN_TRK_CTL handling when DSB is in use   Jouni Högander
• [PATCH v6 08/12] drm/i915/psr: Remove DSB_SKIP_WAITS_EN chicken bit   Jouni Högander
• [PATCH v6 09/12] drm/i915/display: Evade scanline 0 as well if PSR1 or PSR2 is enabled   Jouni Högander
• [PATCH v6 10/12] drm/i915/psr: Add function for triggering "Frame Change" event   Jouni Högander
• [PATCH v6 11/12] drm/i915/display: Ensure we have "Frame Change" event in DSB commit   Jouni Högander
• [PATCH v6 12/12] drm/i915/psr: Allow DSB usage when PSR is enabled   Jouni Högander
• RE: ✗ i915.CI.BAT: failure for drm/i915/selftests: avoid using uninitialized context (rev3)   Illipilli, TejasreeX
• [PATCH v4 02/11] mtd: add driver for intel graphics non-volatile memory device   Christophe JAILLET
• [PATCH v4 03/11] mtd: intel-dg: implement region enumeration   Christophe JAILLET
• [PATCH v1] drm/i915/selftest: Change throttle criteria for rps   Raag Jadav
• [PATCH v1] drm/i915/selftest: Change throttle criteria for rps   Raag Jadav
• [PATCH] drm/xe: remove unused xe_pciids.h harder, add missing PCI ID   Raag Jadav
• [PATCH v1] drm/i915/selftest: Change throttle criteria for rps   Raag Jadav
• [PATCH v2] drm/i915: Add Wa_22010465259 in its respective WA list   Raag Jadav
• [PATCH v10 0/4] Introduce DRM device wedged event   Raag Jadav
• [PATCH v10 2/4] drm/doc: Document device wedged event   Raag Jadav
• [PATCH v11 0/5] Introduce DRM device wedged event   Raag Jadav
• [PATCH v11 1/5] drm: Introduce device wedged event   Raag Jadav
• [PATCH v11 2/5] drm/doc: Document device wedged event   Raag Jadav
• [PATCH v11 3/5] drm/xe: Use device wedged event   Raag Jadav
• [PATCH v11 4/5] drm/i915: Use device wedged event   Raag Jadav
• [PATCH v11 5/5] drm/amdgpu: Use device wedged event   Raag Jadav
• [PATCH v10 2/4] drm/doc: Document device wedged event   Raag Jadav
• [PATCH v10 2/4] drm/doc: Document device wedged event   Raag Jadav
• [PATCH 6/6] drm/i915/mst: use min_array() and max_array() instead of hand-rolling   Raag Jadav
• [PATCH] drm/i915/gt: Handle INTEL_WAKEREF_DEF return value in gen8_ggtt_bind_get_ce   Ingyu Jang
• [PATCH] drm/i915/display: Add WA_14018221282   Kahola, Mika
• [PATCH 1/4] drm/i915/psr: Add new function for writing sink panel replay enable bit   Kahola, Mika
• [PATCH 2/4] drm/i915/psr: Enable Panel Replay on sink always when it's supported   Kahola, Mika
• [PATCH 3/4] drm/i915/psr: Make intel_psr_enable_sink as local static function   Kahola, Mika
• [PATCH 4/4] drm/i915/psr: Allow changing Panel Replay mode without full modeset   Kahola, Mika
• [PATCH 0/2] drm/i915/display: Allow display PHYs to reset power state   Mika Kahola
• [PATCH 1/2] drm/i915/display: Drop crtc_state from C10/C20 pll programming   Mika Kahola
• [PATCH 2/2] drm/i915/display: Allow display PHYs to reset power state   Mika Kahola
• [PATCH 1/2] drm/i915/display: Drop crtc_state from C10/C20 pll programming   Kahola, Mika
• [PATCH 2/2] drm/i915/display: Allow display PHYs to reset power state   Kahola, Mika
• [PATCH 0/2] Clean and Optimise mtl_ddi_prepare_link_retrain   Suraj Kandpal
• [PATCH 1/2] drm/i915/dp: Use intel_display instead of drm_i915_private   Suraj Kandpal
• [PATCH 2/2] drm/i915/ddi: Optimize mtl_port_buf_ctl_program   Suraj Kandpal
• [PATCHv4] drm/i915/dp: Guarantee a minimum HBlank time   Kandpal, Suraj
• [PATCH] drm/i915/dp: Return early if dsc is required but not supported   Kandpal, Suraj
• [PATCH v5] drm/i915/dp: Guarantee a minimum HBlank time   Kandpal, Suraj
• [PATCH] Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"   Suraj Kandpal
• [PATCH 0/2] SSC enablement in port clock programming   Suraj Kandpal
• [PATCH 1/2] drm/i915/cx0: Fix SSC enablement in PORT_CLOCK_CTL   Suraj Kandpal
• [PATCH 2/2] drm/i915/cx0: Set ssc_enabled for c20 too   Suraj Kandpal
• [PATCH v3] drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY   Kandpal, Suraj
• [PATCH 1/2] drm/i915/cx0: Fix SSC enablement in PORT_CLOCK_CTL   Kandpal, Suraj
• [PATCH 1/5] drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2   Kandpal, Suraj
• [PATCH 2/5] drm/i915/snps_phy: Use HDMI PLL algorithm for DG2   Kandpal, Suraj
• [PATCH 3/5] drm/i915/cx0_phy_regs: Add C10 registers bits   Kandpal, Suraj
• [PATCH 4/5] drm/i915/intel_snps_hdmi_pll: Compute C10 HDMI PLLs with algorithm   Kandpal, Suraj
• [PATCH v7 14/14] drm/i915/histogram: Enable pipe dithering   Kandpal, Suraj
• [PATCH 5/5] drm/i915/cx0_phy: Use HDMI PLL algorithm for C10 PHY   Kandpal, Suraj
• [PATCH 1/2] drm/i915/cx0: Fix SSC enablement in PORT_CLOCK_CTL   Kandpal, Suraj
• [PATCH v2] drm/xe/dp: Enable DP tunneling   Kandpal, Suraj
• [PATCH] drm/i915/hdcp: Use correct function to check if encoder is HDMI   Suraj Kandpal
• [PATCH] drm/i915/hdcp: Use correct function to check if encoder is HDMI   Suraj Kandpal
• [PATCH] drm/i915/hdcp: Use correct function to check if encoder is HDMI   Kandpal, Suraj
• [PATCH] drm/i915/hdcp: Use correct function to check if encoder is HDMI   Suraj Kandpal
• RE: ✗ i915.CI.Full: failure for drm/i915/hdcp: Fix Repeater authentication during topology change   Kandpal, Suraj
• [PATCH 0/2] Extended Wake Timeout   Suraj Kandpal
• [PATCH 1/2] drm/dp: Add the DPCD register required for Extended wake timeout   Suraj Kandpal
• [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout   Suraj Kandpal
• [PATCH 1/5] drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2   Kandpal, Suraj
• [PATCH] drm/xe/dp: Fix non-display builds with DP tunnelling incorrectly enabled   Kandpal, Suraj
• [PATCH 2/2] drm/i915/lttpr: Enable Extended Wake Timeout   Kandpal, Suraj
• RE: ✗ i915.CI.Full: failure for drm/i915/hdcp: Use correct function to check if encoder is HDMI (rev3)   Kandpal, Suraj
• [PATCH] drm/i915/hdcp: Use correct function to check if encoder is HDMI   Kandpal, Suraj
• [PATCH 0/3] Extended Wake Timeout   Suraj Kandpal
• [PATCH 1/3] drm/dp: Add the DPCD register required for Extended wake timeout   Suraj Kandpal
• [PATCH 2/3] drm/display/dp: Define function to setup Extended wake time   Suraj Kandpal
• [PATCH 3/3] drm/i915/lttpr: Enable Extended Wake Timeout   Suraj Kandpal
• [PATCH] drm/i915/cx0: Set ssc_enabled for c20 too   Suraj Kandpal
• [PATCH 0/3] Extended Wake Timeout   Suraj Kandpal
• [PATCH 1/3] drm/dp: Add the DPCD register required for Extended wake timeout   Suraj Kandpal
• [PATCH 2/3] drm/display/dp: Define function to setup Extended wake time   Suraj Kandpal
• [PATCH 3/3] drm/i915/lttpr: Enable Extended Wake Timeout   Suraj Kandpal
• [PATCH 0/7] Enable Aux based Nits brightness control for eDP   Suraj Kandpal
• [PATCH 1/7] drm/dp: Add eDP 1.5 bit definition   Suraj Kandpal
• [PATCH 2/7] drm/i915/backlight: Use proper interface based on eDP version   Suraj Kandpal
• [PATCH 3/7] drm/i915/backlight: Check Nits based brightness control for VESA   Suraj Kandpal
• [PATCH 4/7] drm/i915/backlight: Modify function to get VESA brightness in NITS   Suraj Kandpal
• [PATCH 5/7] drm/i915/backlight: Add function to change brightness in NITS for VESA   Suraj Kandpal
• [PATCH 6/7] drm/i915/backlight: Setup NITS based brightness via VESA   Suraj Kandpal
• [PATCH 7/7] drm/i915/backlight: Enable Nits based brightness   Suraj Kandpal
• [PATCH] drm/i915/dp: Return min bpc supported by source instead of 0   Kandpal, Suraj
• [PATCH] drm/i915: Add VM_DONTEXPAND to exported buffers   Krzysztof Karas
• [PATCH] drm/i915: Add VM_DONTEXPAND to exported buffers   Krzysztof Karas
• [PATCH] drm/i915/guc: Debug print LRC state entries only if the context is pinned   Krzysztof Karas
• [PATCH] drm/i915/gt: Ensure irqs' status does not change with spin_unlock   Krzysztof Karas
• [PATCH] drm/i915: replace in_atomic() with manually set flag   Krzysztof Karas
• [PATCH] drm/i915/gt: Replace kmap with its safer kmap_local_page counterpart   Krzysztof Karas
• [PATCH] drm/i915/gt: Ensure irqs' status does not change with spin_unlock   Krzysztof Karas
• [PATCH v2] drm/i915/gt: Ensure irqs' status does not change with spin_unlock   Krzysztof Karas
• [PATCH v2] drm/i915/gt: Ensure irqs' status does not change with spin_unlock   Krzysztof Karas
• [PATCH v3] drm/i915/gt: Use spin_lock_irqsave() in interruptible context   Krzysztof Karas
• [PATCH] drm/i915/uc: Include requested frequency in slow firmware load messages   Krzysztof Karas
• [RESEND 1/2] drm/i915/dsc: Use helper to calculate range_bpg_offset   Krzysztof Karas
• [PATCH] drm/i915/uc: Include requested frequency in slow firmware load messages   Krzysztof Karas
• ✗ i915.CI.BAT: failure for drm/i915/gt: Use spin_lock_irqsave() in interruptible context   Krzysztof Karas
• [PATCH] drm/i915/gt: Handle INTEL_WAKEREF_DEF return value in gen8_ggtt_bind_get_ce   Krzysztof Karas
• [PATCH v2] Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset"   Krzysztof Karas
• [PATCH] drm/i915/selftests: avoid using uninitialized context   Krzysztof Karas
• [PATCH v2] Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset"   Krzysztof Karas
• ✗ i915.CI.BAT: failure for drm/i915/selftests: avoid using uninitialized context   Krzysztof Karas
• [PATCH] drm/i915: replace in_atomic() with manually set flag   Krzysztof Karas
• [PATCH] drm/i915/selftests: avoid using uninitialized context   Krzysztof Karas
• [PATCH v2] drm/i915/selftests: avoid using uninitialized context   Krzysztof Karas
• [PATCH v2] drm/i915/selftests: avoid using uninitialized context   Krzysztof Karas
• [PATCH v2] drm/i915/selftests: avoid using uninitialized context   Krzysztof Karas
• [PATCH v3] drm/i915/selftests: avoid using uninitialized context   Krzysztof Karas
• ✗ i915.CI.BAT: failure for drm/i915/selftests: avoid using uninitialized context (rev3)   Krzysztof Karas
• [PATCH] drm/i915/dmc_wl: Do not check for DMC payload   Krzysztof Karas
• [PATCH i-g-t v7 3/3] tests/xe/pmu: Add pmu tests for gt-c6   Kamil Konieczny
• Regression on linux-next (next-20250120)   Greg Kroah-Hartman
• Regression on linux-next (next-20250120)   Greg Kroah-Hartman
• Regression on linux-next (next-20250120)   Greg Kroah-Hartman
• [PATCH v4 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Abhinav Kumar
• [PATCH v4 4/4] drm/msm/dp: Add support for LTTPR handling   Abhinav Kumar
• Trivial patch to run through CI   Christian König
• [PATCH 1/2] drm/ttm: test private resv obj on release/destroy   Christian König
• [PATCH 2/2] drm/amdgpu: remove all KFD fences from the BO on release   Christian König
• [PATCH] drm/i915: Add VM_DONTEXPAND to exported buffers   Joonas Lahtinen
• [PULL] drm-intel-gt-next   Joonas Lahtinen
• [PATCH v4 3/8] drm/i915/gem: fix typos in i915/gem files   Joonas Lahtinen
• [PATCH v4 06/11] mtd: intel-dg: align 64bit read and write   David Laight
• [PATCH v4 06/11] mtd: intel-dg: align 64bit read and write   David Laight
• Buiild error in i915/xe (was: [PATCH next 4/7] minmax.h: Use BUILD_BUG_ON_MSG() for the lo < hi test in clamp())   David Laight
• Buiild error in i915/xe (was: [PATCH next 4/7] minmax.h: Use BUILD_BUG_ON_MSG() for the lo < hi test in clamp())   David Laight
• Buiild error in i915/xe   David Laight
• Buiild error in i915/xe (was: [PATCH next 4/7] minmax.h: Use BUILD_BUG_ON_MSG() for the lo < hi test in clamp())   David Laight
• Buiild error in i915/xe   David Laight
• Buiild error in i915/xe   David Laight
• Buiild error in i915/xe   David Laight
• [PULL] drm-misc-fixes   Maarten Lankhorst
• [PULL] drm-misc-fixes   Maarten Lankhorst
• [PATCH 1/2] drm/modeset: Handle tiled displays in pan_display_atomic.   Maarten Lankhorst
• [PATCH 2/2] drm/client: Handle tiled displays better   Maarten Lankhorst
• [PATCH 3/3] drm/xe: Use i915-display shutdown sequence directly   Maarten Lankhorst
• [PATCH 3/8] drm/i915: Pimp display fault reporting   Maarten Lankhorst
• [PATCH] drm/xe/display: Re-use display vmas when possible   Maarten Lankhorst
• [PULL] drm-misc-next-fixes   Maarten Lankhorst
• [PATCH] drm/i915: Add VM_DONTEXPAND to exported buffers   Jacek Lawrynowicz
• [PATCH] drm/i915: Add VM_DONTEXPAND to exported buffers   Jacek Lawrynowicz
• [PATCH] drm/i915: Add VM_DONTEXPAND to exported buffers   Jacek Lawrynowicz
• [PATCH v2] drm/i915: Add VM_DONTEXPAND to exported buffers   Jacek Lawrynowicz
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Liang, Kan
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Liang, Kan
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Liang, Kan
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Liang, Kan
• [PATCH] treewide: const qualify ctl_tables where applicable   Song Liu
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Wei Liu
• [PATCH] drm/xe/display: Re-use display vmas when possible   Aaron Ma
• [PATCH] drm/xe/display: Re-use display vmas when possible   Manna, Animesh
• [PATCH v3 0/6] LOBF enablement fix   Animesh Manna
• [PATCH v3 1/6] drm/i915/lobf: Add lobf enablement in post plane update   Animesh Manna
• [PATCH v3 2/6] drm/i915/lobf: Add fixed refresh rate check in compute_config()   Animesh Manna
• [PATCH v3 3/6] drm/i915/lobf: Update lobf if any change in dependent parameters   Animesh Manna
• [PATCH v3 4/6] drm/i915/lobf: Add debug interface for lobf   Animesh Manna
• [PATCH v3 5/6] drm/i915/lobf: Check for sink error and disable LOBF   Animesh Manna
• [PATCH v3 6/6] drm/i915/lobf: Add debug print for LOBF   Animesh Manna
• [PATCH v3] drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY   Animesh Manna
• [PATCH v3] drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY   Manna, Animesh
• [PATCH v3 01/10] drm/i915/psr: Use PSR2_MAN_TRK_CTL CFF bit only to send full update   Manna, Animesh
• [PATCH v3 02/10] drm/i915/psr: Rename psr_force_hw_tracking_exit as intel_psr_force_update   Manna, Animesh
• [PATCH v3 03/10] drm/i915/psr: Split setting sff and cff bits away from intel_psr_force_update   Manna, Animesh
• [PATCH v3 05/10] drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards   Manna, Animesh
• [PATCH v3 04/10] drm/i915/psr: Add register definitions for SFF_CTL and CFF_CTL registers   Manna, Animesh
• [PATCH v3 06/10] drm/i915/psr: Allow writing PSR2_MAN_TRK_CTL using DSB   Manna, Animesh
• [PATCH v3 07/10] drm/i915/psr: Changes for PSR2_MAN_TRK_CTL handling when DSB is in use   Manna, Animesh
• [PATCH v3 08/10] drm/i915/psr: Add intel_psr_is_psr_mode_changing   Manna, Animesh
• [PATCH v3 09/10] drm/i915/display: Don't use DSB if psr mode changing   Manna, Animesh
• [PATCH v3 10/10] drm/i915/psr: Allow DSB usage when PSR is enabled   Manna, Animesh
• [PATCH topic/core-for-CI] Revert "vmstat: disable vmstat_work on vmstat_cpu_down_prep()"   Lucas De Marchi
• [PATCH topic/core-for-CI] Revert "vmstat: disable vmstat_work on vmstat_cpu_down_prep()"   Lucas De Marchi
• [PATCH] drm/i915/pmu: Remove i915_pmu_event_event_idx()   Lucas De Marchi
• [PATCH] drm/xe: Add missing SPDX license identifiers   Lucas De Marchi
• [PATCH] drm/xe: Add missing SPDX license identifiers   Lucas De Marchi
• [PATCH] drm/xe/dp: Enable DP tunneling   Lucas De Marchi
• [PATCH] drm/xe/dp: Enable DP tunneling   Lucas De Marchi
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Lucas De Marchi
• [PATCH] drm/xe/dp: Enable DP tunneling   Lucas De Marchi
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Lucas De Marchi
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Lucas De Marchi
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Lucas De Marchi
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Lucas De Marchi
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Lucas De Marchi
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Lucas De Marchi
• [PATCH] drm/i915: Give i915 and xe each their own display tracepoints   Lucas De Marchi
• [PATCH i-g-t v6 1/2] lib/igt_perf: Add utils to extract PMU event info   Lucas De Marchi
• [PATCH i-g-t v6 2/2] tests/xe/pmu: Add pmu tests   Lucas De Marchi
• [PATCH v2] drm/i915/pmu: Drop custom hotplug code   Lucas De Marchi
• [PATCH] drm/i915/dmc_wl: Do not check for DMC payload   Lucas De Marchi
• [Intel-gfx] [PATCH v2 18/19] drm/i915/dsb: Re-instate DSB for LUT updates   Ed Maste
• [PATCH] drm/i915: Add Wa_22010465259 in its respective WA list   Ranu Maurya
• [PATCH v2] drm/i915: Add Wa_22010465259 in its respective WA list   Ranu Maurya
• RE: ✗ i915.CI.BAT: failure for drm/i915: Add Wa_22010465259 in its respective WA list   Maurya, Ranu
• [PATCH v3] drm/i915: Add Wa_22010465259 in its respective WA list   Ranu Maurya
• RE: ✗ i915.CI.Full: failure for drm/i915: Add Wa_22010465259 in its respective WA list (rev3)   Maurya, Ranu
• [PATCH] treewide: const qualify ctl_tables where applicable   Corey Minyard
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Paul Moore
• [PATCH 0/2] vmalloc: Introduce vmap_file()   Andrew Morton
• [PATCHv4] drm/i915/dp: Guarantee a minimum HBlank time   Murthy, Arun R
• [PATCH v5] drm/i915/dp: Guarantee a minimum HBlank time   Arun R Murthy
• [PATCH v6] drm/i915/dp: Guarantee a minimum HBlank time   Arun R Murthy
• [PATCHv3 01/10] drm/crtc: Add histogram properties   Murthy, Arun R
• [PATCH v7] drm/i915/dp: Guarantee a minimum HBlank time   Arun R Murthy
• [PATCH v3 0/5] Expose modifiers/formats supported by async flips   Arun R Murthy
• [PATCH v3 1/5] drm/plane: Add new plane property IN_FORMATS_ASYNC   Arun R Murthy
• [PATCH v3 2/5] drm/plane: Expose function to create format/modifier blob   Arun R Murthy
• [PATCH v3 3/5] drm/plane: Function to check async supported modifier/format   Arun R Murthy
• [PATCH v3 4/5] drm/i915/display: Populate list of async supported formats/modifiers   Arun R Murthy
• [PATCH v3 5/5] drm/i915/display: Add function for format_mod_supported_async   Arun R Murthy
• [PATCH v7 00/14] Display Global Histogram   Arun R Murthy
• [PATCH v7 01/14] drm: Define histogram structures exposed to user   Arun R Murthy
• [PATCH v7 02/14] drm: Define ImageEnhancemenT LUT structures exposed to user   Arun R Murthy
• [PATCH v7 03/14] drm/crtc: Expose API to create drm crtc property for histogram   Arun R Murthy
• [PATCH v7 04/14] drm/crtc: Expose API to create drm crtc property for IET LUT   Arun R Murthy
• [PATCH v7 05/14] drm/i915/histogram: Define registers for histogram   Arun R Murthy
• [PATCH v7 06/14] drm/i915/histogram: Add support for histogram   Arun R Murthy
• [PATCH v7 07/14] drm/xe: Add histogram support to Xe builds   Arun R Murthy
• [PATCH v7 08/14] drm/i915/histogram: histogram interrupt handling   Arun R Murthy
• [PATCH v7 09/14] drm/i915/histogram: Hook i915 histogram with drm histogram   Arun R Murthy
• [PATCH v7 10/14] drm/i915/iet: Add support to writing the IET LUT data   Arun R Murthy
• [PATCH v7 11/14] drm/i915/crtc: Hook i915 IET LUT with the drm IET properties   Arun R Murthy
• [PATCH v7 12/14] drm/i915/histogram: histogram delay counter doesnt reset   Arun R Murthy
• [PATCH v7 13/14] drm/i915/histogram: Histogram changes for Display 20+   Arun R Murthy
• [PATCH v7 14/14] drm/i915/histogram: Enable pipe dithering   Arun R Murthy
• [PATCH v3 2/5] drm/plane: Expose function to create format/modifier blob   Murthy, Arun R
• [PATCH v3 1/5] drm/plane: Add new plane property IN_FORMATS_ASYNC   Murthy, Arun R
• [PATCH v7 01/14] drm: Define histogram structures exposed to user   Murthy, Arun R
• [PATCH v7 02/14] drm: Define ImageEnhancemenT LUT structures exposed to user   Murthy, Arun R
• [PATCH v7 07/14] drm/xe: Add histogram support to Xe builds   Murthy, Arun R
• [PATCH v3 1/5] drm/plane: Add new plane property IN_FORMATS_ASYNC   Murthy, Arun R
• [PATCH v3 2/5] drm/plane: Expose function to create format/modifier blob   Murthy, Arun R
• [PATCH v7 01/14] drm: Define histogram structures exposed to user   Murthy, Arun R
• [PATCH v7 02/14] drm: Define ImageEnhancemenT LUT structures exposed to user   Murthy, Arun R
• [PATCH v7 02/14] drm: Define ImageEnhancemenT LUT structures exposed to user   Murthy, Arun R
• [PATCH v7 01/14] drm: Define histogram structures exposed to user   Murthy, Arun R
• [PATCH v7 01/14] drm: Define histogram structures exposed to user   Murthy, Arun R
• [PATCH v3 4/5] drm/i915/display: Populate list of async supported formats/modifiers   Murthy, Arun R
• [PATCH v8] drm/i915/dp: Guarantee a minimum HBlank time   Arun R Murthy
• [PATCH v7 01/14] drm: Define histogram structures exposed to user   Murthy, Arun R
• [PATCH 1/3] drm/dp: Add the DPCD register required for Extended wake timeout   Murthy, Arun R
• [PATCH 3/3] drm/i915/lttpr: Enable Extended Wake Timeout   Murthy, Arun R
• [PATCH v8] drm/i915/dp: Guarantee a minimum HBlank time   Murthy, Arun R
• [PATCH v9] drm/i915/dp: Guarantee a minimum HBlank time   Arun R Murthy
• [PATCH v3 2/5] drm/plane: Expose function to create format/modifier blob   Murthy, Arun R
• [PATCH v3 2/5] drm/plane: Expose function to create format/modifier blob   Murthy, Arun R
• [PATCH v3 2/5] drm/plane: Expose function to create format/modifier blob   Murthy, Arun R
• [PATCH v8 00/14] Display Global Histogram   Arun R Murthy
• [PATCH v8 01/14] drm: Define histogram structures exposed to user   Arun R Murthy
• [PATCH v8 02/14] drm: Define ImageEnhancemenT LUT structures exposed to user   Arun R Murthy
• [PATCH v8 03/14] drm/crtc: Expose API to create drm crtc property for histogram   Arun R Murthy
• [PATCH v8 04/14] drm/crtc: Expose API to create drm crtc property for IET LUT   Arun R Murthy
• [PATCH v8 05/14] drm/i915/histogram: Define registers for histogram   Arun R Murthy
• [PATCH v8 06/14] drm/i915/histogram: Add support for histogram   Arun R Murthy
• [PATCH v8 07/14] drm/xe: Add histogram support to Xe builds   Arun R Murthy
• [PATCH v8 08/14] drm/i915/histogram: histogram interrupt handling   Arun R Murthy
• [PATCH v8 09/14] drm/i915/histogram: Hook i915 histogram with drm histogram   Arun R Murthy
• [PATCH v8 10/14] drm/i915/iet: Add support to writing the IET LUT data   Arun R Murthy
• [PATCH v8 11/14] drm/i915/crtc: Hook i915 IET LUT with the drm IET properties   Arun R Murthy
• [PATCH v8 12/14] drm/i915/histogram: histogram delay counter doesnt reset   Arun R Murthy
• [PATCH v8 13/14] drm/i915/histogram: Histogram changes for Display 20+   Arun R Murthy
• [PATCH v8 14/14] drm/i915/histogram: Enable pipe dithering   Arun R Murthy
• [PATCH] drm/i915/dp: Return early if dsc is required but not supported   Ankit Nautiyal
• [RESEND 0/2] Add helper for range_bpg_offset and minor fixes   Ankit Nautiyal
• [RESEND 1/2] drm/i915/dsc: Use helper to calculate range_bpg_offset   Ankit Nautiyal
• [RESEND 2/2] drm/i915/dsc: Remove old comment about DSC 444 support   Ankit Nautiyal
• [PATCH] drm/i915/dp: Correct max compressed bpp bounds by using link bpp   Ankit Nautiyal
• [PATCH v2] drm/i915/dp: Correct max compressed bpp bounds by using link bpp   Ankit Nautiyal
• [PATCH 0/5] Add HDMI PLL Algorithm for SNPS/C10PHY   Ankit Nautiyal
• [PATCH 1/5] drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2   Ankit Nautiyal
• [PATCH 2/5] drm/i915/snps_phy: Use HDMI PLL algorithm for DG2   Ankit Nautiyal
• [PATCH 3/5] drm/i915/cx0_phy_regs: Add C10 registers bits   Ankit Nautiyal
• [PATCH 4/5] drm/i915/intel_snps_hdmi_pll: Compute C10 HDMI PLLs with algorithm   Ankit Nautiyal
• [PATCH 5/5] drm/i915/cx0_phy: Use HDMI PLL algorithm for C10 PHY   Ankit Nautiyal
• [PATCH 3/5] drm/i915/cx0_phy_regs: Add C10 registers bits   Ankit Nautiyal
• [PATCH 00/35] Use VRR timing generator for fixed refresh rate modes   Ankit Nautiyal
• [PATCH 01/35] drm/i915/vrr: Add crtc_state dump for vrr.vsync params   Ankit Nautiyal
• [PATCH 02/35] drm/i915/vrr: Compute vrr.vsync_{start, end} during full modeset   Ankit Nautiyal
• [PATCH 03/35] drm/i915/dp: fix the Adaptive sync Operation mode for SDP   Ankit Nautiyal
• [PATCH 04/35] drm/i915/dp: Compute as_sdp.vtotal based on vrr timings   Ankit Nautiyal
• [PATCH 05/35] drm/i915/dp: Compute as_sdp based on if vrr possible   Ankit Nautiyal
• [PATCH 06/35] drm/i915/display: Move as sdp params change to fastset   Ankit Nautiyal
• [PATCH 07/35] drm/i915/vrr: Remove unwanted comment   Ankit Nautiyal
• [PATCH 08/35] drm/i915:vrr: Refactor VRR timing setup into a separate function   Ankit Nautiyal
• [PATCH 09/35] drm/i915:vrr: Separate out functions to compute vmin and vmax   Ankit Nautiyal
• [PATCH 10/35] drm/i915/vrr: Make helpers for cmrr and vrr timings   Ankit Nautiyal
• [PATCH 11/35] drm/i915/vrr: Avoid prepare vrr timings for cmrr   Ankit Nautiyal
• [PATCH 12/35] drm/i915/vrr: Simplify CMRR Enable Check in intel_vrr_get_config   Ankit Nautiyal
• [PATCH 13/35] drm/i915/vrr: Introduce new field for VRR mode   Ankit Nautiyal
• [PATCH 14/35] drm/i915/vrr: Fill VRR timing generator mode for CMRR and VRR   Ankit Nautiyal
• [PATCH 15/35] drm/i915/display: Remove vrr.enable and instead check vrr.mode != NONE   Ankit Nautiyal
• [PATCH 16/35] drm/i915/display: Absorb cmrr attributes into vrr struct   Ankit Nautiyal
• [PATCH 17/35] drm/i915/display: Add vrr mode to crtc_state dump   Ankit Nautiyal
• [PATCH 18/35] drm/i915/dp: Avoid vrr compute config for HDMI sink   Ankit Nautiyal
• [PATCH 19/35] drm/i915/vrr: Introduce VRR mode Fixed RR   Ankit Nautiyal
• [PATCH 20/35] drm/i915/vrr: Avoid sending PUSH when VRR TG is used with Fixed refresh rate   Ankit Nautiyal
• [PATCH 21/35] drm/i915/display: Enable MSA Ignore Timing PAR only when in not fixed_rr mode   Ankit Nautiyal
• [PATCH 22/35] drm/i915/vrr: Disable CMRR   Ankit Nautiyal
• [PATCH 23/35] drm/i915/vrr: Use crtc_vtotal for vmin   Ankit Nautiyal
• [PATCH 24/35] drm/i915/vrr: Adjust Vtotal for MSA for fixed timings   Ankit Nautiyal
• [PATCH 25/35] drm/i915/vrr: Prepare for fixed refresh rate timings   Ankit Nautiyal
• [PATCH 26/35] drm/i915/hdmi: Use VRR Timing generator for HDMI   Ankit Nautiyal
• [PATCH 27/35] drm/i915/display: Disable PSR before disabling VRR   Ankit Nautiyal
• [PATCH 28/35] drm/i915/psr: Allow PSR for fixed refrsh rate with VRR TG   Ankit Nautiyal
• [PATCH 29/35] drm/i915/display: Extend WA 14015406119 for PSR2   Ankit Nautiyal
• [PATCH 30/35] drm/i915/vrr: Handle joiner with vrr   Ankit Nautiyal
• [PATCH 31/35] drm/i915/vrr: Always set vrr vmax/vmin/flipline in vrr_{enable/disable}   Ankit Nautiyal
• [PATCH 32/35] drm/i915/vrr: Prepare for Fixed refresh rate mode from MTL+   Ankit Nautiyal
• [PATCH 33/35] drm/i915/vrr: Refactor condition for computing vmax and LRR   Ankit Nautiyal
• [PATCH 34/35] drm/i915/vrr: Always use VRR timing generator for MTL+   Ankit Nautiyal
• [PATCH 35/35] drm/i915/display: Use VRR timings for MTL+ in modeset sequence   Ankit Nautiyal
• [PATCH] drm/i915/dp: Return min bpc supported by source instead of 0   Ankit Nautiyal
• [PATCH 01/18] drm/i915: Extract intel_crtc_vblank_delay()   Nautiyal, Ankit K
• [PATCH 02/18] drm/i915: Check vblank delay validity   Nautiyal, Ankit K
• [PATCH 03/18] drm/i915: Fix include order   Nautiyal, Ankit K
• [PATCH 04/18] drm/i915: Introduce intel_vrr_{vmin,vmax}_vtotal()   Nautiyal, Ankit K
• [PATCH 05/18] drm/i915: Move framestart/etc. state dump to a better spot   Nautiyal, Ankit K
• [PATCH 06/18] drm/i915: Include the vblank delay in the state dump   Nautiyal, Ankit K
• [PATCH 07/18] drm/i915/vrr: Improve VRR state dump   Nautiyal, Ankit K
• [PATCH 08/18] drm/i915: Include the scanline offset in the state dump   Nautiyal, Ankit K
• [PATCH 09/18] drm/i915: Extract intel_mode_vblank_delay()   Nautiyal, Ankit K
• [PATCH 10/18] drm/i915: Consolidate intel_pre_commit_crtc_state()   Nautiyal, Ankit K
• [PATCH 11/18] drm/i915: Extract intel_crtc_active_timings()   Nautiyal, Ankit K
• [PATCH 12/18] drm/i915/vrr: Introduce intel_vrr_vblank_delay()   Nautiyal, Ankit K
• [PATCH 13/18] drm/i915/vrr: Drop the extra vmin adjustment for ADL+   Nautiyal, Ankit K
• [PATCH 14/18] drm/i915/vrr: Fix vmin/vmax/flipline on TGL when using vblank delay   Nautiyal, Ankit K
• [PATCH 15/18] drm/i915/vrr: Add extra vblank delay to estimates   Nautiyal, Ankit K
• [PATCH 16/18] drm/i915/vrr: Plumb the DSB into intel_vrr_send_push()   Nautiyal, Ankit K
• [PATCH 17/18] drm/i915/dsb: Add support for triggering VRR push with DSB   Nautiyal, Ankit K
• [PATCH 18/18] drm/i915/dsb: Allow DSB to perform commits when VRR is enabled   Nautiyal, Ankit K
• [PATCH] drm/i915/dp: Return early if dsc is required but not supported   Nautiyal, Ankit K
• [PATCH v3 1/5] drm/i915/scaler: Add and compute scaling factors   Nautiyal, Ankit K
• [PATCH v3 2/5] drm/i915/scaler: Use crtc_state to setup plane or pipe scaler   Nautiyal, Ankit K
• [PATCH v3 3/5] drm/i915/scaler: Compute scaling factors for pipe scaler   Nautiyal, Ankit K
• [PATCH v3 4/5] drm/i915/scaler: Check if vblank is sufficient for scaler   Nautiyal, Ankit K
• [PATCH v3 5/5] drm/i915/dsc: Check if dsc prefill sufficient for vblank   Nautiyal, Ankit K
• [PATCH 01/18] drm/i915: Extract intel_crtc_vblank_delay()   Nautiyal, Ankit K
• [PATCH v4 1/7] drm/i915/scaler: Add and compute scaling factors   Nautiyal, Ankit K
• [PATCH v4 3/7] drm/i915/scaler: Refactor max_scale computation   Nautiyal, Ankit K
• [PATCH v4 6/7] drm/i915/scaler: Check if vblank is sufficient for scaler   Nautiyal, Ankit K
• [PATCH v4 7/7] drm/i915/dsc: Check if vblank is sufficient for dsc prefill   Nautiyal, Ankit K
• [PATCH v4 7/7] drm/i915/dsc: Check if vblank is sufficient for dsc prefill   Nautiyal, Ankit K
• drm/i915/display: HDMI C10 PLL entry for 265250 MHz   Nautiyal, Ankit K
• [PATCH v5 3/7] drm/i915/scaler: Refactor max_scale computation   Nautiyal, Ankit K
• [PATCH v5 4/7] drm/i915/scaler: Compute scaling factors for pipe scaler   Nautiyal, Ankit K
• [PATCH v5 5/7] drm/i915/scaler: Limit pipe scaler downscaling factors for YUV420   Nautiyal, Ankit K
• [PATCH v5 6/7] drm/i915/scaler: Check if vblank is sufficient for scaler   Nautiyal, Ankit K
• [PATCH v5 7/7] drm/i915/dsc: Check if vblank is sufficient for dsc prefill   Nautiyal, Ankit K
• [PATCH] drm/i915/hdcp: Fix Repeater authentication during topology change   Nautiyal, Ankit K
• [PATCH] drm/i915/dp: Correct max compressed bpp bounds by using link bpp   Nautiyal, Ankit K
• [PATCH v6 6/7] drm/i915/scaler: Check if vblank is sufficient for scaler   Nautiyal, Ankit K
• [PATCH v6 7/7] drm/i915/dsc: Check if vblank is sufficient for dsc prefill   Nautiyal, Ankit K
• [RESEND 0/2] Add helper for range_bpg_offset and minor fixes   Nautiyal, Ankit K
• [PATCH v7 6/7] drm/i915/scaler: Check if vblank is sufficient for scaler   Nautiyal, Ankit K
• [PATCH v7 7/7] drm/i915/dsc: Check if vblank is sufficient for dsc prefill   Nautiyal, Ankit K
• [PATCH 1/5] drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2   Nautiyal, Ankit K
• [PATCH v8 6/7] drm/i915/scaler: Check if vblank is sufficient for scaler   Nautiyal, Ankit K
• [PATCH v8 7/7] drm/i915/dsc: Check if vblank is sufficient for dsc prefill   Nautiyal, Ankit K
• [PATCH 0/5] Add HDMI PLL Algorithm for SNPS/C10PHY   Nautiyal, Ankit K
• [PATCH 00/23] Use VRR timing generator for fixed refresh rate modes   Nautiyal, Ankit K
• [PATCH 00/23] Use VRR timing generator for fixed refresh rate modes   Nautiyal, Ankit K
• Re: ✗ i915.CI.BAT: failure for Add HDMI PLL Algorithm for SNPS/C10PHY (rev5)   Nautiyal, Ankit K
• [PATCH 0/5] Add HDMI PLL Algorithm for SNPS/C10PHY   Nautiyal, Ankit K
• [PATCH v9 0/7] Check Scaler and DSC Prefill Latency Against Vblank   Nautiyal, Ankit K
• [PATCH] drm/i915/cx0: Set ssc_enabled for c20 too   Nautiyal, Ankit K
• [PATCH v6 5/6] drm/i915/dp: Compute as_sdp based on if vrr possible   Nautiyal, Ankit K
• [PATCH v6 6/6] drm/i915/display: Move as sdp params change to fastset   Nautiyal, Ankit K
• [PATCH 04/35] drm/i915/dp: Compute as_sdp.vtotal based on vrr timings   Nautiyal, Ankit K
• [PATCH 11/35] drm/i915/vrr: Avoid prepare vrr timings for cmrr   Nautiyal, Ankit K
• [PATCH 20/35] drm/i915/vrr: Avoid sending PUSH when VRR TG is used with Fixed refresh rate   Nautiyal, Ankit K
• [PATCH 21/35] drm/i915/display: Enable MSA Ignore Timing PAR only when in not fixed_rr mode   Nautiyal, Ankit K
• [PATCH 24/35] drm/i915/vrr: Adjust Vtotal for MSA for fixed timings   Nautiyal, Ankit K
• [PATCH 31/35] drm/i915/vrr: Always set vrr vmax/vmin/flipline in vrr_{enable/disable}   Nautiyal, Ankit K
• [PATCH v6 0/6] Add AS_SDP to fastset   Nautiyal, Ankit K
• [PATCH 01/14] drm/i915/dp: Iterate DSC BPP from high to low on all platforms   Nautiyal, Ankit K
• [PATCH v3 1/8] drm/i915/gt: fix typos in i915/gt files.   Krzysztof Niemiec
• [PATCH v3 2/8] drm/i915/gvt: fix typos in i915/gvt files   Krzysztof Niemiec
• [PATCH v3 3/8] drm/i915/gem: fix typos in i915/gem files   Krzysztof Niemiec
• [PATCH v3 4/8] drm/i915/pxp: fix typos in i915/pxp files   Krzysztof Niemiec
• [PATCH v3 5/8] drm/i915/selftests: fix typos in i915/selftests files   Krzysztof Niemiec
• [PATCH v3 6/8] drm/i915/soc: fix typos in i915/soc files   Krzysztof Niemiec
• [PATCH v3 7/8] drm/i915/display: fix typos in i915/display files   Krzysztof Niemiec
• [PATCH v3 8/8] drm/i915: fix typos in drm/i915 files   Krzysztof Niemiec
• [PATCH v4 1/8] drm/i915/gt: fix typos in i915/gt files.   Krzysztof Niemiec
• [PATCH v4 2/8] drm/i915/gvt: fix typos in i915/gvt files   Krzysztof Niemiec
• [PATCH v4 3/8] drm/i915/gem: fix typos in i915/gem files   Krzysztof Niemiec
• [PATCH v4 4/8] drm/i915/pxp: fix typos in i915/pxp files   Krzysztof Niemiec
• [PATCH v4 5/8] drm/i915/selftests: fix typos in i915/selftests files   Krzysztof Niemiec
• [PATCH v4 6/8] drm/i915/soc: fix typos in i915/soc files   Krzysztof Niemiec
• [PATCH v4 7/8] drm/i915/display: fix typos in i915/display files   Krzysztof Niemiec
• [PATCH v4 8/8] drm/i915: fix typos in drm/i915 files   Krzysztof Niemiec
• [PATCH] Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset"   Krzysztof Niemiec
• [PATCH v2] Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset"   Krzysztof Niemiec
• [PATCH v2 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers   Jani Nikula
• [PATCH] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()   Jani Nikula
• [PATCH v2 06/16] drm/i915/mst: split out a helper for figuring out the TU   Jani Nikula
• [PATCH v2 07/16] drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST   Jani Nikula
• [PATCH v2 10/16] drm/i915/ddi: write payload for 128b/132b SST   Jani Nikula
• ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev7)   Jani Nikula
• [PATCH] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()   Jani Nikula
• [PATCH v5] drm/i915/dp: Guarantee a minimum HBlank time   Jani Nikula
• [PATCH] drm/i915/dp: Return early if dsc is required but not supported   Jani Nikula
• [PATCH 1/2] drm/i915/dp: Use intel_display instead of drm_i915_private   Jani Nikula
• [PATCH 2/2] drm/i915/ddi: Optimize mtl_port_buf_ctl_program   Jani Nikula
• [PATCH v3] drm/i915/cmtg: Disable the CMTG   Jani Nikula
• [PATCH v2 13/16] drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout   Jani Nikula
• [PATCH v2 16/16] drm/i915/dp: compute config for 128b/132b SST w/o DSC   Jani Nikula
• [PATCH v3 00/16] drm/i915/dp: 128b/132b uncompressed SST   Jani Nikula
• [PATCH v3 01/16] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()   Jani Nikula
• [PATCH v3 02/16] drm/i915/mst: drop connector parameter from intel_dp_mst_bw_overhead()   Jani Nikula
• [PATCH v3 03/16] drm/i915/mst: drop connector parameter from intel_dp_mst_compute_m_n()   Jani Nikula
• [PATCH v3 04/16] drm/i915/mst: change return value of mst_stream_find_vcpi_slots_for_bpp()   Jani Nikula
• [PATCH v3 05/16] drm/i915/mst: remove crtc_state->pbn   Jani Nikula
• [PATCH v3 06/16] drm/i915/mst: split out a helper for figuring out the TU   Jani Nikula
• [PATCH v3 07/16] drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST   Jani Nikula
• [PATCH v3 08/16] drm/i915/ddi: enable 128b/132b TRANS_DDI_FUNC_CTL mode for UHBR SST   Jani Nikula
• [PATCH v3 09/16] drm/i915/ddi: 128b/132b SST also needs DP_TP_CTL_MODE_MST   Jani Nikula
• [PATCH v3 10/16] drm/i915/ddi: write payload for 128b/132b SST   Jani Nikula
• [PATCH v3 11/16] drm/i915/ddi: initialize 128b/132b SST DP2 VFREQ registers   Jani Nikula
• [PATCH v3 12/16] drm/i915/ddi: enable ACT handling for 128b/132b SST   Jani Nikula
• [PATCH v3 13/16] drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout   Jani Nikula
• [PATCH v3 14/16] drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()   Jani Nikula
• [PATCH v3 15/16] drm/i915/ddi: disable trancoder port select for 128b/132b SST   Jani Nikula
• [PATCH v3 16/16] drm/i915/dp: compute config for 128b/132b SST w/o DSC   Jani Nikula
• [BUG] The bottom and right edges on the tty are not shown on Apple T2 MacBooks with Retina display   Jani Nikula
• [PATCH 2/3] drm/i915/display: Wrap IRQ-specific uncore functions   Jani Nikula
• [PATCH] drm/i915/ddi: write payload for 128b/132b SST   Jani Nikula
• [PATCH v3 01/16] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()   Jani Nikula
• [BUG] The bottom and right edges on the tty are not shown on Apple T2 MacBooks with Retina display   Jani Nikula
• [PATCH v1 7/8] drm/i915/display: fix typos in i915/display files   Jani Nikula
• [PATCH v3 01/16] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()   Jani Nikula
• [PATCH v3 00/16] drm/i915/dp: 128b/132b uncompressed SST   Jani Nikula
• [PATCH 1/4] drm/i915/pmdemand: convert to_intel_pmdemand_state() to a function   Jani Nikula
• [CI] drm/i915/gvt: store virtual_dp_monitor_edid in rodata   Jani Nikula
• [PATCH 0/6] drm/i915: display reset cleanups   Jani Nikula
• [PATCH 1/6] drm/i915/display: convert display reset to struct intel_display *   Jani Nikula
• [PATCH 2/6] drm/i915: move pending_fb_pin to struct intel_display   Jani Nikula
• [PATCH 3/6] drm/i915: add intel_gt_gpu_reset_clobbers_display() helper   Jani Nikula
• [PATCH 4/6] drm/i915/display: add intel_display_gpu_reset_clobbers_display() helper   Jani Nikula
• [PATCH 5/6] drm/i915: move gpu_reset_clobbers_display flag to display info   Jani Nikula
• [PATCH 6/6] drm/i915/display: convert intel_ddi_buf_trans.c to struct intel_display   Jani Nikula
• [PATCH] drm/i915/psr: clarify intel_psr_pre_plane_update() conditions   Jani Nikula
• [PATCH v3 4/6] drm/i915/lobf: Add debug interface for lobf   Jani Nikula
• [PATCH 0/3] drm/i915/audio: convert to struct intel_display   Jani Nikula
• [PATCH 1/3] drm/i915/audio: convert to struct intel_display   Jani Nikula
• [PATCH 2/3] drm/i915/audio: convert LPE audio to struct intel_display   Jani Nikula
• [PATCH 3/3] drm/i915/audio: rename function prefixes from i915 to intel   Jani Nikula
• [PATCH v4 0/2] drm/i915/cmtg: Disable the CMTG   Jani Nikula
• [PATCH] drm/i915/bios: Define eDP pipe joiner feature for VBT   Jani Nikula
• [PATCH 3/5] drm/i915/dp_mst: Simplify using to_intel_display() passing it an intel_connector pointer   Jani Nikula
• [PATCH 4/5] drm/i915/dp_mst: Simplify getting a drm_device pointer needed by to_i915()   Jani Nikula
• [PATCH 5/5] drm/i915/dp_mst: Use intel_display::platform.alderlake_p instead of IS_ALDERLAKE_P()   Jani Nikula
• [PATCH] drm/i915/bios: Define eDP pipe joiner feature for VBT   Jani Nikula
• [PATCH] drm/xe: remove unused xe_pciids.h harder, add missing PCI ID   Jani Nikula
• [PATCH v2 2/3] drm: renesas: rcar-du: annotate rcar_cmm_read() with __maybe_unused   Jani Nikula
• [PATCH] drm/xe: remove unused xe_pciids.h harder, add missing PCI ID   Jani Nikula
• [PATCH] treewide: const qualify ctl_tables where applicable   Jani Nikula
• [PATCH v3 01/16] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()   Jani Nikula
• [PATCH] drm/xe: remove unused xe_pciids.h harder, add missing PCI ID   Jani Nikula
• GVT-g status (was: Re: [PATCH 0/3] drm/i915/gvt: Deadcoding)   Jani Nikula
• [PATCH] drm/xe/dp: Enable DP tunneling   Jani Nikula
• [PATCH v2 2/3] drm/i915/display: Wrap IRQ-specific uncore functions   Jani Nikula
• [PATCH v2 2/3] drm/i915/display: Wrap IRQ-specific uncore functions   Jani Nikula
• [PATCH v5] drm/i915/cmtg: Disable the CMTG   Jani Nikula
• [PATCH] drm/i915/display: Add skip link check quirk   Jani Nikula
• [PATCH] drm/i915/hdcp: Use correct function to check if encoder is HDMI   Jani Nikula
• [PATCH] drm/i915/hdcp: Use correct function to check if encoder is HDMI   Jani Nikula
• [PATCH] drm/i915/dp: Correct max compressed bpp bounds by using link bpp   Jani Nikula
• [PATCH] drm/i915/gt: Handle INTEL_WAKEREF_DEF return value in gen8_ggtt_bind_get_ce   Jani Nikula
• [PATCH] drm/i915: Handle null 'fb' in 'intel_plane_atomic_check_with_state'   Jani Nikula
• Buiild error in i915/xe   Jani Nikula
• [PATCH] drm/i915/hdcp: Use correct function to check if encoder is HDMI   Jani Nikula
• Buiild error in i915/xe   Jani Nikula
• [PATCH 1/8] drm/i915: Keep TRANS_VBLANK.vblank_start==0 on ADL+ even when doing LRR updates   Jani Nikula
• [PATCH 2/8] drm/i915: Handle interlaced modes in intel_set_transcoder_timings_lrr()   Jani Nikula
• [PATCH 3/8] drm/i915: Update TRANS_SET_CONTEXT_LATENCY during LRR updates   Jani Nikula
• [PATCH 4/8] drm/i915: Warn if someone tries to use intel_set_transcoder_timings*() on DSI outputs   Jani Nikula
• [PATCH 5/8] drm/i915: Extract lrr_params_changed()   Jani Nikula
• [PATCH 6/8] drm/i915: Allow fastboot to fix up the vblank delay   Jani Nikula
• [PATCH] drm/i915/backlight: Return immediately when scale() finds invalid parameters   Jani Nikula
• [PATCH] drm/i915/fbdev: Discard large BIOS framebuffers   Jani Nikula
• [PATCH v8] drm/i915/dp: Guarantee a minimum HBlank time   Jani Nikula
• [PATCH v4 4/6] drm/i915/xe3: add dirty rect support for FBC   Jani Nikula
• [PATCH v4 6/6] drm/i915/xe3: introduce a dirty rectangle state variable   Jani Nikula
• [PATCH v4 5/6] drm/i915/xe3: handle dirty rect update within the scope of DSB   Jani Nikula
• [PATCH 3/5] drm/i915/cx0_phy_regs: Add C10 registers bits   Jani Nikula
• [PATCH] drm/i915/gt: Handle INTEL_WAKEREF_DEF return value in gen8_ggtt_bind_get_ce   Jani Nikula
• [PATCH 0/2] drm: add header tests   Jani Nikula
• [PATCH 1/2] drm/client: include types.h to make drm_client_event.h self-contained   Jani Nikula
• [PATCH 2/2] drm: ensure drm headers are self-contained and pass kernel-doc   Jani Nikula
• [PATCH 0/5] Add HDMI PLL Algorithm for SNPS/C10PHY   Jani Nikula
• linux-next: manual merge of the drm-intel tree with the mm tree   Jani Nikula
• [PATCH 3/3] drm/i915/lttpr: Enable Extended Wake Timeout   Jani Nikula
• [PATCH v4 5/6] drm/i915/xe3: handle dirty rect update within the scope of DSB   Jani Nikula
• [PATCH 0/5] drm: strict type checking for drm_device based logging helpers   Jani Nikula
• [PATCH 1/5] drm/mipi-dsi: stop passing non struct drm_device to drm_err() and friends   Jani Nikula
• [PATCH 2/5] drm/rockchip: stop passing non struct drm_device to drm_err() and friends   Jani Nikula
• [PATCH 3/5] drm/sched: stop passing non struct drm_device to drm_err() and friends   Jani Nikula
• [PATCH 4/5] drm/print: Include drm_device.h   Jani Nikula
• [PATCH 5/5] drm/print: require struct drm_device for drm_err() and friends   Jani Nikula
• [PATCH 4/5] drm/print: Include drm_device.h   Jani Nikula
• [PATCH 2/5] drm/rockchip: stop passing non struct drm_device to drm_err() and friends   Jani Nikula
• [PATCH 3/5] drm/sched: stop passing non struct drm_device to drm_err() and friends   Jani Nikula
• [PATCH 4/5] drm/print: Include drm_device.h   Jani Nikula
• [PATCH 2/4] drm/i915/dmc_wl: Add debugfs for untracked offsets   Jani Nikula
• [PATCH 1/5] drm/i915: Move VT-d alignment into plane->min_alignment()   Jani Nikula
• [PATCH 2/4] drm/i915/dmc_wl: Add debugfs for untracked offsets   Jani Nikula
• [PATCH 4/4] drm/i915/dmc_wl: Enable the debugfs only with enable_dmc_wl_debugfs=1   Jani Nikula
• [PATCH 4/4] drm/i915/dmc_wl: Enable the debugfs only with enable_dmc_wl_debugfs=1   Jani Nikula
• [PATCH 4/4] drm/i915/dmc_wl: Enable the debugfs only with enable_dmc_wl_debugfs=1   Jani Nikula
• [PATCH 4/4] drm/i915/dmc_wl: Enable the debugfs only with enable_dmc_wl_debugfs=1   Jani Nikula
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Jani Nikula
• [PATCH 1/5] drm/i915: Move VT-d alignment into plane->min_alignment()   Jani Nikula
• [PATCH] drm/i915: Give i915 and xe each their own display tracepoints   Jani Nikula
• [PATCH 1/2] drm/i915/display: Drop crtc_state from C10/C20 pll programming   Jani Nikula
• [PATCH 2/2] drm/i915/display: Allow display PHYs to reset power state   Jani Nikula
• [PATCH 0/6] drm/i915: DP and DP MST cleanups   Jani Nikula
• [PATCH 1/6] drm/i915/dp: constify struct link_config_limits pointers   Jani Nikula
• [PATCH 2/6] drm/i915/dp: change the order of intel_dp_mtp_tu_compute_config() params   Jani Nikula
• [PATCH 3/6] drm/i915/mst: change where lane_count and port_clock are set   Jani Nikula
• [PATCH 4/6] drm/i915/mst: handle mst pbn_div in intel_dp_mtp_tu_compute_config()   Jani Nikula
• [PATCH 5/6] drm/i915/mst: remove unnecessary mst_stream_find_vcpi_slots_for_bpp()   Jani Nikula
• [PATCH 6/6] drm/i915/mst: use min_array() and max_array() instead of hand-rolling   Jani Nikula
• ✗ Fi.CI.BUILD: failure for Regression on linux-next (next-20250120) (rev2)   Jani Nikula
• [PATCH 01/17] drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro   Jani Nikula
• [PATCH 02/17] drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL   Jani Nikula
• [PATCH 03/17] drm/i915/ddi: Make all the PORT_WIDTH macros work the same way   Jani Nikula
• [PATCH 05/17] drm/i915/ddi: Simplify the port enabling via DDI_BUF_CTL   Jani Nikula
• [PATCH 4/6] drm/i915/mst: handle mst pbn_div in intel_dp_mtp_tu_compute_config()   Jani Nikula
• [PATCH 6/6] drm/i915/mst: use min_array() and max_array() instead of hand-rolling   Jani Nikula
• [PATCH 00/14] drm/i915/dp: dsc fix, refactoring and cleanups   Jani Nikula
• [PATCH 01/14] drm/i915/dp: Iterate DSC BPP from high to low on all platforms   Jani Nikula
• [PATCH 02/14] drm/i915/dp: Add intel_dp_dsc_bpp_step_x16() helper to get DSC BPP precision   Jani Nikula
• [PATCH 03/14] drm/i915/dp: Rename some variables in xelpd_dsc_compute_link_config()   Jani Nikula
• [PATCH 04/14] drm/i915/dp: Pass .4 BPP values to {icl, xelpd}_dsc_compute_link_config()   Jani Nikula
• [PATCH 05/14] drm/i915/dp: Move max DSC BPP reduction one level higher   Jani Nikula
• [PATCH 06/14] drm/i915/dp: Change icl_dsc_compute_link_config() DSC BPP iteration   Jani Nikula
• [PATCH 07/14] drm/i915/dp: Move force_dsc_fractional_bpp_en check to intel_dp_dsc_valid_bpp()   Jani Nikula
• [PATCH 08/14] drm/i915/dp: Unify DSC link config functions   Jani Nikula
• [PATCH 09/14] drm/i915/dp: Inline do_dsc_compute_compressed_bpp()   Jani Nikula
• [PATCH 10/14] drm/i915/dp: Simplify input BPP checks in intel_dp_dsc_compute_pipe_bpp()   Jani Nikula
• [PATCH 11/14] drm/i915/dp: Use int for compressed BPP in dsc_compute_link_config()   Jani Nikula
• [PATCH 12/14] drm/i915/dp: Drop compute_pipe_bpp parameter from intel_dp_dsc_compute_config()   Jani Nikula
• [PATCH 13/14] drm/i915/dp: Pass connector state all the way to dsc_compute_link_config()   Jani Nikula
• [PATCH 14/14] drm/i915/mst: Convert intel_dp_mtp_tu_compute_config() to .4 format   Jani Nikula
• [PATCH 02/14] drm/i915/dp: Add intel_dp_dsc_bpp_step_x16() helper to get DSC BPP precision   Jani Nikula
• [PATCH v2] drm/i915/dp: Add intel_dp_dsc_bpp_step_x16() helper to get DSC BPP precision   Jani Nikula
• [PATCH v2] drm/i915/selftests: Correct frequency handling in RPS power measurement   Nilawar, Badal
• [PATCH v2] drm/i915/selftests: Correct frequency handling in RPS power measurement   Nilawar, Badal
• [PATCH 0/2] Disable RPG during live selftest   Badal Nilawar
• [PATCH 1/2] drm/i915/mtl: Disable render power-gating during selftest only   Badal Nilawar
• [PATCH 2/2] drm/i915: Disable rpg for Gen 12 and above   Badal Nilawar
• [PATCH 1/2] drm/i915/selftests: Correct frequency handling in RPS power measurement   Nilawar, Badal
• [PATCH 2/2] drm/i915/guc/slpc: Add helper function slpc_measure_power   Nilawar, Badal
• [PATCH v2] drm/i915: Disable RPG during live selftest   Badal Nilawar
• [PATCH v3] drm/i915: Disable RPG during live selftest   Badal Nilawar
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Bill O'Donnell
• [PATCH v10 2/4] drm/doc: Document device wedged event   Pekka Paalanen
• [PATCH v10 2/4] drm/doc: Document device wedged event   Pekka Paalanen
• ✗ Fi.CI.CHECKPATCH: warning for mtd: add driver for Intel discrete graphics (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for mtd: add driver for Intel discrete graphics (rev4)   Patchwork
• ✗ i915.CI.BAT: failure for mtd: add driver for Intel discrete graphics (rev4)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for PSR DSB support (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for PSR DSB support (rev2)   Patchwork
• ✓ i915.CI.BAT: success for PSR DSB support (rev2)   Patchwork
• ✓ i915.CI.Full: success for PSR DSB support (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: 128b/132b uncompressed SST (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: 128b/132b uncompressed SST (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dp: 128b/132b uncompressed SST (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/selftest: Change throttle criteria for rps   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev7)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/dp: 128b/132b uncompressed SST (rev3)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/selftest: Change throttle criteria for rps   Patchwork
• ✓ i915.CI.Full: success for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev7)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dp: Return early if dsc is required but not supported   Patchwork
• ✗ i915.CI.BAT: failure for Clean and Optimise mtl_ddi_prepare_link_retrain   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: Guarantee a minimum HBlank time (rev5)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dp: Guarantee a minimum HBlank time (rev5)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: Guarantee a minimum HBlank time (rev6)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dp: Guarantee a minimum HBlank time (rev6)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dp: Guarantee a minimum HBlank time (rev6)   Patchwork
• ✗ i915.CI.BAT: failure for Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dp: Guarantee a minimum HBlank time (rev6)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: 128b/132b uncompressed SST (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: 128b/132b uncompressed SST (rev4)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dp: 128b/132b uncompressed SST (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dmc_wl: Track pipe interrupt registers   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dmc_wl: Track pipe interrupt registers   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dp: 128b/132b uncompressed SST (rev4)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/dmc_wl: Track pipe interrupt registers   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cmtg: Disable the CMTG (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/cmtg: Disable the CMTG (rev4)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/cmtg: Disable the CMTG (rev4)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/cmtg: Disable the CMTG (rev4)   Patchwork
• ✗ i915.CI.BAT: failure for SSC enablement in port clock programming   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dp: Return early if dsc is required but not supported   Patchwork
• ✗ Fi.CI.SPARSE: warning for LOBF enablement fix (rev3)   Patchwork
• ✓ i915.CI.BAT: success for Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for LOBF enablement fix (rev3)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dp: Return early if dsc is required but not supported   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: Guarantee a minimum HBlank time (rev7)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dp: Guarantee a minimum HBlank time (rev7)   Patchwork
• ✓ i915.CI.Full: success for Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" (rev2)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option (rev2)   Patchwork
• ✓ i915.CI.BAT: success for Clean and Optimise mtl_ddi_prepare_link_retrain   Patchwork
• ✓ i915.CI.Full: success for drm/i915/dp: Return early if dsc is required but not supported   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Fix all typos in i915   Patchwork
• ✓ i915.CI.BAT: success for Fix all typos in i915   Patchwork
• ✗ i915.CI.Full: failure for Clean and Optimise mtl_ddi_prepare_link_retrain   Patchwork
• ✓ i915.CI.Full: success for drm/i915/display: Adjust Added Wake Time with PKG_C_LATENCY (rev3)   Patchwork
• ✓ i915.CI.Full: success for Fix all typos in i915   Patchwork
• ✗ Fi.CI.SPARSE: warning for Check Scaler and DSC Prefill Latency Against Vblank   Patchwork
• ✓ i915.CI.BAT: success for Check Scaler and DSC Prefill Latency Against Vblank   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Revert "vmstat: disable vmstat_work on vmstat_cpu_down_prep()"   Patchwork
• ✓ i915.CI.BAT: success for Revert "vmstat: disable vmstat_work on vmstat_cpu_down_prep()"   Patchwork
• ✓ i915.CI.Full: success for Check Scaler and DSC Prefill Latency Against Vblank   Patchwork
• ✗ i915.CI.Full: failure for Revert "vmstat: disable vmstat_work on vmstat_cpu_down_prep()"   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: 128b/132b uncompressed SST (rev5)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: 128b/132b uncompressed SST (rev5)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dp: 128b/132b uncompressed SST (rev5)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/dp: Rework LTTPR transparent mode handling and add support to msm driver   Patchwork
• ✓ i915.CI.BAT: success for drm/dp: Rework LTTPR transparent mode handling and add support to msm driver   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Remove unused intel_huc_suspend   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Remove unused intel_huc_suspend   Patchwork
• ✗ i915.CI.Full: failure for drm/dp: Rework LTTPR transparent mode handling and add support to msm driver   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gvt: Deadcoding   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Remove unused intel_huc_suspend   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Remove deadcode   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Remove deadcode   Patchwork
• ✓ i915.CI.BAT: success for x86/platform/iosf_mbi: Remove unused iosf_mbi_unregister_pmic_bus_access_notifier   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/gvt: store virtual_dp_monitor_edid in rodata (rev5)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/gt: Prevent uninitialized pointer reads (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Remove deadcode   Patchwork
• ✗ i915.CI.Full: failure for x86/platform/iosf_mbi: Remove unused iosf_mbi_unregister_pmic_bus_access_notifier   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/selftests: Correct frequency handling in RPS power measurement   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/gvt: store virtual_dp_monitor_edid in rodata (rev5)   Patchwork
• ✗ i915.CI.BAT: failure for Expose modifiers/formats supported by async flips (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/gt: Prevent uninitialized pointer reads (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: display reset cleanups   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: display reset cleanups   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/selftests: Correct frequency handling in RPS power measurement   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/psr: clarify intel_psr_pre_plane_update() conditions   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Add VM_DONTEXPAND to exported buffers   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Add VM_DONTEXPAND to exported buffers   Patchwork
• ✗ Fi.CI.SPARSE: warning for Check Scaler and DSC Prefill Latency Against Vblank (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for Check Scaler and DSC Prefill Latency Against Vblank (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/audio: convert to struct intel_display   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/audio: convert to struct intel_display   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/audio: convert to struct intel_display   Patchwork
• ✓ i915.CI.BAT: success for Enable GuC SLPC default balancing strategies (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/dp: Rework LTTPR transparent mode handling and add support to msm driver   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/bios: Define eDP pipe joiner feature for VBT   Patchwork
• ✓ i915.CI.BAT: success for drm/dp: Rework LTTPR transparent mode handling and add support to msm driver   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dp_mst: Fix error handling/clean up pointer use   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: display reset cleanups   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev5)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev5)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev5)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/psr: clarify intel_psr_pre_plane_update() conditions   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Add VM_DONTEXPAND to exported buffers   Patchwork
• ✗ Fi.CI.SPARSE: warning for PSR DSB support (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for PSR DSB support (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/selftests: Correct frequency handling in RPS power measurement (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Panel Replay mode change without full modeset   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/xe: remove unused xe_pciids.h harder, add missing PCI ID   Patchwork
• ✓ i915.CI.BAT: success for Panel Replay mode change without full modeset   Patchwork
• ✓ i915.CI.BAT: success for drm/xe: remove unused xe_pciids.h harder, add missing PCI ID   Patchwork
• ✗ Fi.CI.BUILD: failure for treewide: const qualify ctl_tables where applicable   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/audio: convert to struct intel_display   Patchwork
• ✓ i915.CI.Full: success for Enable GuC SLPC default balancing strategies (rev3)   Patchwork
• ✗ Fi.CI.BUILD: failure for Display Global Histogram (rev12)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/xe/xe3: Generate and store the L3 bank mask   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/bios: Define eDP pipe joiner feature for VBT   Patchwork
• ✓ i915.CI.BAT: success for drm/xe/xe3: Generate and store the L3 bank mask   Patchwork
• ✗ i915.CI.Full: failure for drm/dp: Rework LTTPR transparent mode handling and add support to msm driver   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/guc: Debug print LRC state entries only if the context is pinned   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/guc: Debug print LRC state entries only if the context is pinned   Patchwork
• ✓ i915.CI.BAT: success for Add helper for range_bpg_offset and minor fixes (rev2)   Patchwork
• ✗ Fi.CI.BUILD: failure for Introduce drm sharpness property (rev6)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev5)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/gt: Replace kmap with its safer kmap_local_page counterpart   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/gt: Replace kmap with its safer kmap_local_page counterpart   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Disable RPG during live selftest   Patchwork
• ✗ Fi.CI.SPARSE: warning for Disable RPG during live selftest   Patchwork
• ✗ i915.CI.BAT: failure for Disable RPG during live selftest   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gt: Ensure irqs' status does not change with spin_unlock   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for treewide: const qualify ctl_tables where applicable (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dp_mst: Fix error handling/clean up pointer use (rev2)   Patchwork
• ✓ i915.CI.BAT: success for treewide: const qualify ctl_tables where applicable (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: replace in_atomic() with manually set flag   Patchwork
• ✓ i915.CI.BAT: success for series starting with [1/2] drm/i915/guc/slpc: Allow GuC SLPC default strategies on MTL+   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: replace in_atomic() with manually set flag   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/slpc: Add sysfs for SLPC power profiles (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/slpc: Add sysfs for SLPC power profiles (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/slpc: Add sysfs for SLPC power profiles (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/selftests: Correct frequency handling in RPS power measurement (rev2)   Patchwork
• ✗ i915.CI.Full: failure for Panel Replay mode change without full modeset   Patchwork
• ✗ i915.CI.Full: failure for drm/xe: remove unused xe_pciids.h harder, add missing PCI ID   Patchwork
• ✗ i915.CI.BAT: failure for series starting with [1/2] drm/xe/display: Unify DPT mapping   Patchwork
• ✗ Fi.CI.SPARSE: warning for PSR DSB support (rev4)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Drop 64bpp YUV formats for SDR planes and improve tracepoints (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Drop 64bpp YUV formats for SDR planes and improve tracepoints (rev2)   Patchwork
• ✓ i915.CI.BAT: success for PSR DSB support (rev4)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Drop 64bpp YUV formats for SDR planes and improve tracepoints (rev2)   Patchwork
• ✗ Fi.CI.BUILD: failure for Fix all typos in i915 (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/xe/xe3: Generate and store the L3 bank mask   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Introduce drm sharpness property (rev7)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Introduce drm sharpness property (rev7)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/selftests: Correct frequency handling in RPS power measurement (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: DSB+VRR (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: DSB+VRR (rev3)   Patchwork
• ✓ i915.CI.BAT: success for Introduce drm sharpness property (rev7)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: DSB+VRR (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/xe/dp: Enable DP tunneling   Patchwork
• ✗ Fi.CI.SPARSE: warning for Fix all typos in i915 (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/xe/dp: Enable DP tunneling   Patchwork
• ✗ i915.CI.BAT: failure for drm/xe/dp: Enable DP tunneling   Patchwork
• ✗ i915.CI.BAT: failure for drm/xe/dp: Enable DP tunneling   Patchwork
• ✗ i915.CI.BAT: failure for drm/xe/dp: Enable DP tunneling   Patchwork
• ✗ i915.CI.BAT: failure for drm/xe/dp: Enable DP tunneling   Patchwork
• ✗ i915.CI.BAT: failure for drm/xe/dp: Enable DP tunneling   Patchwork
• ✗ i915.CI.BAT: failure for Fix all typos in i915 (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/pmu: Remove i915_pmu_event_event_idx()   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dmc_wl: Track pipe interrupt registers (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cmtg: Disable the CMTG (rev5)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/cmtg: Disable the CMTG (rev5)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dmc_wl: Track pipe interrupt registers (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG (rev5)   Patchwork
• ✗ i915.CI.Full: failure for Add helper for range_bpg_offset and minor fixes (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Fix all typos in i915 (rev4)   Patchwork
• ✗ i915.CI.BAT: failure for Fix all typos in i915 (rev4)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Add VM_DONTEXPAND to exported buffers (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/gt: Ensure irqs' status does not change with spin_unlock (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gt: Ensure irqs' status does not change with spin_unlock (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dmc_wl: Track pipe interrupt registers (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dmc_wl: Track pipe interrupt registers (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cmtg: Disable the CMTG (rev6)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/cmtg: Disable the CMTG (rev6)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG (rev6)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/xe3: FBC Dirty rect feature support (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/xe3: FBC Dirty rect feature support (rev3)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev5)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/xe3: FBC Dirty rect feature support (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/xe/dp: Enable DP tunneling (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/gt: Replace kmap with its safer kmap_local_page counterpart   Patchwork
• ✓ i915.CI.BAT: success for drm/xe/dp: Enable DP tunneling (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dp_mst: Fix error handling/clean up pointer use (rev2)   Patchwork
• ✗ i915.CI.Full: failure for treewide: const qualify ctl_tables where applicable (rev2)   Patchwork
• ✗ i915.CI.Full: failure for series starting with [1/2] drm/i915/guc/slpc: Allow GuC SLPC default strategies on MTL+   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: replace in_atomic() with manually set flag   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Add debug print about hw config table size (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/uc: Include requested frequency in slow firmware load messages (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/guc: Debug print LRC state entries only if the context is pinned (rev2)   Patchwork
• ✗ i915.CI.Full: failure for PSR DSB support (rev4)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Drop 64bpp YUV formats for SDR planes and improve tracepoints (rev2)   Patchwork
• ✗ i915.CI.Full: failure for Introduce drm sharpness property (rev7)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: DSB+VRR (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Fix all typos in i915 (rev5)   Patchwork
• ✓ i915.CI.BAT: success for Fix all typos in i915 (rev5)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/pmu: Remove i915_pmu_event_event_idx()   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dmc_wl: Track pipe interrupt registers (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915: Add Wa_22010465259 in its respective WA list   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Add VM_DONTEXPAND to exported buffers (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/xe/dp: Enable DP tunneling (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Add debug print about hw config table size (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/guc: Debug print LRC state entries only if the context is pinned (rev2)   Patchwork
• ✓ i915.CI.Full: success for Add helper for range_bpg_offset and minor fixes (rev2)   Patchwork
• ✗ i915.CI.Full: failure for Fix all typos in i915 (rev5)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dmc_wl: Track pipe interrupt registers (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Check Scaler and DSC Prefill Latency Against Vblank (rev3)   Patchwork
• ✓ i915.CI.BAT: success for Check Scaler and DSC Prefill Latency Against Vblank (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/guc: Debug print LRC state entries only if the context is pinned (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: Add skip link check quirk (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/uc: Include requested frequency in slow firmware load messages (rev4)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/uc: Include requested frequency in slow firmware load messages (rev5)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/uc: Include requested frequency in slow firmware load messages (rev6)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/slpc: Add sysfs for SLPC power profiles (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/slpc: Add sysfs for SLPC power profiles (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/slpc: Add sysfs for SLPC power profiles (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/uc: Include requested frequency in slow firmware load messages (rev7)   Patchwork
• ✗ i915.CI.Full: failure for Check Scaler and DSC Prefill Latency Against Vblank (rev3)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/guc: Debug print LRC state entries only if the context is pinned (rev3)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/display: Add skip link check quirk (rev2)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/slpc: Add sysfs for SLPC power profiles (rev3)   Patchwork
• ✓ i915.CI.Full: success for Check Scaler and DSC Prefill Latency Against Vblank (rev3)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/hdcp: Use correct function to check if encoder is HDMI (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915: Add Wa_22010465259 in its respective WA list (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/uc: Include requested frequency in slow firmware load messages (rev8)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: HDMI C10 PLL entry for 265250 MHz (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: HDMI C10 PLL entry for 265250 MHz (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Add Wa_22010465259 in its respective WA list (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Add Wa_22010465259 in its respective WA list (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Add Wa_22010465259 in its respective WA list (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Add Wa_22010465259 in its respective WA list (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Add Wa_22010465259 in its respective WA list (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/gt: Use spin_lock_irqsave() in interruptible context   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dp: Correct max compressed bpp bounds by using link bpp   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gt: Use spin_lock_irqsave() in interruptible context   Patchwork
• ✓ i915.CI.BAT: success for drm/xe: Add missing SPDX license identifiers   Patchwork
• ✓ i915.CI.Full: success for drm/i915/display: HDMI C10 PLL entry for 265250 MHz (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for series starting with [1/2] drm/modeset: Handle tiled displays in pan_display_atomic.   Patchwork
• ✓ i915.CI.BAT: success for series starting with [1/2] drm/modeset: Handle tiled displays in pan_display_atomic.   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Fix page cleanup on DMA remap failure (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Fix page cleanup on DMA remap failure (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Check Scaler and DSC Prefill Latency Against Vblank (rev4)   Patchwork
• ✗ i915.CI.BAT: failure for Check Scaler and DSC Prefill Latency Against Vblank (rev4)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Provide more information on display faults   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Provide more information on display faults   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Provide more information on display faults   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915: Handle vblank delay vs. fastboot and finish DSB plane update enabling   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/pmu: Drop custom hotplug code   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/pmu: Drop custom hotplug code   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/hdcp: Use correct function to check if encoder is HDMI (rev3)   Patchwork
• ✓ i915.CI.BAT: success for Check Scaler and DSC Prefill Latency Against Vblank (rev4)   Patchwork
• ✗ Fi.CI.BUILD: failure for Extended Wake Timeout (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dp: Correct max compressed bpp bounds by using link bpp (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Check Scaler and DSC Prefill Latency Against Vblank (rev5)   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/i915/dp: Guarantee a minimum HBlank time (rev8)   Patchwork
• ✗ i915.CI.BAT: failure for Check Scaler and DSC Prefill Latency Against Vblank (rev5)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/uc: Include requested frequency in slow firmware load messages (rev8)   Patchwork
• ✓ i915.CI.Full: success for Fix all typos in i915 (rev5)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Handle vblank delay vs. fastboot and finish DSB plane update enabling (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Add Wa_22010465259 in its respective WA list (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/xe/dp: Fix non-display builds with DP tunnelling incorrectly enabled   Patchwork
• ✗ i915.CI.Full: failure for drm/xe: Add missing SPDX license identifiers   Patchwork
• ✗ i915.CI.BAT: failure for drm/xe/dp: Fix non-display builds with DP tunnelling incorrectly enabled   Patchwork
• ✗ i915.CI.Full: failure for series starting with [1/2] drm/modeset: Handle tiled displays in pan_display_atomic.   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Fix page cleanup on DMA remap failure (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/slpc: Add sysfs for SLPC power profiles (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/slpc: Add sysfs for SLPC power profiles (rev4)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/slpc: Add sysfs for SLPC power profiles (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/slpc: Add sysfs for SLPC power profiles (rev5)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/slpc: Add sysfs for SLPC power profiles (rev5)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Provide more information on display faults   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dmc_wl: Introduce debugfs interface   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dmc_wl: Introduce debugfs interface   Patchwork
• ✗ Fi.CI.BUILD: failure for series starting with [1/3] drm/i915/display: Move shutdown sequences under display driver   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dmc_wl: Introduce debugfs interface   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/hdcp: Use correct function to check if encoder is HDMI (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Buiild error in i915/xe (was: [PATCH next 4/7] minmax.h: Use BUILD_BUG_ON_MSG() for the lo < hi test in clamp())   Patchwork
• ✗ i915.CI.BAT: failure for Buiild error in i915/xe (was: [PATCH next 4/7] minmax.h: Use BUILD_BUG_ON_MSG() for the lo < hi test in clamp())   Patchwork
• ✗ Fi.CI.BUILD: failure for Buiild error in i915/xe (was: [PATCH next 4/7] minmax.h: Use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()) (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Handle vblank delay vs. fastboot and finish DSB plane update enabling (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Add HDMI PLL Algorithm for SNPS/C10PHY (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Add HDMI PLL Algorithm for SNPS/C10PHY (rev4)   Patchwork
• ✓ i915.CI.BAT: success for Add HDMI PLL Algorithm for SNPS/C10PHY (rev4)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/gt: Use spin_lock_irqsave() in interruptible context   Patchwork
• ✗ Fi.CI.SPARSE: warning for Fix all typos in i915 (rev6)   Patchwork
• ✓ i915.CI.BAT: success for Fix all typos in i915 (rev6)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for iommu: intel: apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)   Patchwork
• ✓ i915.CI.BAT: success for iommu: intel: apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/slpc: Add sysfs for SLPC power profiles (rev5)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dmc_wl: Introduce debugfs interface   Patchwork
• ✗ Fi.CI.SPARSE: warning for Check Scaler and DSC Prefill Latency Against Vblank (rev6)   Patchwork
• ✓ i915.CI.BAT: success for Check Scaler and DSC Prefill Latency Against Vblank (rev6)   Patchwork
• ✗ i915.CI.Full: failure for Add HDMI PLL Algorithm for SNPS/C10PHY (rev4)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/selftests: Correct frequency handling in RPS power measurement (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Check Scaler and DSC Prefill Latency Against Vblank (rev7)   Patchwork
• ✗ i915.CI.BAT: failure for Check Scaler and DSC Prefill Latency Against Vblank (rev7)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/gt: Use spin_lock_irqsave() in interruptible context   Patchwork
• ✓ i915.CI.BAT: success for Check Scaler and DSC Prefill Latency Against Vblank (rev7)   Patchwork
• ✗ i915.CI.Full: failure for Fix all typos in i915 (rev6)   Patchwork
• ✗ Fi.CI.BUILD: warning for drm/i915/dp: Guarantee a minimum HBlank time (rev9)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: Guarantee a minimum HBlank time (rev9)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: Guarantee a minimum HBlank time (rev9)   Patchwork
• ✗ i915.CI.Full: failure for iommu: intel: apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dp: Guarantee a minimum HBlank time (rev9)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Extended Wake Timeout (rev3)   Patchwork
• ✓ i915.CI.BAT: success for Extended Wake Timeout (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/backlight: Return immediately when scale() finds invalid parameters   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/backlight: Return immediately when scale() finds invalid parameters   Patchwork
• ✗ i915.CI.Full: failure for Check Scaler and DSC Prefill Latency Against Vblank (rev6)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dp: Guarantee a minimum HBlank time (rev9)   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/i915/xe3: FBC Dirty rect feature support (rev4)   Patchwork
• ✗ i915.CI.Full: failure for Check Scaler and DSC Prefill Latency Against Vblank (rev7)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dp: Correct max compressed bpp bounds by using link bpp (rev2)   Patchwork
• ✓ i915.CI.Full: success for Fix all typos in i915 (rev6)   Patchwork
• ✗ i915.CI.Full: failure for Extended Wake Timeout (rev3)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/backlight: Return immediately when scale() finds invalid parameters   Patchwork
• ✓ i915.CI.Full: success for Check Scaler and DSC Prefill Latency Against Vblank (rev7)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: Add WA_14018221282 (rev5)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915: Handle null 'fb' in 'intel_plane_atomic_check_with_state'   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dp: Guarantee a minimum HBlank time (rev9)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/fbdev: Discard large BIOS framebuffers   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/gt: Handle INTEL_WAKEREF_DEF return value in gen8_ggtt_bind_get_ce   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/backlight: Return immediately when scale() finds invalid parameters (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/backlight: Return immediately when scale() finds invalid parameters (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Check Scaler and DSC Prefill Latency Against Vblank (rev8)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Check Scaler and DSC Prefill Latency Against Vblank (rev8)   Patchwork
• ✗ i915.CI.BAT: failure for Check Scaler and DSC Prefill Latency Against Vblank (rev8)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cmtg: Disable the CMTG (rev7)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/cmtg: Disable the CMTG (rev7)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG (rev7)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dp: Correct max compressed bpp bounds by using link bpp (rev2)   Patchwork
• ✓ i915.CI.BAT: success for Check Scaler and DSC Prefill Latency Against Vblank (rev8)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/display: Add WA_14018221282 (rev5)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/dp: Correct max compressed bpp bounds by using link bpp (rev2)   Patchwork
• ✓ i915.CI.Full: success for Add HDMI PLL Algorithm for SNPS/C10PHY (rev4)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/cx0: Set ssc_enabled for c20 too   Patchwork
• ✗ Fi.CI.SPARSE: warning for Extended Wake Timeout (rev4)   Patchwork
• ✓ i915.CI.Full: success for Add HDMI PLL Algorithm for SNPS/C10PHY (rev4)   Patchwork
• ✓ i915.CI.BAT: success for Extended Wake Timeout (rev4)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: Guarantee a minimum HBlank time (rev10)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dp: Guarantee a minimum HBlank time (rev10)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/display: Add WA_14018221282 (rev5)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/selftests: Correct frequency handling in RPS power measurement (rev4)   Patchwork
• ✓ i915.CI.BAT: success for i915/pmu: Fix zero delta busyness issue (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/xe3: FBC Dirty rect feature support (rev5)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/xe3: FBC Dirty rect feature support (rev5)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/xe3: FBC Dirty rect feature support (rev5)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/fbdev: Discard large BIOS framebuffers   Patchwork
• ✗ Fi.CI.SPARSE: warning for series starting with [1/3] drm/i915/display: Move shutdown sequences under display driver   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/backlight: Return immediately when scale() finds invalid parameters (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for series starting with [1/3] drm/i915/display: Move shutdown sequences under display driver   Patchwork
• ✗ i915.CI.Full: failure for Check Scaler and DSC Prefill Latency Against Vblank (rev8)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm: add header tests   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm: add header tests   Patchwork
• ✗ i915.CI.BAT: failure for drm: add header tests   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Improve the display VT-d workarounds   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Improve the display VT-d workarounds   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/lspcon: do not hardcode settle timeout (rev4)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Add HDMI PLL Algorithm for SNPS/C10PHY (rev5)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Add HDMI PLL Algorithm for SNPS/C10PHY (rev5)   Patchwork
• ✗ i915.CI.BAT: failure for Add HDMI PLL Algorithm for SNPS/C10PHY (rev5)   Patchwork
• ✗ Fi.CI.SPARSE: warning for series starting with [1/3] drm/i915/display: Move shutdown sequences under display driver (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for series starting with [1/3] drm/i915/display: Move shutdown sequences under display driver (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cmtg: Disable the CMTG (rev8)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/cmtg: Disable the CMTG (rev8)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG (rev8)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/cmtg: Disable the CMTG (rev8)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/pmu: Drop custom hotplug code (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/pmu: Drop custom hotplug code (rev2)   Patchwork
• ✗ i915.CI.Full: failure for Extended Wake Timeout (rev4)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/selftests: Correct frequency handling in RPS power measurement (rev4)   Patchwork
• ✓ i915.CI.BAT: success for Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset"   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Disable RPG during live selftest   Patchwork
• ✗ i915.CI.Full: failure for i915/pmu: Fix zero delta busyness issue (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915: Disable RPG during live selftest   Patchwork
• ✓ i915.CI.Full: success for drm/i915/xe3: FBC Dirty rect feature support (rev5)   Patchwork
• ✓ i915.CI.Full: success for Check Scaler and DSC Prefill Latency Against Vblank (rev8)   Patchwork
• ✗ i915.CI.BAT: failure for Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset" (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm: strict type checking for drm_device based logging helpers   Patchwork
• ✓ i915.CI.BAT: success for drm: strict type checking for drm_device based logging helpers   Patchwork
• ✓ i915.CI.Full: success for Check Scaler and DSC Prefill Latency Against Vblank (rev8)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/display: Add WA_14018221282 (rev5)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/guc: Always disable interrupt ahead of synchronize_irq   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/guc: Always disable interrupt ahead of synchronize_irq   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Improve the display VT-d workarounds   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/lspcon: do not hardcode settle timeout (rev4)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/pmu: Fix zero delta busyness issue   Patchwork
• ✓ i915.CI.Full: success for drm/i915/cmtg: Disable the CMTG (rev8)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/pmu: Drop custom hotplug code (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm: strict type checking for drm_device based logging helpers   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/guc: Always disable interrupt ahead of synchronize_irq   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/pmu: Fix zero delta busyness issue   Patchwork
• ✗ Fi.CI.BUILD: warning for Enable Aux based Nits brightness control for eDP   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Enable Aux based Nits brightness control for eDP   Patchwork
• ✗ Fi.CI.SPARSE: warning for Enable Aux based Nits brightness control for eDP   Patchwork
• ✗ Fi.CI.DOCS: warning for Enable Aux based Nits brightness control for eDP   Patchwork
• ✓ i915.CI.BAT: success for Enable Aux based Nits brightness control for eDP   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Introduce DRM device wedged event (rev9)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Introduce DRM device wedged event (rev9)   Patchwork
• ✓ i915.CI.BAT: success for Introduce DRM device wedged event (rev9)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/cx0: Set ssc_enabled for c20 too (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/cx0: Set ssc_enabled for c20 too (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Disable RPG during live selftest (rev2)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915: Disable RPG during live selftest (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for PSR DSB support (rev6)   Patchwork
• ✓ i915.CI.BAT: success for PSR DSB support (rev6)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Use VRR timing generator for fixed refresh rate modes (rev7)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Use VRR timing generator for fixed refresh rate modes (rev7)   Patchwork
• ✗ i915.CI.BAT: failure for Use VRR timing generator for fixed refresh rate modes (rev7)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: intel_display conversions and some debug improvements   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: intel_display conversions and some debug improvements   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: intel_display conversions and some debug improvements   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/cmtg: Disable the CMTG (rev9)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/cmtg: Disable the CMTG (rev9)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/cmtg: Disable the CMTG (rev9)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dmc_wl: Do not check for DMC payload   Patchwork
• ✗ i915.CI.Full: failure for Enable Aux based Nits brightness control for eDP   Patchwork
• ✓ i915.CI.Full: success for Introduce DRM device wedged event (rev9)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/cx0: Set ssc_enabled for c20 too (rev2)   Patchwork
• ✗ i915.CI.Full: failure for PSR DSB support (rev6)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: intel_display conversions and some debug improvements   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/cmtg: Disable the CMTG (rev9)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Remove unused live_context_for_engine   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for fix CONFIG_DRM_USE_DYNAMIC_DEBUG=y (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for fix CONFIG_DRM_USE_DYNAMIC_DEBUG=y (rev3)   Patchwork
• ✓ i915.CI.BAT: success for fix CONFIG_DRM_USE_DYNAMIC_DEBUG=y (rev3)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Remove unused live_context_for_engine   Patchwork
• ✗ i915.CI.Full: failure for fix CONFIG_DRM_USE_DYNAMIC_DEBUG=y (rev3)   Patchwork
• ✗ Fi.CI.BUILD: failure for Regression on linux-next (next-20250120)   Patchwork
• ✗ Fi.CI.SPARSE: warning for PSR DSB support (rev7)   Patchwork
• ✗ i915.CI.BAT: failure for PSR DSB support (rev7)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/selftests: avoid using uninitialized context   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: replace in_atomic() with manually set flag (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: replace in_atomic() with manually set flag (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: joiner and Y plane fixes and reorganization   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: joiner and Y plane fixes and reorganization   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: joiner and Y plane fixes and reorganization   Patchwork
• ✓ i915.CI.Full: success for drm/i915: replace in_atomic() with manually set flag (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/guc: Debug print LRC state entries only if the context is pinned (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Fix page cleanup on DMA remap failure (rev4)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Fix page cleanup on DMA remap failure (rev4)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: Give i915 and xe each their own display tracepoints   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dmc_wl: Do not check for DMC payload   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: joiner and Y plane fixes and reorganization   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/guc: Debug print LRC state entries only if the context is pinned (rev4)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Fix page cleanup on DMA remap failure (rev4)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: Give i915 and xe each their own display tracepoints   Patchwork
• ✗ Fi.CI.SPARSE: warning for PSR DSB support (rev8)   Patchwork
• ✓ i915.CI.BAT: success for PSR DSB support (rev8)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/selftests: avoid using uninitialized context (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/selftests: avoid using uninitialized context (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/xe3: FBC Dirty rect feature support (rev6)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/xe3: FBC Dirty rect feature support (rev6)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/xe3: FBC Dirty rect feature support (rev6)   Patchwork
• ✗ Fi.CI.BUILD: warning for Display Global Histogram (rev13)   Patchwork
• ✓ i915.CI.BAT: success for Display Global Histogram (rev13)   Patchwork
• ✗ i915.CI.Full: failure for PSR DSB support (rev8)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/selftests: avoid using uninitialized context (rev2)   Patchwork
• ✗ i915.CI.Full: failure for Display Global Histogram (rev13)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: Allow display PHYs to reset power state   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: Allow display PHYs to reset power state   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: DP and DP MST cleanups   Patchwork
• ✓ i915.CI.BAT: success for drm/i915: DP and DP MST cleanups   Patchwork
• ✗ i915.CI.Full: failure for drm/i915: DP and DP MST cleanups   Patchwork
• ✗ Fi.CI.BUILD: failure for Regression on linux-next (next-20250120) (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/ddi: Fix/simplify port enabling/disabling   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/ddi: Fix/simplify port enabling/disabling   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/ddi: Fix/simplify port enabling/disabling   Patchwork
• ✗ Fi.CI.SPARSE: warning for Add AS_SDP to fastset (rev5)   Patchwork
• ✓ i915.CI.BAT: success for Add AS_SDP to fastset (rev5)   Patchwork
• ✓ i915.CI.Full: success for Add AS_SDP to fastset (rev5)   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/selftests: avoid using uninitialized context (rev3)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dmc_wl: Do not check for DMC payload (rev2)   Patchwork
• ✓ i915.CI.BAT: success for Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset" (rev3)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dmc_wl: Do not check for DMC payload (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/vrr: Fix DSB+VRR usage for PTL+   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/vrr: Fix DSB+VRR usage for PTL+   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/vrr: Fix DSB+VRR usage for PTL+ (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/vrr: Fix DSB+VRR usage for PTL+ (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/xe3: FBC Dirty rect feature support (rev7)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/xe3: FBC Dirty rect feature support (rev7)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/xe3: FBC Dirty rect feature support (rev7)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/vrr: Fix DSB+VRR usage for PTL+ (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/xe3: FBC Dirty rect feature support (rev7)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dp: Return min bpc supported by source instead of 0   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/dp: Return min bpc supported by source instead of 0   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/gt: Use spin_lock_irqsave() in interruptible context (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/selftests: avoid using uninitialized context (rev3)   Patchwork
• ✓ i915.CI.Full: success for drm/i915/dp: Return min bpc supported by source instead of 0   Patchwork
• ✓ i915.CI.Full: success for drm/i915/gt: Use spin_lock_irqsave() in interruptible context (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: dsc fix, refactoring and cleanups   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: dsc fix, refactoring and cleanups   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/dp: dsc fix, refactoring and cleanups   Patchwork
• ✗ i915.CI.BAT: failure for drm/i915/display: implement wa_18038517565   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: dsc fix, refactoring and cleanups (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dp: dsc fix, refactoring and cleanups (rev2)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/dp: dsc fix, refactoring and cleanups (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/ttm: test private resv obj on release/destroy   Patchwork
• ✗ Fi.CI.SPARSE: warning for series starting with [1/2] drm/ttm: test private resv obj on release/destroy   Patchwork
• ✓ i915.CI.BAT: success for series starting with [1/2] drm/ttm: test private resv obj on release/destroy   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/pmu: Drop custom hotplug code (rev3)   Patchwork
• [PATCH v3] drm/i915/gt: Use spin_lock_irqsave() in interruptible context   Maciej Patelczyk
• [PATCH] drm/i915: replace in_atomic() with manually set flag   Maciej Patelczyk
• [PATCH v3 01/16] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()   Lyude Paul
• [PATCH] treewide: const qualify ctl_tables where applicable   Martin K. Petersen
• [PATCHv3 04/11] mm/zswap: Use PG_dropbehind instead of PG_reclaim   Nhat Pham
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer   Laurent Pinchart
• [PATCH] i915/pmu: Fix zero delta busyness issue   Umesh Nerlige Ramappa
• [PATCH] i915/pmu: Fix zero delta busyness issue   Umesh Nerlige Ramappa
• [PATCH] drm/i915/pmu: Fix zero delta busyness issue   Umesh Nerlige Ramappa
• ✗ i915.CI.Full: failure for drm/i915/pmu: Fix zero delta busyness issue   Umesh Nerlige Ramappa
• [PATCH] drm/i915/pmu: Fix zero delta busyness issue   Umesh Nerlige Ramappa
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Umesh Nerlige Ramappa
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Umesh Nerlige Ramappa
• RE: ✗ i915.CI.BAT: failure for drm/i915/display: handle hdmi connector init failures, and no HDMI/DP cases (rev7)   Ravali, JupallyX
• RE: ✗ i915.CI.Full: failure for drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option (rev2)   Ravali, JupallyX
• RE: ✗ i915.CI.BAT: failure for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev5)   Ravali, JupallyX
• RE: ✗ i915.CI.BAT: failure for drm/i915/dmc_wl: Track pipe interrupt registers (rev3)   Ravali, JupallyX
• RE: ✗ i915.CI.Full: failure for Fix all typos in i915 (rev5)   Ravali, JupallyX
• RE: ✗ i915.CI.BAT: failure for drm/i915/gt: Use spin_lock_irqsave() in interruptible context   Ravali, JupallyX
• RE: ✗ i915.CI.Full: failure for Fix all typos in i915 (rev6)   Ravali, JupallyX
• RE: ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG (rev8)   Ravali, JupallyX
• RE: ✗ i915.CI.BAT: failure for drm/i915/dmc_wl: Do not check for DMC payload   Ravali, JupallyX
• [PATCH v4 01/11] mtd: core: always create master device   Miquel Raynal
• [PATCH v4 01/11] mtd: core: always create master device   Miquel Raynal
• [PULL] drm-misc-next   Maxime Ripard
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer   Maxime Ripard
• [PATCH v3 01/16] drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()   Maxime Ripard
• [PULL] drm-misc-next-fixes   Maxime Ripard
• linux-next: build warnings after merge of the drm-misc tree   Maxime Ripard
• Buiild error in i915/xe (was: [PATCH next 4/7] minmax.h: Use BUILD_BUG_ON_MSG() for the lo < hi test in clamp())   Guenter Roeck
• Buiild error in i915/xe (was: [PATCH next 4/7] minmax.h: Use BUILD_BUG_ON_MSG() for the lo < hi test in clamp())   Guenter Roeck
• Buiild error in i915/xe   Guenter Roeck
• Buiild error in i915/xe   Guenter Roeck
• Buiild error in i915/xe   Guenter Roeck
• Buiild error in i915/xe   Guenter Roeck
• Buiild error in i915/xe   Guenter Roeck
• Buiild error in i915/xe   Guenter Roeck
• [PATCH] drm/i915/backlight: Return immediately when scale() finds invalid parameters   Guenter Roeck
• [PATCH v2] drm/i915/backlight: Return immediately when scale() finds invalid parameters   Guenter Roeck
• [PATCH topic/core-for-CI] Revert "vmstat: disable vmstat_work on vmstat_cpu_down_prep()"   Matt Roper
• [PATCH v2] drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE   Matt Roper
• ✗ i915.CI.Full: failure for drm/i915/dmc_wl: Support extra values for dmc_wl_enable for debugging   Matt Roper
• [PATCH v3] drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE   Matt Roper
• [PATCH 1/6] drm/i915/display: convert display reset to struct intel_display *   Matt Roper
• [PATCH 2/6] drm/i915: move pending_fb_pin to struct intel_display   Matt Roper
• [PATCH 3/6] drm/i915: add intel_gt_gpu_reset_clobbers_display() helper   Matt Roper
• [PATCH 4/6] drm/i915/display: add intel_display_gpu_reset_clobbers_display() helper   Matt Roper
• [PATCH 5/6] drm/i915: move gpu_reset_clobbers_display flag to display info   Matt Roper
• [PATCH 6/6] drm/i915/display: convert intel_ddi_buf_trans.c to struct intel_display   Matt Roper
• [PATCH] drm/xe: remove unused xe_pciids.h harder, add missing PCI ID   Matt Roper
• [PATCH] drm/xe/xe3: Generate and store the L3 bank mask   Matt Roper
• ✗ i915.CI.BAT: failure for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev5)   Matt Roper
• ✗ i915.CI.Full: failure for drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value (rev5)   Matt Roper
• ✗ i915.CI.Full: failure for drm/i915: Add Wa_22010465259 in its respective WA list (rev3)   Matt Roper
• [PATCH] treewide: const qualify ctl_tables where applicable   Steven Rostedt
• linux-next: manual merge of the drm-intel tree with the mm tree   Stephen Rothwell
• linux-next: build warnings after merge of the drm-misc tree   Stephen Rothwell
• linux-next: manual merge of the drm-intel tree with the mm tree   Stephen Rothwell
• linux-next: manual merge of the drm tree with the drm-misc-fixes tree   Stephen Rothwell
• linux-next: build warnings after merge of the drm-misc tree   Stephen Rothwell
• linux-next: build warnings after merge of the drm-misc tree   Stephen Rothwell
• linux-next: build warnings after merge of the drm-misc tree   Stephen Rothwell
• linux-next: manual merge of the drm-intel tree with the mm tree   Stephen Rothwell
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Anna Schumaker
• [RFC PATCH] drm/xe/display: Program double buffered LUT registers   Shankar, Uma
• Buiild error in i915/xe   Andy Shevchenko
• [PATCH 0/8] mm: Remove PG_reclaim   Kirill A. Shutemov
• [PATCH 4/8] mm/swap: Use PG_dropbehind instead of PG_reclaim   Kirill A. Shutemov
• [PATCH 8/8] mm: Remove PG_reclaim   Kirill A. Shutemov
• [PATCHv2 05/11] mm/truncate: Use folio_set_dropbehind() instead of deactivate_file_folio()k   Kirill A. Shutemov
• [PATCHv2 11/11] mm: Rename PG_dropbehind to PG_reclaim   Kirill A. Shutemov
• [PATCH v1 1/8] drm/i915/gt: fix typos in i915/gt files.   Andi Shyti
• [PATCH v1 2/8] drm/i915/gvt: fix typos in i915/gvt files   Andi Shyti
• [PATCH v1 3/8] drm/i915/gem: fix typos in i915/gem files   Andi Shyti
• [PATCH v1 4/8] drm/i915/pxp: fix typos in i915/pxp files   Andi Shyti
• [PATCH v1 5/8] drm/i915/selftests: fix typos in i915/selftests files   Andi Shyti
• [PATCH v1 6/8] drm/i915/soc: fix typos in i915/soc files   Andi Shyti
• [PATCH v1 8/8] drm/i915: fix typos in drm/i915 files   Andi Shyti
• [PATCH v1 1/1] drm/i915/gt: Prefer IS_ENABLED() instead of defined() on config option   Andi Shyti
• [PATCH] drm/i915/gt: Replace kmap with its safer kmap_local_page counterpart   Andi Shyti
• [PATCH v1] drm/i915/selftest: Change throttle criteria for rps   Andi Shyti
• [PATCH v1] drm/i915/guc: Always disable interrupt ahead of synchronize_irq   Andi Shyti
• [PATCH 0/2] drm/i915/selftests: Correct frequency handling in RPS power measurement   Andi Shyti
• [PATCH v3] Revert "drm/i915/gt: Log reason for setting TAINT_WARN at reset"   Andi Shyti
• [PATCHv3 02/11] drm/i915/gem: Convert __shmem_writeback() to folios   Andi Shyti
• [PATCHv3 03/11] drm/i915/gem: Use PG_dropbehind instead of PG_reclaim   Andi Shyti
• [PATCH v3] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH 0/3] drm/i915/dmc_wl: Track pipe interrupt registers   Gustavo Sousa
• [PATCH 1/3] drm/i915/display: Use display MMIO functions in intel_display_irq.c   Gustavo Sousa
• [PATCH 2/3] drm/i915/display: Wrap IRQ-specific uncore functions   Gustavo Sousa
• [PATCH 3/3] drm/i915/dmc_wl: Track pipe interrupt registers   Gustavo Sousa
• [PATCH v4 0/2] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH v4 1/2] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH v4 2/2] squash! drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH v2 0/3] drm/i915/dmc_wl: Track pipe interrupt registers   Gustavo Sousa
• [PATCH v2 1/3] drm/i915/display: Use display MMIO functions in intel_display_irq.c   Gustavo Sousa
• [PATCH v2 2/3] drm/i915/display: Wrap IRQ-specific uncore functions   Gustavo Sousa
• [PATCH v2 3/3] drm/i915/dmc_wl: Track pipe interrupt registers   Gustavo Sousa
• [PATCH v5] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH 2/3] drm/i915/display: Wrap IRQ-specific uncore functions   Gustavo Sousa
• [PATCH v4 0/2] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH v2 2/3] drm/i915/display: Wrap IRQ-specific uncore functions   Gustavo Sousa
• [PATCH v5] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• ✗ i915.CI.BAT: failure for drm/i915/dmc_wl: Track pipe interrupt registers (rev3)   Gustavo Sousa
• [PATCH v5] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH v5] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH v5] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• ✗ i915.CI.Full: failure for drm/i915/dmc_wl: Track pipe interrupt registers (rev3)   Gustavo Sousa
• [PATCH v2 0/3] drm/i915/dmc_wl: Track pipe interrupt registers   Gustavo Sousa
• [PATCH 0/4] drm/i915/dmc_wl: Introduce debugfs interface   Gustavo Sousa
• [PATCH 1/4] drm/i915/dmc_wl: Pass offset instead of reg to range table iterator   Gustavo Sousa
• [PATCH 2/4] drm/i915/dmc_wl: Add debugfs for untracked offsets   Gustavo Sousa
• [PATCH 3/4] drm/i915/dmc_wl: Add extra_ranges debugfs   Gustavo Sousa
• [PATCH 4/4] drm/i915/dmc_wl: Enable the debugfs only with enable_dmc_wl_debugfs=1   Gustavo Sousa
• [PATCH v5] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH v6] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG (rev7)   Gustavo Sousa
• [PATCH v7] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• ✗ i915.CI.BAT: failure for drm/i915/cmtg: Disable the CMTG (rev8)   Gustavo Sousa
• [PATCH 2/4] drm/i915/dmc_wl: Add debugfs for untracked offsets   Gustavo Sousa
• [PATCH 3/4] drm/i915/dmc_wl: Add extra_ranges debugfs   Gustavo Sousa
• [PATCH 4/4] drm/i915/dmc_wl: Enable the debugfs only with enable_dmc_wl_debugfs=1   Gustavo Sousa
• [PATCH 4/5] drm/print: Include drm_device.h   Gustavo Sousa
• [PATCH 2/4] drm/i915/dmc_wl: Add debugfs for untracked offsets   Gustavo Sousa
• [PATCH 4/5] drm/print: Include drm_device.h   Gustavo Sousa
• [PATCH v7] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH v7] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH v8] drm/i915/cmtg: Disable the CMTG   Gustavo Sousa
• [PATCH] drm/i915/dmc_wl: Do not check for DMC payload   Gustavo Sousa
• [PATCH 2/4] drm/i915/dmc_wl: Add debugfs for untracked offsets   Gustavo Sousa
• ✗ i915.CI.Full: failure for drm/i915/cmtg: Disable the CMTG (rev9)   Gustavo Sousa
• [PATCH 2/4] drm/i915/dmc_wl: Add debugfs for untracked offsets   Gustavo Sousa
• [PATCH 4/4] drm/i915/dmc_wl: Enable the debugfs only with enable_dmc_wl_debugfs=1   Gustavo Sousa
• ✗ i915.CI.BAT: failure for drm/i915/dmc_wl: Do not check for DMC payload   Gustavo Sousa
• [PATCH 4/4] drm/i915/dmc_wl: Enable the debugfs only with enable_dmc_wl_debugfs=1   Gustavo Sousa
• [PATCH] drm/i915/dmc_wl: Do not check for DMC payload   Gustavo Sousa
• [PATCH 0/4] drm/i915/fb: Deal with Mesa clear color alignment regression   Souza, Jose
• [PATCH] drm/i915/guc: Debug print LRC state entries only if the context is pinned   Daniele Ceraolo Spurio
• [PATCH v2] drm/i915/guc: Debug print LRC state entries only if the context is pinned   Daniele Ceraolo Spurio
• [PATCH v1] drm/i915/guc: Always disable interrupt ahead of synchronize_irq   Daniele Ceraolo Spurio
• [PATCH v2] drm/i915: Fix page cleanup on DMA remap failure   Srinivas, Vidya
• [PATCH v2] drm/i915: Fix page cleanup on DMA remap failure   Srinivas, Vidya
• [PATCH v3] drm/i915: Fix page cleanup on DMA remap failure   Srinivas, Vidya
• [PATCH 3/5] drm/sched: stop passing non struct drm_device to drm_err() and friends   Philipp Stanner
• [PATCH v2] drm/i915/lspcon: do not hardcode settle timeout   Giedrius Statkevičius
• [PATCH 0/8] drm/i915: Provide more information on display faults   Ville Syrjala
• [PATCH 1/8] drm/i915: Add missing else to the if ladder in missing else   Ville Syrjala
• [PATCH 2/8] drm/i915: Introduce a minimal plane error state   Ville Syrjala
• [PATCH 3/8] drm/i915: Pimp display fault reporting   Ville Syrjala
• [PATCH 4/8] drm/i915: Hook in display GTT faults for IVB/HSW   Ville Syrjala
• [PATCH 5/8] drm/i915: Hook in display GTT faults for ILK/SNB   Ville Syrjala
• [PATCH 6/8] drm/i915: Introduce i915_error_regs   Ville Syrjala
• [PATCH 7/8] drm/i915: Un-invert {i9xx,i965}_error_mask()   Ville Syrjala
• [PATCH 8/8] drm/i915: Hook up display fault interrupts for VLV/CHV   Ville Syrjala
• [PATCH 0/8] drm/i915: Handle vblank delay vs. fastboot and finish DSB plane update enabling   Ville Syrjala
• [PATCH 1/8] drm/i915: Keep TRANS_VBLANK.vblank_start==0 on ADL+ even when doing LRR updates   Ville Syrjala
• [PATCH 2/8] drm/i915: Handle interlaced modes in intel_set_transcoder_timings_lrr()   Ville Syrjala
• [PATCH 3/8] drm/i915: Update TRANS_SET_CONTEXT_LATENCY during LRR updates   Ville Syrjala
• [PATCH 4/8] drm/i915: Warn if someone tries to use intel_set_transcoder_timings*() on DSI outputs   Ville Syrjala
• [PATCH 5/8] drm/i915: Extract lrr_params_changed()   Ville Syrjala
• [PATCH 6/8] drm/i915: Allow fastboot to fix up the vblank delay   Ville Syrjala
• [PATCH 7/8] drm/i915/dsb: Add support for triggering VRR push with DSB   Ville Syrjala
• [PATCH 8/8] drm/i915/dsb: Allow DSB to perform commits when VRR is enabled   Ville Syrjala
• [PATCH 0/5] drm/i915: Improve the display VT-d workarounds   Ville Syrjala
• [PATCH 1/5] drm/i915: Move VT-d alignment into plane->min_alignment()   Ville Syrjala
• [PATCH 2/5] drm/i915: Use more optimal VTd alignment for planes   Ville Syrjala
• [PATCH 3/5] drm/i915: Calculate the VT-d guard size in the display code   Ville Syrjala
• [PATCH 4/5] drm/i915: Use per-plane VT-d guard numbers   Ville Syrjala
• [PATCH 5/5] drm/i915/fbdev: Use fb->normal_view.gtt   Ville Syrjala
• [PATCH 00/11] drm/i915: intel_display conversions and some debug improvements   Ville Syrjala
• [PATCH 01/11] drm/i915: Decouple i915_gem_dumb_create() from the display a bit   Ville Syrjala
• [PATCH 02/11] drm/i915: Decouple intel_fb_bo.h interfaces from driver specific types   Ville Syrjala
• [PATCH 03/11] drm/i915: Convert intel_crtc.c to struct intel_display   Ville Syrjala
• [PATCH 04/11] drm/i915: Convert intel_fb.c to struct intel_display   Ville Syrjala
• [PATCH 05/11] drm/i915: Convert intel_display_power_{get, put}*() to intel_display   Ville Syrjala
• [PATCH 06/11] drm/i915: Convert i9xx_plane.c to struct intel_display   Ville Syrjala
• [PATCH 07/11] drm/i915: Finish intel_sprite.c struct intel_display conversion   Ville Syrjala
• [PATCH 08/11] drm/i915: Convert intel_cursor.c to struct intel_display   Ville Syrjala
• [PATCH 09/11] drm/i915: Convert skl_univeral_plane.c to struct intel_display   Ville Syrjala
• [PATCH 10/11] drm/i915: Use DRM_RECT_FMT & co. for plane debugs   Ville Syrjala
• [PATCH 11/11] drm/i915: Pimp plane debugs   Ville Syrjala
• [PATCH 00/11] drm/i915: joiner and Y plane fixes and reorganization   Ville Syrjala
• [PATCH 01/11] drm/i915: Make sure all planes in use by the joiner have their crtc included   Ville Syrjala
• [PATCH 02/11] Revert "drm/i915: Fix NULL ptr deref by checking new_crtc_state"   Ville Syrjala
• [PATCH 03/11] drm/i915: Rework joiner and Y plane dependency handling   Ville Syrjala
• [PATCH 04/11] drm/i915: s/planar_slave/is_y_plane/   Ville Syrjala
• [PATCH 05/11] drm/i915: Extract unlink_nv12_plane()   Ville Syrjala
• [PATCH 06/11] drm/i915: Remove pointless visible check in unlink_nv12_plane()   Ville Syrjala
• [PATCH 07/11] drm/i915: Extract link_nv12_planes()   Ville Syrjala
• [PATCH 08/11] drm/i915: Rename the variables in icl_check_nv12_planes()   Ville Syrjala
• [PATCH 09/11] drm/i915: Move icl+ nv12 plane register mangling into skl_universal_plane.c   Ville Syrjala
• [PATCH 10/11] drm/i915: Relocate intel_atomic_check_planes()   Ville Syrjala
• [PATCH 11/11] drm/i915: Pimp the Y plane selection debugs   Ville Syrjala
• [PATCH] drm/i915: Give i915 and xe each their own display tracepoints   Ville Syrjala
• [PATCH 0/3] drm/i915/vrr: Fix DSB+VRR usage for PTL+   Ville Syrjala
• [PATCH 1/3] drm/i915/dsb: Introduce intel_dsb_poll()   Ville Syrjala
• [PATCH 2/3] drm/i915/vrr: Reorder the DSB "wait for safe window" vs. TRANS_PUSH   Ville Syrjala
• [PATCH 3/3] drm/i915/vrr: Poll for the push send bit to clear on the DSB   Ville Syrjala
• [PATCH 01/18] drm/i915: Extract intel_crtc_vblank_delay()   Ville Syrjälä
• [PATCH 1/8] drm/i915/scaler: Extract skl_scaler_min_src_size()   Ville Syrjälä
• [PATCH 6/8] drm/i915/scaler: Pimp scaler debugs   Ville Syrjälä
• [PATCH 4/4] drm/uapi/fourcc: Document the Intel clear color alignment better   Ville Syrjälä
• [PATCH v5] drm/i915/cmtg: Disable the CMTG   Ville Syrjälä
• [PATCH v5] drm/i915/cmtg: Disable the CMTG   Ville Syrjälä
• [PATCH 00/18] drm/i915: DSB+VRR   Ville Syrjälä
• [PATCH] drm/i915: Fix page cleanup on DMA remap failure   Ville Syrjälä
• [PATCH] drm/i915: Fix page cleanup on DMA remap failure   Ville Syrjälä
• [PATCH] drm/i915: Fix page cleanup on DMA remap failure   Ville Syrjälä
• [PATCH] drm/i915: Fix page cleanup on DMA remap failure   Ville Syrjälä
• [PATCH v5] drm/i915/cmtg: Disable the CMTG   Ville Syrjälä
• [PATCH 1/4] drm/i915: Drop 64bpp YUV formats from ICL+ SDR planes   Ville Syrjälä
• [PATCH v3 1/4] drm/i915/display: avoid calling fbc activate if fbc is active   Ville Syrjälä
• [PATCH v3 3/4] drm/i915/xe3: add dirty rect support for FBC   Ville Syrjälä
• [Intel-gfx] [PATCH v2 18/19] drm/i915/dsb: Re-instate DSB for LUT updates   Ville Syrjälä
• [PATCH v3 06/10] drm/i915/psr: Allow writing PSR2_MAN_TRK_CTL using DSB   Ville Syrjälä
• [PATCH v3 10/10] drm/i915/psr: Allow DSB usage when PSR is enabled   Ville Syrjälä
• [PATCH v3 10/10] drm/i915/psr: Allow DSB usage when PSR is enabled   Ville Syrjälä
• [PATCH v3 10/10] drm/i915/psr: Allow DSB usage when PSR is enabled   Ville Syrjälä
• [PATCH 3/8] drm/i915: Pimp display fault reporting   Ville Syrjälä
• [PATCH v3 10/10] drm/i915/psr: Allow DSB usage when PSR is enabled   Ville Syrjälä
• [PATCH 6/8] drm/i915: Allow fastboot to fix up the vblank delay   Ville Syrjälä
• [PATCH v3 2/5] drm/plane: Expose function to create format/modifier blob   Ville Syrjälä
• [PATCH v3 4/5] drm/i915/display: Populate list of async supported formats/modifiers   Ville Syrjälä
• [PATCH v3 4/5] drm/i915/display: Populate list of async supported formats/modifiers   Ville Syrjälä
• [PATCH v3 10/10] drm/i915/psr: Allow DSB usage when PSR is enabled   Ville Syrjälä
• [PATCH 1/8] drm/i915: Keep TRANS_VBLANK.vblank_start==0 on ADL+ even when doing LRR updates   Ville Syrjälä
• [PATCH v3 10/10] drm/i915/psr: Allow DSB usage when PSR is enabled   Ville Syrjälä
• [PATCH 00/23] Use VRR timing generator for fixed refresh rate modes   Ville Syrjälä
• [PATCH v4 1/6] drm/i915/xe3: avoid calling fbc activate if fbc is active   Ville Syrjälä
• [PATCH v4 4/6] drm/i915/xe3: add dirty rect support for FBC   Ville Syrjälä
• [PATCH v3 2/5] drm/plane: Expose function to create format/modifier blob   Ville Syrjälä
• [PATCH v4 11/13] drm/i915/display: Evade scanline 0 as well if PSR1 or PSR2 is enabled   Ville Syrjälä
• [PATCH v4 12/13] drm/i915/display: Ensure we have "Frame Change" event in DSB commit   Ville Syrjälä
• [PATCH v4 10/13] drm/i915/psr: Remove DSB_SKIP_WAITS_EN chicken bit   Ville Syrjälä
• [PATCH v4 09/13] drm/i915/display: Don't use DSB if psr mode changing   Ville Syrjälä
• [PATCH v4 12/13] drm/i915/display: Ensure we have "Frame Change" event in DSB commit   Ville Syrjälä
• [PATCH v4 09/13] drm/i915/display: Don't use DSB if psr mode changing   Ville Syrjälä
• [PATCH v4 11/13] drm/i915/display: Evade scanline 0 as well if PSR1 or PSR2 is enabled   Ville Syrjälä
• [PATCH v4 11/13] drm/i915/display: Evade scanline 0 as well if PSR1 or PSR2 is enabled   Ville Syrjälä
• [PATCH v7] drm/i915/cmtg: Disable the CMTG   Ville Syrjälä
• [PATCH v7] drm/i915/cmtg: Disable the CMTG   Ville Syrjälä
• [PATCH 04/35] drm/i915/dp: Compute as_sdp.vtotal based on vrr timings   Ville Syrjälä
• [PATCH 24/35] drm/i915/vrr: Adjust Vtotal for MSA for fixed timings   Ville Syrjälä
• [PATCH 11/35] drm/i915/vrr: Avoid prepare vrr timings for cmrr   Ville Syrjälä
• [PATCH 20/35] drm/i915/vrr: Avoid sending PUSH when VRR TG is used with Fixed refresh rate   Ville Syrjälä
• [PATCH 21/35] drm/i915/display: Enable MSA Ignore Timing PAR only when in not fixed_rr mode   Ville Syrjälä
• [PATCH 31/35] drm/i915/vrr: Always set vrr vmax/vmin/flipline in vrr_{enable/disable}   Ville Syrjälä
• [PATCH 1/5] drm/i915: Move VT-d alignment into plane->min_alignment()   Ville Syrjälä
• [PATCH 1/5] drm/i915: Move VT-d alignment into plane->min_alignment()   Ville Syrjälä
• [PATCH v2] drm/i915: Fix page cleanup on DMA remap failure   Ville Syrjälä
• [PATCH v3 2/5] drm/plane: Expose function to create format/modifier blob   Ville Syrjälä
• [PATCH v5 4/7] drm/i915/display: update and store the plane damage clips   Ville Syrjälä
• [PATCH v3] drm/i915: Fix page cleanup on DMA remap failure   Ville Syrjälä
• [PATCH] drm/i915: Give i915 and xe each their own display tracepoints   Ville Syrjälä
• [PATCH] drm/i915: Give i915 and xe each their own display tracepoints   Ville Syrjälä
• [PATCH 1/5] drm/i915: Move VT-d alignment into plane->min_alignment()   Ville Syrjälä
• [PATCH v1] drm/i915/selftests: Correct frequency handling in RPS power measurement   Riana Tauro
• [PATCH v2] drm/i915/selftests: Correct frequency handling in RPS power measurement   Riana Tauro
• [PATCH i-g-t v4 1/2] lib/igt_perf: Add utils to extract PMU event info   Riana Tauro
• [PATCH i-g-t v4 2/2] tests/xe/pmu: Add pmu tests   Riana Tauro
• [PATCH i-g-t v6 1/2] lib/igt_perf: Add utils to extract PMU event info   Riana Tauro
• [PATCH i-g-t v7 2/3] lib/igt_perf: Add utils to extract PMU event info   Riana Tauro
• [PATCH i-g-t v7 3/3] tests/xe/pmu: Add pmu tests for gt-c6   Riana Tauro
• [PATCH] drm/i915/display: HDMI C10 PLL entry for 265250 MHz   Clint Taylor
• [PATCH] drm/i915/fbdev: Discard large BIOS framebuffers   Atharva Tiwari
• Buiild error in i915/xe (was: [PATCH next 4/7] minmax.h: Use BUILD_BUG_ON_MSG() for the lo < hi test in clamp())   Linus Torvalds
• Buiild error in i915/xe   Linus Torvalds
• Buiild error in i915/xe   Linus Torvalds
• [PATCH v2] drm/i915/backlight: Return immediately when scale() finds invalid parameters   Linus Torvalds
• [PATCH] drm/xe: remove unused xe_pciids.h harder, add missing PCI ID   Upadhyay, Tejas
• [PULL] drm-intel-fixes   Tvrtko Ursulin
• [PATCH v2] drm/i915/gt: Ensure irqs' status does not change with spin_unlock   Tvrtko Ursulin
• [PULL] drm-intel-fixes   Tvrtko Ursulin
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Tvrtko Ursulin
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Tvrtko Ursulin
• [PATCH] drm/i915/display: Disable AuxCCS framebuffers if built for Xe   Tvrtko Ursulin
• [PATCH] drm/i915/pmu: Drop custom hotplug code   Tvrtko Ursulin
• [PATCH] drm/i915/display: Disable AuxCCS framebuffers if built for Xe   Tvrtko Ursulin
• [PATCH v4 00/11] mtd: add driver for Intel discrete graphics   Alexander Usyskin
• [PATCH v4 01/11] mtd: core: always create master device   Alexander Usyskin
• [PATCH v4 02/11] mtd: add driver for intel graphics non-volatile memory device   Alexander Usyskin
• [PATCH v4 03/11] mtd: intel-dg: implement region enumeration   Alexander Usyskin
• [PATCH v4 04/11] mtd: intel-dg: implement access functions   Alexander Usyskin
• [PATCH v4 05/11] mtd: intel-dg: register with mtd   Alexander Usyskin
• [PATCH v4 06/11] mtd: intel-dg: align 64bit read and write   Alexander Usyskin
• [PATCH v4 07/11] mtd: intel-dg: wake card on operations   Alexander Usyskin
• [PATCH v4 08/11] drm/i915/nvm: add nvm device for discrete graphics   Alexander Usyskin
• [PATCH v4 09/11] drm/i915/nvm: add support for access mode   Alexander Usyskin
• [PATCH v4 10/11] drm/xe/nvm: add on-die non-volatile memory device   Alexander Usyskin
• [PATCH v4 11/11] drm/xe/nvm: add support for access mode   Alexander Usyskin
• [PATCH v3 06/10] mtd: intel-dg: wake card on operations   Usyskin, Alexander
• [PATCH v4 03/11] mtd: intel-dg: implement region enumeration   Usyskin, Alexander
• [PATCH v4 02/11] mtd: add driver for intel graphics non-volatile memory device   Usyskin, Alexander
• [PATCH v4 06/11] mtd: intel-dg: align 64bit read and write   Usyskin, Alexander
• [PATCH v4 01/11] mtd: core: always create master device   Usyskin, Alexander
• [PATCH v4 01/11] mtd: core: always create master device   Usyskin, Alexander
• [PATCH v4 01/11] mtd: core: always create master device   Usyskin, Alexander
• [PATCH v4 01/11] mtd: core: always create master device   Usyskin, Alexander
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer   Geert Uytterhoeven
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer   Geert Uytterhoeven
• linux-next: build warnings after merge of the drm-misc tree   Tomi Valkeinen
• [PATCH v3 0/4] drm/dp: Rework LTTPR transparent mode handling and add support to msm driver   Abel Vesa
• [PATCH v3 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Abel Vesa
• [PATCH v3 2/4] drm/nouveau/dp: Use the generic helper to control LTTPR transparent mode   Abel Vesa
• [PATCH v3 3/4] drm/i915/dp: Use the generic helper to control LTTPR transparent mode   Abel Vesa
• [PATCH v3 4/4] drm/msm/dp: Add support for LTTPR handling   Abel Vesa
• [PATCH v3 3/4] drm/i915/dp: Use the generic helper to control LTTPR transparent mode   Abel Vesa
• [PATCH v3 3/4] drm/i915/dp: Use the generic helper to control LTTPR transparent mode   Abel Vesa
• [PATCH v3 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Abel Vesa
• [PATCH v4 0/4] drm/dp: Rework LTTPR transparent mode handling and add support to msm driver   Abel Vesa
• [PATCH v4 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Abel Vesa
• [PATCH v4 2/4] drm/nouveau/dp: Use the generic helper to control LTTPR transparent mode   Abel Vesa
• [PATCH v4 3/4] drm/i915/dp: Use the generic helper to control LTTPR transparent mode   Abel Vesa
• [PATCH v4 4/4] drm/msm/dp: Add support for LTTPR handling   Abel Vesa
• [PATCH v4 4/4] drm/msm/dp: Add support for LTTPR handling   Abel Vesa
• [PATCH v4 4/4] drm/msm/dp: Add support for LTTPR handling   Abel Vesa
• [PATCH v4 1/4] drm/dp: Add helper to set LTTPRs in transparent mode   Abel Vesa
• [PATCH 0/2] drm: add header tests   Simona Vetter
• [PATCH 3/5] drm/sched: stop passing non struct drm_device to drm_err() and friends   Simona Vetter
• [PULL] drm-misc-fixes   Simona Vetter
• [PATCH 4/5] drm/print: Include drm_device.h   Simona Vetter
• [PULL] drm-misc-next-fixes   Simona Vetter
• Regression on linux-next (next-20250120)   Al Viro
• Regression on linux-next (next-20250120)   Al Viro
• Regression on linux-next (next-20250120)   Al Viro
• Regression on linux-next (next-20250120)   Al Viro
• ✗ Fi.CI.BUILD: failure for Regression on linux-next (next-20250120) (rev2)   Al Viro
• [PATCH v3] drm/i915: Add Wa_22010465259 in its respective WA list   Vivekanandan, Balasubramani
• [PATCH 2/4] drm/i915/dmc_wl: Add debugfs for untracked offsets   Vivekanandan, Balasubramani
• [PATCH 3/4] drm/i915/dmc_wl: Add extra_ranges debugfs   Vivekanandan, Balasubramani
• [PATCH 4/4] drm/i915/dmc_wl: Enable the debugfs only with enable_dmc_wl_debugfs=1   Vivekanandan, Balasubramani
• [PATCH 3/4] drm/i915/dmc_wl: Add extra_ranges debugfs   Vivekanandan, Balasubramani
• [PATCH 2/4] drm/i915/dmc_wl: Add debugfs for untracked offsets   Vivekanandan, Balasubramani
• [PULL] drm-xe-next   Rodrigo Vivi
• [PATCH] Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"   Rodrigo Vivi
• [PULL] drm-intel-next   Rodrigo Vivi
• [PATCH] drm/i915/gt: Prevent uninitialized pointer reads   Rodrigo Vivi
• [PATCH 0/3] Enable GuC SLPC default balancing strategies v2   Rodrigo Vivi
• [PATCH 1/3] drm/i915: Increase the timeout of the spinners   Rodrigo Vivi
• [PATCH 2/3] drm/i915/guc/slpc: Enable GuC SLPC default strategies   Rodrigo Vivi
• [PATCH 3/3] drm/i915/guc/slpc: Print more SLPC debug status information   Rodrigo Vivi
• [PATCH 2/3] drm/i915/guc/slpc: Enable GuC SLPC default strategies   Rodrigo Vivi
• linux-next: manual merge of the drm-intel tree with the mm tree   Rodrigo Vivi
• [PATCH 2/3] drm/i915/guc/slpc: Enable GuC SLPC default strategies   Rodrigo Vivi
• [PATCH v1] drm/i915/selftest: Change throttle criteria for rps   Rodrigo Vivi
• [PATCH 0/3] drm/i915/gvt: Deadcoding   Rodrigo Vivi
• [PATCH 0/3] Enable GuC SLPC default balancing strategies v2   Rodrigo Vivi
• [PATCH 1/2] drm/i915/guc/slpc: Allow GuC SLPC default strategies on MTL+   Rodrigo Vivi
• [PATCH 2/2] drm/i915/guc/slpc: Print more SLPC debug status information   Rodrigo Vivi
• [PULL] drm-xe-next   Rodrigo Vivi
• [PATCH 1/2] drm/i915/mtl: Disable render power-gating during selftest only   Rodrigo Vivi
• [PATCH 0/3] drm/i915/gvt: Deadcoding   Rodrigo Vivi
• [PATCH 1/3] drm/i915/audio: convert to struct intel_display   Rodrigo Vivi
• [PATCH 2/3] drm/i915/audio: convert LPE audio to struct intel_display   Rodrigo Vivi
• [PATCH 3/3] drm/i915/audio: rename function prefixes from i915 to intel   Rodrigo Vivi
• [PATCH] drm/i915/dp: Correct max compressed bpp bounds by using link bpp   Rodrigo Vivi
• [PATCH] drm/i915/dp: Correct max compressed bpp bounds by using link bpp   Rodrigo Vivi
• [PATCH v2] drm/i915/slpc: Add sysfs for SLPC power profiles   Rodrigo Vivi
• [PATCH v2] drm/i915/slpc: Add sysfs for SLPC power profiles   Rodrigo Vivi
• [PATCH v2] drm/i915/slpc: Add sysfs for SLPC power profiles   Rodrigo Vivi
• [PATCH v3] drm/i915/slpc: Add sysfs for SLPC power profiles   Rodrigo Vivi
• [PATCH 1/3] drm/i915/display: Move shutdown sequences under display driver   Rodrigo Vivi
• [PATCH 2/3] drm/xe: At shutdown disable commit helpers instead of flushing   Rodrigo Vivi
• [PATCH 3/3] drm/xe: Use i915-display shutdown sequence directly   Rodrigo Vivi
• [PATCH v4] drm/i915/slpc: Add sysfs for SLPC power profiles   Rodrigo Vivi
• [PATCH v4 3/8] drm/i915/gem: fix typos in i915/gem files   Rodrigo Vivi
• [PATCH 3/3] drm/xe: Use i915-display shutdown sequence directly   Rodrigo Vivi
• [PATCH v2] drm/i915/backlight: Return immediately when scale() finds invalid parameters   Rodrigo Vivi
• [PATCH] i915/pmu: Fix zero delta busyness issue   Rodrigo Vivi
• [PATCH] i915/pmu: Fix zero delta busyness issue   Rodrigo Vivi
• [PATCH 1/3] drm/i915/display: Move shutdown sequences under display driver   Rodrigo Vivi
• [PATCH 2/3] drm/xe: At shutdown disable commit helpers instead of flushing   Rodrigo Vivi
• [PATCH 3/3] drm/xe: Use i915-display shutdown sequence directly   Rodrigo Vivi
• [PATCH v4 3/8] drm/i915/gem: fix typos in i915/gem files   Rodrigo Vivi
• [PATCH v2] drm/i915/lspcon: do not hardcode settle timeout   Rodrigo Vivi
• [PATCH v3] drm/i915: Disable RPG during live selftest   Rodrigo Vivi
• [PATCH] drm/i915/pmu: Fix zero delta busyness issue   Rodrigo Vivi
• [PATCH] drm/i915: Remove unused live_context_for_engine   Rodrigo Vivi
• [PATCH v2] drm/i915/lspcon: do not hardcode settle timeout   Rodrigo Vivi
• [PATCH 3/3] drm/xe: Use i915-display shutdown sequence directly   Rodrigo Vivi
• TLB Invalidation time out on i915 SR-IOV passthrough   Rodrigo Vivi
• [PATCH v4 10/11] drm/xe/nvm: add on-die non-volatile memory device   Rodrigo Vivi
• [PATCH v4 07/11] mtd: intel-dg: wake card on operations   Rodrigo Vivi
• [PATCH] drm/i915/dp: Return min bpc supported by source instead of 0   Rodrigo Vivi
• [PATCH v2] drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE   Ravi Kumar Vodapalli
• [PATCH] drm/i915/bios: Define eDP pipe joiner feature for VBT   Vodapalli, Ravi Kumar
• [PATCH v3] drm/i915/display: Don't update DBUF_TRACKER_STATE_SERVICE   Ravi Kumar Vodapalli
• [PATCH v4] drm/i915/slpc: Add sysfs for SLPC power profiles   Michal Wajdeczko
• TLB Invalidation time out on i915 SR-IOV passthrough   Michal Wajdeczko
• [PATCH 0/3] drm/i915/gvt: Deadcoding   Zhenyu Wang
• [PATCH 0/3] drm/i915/gvt: Deadcoding   Zhenyu Wang
• [PATCH 0/3] drm/i915/gvt: Deadcoding   Zhenyu Wang
• GVT-g status (was: Re: [PATCH 0/3] drm/i915/gvt: Deadcoding)   Zhenyu Wang
• GVT-g status (was: Re: [PATCH 0/3] drm/i915/gvt: Deadcoding)   Zhi Wang
• GVT-g status (was: Re: [PATCH 0/3] drm/i915/gvt: Deadcoding)   Zhi Wang
• [PATCH v2] drm/i915/selftests: avoid using uninitialized context   Mikolaj Wasiak
• [PATCH v2] drm/i915/selftests: avoid using uninitialized context   Mikolaj Wasiak
• [PATCH v4 01/11] mtd: core: always create master device   Richard Weinberger
• [PATCH v4 01/11] mtd: core: always create master device   Richard Weinberger
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer   Harry Wentland
• [PATCH 0/8] mm: Remove PG_reclaim   Matthew Wilcox
• [PATCH 8/8] mm: Remove PG_reclaim   Matthew Wilcox
• [PATCHv2 05/11] mm/truncate: Use folio_set_dropbehind() instead of deactivate_file_folio()   Matthew Wilcox
• [PATCH v2] treewide: const qualify ctl_tables where applicable   Matthew Wilcox
• [PATCHv3 02/11] drm/i915/gem: Convert __shmem_writeback() to folios   Matthew Wilcox
• [PATCH] treewide: const qualify ctl_tables where applicable   Darrick J. Wong
• [PATCH 2/5] drm/rockchip: stop passing non struct drm_device to drm_err() and friends   Andy Yan
• [PATCH 2/5] drm/rockchip: stop passing non struct drm_device to drm_err() and friends   Andy Yan
• [PATCH] drm/i915: Handle null 'fb' in 'intel_plane_atomic_check_with_state'   Lu Yao
• TLB Invalidation time out on i915 SR-IOV passthrough   MARDI Youness
• [PATCH 8/8] mm: Remove PG_reclaim   Yu Zhao
• [PATCH 4/8] mm/swap: Use PG_dropbehind instead of PG_reclaim   Yu Zhao
• [PATCH 4/8] mm/swap: Use PG_dropbehind instead of PG_reclaim   Yu Zhao
• [PATCHv2 05/11] mm/truncate: Use folio_set_dropbehind() instead of deactivate_file_folio()   Yu Zhao
• [PATCHv2 09/11] mm: Remove PG_reclaim   Yu Zhao
• [PATCHv2 11/11] mm: Rename PG_dropbehind to PG_reclaim   Yu Zhao
• [PATCHv2 05/11] mm/truncate: Use folio_set_dropbehind() instead of deactivate_file_folio()   Yu Zhao
• [PATCHv3 05/11] mm/truncate: Use folio_set_dropbehind() instead of deactivate_file_folio()   Yu Zhao
• [PATCHv3 01/11] mm/migrate: Transfer PG_dropbehind to the new folio   Yu Zhao
• [PATCHv3 11/11] mm: Rename PG_dropbehind to PG_reclaim   Yu Zhao
• [PATCH v2 0/5] drm/connector: make mode_valid() callback accept const mode pointer   Thomas Zimmermann
• [PATCH 00/12] drm/{i915,xe}: Convert to DRM client setup   Thomas Zimmermann
• [PATCH 10/12] drm/{i915,xe}: Run DRM default client setup   Thomas Zimmermann
• [PATCH 1/2] drm/modeset: Handle tiled displays in pan_display_atomic.   Thomas Zimmermann
• [PATCH 2/2] drm/client: Handle tiled displays better   Thomas Zimmermann
• [PULL] drm-misc-fixes   Thomas Zimmermann
• [PATCH] drm/atomic-helpers: remove legacy_cursor_update hacks   maxime at cerno.tech
• [PATCH v1] drm/i915/selftests: Correct frequency handling in RPS power measurement   sk.anirban at intel.com
• [PATCH v2] drm/i915/selftests: Correct frequency handling in RPS power measurement   sk.anirban at intel.com
• [PATCH 1/2] drm/i915/mtl: Disable render power-gating during selftest only   kernel test robot
• [PATCH 1/2] drm/i915/mtl: Disable render power-gating during selftest only   kernel test robot
• [PATCH] drm/i915: Remove unused live_context_for_engine   linux at treblig.org