[PATCH v6 04/17] drm/i915/display: Add VRR DC balance registers

[Nautiyal, Ankit K]

On 6/4/2025 1:05 AM, Mitul Golani wrote:
> Add VRR register offsets and bits to access DC Balance configuration.
>
> --v2:
> - Separate register definitions. (Ankit)
> - Remove usage of dev_priv. (Jani, Nikula)
>
> --v3:
> - Convert register address offset, from capital to small. (Ankit)
> - Move mask bits near to register offsets. (Ankit)
>
> --v4:
> - Use _MMIO_TRANS wherever possible. (Jani)
>
> Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani at intel.com>

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>


> ---
>   drivers/gpu/drm/i915/display/intel_vrr_regs.h | 44 +++++++++++++++++++
>   1 file changed, 44 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_vrr_regs.h b/drivers/gpu/drm/i915/display/intel_vrr_regs.h
> index 09cdd50d6187..b90dad473d8d 100644
> --- a/drivers/gpu/drm/i915/display/intel_vrr_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_vrr_regs.h
> @@ -9,6 +9,49 @@
>   #include "intel_display_reg_defs.h"
>   
>   /* VRR registers */
> +#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A	0x604d4
> +#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_B	0x614d4
> +#define TRANS_VRR_DCB_ADJ_FLIPLINE_CFG(trans)	_MMIO_TRANS(trans, \
> +							    _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A, \
> +							    _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_B)
> +#define VRR_DCB_ADJ_FLIPLINE_CNT_MASK		REG_GENMASK(31, 24)
> +#define VRR_DCB_ADJ_FLIPLINE_MASK		REG_GENMASK(19, 0)
> +#define VRR_DCB_ADJ_FLIPLINE(flipline)		REG_FIELD_PREP(VRR_DCB_ADJ_FLIPLINE_MASK, \
> +							       (flipline))
> +
> +#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_A		0x604d8
> +#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_B		0x614d8
> +#define TRANS_VRR_DCB_ADJ_VMAX_CFG(trans)	_MMIO_TRANS(trans, \
> +							    _TRANS_VRR_DCB_ADJ_VMAX_CFG_A, \
> +							    _TRANS_VRR_DCB_ADJ_VMAX_CFG_B)
> +#define VRR_DCB_ADJ_VMAX_CNT_MASK		REG_GENMASK(31, 24)
> +#define VRR_DCB_ADJ_VMAX_MASK			REG_GENMASK(19, 0)
> +#define VRR_DCB_ADJ_VMAX(vmax)			REG_FIELD_PREP(VRR_DCB_ADJ_VMAX_MASK, (vmax))
> +
> +#define _TRANS_VRR_DCB_FLIPLINE_A		0x60418
> +#define _TRANS_VRR_DCB_FLIPLINE_B		0x61418
> +#define TRANS_VRR_DCB_FLIPLINE(trans)		_MMIO_TRANS(trans, \
> +							    _TRANS_VRR_DCB_FLIPLINE_A, \
> +							    _TRANS_VRR_DCB_FLIPLINE_B)
> +#define VRR_DCB_FLIPLINE_MASK			REG_GENMASK(19, 0)
> +#define VRR_DCB_FLIPLINE(flipline)		REG_FIELD_PREP(VRR_DCB_FLIPLINE_MASK, \
> +							       (flipline))
> +
> +#define _TRANS_VRR_DCB_VMAX_A			0x60414
> +#define _TRANS_VRR_DCB_VMAX_B			0x61414
> +#define TRANS_VRR_DCB_VMAX(trans)		_MMIO_TRANS(trans, \
> +							     _TRANS_VRR_DCB_VMAX_A, \
> +							     _TRANS_VRR_DCB_VMAX_B)
> +#define VRR_DCB_VMAX_MASK			REG_GENMASK(19, 0)
> +#define VRR_DCB_VMAX(vmax)			REG_FIELD_PREP(VRR_DCB_VMAX_MASK, (vmax))
> +
> +#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_A		0x604c0
> +#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_B		0x614c0
> +#define TRANS_ADAPTIVE_SYNC_DCB_CTL(trans)	_MMIO_TRANS(trans, \
> +							     _TRANS_ADAPTIVE_SYNC_DCB_CTL_A, \
> +							     _TRANS_ADAPTIVE_SYNC_DCB_CTL_B)
> +#define ADAPTIVE_SYNC_COUNTER_EN		REG_BIT(31)
> +
>   #define _TRANS_VRR_CTL_A			0x60420
>   #define _TRANS_VRR_CTL_B			0x61420
>   #define _TRANS_VRR_CTL_C			0x62420
> @@ -20,6 +63,7 @@
>   #define  VRR_CTL_PIPELINE_FULL_MASK		REG_GENMASK(10, 3)
>   #define  VRR_CTL_PIPELINE_FULL(x)		REG_FIELD_PREP(VRR_CTL_PIPELINE_FULL_MASK, (x))
>   #define  VRR_CTL_PIPELINE_FULL_OVERRIDE		REG_BIT(0)
> +#define  VRR_CTL_DCB_ADJ_ENABLE			REG_BIT(28)
>   #define  XELPD_VRR_CTL_VRR_GUARDBAND_MASK	REG_GENMASK(15, 0)
>   #define  XELPD_VRR_CTL_VRR_GUARDBAND(x)		REG_FIELD_PREP(XELPD_VRR_CTL_VRR_GUARDBAND_MASK, (x))
>