June 2025 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Jun 2 06:44:42 UTC 2025
Ending: Mon Jun 30 22:20:02 UTC 2025
Messages: 1320

• ✓ i915.CI.Full: success for drm/i915/display: Fix u32 overflow in SNPS PHY HDMI PLL setup   Patchwork
• [PATCH v4 2/9] dma-fence: Use a flag for 64-bit seqnos   Tvrtko Ursulin
  • [PATCH v4 2/9] dma-fence: Use a flag for 64-bit seqnos   Christian König
    • [PATCH v4 2/9] dma-fence: Use a flag for 64-bit seqnos   Tvrtko Ursulin
      • [PATCH v4 2/9] dma-fence: Use a flag for 64-bit seqnos   Christian König
      • [PATCH v4 2/9] dma-fence: Use a flag for 64-bit seqnos   Tvrtko Ursulin
      • [PATCH v4 2/9] dma-fence: Use a flag for 64-bit seqnos   Christian König
      • [PATCH v4 2/9] dma-fence: Use a flag for 64-bit seqnos   Tvrtko Ursulin
      • [PATCH v4 2/9] dma-fence: Use a flag for 64-bit seqnos   Christian König
    • [PATCH v4 2/9] dma-fence: Use a flag for 64-bit seqnos   Maxime Ripard
      • [PATCH v4 2/9] dma-fence: Use a flag for 64-bit seqnos   Tvrtko Ursulin
      • [PATCH v4 2/9] dma-fence: Use a flag for 64-bit seqnos   Christian König
      • [PATCH v4 2/9] dma-fence: Use a flag for 64-bit seqnos   Tvrtko Ursulin
      • [PATCH v4 2/9] dma-fence: Use a flag for 64-bit seqnos   Christian König
• i915 utils: range_overflows*()   Jani Nikula
  • i915 utils: range_overflows*()   Kees Cook
    • [RFC] drm/i915/utils: document range_overflows*() macros   Jani Nikula
    • ✗ Fi.CI.CHECKPATCH: warning for drm/i915/utils: document range_overflows*() macros   Patchwork
    • ✗ Fi.CI.SPARSE: warning for drm/i915/utils: document range_overflows*() macros   Patchwork
    • ✓ i915.CI.BAT: success for drm/i915/utils: document range_overflows*() macros   Patchwork
    • ✗ i915.CI.Full: failure for drm/i915/utils: document range_overflows*() macros   Patchwork
• [REGRESSSION] on linux-next (next-20250509)   Borah, Chaitanya Kumar
• [PATCH] drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled   Nathan Chancellor
• [PATCH] drm/i915/display: Fix u32 overflow in SNPS PHY HDMI PLL setup   Nautiyal, Ankit K
  • [PATCH] drm/i915/display: Fix u32 overflow in SNPS PHY HDMI PLL setup   Nautiyal, Ankit K
• [PATCH v11 08/10] drm/xe/nvm: add on-die non-volatile memory device   Usyskin, Alexander
• [PATCH V8 32/43] drm/colorop: Add 1D Curve Custom LUT type   Shankar, Uma
  • [PATCH V8 32/43] drm/colorop: Add 1D Curve Custom LUT type   Pekka Paalanen
    • [PATCH V8 32/43] drm/colorop: Add 1D Curve Custom LUT type   Harry Wentland
      • [PATCH V8 32/43] drm/colorop: Add 1D Curve Custom LUT type   Shankar, Uma
      • [PATCH V8 32/43] drm/colorop: Add 1D Curve Custom LUT type   Pekka Paalanen
• [PATCH v13 0/9] ref_tracker: add ability to register a debugfs file for a ref_tracker_dir   Jeff Layton
  • [PATCH v13 3/9] ref_tracker: have callers pass output function to pr_ostream()   Jeff Layton
  • [PATCH v13 4/9] ref_tracker: add a static classname string to each ref_tracker_dir   Jeff Layton
  • [PATCH v13 5/9] ref_tracker: allow pr_ostream() to print directly to a seq_file   Jeff Layton
  • [PATCH v13 6/9] ref_tracker: automatically register a file in debugfs for a ref_tracker_dir   Jeff Layton
  • [PATCH v13 7/9] ref_tracker: add a way to create a symlink to the ref_tracker_dir debugfs file   Jeff Layton
  • [PATCH v13 8/9] net: add symlinks to ref_tracker_dir for netns   Jeff Layton
  • [PATCH v13 9/9] ref_tracker: eliminate the ref_tracker_dir name field   Jeff Layton
  • ✗ Fi.CI.CHECKPATCH: warning for ref_tracker: add ability to register a debugfs file for a ref_tracker_dir (rev9)   Patchwork
  • ✗ Fi.CI.SPARSE: warning for ref_tracker: add ability to register a debugfs file for a ref_tracker_dir (rev9)   Patchwork
  • ✗ i915.CI.BAT: failure for ref_tracker: add ability to register a debugfs file for a ref_tracker_dir (rev9)   Patchwork
    • ✗ i915.CI.BAT: failure for ref_tracker: add ability to register a debugfs file for a ref_tracker_dir (rev9)   Jeff Layton
  • [PATCH v13 0/9] ref_tracker: add ability to register a debugfs file for a ref_tracker_dir   Jakub Kicinski
    • [PATCH v13 0/9] ref_tracker: add ability to register a debugfs file for a ref_tracker_dir   Andrew Morton
    • [PATCH v13 0/9] ref_tracker: add ability to register a debugfs file for a ref_tracker_dir   Jeff Layton
• [PATCH v13 1/9] ref_tracker: don't use %pK in pr_ostream() output   Jeff Layton
• [PATCH v13 2/9] ref_tracker: add a top level debugfs directory for ref_tracker   Jeff Layton
• [PATCH v12 00/10] mtd: add driver for Intel discrete graphics   Alexander Usyskin
  • [PATCH v12 01/10] mtd: add driver for intel graphics non-volatile memory device   Alexander Usyskin
  • [PATCH v12 02/10] mtd: intel-dg: implement region enumeration   Alexander Usyskin
  • [PATCH v12 03/10] mtd: intel-dg: implement access functions   Alexander Usyskin
  • [PATCH v12 04/10] mtd: intel-dg: register with mtd   Alexander Usyskin
  • [PATCH v12 05/10] mtd: intel-dg: align 64bit read and write   Alexander Usyskin
  • [PATCH v12 06/10] drm/i915/nvm: add nvm device for discrete graphics   Alexander Usyskin
  • [PATCH v12 07/10] drm/i915/nvm: add support for access mode   Alexander Usyskin
  • [PATCH v12 08/10] drm/xe/nvm: add on-die non-volatile memory device   Alexander Usyskin
  • [PATCH v12 09/10] drm/xe/nvm: add support for access mode   Alexander Usyskin
  • [PATCH v12 10/10] drm/xe/nvm: add support for non-posted erase   Alexander Usyskin
  • ✗ Fi.CI.CHECKPATCH: warning for mtd: add driver for Intel discrete graphics (rev13)   Patchwork
  • ✗ Fi.CI.SPARSE: warning for mtd: add driver for Intel discrete graphics (rev13)   Patchwork
  • ✓ i915.CI.BAT: success for mtd: add driver for Intel discrete graphics (rev13)   Patchwork
  • ✓ i915.CI.Full: success for mtd: add driver for Intel discrete graphics (rev13)   Patchwork
• [PATCH 0/4] drm/dp: Limit the DPCD probe quirk to the affected monitor   Imre Deak
  • [PATCH 1/4] drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS   Imre Deak
    • [PATCH 1/4] drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS   Jani Nikula
  • [PATCH 2/4] drm/edid: Add support for quirks visible to DRM core and drivers   Imre Deak
    • [PATCH v2 2/4] drm/edid: Add support for quirks visible to DRM core and drivers   Imre Deak
      • [PATCH v2 2/4] drm/edid: Add support for quirks visible to DRM core and drivers   Jani Nikula
      • [PATCH v2 2/4] drm/edid: Add support for quirks visible to DRM core and drivers   Imre Deak
  • [PATCH 3/4] drm/dp: Add an EDID quirk for the DPCD register access probe   Imre Deak
    • [PATCH v2 3/4] drm/dp: Add an EDID quirk for the DPCD register access probe   Imre Deak
      • [PATCH v2 3/4] drm/dp: Add an EDID quirk for the DPCD register access probe   Jani Nikula
      • [PATCH v2 3/4] drm/dp: Add an EDID quirk for the DPCD register access probe   Imre Deak
  • [PATCH 4/4] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required   Imre Deak
    • [PATCH 4/4] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required   Jani Nikula
  • ✗ Fi.CI.CHECKPATCH: warning for drm/dp: Limit the DPCD probe quirk to the affected monitor   Patchwork
  • ✗ Fi.CI.SPARSE: warning for drm/dp: Limit the DPCD probe quirk to the affected monitor   Patchwork
  • ✗ i915.CI.BAT: failure for drm/dp: Limit the DPCD probe quirk to the affected monitor   Patchwork
  • ✗ Fi.CI.CHECKPATCH: warning for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev2)   Patchwork
  • ✗ Fi.CI.SPARSE: warning for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev2)   Patchwork
  • ✓ i915.CI.BAT: success for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev2)   Patchwork
  • ✓ i915.CI.Full: success for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev2)   Patchwork
  • ✗ Fi.CI.CHECKPATCH: warning for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev3)   Patchwork
  • ✗ Fi.CI.SPARSE: warning for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev3)   Patchwork
  • ✗ i915.CI.BAT: failure for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev3)   Patchwork
• [PATCH v3 00/12] drm/i915/flipq: Rough flip queue implementation   Ville Syrjala
  • [PATCH v3 01/12] drm/i915/dsb: Use intel_dsb_ins_align() in intel_dsb_align_tail()   Ville Syrjala
  • [PATCH v3 02/12] drm/i915/dsb: Provide intel_dsb_head() and intel_dsb_size()   Ville Syrjala
  • [PATCH v3 03/12] drm/i915/dsb: Introduce intel_dsb_exec_time_us()   Ville Syrjala
    • [PATCH v3 03/12] drm/i915/dsb: Introduce intel_dsb_exec_time_us()   Jani Nikula
  • [PATCH v3 04/12] drm/i915: Set PKG_C_LATENCY.added_wake_time to 0   Ville Syrjala
  • [PATCH v3 05/12] drm/i915: Try to program PKG_C_LATENCY more correctly   Ville Syrjala
  • [PATCH v3 06/12] drm/i915/dmc: Define flip queue related PIPEDMC registers   Ville Syrjala
  • [PATCH v3 07/12] drm/i915/flipq: Provide the nuts and bolts code for flip queue   Ville Syrjala
  • [PATCH v3 08/12] drm/i915/flipq: Implement flip queue based commit path   Ville Syrjala
  • [PATCH v3 09/12] drm/i915/flipq: Implement Wa_18034343758   Ville Syrjala
  • [PATCH v3 10/12] drm/i915/flipq: Implement Wa_16018781658 for LNL-A0   Ville Syrjala
  • [PATCH v3 11/12] drm/i915/flipq: Add intel_flipq_dump()   Ville Syrjala
  • [PATCH v3 12/12] drm/i915/flipq: Enable flipq by default for testing   Ville Syrjala
  • ✗ Fi.CI.BUILD: warning for drm/i915/flipq: Rough flip queue implementation (rev7)   Patchwork
  • ✗ Fi.CI.CHECKPATCH: warning for drm/i915/flipq: Rough flip queue implementation (rev7)   Patchwork
  • ✗ Fi.CI.SPARSE: warning for drm/i915/flipq: Rough flip queue implementation (rev7)   Patchwork
  • ✗ Fi.CI.DOCS: warning for drm/i915/flipq: Rough flip queue implementation (rev7)   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915/flipq: Rough flip queue implementation (rev7)   Patchwork
  • ✓ i915.CI.Full: success for drm/i915/flipq: Rough flip queue implementation (rev7)   Patchwork
• [PATCH v6 00/17] Enable/Disable DC balance along with VRR DSB   Mitul Golani
  • [PATCH v6 01/17] drm/i915/vrr: Refactor vmin/vmax stuff   Mitul Golani
  • [PATCH v6 02/17] drm/i915/display: Add source param for dc balance   Mitul Golani
  • [PATCH v6 03/17] drm/i915/display: Add pipe dmc registers and bits for DC Balance   Mitul Golani
  • [PATCH v6 04/17] drm/i915/display: Add VRR DC balance registers   Mitul Golani
    • [PATCH v6 04/17] drm/i915/display: Add VRR DC balance registers   Nautiyal, Ankit K
  • [PATCH v6 05/17] drm/i915/vrr: Add functions to read out vmin/vmax stuff   Mitul Golani
  • [PATCH v6 06/17] drm/i915/vrr: Add DC Balance params to crtc_state   Mitul Golani
  • [PATCH v6 07/17] drm/i915/vrr: Add state dump for DC Balance params   Mitul Golani
  • [PATCH v6 08/17] drm/i915/vrr: Add compute config for DC Balance params   Mitul Golani
  • [PATCH v6 09/17] drm/i915/vrr: Write DC balance params to hw registers   Mitul Golani
  • [PATCH v6 10/17] drm/i915: Extract vrr_vblank_start()   Mitul Golani
  • [PATCH v6 11/17] drm/i915/vrr: Implement vblank evasion with DC balancing   Mitul Golani
  • [PATCH v6 12/17] drm/i915/dsb: Add pipedmc dc balance enable/disable   Mitul Golani
  • [PATCH v6 13/17] drm/i915/vrr: Restructure VRR enablement bit   Mitul Golani
  • [PATCH v6 14/17] drm/i915/vrr: Pause DC Balancing for DSB commits   Mitul Golani
  • [PATCH v6 15/17] drm/i915/vrr: Add function to check if DC Balance Possible   Mitul Golani
  • [PATCH v6 16/17] drm/i915/display: Add function to configure PIPEDMC_EVT_CTL   Mitul Golani
    • [PATCH v6 16/17] drm/i915/display: Add function to configure PIPEDMC_EVT_CTL   Nautiyal, Ankit K
  • [PATCH v6 17/17] drm/i915/vrr: Enable DC Balance bit   Mitul Golani
  • ✗ Fi.CI.CHECKPATCH: warning for Enable/Disable DC balance along with VRR DSB (rev6)   Patchwork
  • ✗ Fi.CI.SPARSE: warning for Enable/Disable DC balance along with VRR DSB (rev6)   Patchwork
  • ✗ i915.CI.BAT: failure for Enable/Disable DC balance along with VRR DSB (rev6)   Patchwork
• [BUG] i915 WARN: RPM wakelock not held in fwtable_read32 on Lenovo T14   Damian Tometzki
  • [BUG] i915 WARN: RPM wakelock not held in fwtable_read32 on Lenovo T14   Sebastian Brzezinka
• [PATCH] drm/i915/display: Implement wa_16011342517   Garg, Nemesa
  • [PATCH] drm/i915/display: Implement wa_16011342517   Garg, Nemesa
  • [PATCH] drm/i915/display: Implement wa_16011342517   Nemesa Garg
    • ✓ i915.CI.BAT: success for drm/i915/display: Implement wa_16011342517 (rev4)   Patchwork
    • ✗ i915.CI.Full: failure for drm/i915/display: Implement wa_16011342517 (rev4)   Patchwork
    • ✓ i915.CI.Full: success for drm/i915/display: Implement wa_16011342517 (rev4)   Patchwork
• [PATCH v12 03/10] ref_tracker: add a top level debugfs directory for ref_tracker   Jani Nikula
  • [PATCH v12 03/10] ref_tracker: add a top level debugfs directory for ref_tracker   Jeff Layton
• [PATCH v3] drm/i915: split out display register macros to a separate file   Jani Nikula
  • ✗ Fi.CI.CHECKPATCH: warning for drm/i915: split out display register macros to a separate file   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915: split out display register macros to a separate file   Patchwork
  • ✓ i915.CI.Full: success for drm/i915: split out display register macros to a separate file   Patchwork
  • [PATCH v3] drm/i915: split out display register macros to a separate file   Jani Nikula
  • [PATCH v3] drm/i915: split out display register macros to a separate file   Lucas De Marchi
    • [PATCH v3] drm/i915: split out display register macros to a separate file   Jani Nikula
• [PATCH 1/2] drm/i915/dkl: return if tc_port is invalid in dkl_phy_set_hip_idx()   Kahola, Mika
• ✗ i915.CI.Full: failure for drm/i915: small fixes from code reviews (rev2)   Luca Coelho
• [PATCH 0/8] drm/i915/sbi: move under display, cleanup   Luca Coelho
  • [PATCH 0/8] drm/i915/sbi: move under display, cleanup   Jani Nikula
• [RESEND 1/6] drm/i915/bw: pass struct dram_info pointer around   Govindapillai, Vinod
  • [RESEND 1/6] drm/i915/bw: pass struct dram_info pointer around   Jani Nikula
• [RESEND 2/6] drm/i915/dram: add accessor for struct dram_info and use it   Govindapillai, Vinod
• [RESEND 3/6] drm/i915/wm: DG2 doesn't have dram info to look up wm_lv_0_adjust_needed   Govindapillai, Vinod
  • [RESEND 3/6] drm/i915/wm: DG2 doesn't have dram info to look up wm_lv_0_adjust_needed   Govindapillai, Vinod
  • [RESEND 3/6] drm/i915/wm: DG2 doesn't have dram info to look up wm_lv_0_adjust_needed   Jani Nikula
• [RESEND 4/6] drm/i915/dram: pass struct dram_info pointer around   Govindapillai, Vinod
• [RESEND 5/6] drm/i915/dram: add return value and handling to intel_dram_detect()   Govindapillai, Vinod
• [RESEND 6/6] drm/i915/dram: allocate struct dram_info dynamically   Govindapillai, Vinod
• [PATCH] drm/i915/display: Fix macro HAS_ULTRAJOINER   Ankit Nautiyal
  • ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: Fix macro HAS_ULTRAJOINER   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915/display: Fix macro HAS_ULTRAJOINER   Patchwork
  • ✓ i915.CI.Full: success for drm/i915/display: Fix macro HAS_ULTRAJOINER   Patchwork
  • [PATCH] drm/i915/display: Fix macro HAS_ULTRAJOINER   Jani Nikula
  • [PATCH] drm/i915/display: Fix macro HAS_ULTRAJOINER   Ankit Nautiyal
    • ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: Fix macro HAS_ULTRAJOINER (rev2)   Patchwork
    • ✓ i915.CI.BAT: success for drm/i915/display: Fix macro HAS_ULTRAJOINER (rev2)   Patchwork
    • ✗ i915.CI.Full: failure for drm/i915/display: Fix macro HAS_ULTRAJOINER (rev2)   Patchwork
    • ✓ i915.CI.Full: success for drm/i915/display: Fix macro HAS_ULTRAJOINER (rev2)   Patchwork
    • [PATCH] drm/i915/display: Fix macro HAS_ULTRAJOINER   Karthik B S
• [PATCH v3 0/5] drm/dp: Limit the DPCD probe quirk to the affected monitor   Imre Deak
  • [PATCH v3 1/5] drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS   Imre Deak
  • [PATCH v3 2/5] drm/edid: Define the quirks in an enum list   Imre Deak
    • [PATCH v3 2/5] drm/edid: Define the quirks in an enum list   Jani Nikula
    • [PATCH v3 2/5] drm/edid: Define the quirks in an enum list   Jani Nikula
  • [PATCH v3 3/5] drm/edid: Add support for quirks visible to DRM core and drivers   Imre Deak
    • [PATCH v3 3/5] drm/edid: Add support for quirks visible to DRM core and drivers   Jani Nikula
      • [PATCH v3 3/5] drm/edid: Add support for quirks visible to DRM core and drivers   Imre Deak
  • [PATCH v3 4/5] drm/dp: Add an EDID quirk for the DPCD register access probe   Imre Deak
    • [PATCH v3 4/5] drm/dp: Add an EDID quirk for the DPCD register access probe   Jani Nikula
      • [PATCH v3 4/5] drm/dp: Add an EDID quirk for the DPCD register access probe   Imre Deak
    • [PATCH v4 4/5] drm/dp: Add an EDID quirk for the DPCD register access probe   Imre Deak
  • [PATCH v3 5/5] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required   Imre Deak
    • [PATCH v3 5/5] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required   Jani Nikula
    • [PATCH v3 5/5] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required   Jani Nikula
      • [PATCH v3 5/5] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required   Imre Deak
      • [PATCH v3 5/5] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required   Imre Deak
      • [PATCH v3 5/5] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required   Jani Nikula
      • [PATCH v3 5/5] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required   Imre Deak
    • [PATCH v4 5/5] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required   Imre Deak
      • [PATCH v4 5/5] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required   Kahola, Mika
      • [PATCH v4 5/5] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required   Jani Nikula
  • ✗ Fi.CI.CHECKPATCH: warning for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev4)   Patchwork
  • ✗ Fi.CI.SPARSE: warning for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev4)   Patchwork
  • ✓ i915.CI.BAT: success for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev4)   Patchwork
  • ✗ i915.CI.Full: failure for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev4)   Patchwork
  • ✗ Fi.CI.CHECKPATCH: warning for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev6)   Patchwork
  • ✗ Fi.CI.SPARSE: warning for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev6)   Patchwork
  • ✓ i915.CI.BAT: success for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev6)   Patchwork
  • ✗ i915.CI.Full: failure for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev6)   Patchwork
  • [PATCH v3 0/5] drm/dp: Limit the DPCD probe quirk to the affected monitor   Imre Deak
    • [PATCH v3 0/5] drm/dp: Limit the DPCD probe quirk to the affected monitor   Imre Deak
      • [PATCH v3 0/5] drm/dp: Limit the DPCD probe quirk to the affected monitor   Thomas Zimmermann
      • [PATCH v3 0/5] drm/dp: Limit the DPCD probe quirk to the affected monitor   Imre Deak
• [PULL] drm-intel-next-fixes   Joonas Lahtinen
• [PATCH v2 0/1] drm/i915/display: Add no_psr_reason to PSR debugfs   Michał Grzelak
  • [PATCH v2 1/1] drm/i915/display: Add no_psr_reason to PSR debugfs   Michał Grzelak
    • [PATCH v2 1/1] drm/i915/display: Add no_psr_reason to PSR debugfs   Kahola, Mika
  • ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: Add no_psr_reason to PSR debugfs (rev2)   Patchwork
• [PATCH 0/6] drm/i915, drm/xe: add drm device based pcode interface for display   Jani Nikula
  • [PATCH 1/6] drm/i915/pcode: drop fast wait from snb_pcode_write_timeout()   Jani Nikula
    • [PATCH 1/6] drm/i915/pcode: drop fast wait from snb_pcode_write_timeout()   Rodrigo Vivi
    • [PATCH 1/6] drm/i915/pcode: drop fast wait from snb_pcode_write_timeout()   Rodrigo Vivi
    • [PATCH 1/6] drm/i915/pcode: drop fast wait from snb_pcode_write_timeout()   Rodrigo Vivi
  • [PATCH 2/6] drm/i915/pcode: add struct drm_device based interface   Jani Nikula
    • [PATCH 2/6] drm/i915/pcode: add struct drm_device based interface   Rodrigo Vivi
  • [PATCH 3/6] drm/xe/pcode: add struct drm_device based interface   Jani Nikula
    • [PATCH 3/6] drm/xe/pcode: add struct drm_device based interface   Rodrigo Vivi
  • [PATCH 4/6] drm/i915/display: switch to struct drm_device based pcode interface   Jani Nikula
    • [PATCH 4/6] drm/i915/display: switch to struct drm_device based pcode interface   Rodrigo Vivi
      • [PATCH 4/6] drm/i915/display: switch to struct drm_device based pcode interface   Jani Nikula
      • [PATCH 4/6] drm/i915/display: switch to struct drm_device based pcode interface   Rodrigo Vivi
  • [PATCH 5/6] drm/i915/dram: switch to struct drm_device based pcode interface   Jani Nikula
    • [PATCH 5/6] drm/i915/dram: switch to struct drm_device based pcode interface   Rodrigo Vivi
  • [PATCH 6/6] drm/xe/compat: remove old pcode compat interface   Jani Nikula
    • [PATCH 6/6] drm/xe/compat: remove old pcode compat interface   Rodrigo Vivi
  • ✗ Fi.CI.SPARSE: warning for drm/i915, drm/xe: add drm device based pcode interface for display   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915, drm/xe: add drm device based pcode interface for display   Patchwork
    • ✓ i915.CI.BAT: success for drm/i915, drm/xe: add drm device based pcode interface for display   Jani Nikula
  • ✗ Fi.CI.BUILD: failure for drm/i915, drm/xe: add drm device based pcode interface for display (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/guc: Handle race condition where wakeref count drops below 0 (rev4)   Patchwork
• [PATCH v3] drm/i915/display: Implement wa_16011342517   Nemesa Garg
  • ✓ i915.CI.BAT: success for drm/i915/display: Implement wa_16011342517 (rev3)   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/display: Implement wa_16011342517 (rev3)   Patchwork
  • [PATCH v3] drm/i915/display: Implement wa_16011342517   Kandpal, Suraj
• ✗ i915.CI.BAT: failure for drm/i915/guc: Handle race condition where wakeref count drops below 0 (rev4)   Patchwork
• [PULL] drm-misc-next-fixes   Maarten Lankhorst
• [PULL] drm-xe-next-fixes   Thomas Hellstrom
• linux-next: manual merge of the drm-misc-fixes tree with Linus' tree   Stephen Rothwell
• [PULL] drm-misc-fixes   Thomas Zimmermann
  • [PULL] drm-misc-fixes   Simona Vetter
  • [PULL] drm-misc-fixes   Simona Vetter
  • [PULL] drm-misc-fixes   Maarten Lankhorst
  • [PULL] drm-misc-fixes   Maarten Lankhorst
  • [PULL] drm-misc-fixes   Maarten Lankhorst
• ✗ Fi.CI.SPARSE: warning for drm/i915/guc: Handle race condition where wakeref count drops below 0 (rev5)   Patchwork
• ✓ i915.CI.BAT: success for drm/i915/guc: Handle race condition where wakeref count drops below 0 (rev5)   Patchwork
• [PATCH] drm/i915/selftests: Fix error pointer vs NULL in __mock_request_alloc()   Dan Carpenter
  • ✓ i915.CI.BAT: success for drm/i915/selftests: Fix error pointer vs NULL in __mock_request_alloc()   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/selftests: Fix error pointer vs NULL in __mock_request_alloc()   Patchwork
  • [PATCH] drm/i915/selftests: Fix error pointer vs NULL in __mock_request_alloc()   Rodrigo Vivi
    • [PATCH] drm/i915/selftests: Fix error pointer vs NULL in __mock_request_alloc()   Dan Carpenter
• [PATCH 0/4] drm/panel, drm/i915: ACPI support for panel follower   Jani Nikula
  • [PATCH 1/4] drm/panel: use fwnode based lookups for panel followers   Jani Nikula
    • [PATCH 1/4] drm/panel: use fwnode based lookups for panel followers   Lee, Shawn C
    • [PATCH 1/4] drm/panel: use fwnode based lookups for panel followers   Doug Anderson
      • [PATCH 1/4] drm/panel: use fwnode based lookups for panel followers   Jani Nikula
    • [PATCH 1/4] drm/panel: use fwnode based lookups for panel followers   Murthy, Arun R
    • [PATCH v2] drm/panel: use fwnode based lookups for panel followers   Jani Nikula
    • [PATCH 1/4] drm/panel: use fwnode based lookups for panel followers   Maxime Ripard
  • [PATCH 2/4] drm/i915/panel: add panel register/unregister   Jani Nikula
    • [PATCH 2/4] drm/i915/panel: add panel register/unregister   Lee, Shawn C
    • [PATCH 2/4] drm/i915/panel: add panel register/unregister   Murthy, Arun R
      • [PATCH 2/4] drm/i915/panel: add panel register/unregister   Jani Nikula
    • [PATCH 2/4] drm/i915/panel: add panel register/unregister   Maxime Ripard
  • [PATCH 3/4] drm/i915/panel: register drm_panel and call prepare/unprepare for ICL+ DSI   Jani Nikula
    • [PATCH 3/4] drm/i915/panel: register drm_panel and call prepare/unprepare for ICL+ DSI   Lee, Shawn C
    • [PATCH 3/4] drm/i915/panel: register drm_panel and call prepare/unprepare for ICL+ DSI   Murthy, Arun R
      • [PATCH 3/4] drm/i915/panel: register drm_panel and call prepare/unprepare for ICL+ DSI   Jani Nikula
    • [PATCH 3/4] drm/i915/panel: register drm_panel and call prepare/unprepare for ICL+ DSI   Maxime Ripard
  • [PATCH 4/4] drm/i915/panel: sync panel prepared state at register   Jani Nikula
    • [PATCH 4/4] drm/i915/panel: sync panel prepared state at register   Lee, Shawn C
    • [PATCH 4/4] drm/i915/panel: sync panel prepared state at register   Murthy, Arun R
    • [PATCH 4/4] drm/i915/panel: sync panel prepared state at register   Maxime Ripard
  • ✗ Fi.CI.SPARSE: warning for drm/panel, drm/i915: ACPI support for panel follower   Patchwork
  • ✓ i915.CI.BAT: success for drm/panel, drm/i915: ACPI support for panel follower   Patchwork
  • ✓ i915.CI.Full: success for drm/panel, drm/i915: ACPI support for panel follower   Patchwork
  • ✓ i915.CI.BAT: success for drm/panel, drm/i915: ACPI support for panel follower (rev2)   Patchwork
  • ✓ i915.CI.Full: success for drm/panel, drm/i915: ACPI support for panel follower (rev2)   Patchwork
  • [PATCH 0/4] drm/panel, drm/i915: ACPI support for panel follower   Jani Nikula
• [PATCH v4] drm/i915: split out display register macros to a separate file   Jani Nikula
  • ✗ Fi.CI.BUILD: warning for drm/i915: split out display register macros to a separate file (rev2)   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915: split out display register macros to a separate file (rev2)   Patchwork
  • [PATCH v4] drm/i915: split out display register macros to a separate file   Lucas De Marchi
    • [PATCH v4] drm/i915: split out display register macros to a separate file   Jani Nikula
  • ✗ i915.CI.Full: failure for drm/i915: split out display register macros to a separate file (rev2)   Patchwork
• ✗ i915.CI.Full: failure for drm/i915/guc: Handle race condition where wakeref count drops below 0 (rev5)   Patchwork
• [PATCH v8 0/9] drm/i915: Add drm_panic support   Jocelyn Falempe
  • [PATCH v8 1/9] drm/i915/fbdev: Add intel_fbdev_get_map()   Jocelyn Falempe
  • [PATCH v8 2/9] drm/i915/display/i9xx: Add a disable_tiling() for i9xx planes   Jocelyn Falempe
  • [PATCH v8 3/9] drm/i915/display: Add a disable_tiling() for skl planes   Jocelyn Falempe
  • [PATCH v8 4/9] drm/ttm: Add ttm_bo_kmap_try_from_panic()   Jocelyn Falempe
    • [PATCH v8 4/9] drm/ttm: Add ttm_bo_kmap_try_from_panic()   Christian König
      • [PATCH v8 4/9] drm/ttm: Add ttm_bo_kmap_try_from_panic()   Jocelyn Falempe
      • [PATCH v8 4/9] drm/ttm: Add ttm_bo_kmap_try_from_panic()   Christian König
    • [PATCH v8 4/9] drm/ttm: Add ttm_bo_kmap_try_from_panic()   kernel test robot
  • [PATCH v8 5/9] drm/i915: Add intel_bo_panic_setup and intel_bo_panic_finish   Jocelyn Falempe
    • [PATCH v8 5/9] drm/i915: Add intel_bo_panic_setup and intel_bo_panic_finish   Jani Nikula
  • [PATCH v8 6/9] drm/i915/display: Add drm_panic support   Jocelyn Falempe
  • [PATCH v8 7/9] drm/i915/display: Add drm_panic support for Y-tiling with DPT   Jocelyn Falempe
  • [PATCH v8 8/9] drm/i915/display: Add drm_panic support for 4-tiling with DPT   Jocelyn Falempe
  • [PATCH v8 9/9] drm/i915/psr: Add intel_psr2_panic_force_full_update   Jocelyn Falempe
  • ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Add drm_panic support (rev8)   Patchwork
  • ✗ Fi.CI.SPARSE: warning for drm/i915: Add drm_panic support (rev8)   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915: Add drm_panic support (rev8)   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915: Add drm_panic support (rev8)   Patchwork
• History repeats: Redhat censored me on freedesktop.org - Xlibre fork release coming in few days   Enrico Weigelt, metux IT consult
• [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Janusz Krzysztofik
  • ✗ Fi.CI.CHECKPATCH: warning for drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Patchwork
  • ✓ i915.CI.Full: success for drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Patchwork
  • [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Sebastian Brzezinka
  • [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Krzysztof Niemiec
  • [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Krzysztof Karas
  • [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Janusz Krzysztofik
    • ✗ Fi.CI.CHECKPATCH: warning for drm/i915/ring_submission: Fix timeline left held on VMA alloc error (rev2)   Patchwork
    • ✓ i915.CI.BAT: success for drm/i915/ring_submission: Fix timeline left held on VMA alloc error (rev2)   Patchwork
    • ✓ i915.CI.Full: success for drm/i915/ring_submission: Fix timeline left held on VMA alloc error (rev2)   Patchwork
    • [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Gote, Nitin R
      • [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Andi Shyti
      • [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Janusz Krzysztofik
      • [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Jani Nikula
      • [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Janusz Krzysztofik
      • [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Andi Shyti
      • [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Janusz Krzysztofik
    • [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Andi Shyti
    • [PATCH] drm/i915/ring_submission: Fix timeline left held on VMA alloc error   Andi Shyti
• [PATCH v6 01/11] mtd: core: always create master device   Guenter Roeck
  • [PATCH v6 01/11] mtd: core: always create master device   Usyskin, Alexander
    • [PATCH v6 01/11] mtd: core: always create master device   Miquel Raynal
      • [PATCH v6 01/11] mtd: core: always create master device   Guenter Roeck
      • [PATCH v6 01/11] mtd: core: always create master device   Miquel Raynal
      • [PATCH v6 01/11] mtd: core: always create master device   Usyskin, Alexander
      • [PATCH v6 01/11] mtd: core: always create master device   Guenter Roeck
      • [PATCH v6 01/11] mtd: core: always create master device   Usyskin, Alexander
      • [PATCH v6 01/11] mtd: core: always create master device   Guenter Roeck
      • [PATCH v6 01/11] mtd: core: always create master device   Richard Weinberger
      • [PATCH v6 01/11] mtd: core: always create master device   Usyskin, Alexander
      • [PATCH v6 01/11] mtd: core: always create master device   Richard Weinberger
      • [PATCH v6 01/11] mtd: core: always create master device   Guenter Roeck
      • [PATCH v6 01/11] mtd: core: always create master device   Miquel Raynal
      • [PATCH v6 01/11] mtd: core: always create master device   Richard Weinberger
      • [PATCH v6 01/11] mtd: core: always create master device   Usyskin, Alexander
      • [PATCH v6 01/11] mtd: core: always create master device   Miquel Raynal
      • [PATCH v6 01/11] mtd: core: always create master device   Usyskin, Alexander
      • [PATCH v6 01/11] mtd: core: always create master device   Richard Weinberger
      • [PATCH v6 01/11] mtd: core: always create master device   Usyskin, Alexander
• [PATCH v2 0/3] bits: Split asm and non-asm GENMASK*() and unify definitions   Vincent Mailhol via B4 Relay
  • [PATCH v2 1/3] bits: split the definition of the asm and non-asm GENMASK*()   Vincent Mailhol via B4 Relay
  • [PATCH v2 3/3] test_bits: add tests for __GENMASK() and __GENMASK_ULL()   Vincent Mailhol via B4 Relay
  • ✗ Fi.CI.BUILD: failure for bits: Split asm and non-asm GENMASK*() and unify definitions (rev2)   Patchwork
  • [PATCH v2 0/3] bits: Split asm and non-asm GENMASK*() and unify definitions   Vincent Mailhol
    • [PATCH v2 0/3] bits: Split asm and non-asm GENMASK*() and unify definitions   Yury Norov
• [PATCH v2 2/3] bits: unify the non-asm GENMASK*()   Vincent Mailhol via B4 Relay
• [PATCH v5 0/4] Fixing some dma-fence use-after-free   Tvrtko Ursulin
  • ✗ Fi.CI.CHECKPATCH: warning for Fixing some dma-fence use-after-free   Patchwork
  • ✗ Fi.CI.SPARSE: warning for Fixing some dma-fence use-after-free   Patchwork
  • ✓ i915.CI.BAT: success for Fixing some dma-fence use-after-free   Patchwork
  • ✗ i915.CI.Full: failure for Fixing some dma-fence use-after-free   Patchwork
• [PATCH v5 1/4] dma-fence: Add safe access helpers and document the rules   Tvrtko Ursulin
  • [PATCH v5 1/4] dma-fence: Add safe access helpers and document the rules   Christian König
• [PATCH v5 2/4] sync_file: Protect access to driver and timeline name   Tvrtko Ursulin
• [PATCH v5 3/4] drm/i915: Protect access to driver and timeline name   Tvrtko Ursulin
• [PATCH v5 4/4] drm/xe: Make dma-fences compliant with the safe access rules   Tvrtko Ursulin
• [REGRESSION] on linux-next (next-20250509)   Borah, Chaitanya Kumar
  • [REGRESSION] on linux-next (next-20250509)   Luke Jones
    • [REGRESSION] on linux-next (next-20250509)   Borah, Chaitanya Kumar
• [PATCH 0/2] drm/i915/display: register include cleanups   Jani Nikula
  • [PATCH 1/2] drm/i915/display: include intel_display_reg_defs.h from display regs files   Jani Nikula
  • [PATCH 2/2] drm/i915/display: drop i915_reg.h include where possible   Jani Nikula
  • ✗ Fi.CI.SPARSE: warning for drm/i915/display: register include cleanups   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915/display: register include cleanups   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/display: register include cleanups   Patchwork
  • [PATCH 0/2] drm/i915/display: register include cleanups   Grzelak, Michal
    • [PATCH 0/2] drm/i915/display: register include cleanups   Jani Nikula
• [PATCH v4 00/21] drm/i915/flipq: Rough flip queue implementation   Ville Syrjala
  • [PATCH v4 01/21] drm/i915/dsb: Use intel_dsb_ins_align() in intel_dsb_align_tail()   Ville Syrjala
    • [PATCH v4 01/21] drm/i915/dsb: Use intel_dsb_ins_align() in intel_dsb_align_tail()   Shankar, Uma
  • [PATCH v4 02/21] drm/i915/dsb: Provide intel_dsb_head() and intel_dsb_size()   Ville Syrjala
    • [PATCH v4 02/21] drm/i915/dsb: Provide intel_dsb_head() and intel_dsb_size()   Shankar, Uma
  • [PATCH v4 03/21] drm/i915/dsb: Introduce intel_dsb_exec_time_us()   Ville Syrjala
    • [PATCH v4 03/21] drm/i915/dsb: Introduce intel_dsb_exec_time_us()   Shankar, Uma
  • [PATCH v4 04/21] drm/i915/dsb: Garbage collect the MMIO DEwake stuff   Ville Syrjala
    • [PATCH v4 04/21] drm/i915/dsb: Garbage collect the MMIO DEwake stuff   Shankar, Uma
  • [PATCH v4 05/21] drm/i915/dsb: Move the DSB_PMCTRL* reset out of intel_dsb_finish()   Ville Syrjala
    • [PATCH v4 05/21] drm/i915/dsb: Move the DSB_PMCTRL* reset out of intel_dsb_finish()   Shankar, Uma
  • [PATCH v4 06/21] drm/i915/dsb: Disable the GOSUB interrupt   Ville Syrjala
    • [PATCH v4 06/21] drm/i915/dsb: Disable the GOSUB interrupt   Shankar, Uma
  • [PATCH v4 07/21] drm/i915/dmc: Limit PIPEDMC clock gating w/a to just ADL/DG2/MTL   Ville Syrjala
    • [PATCH v4 07/21] drm/i915/dmc: Limit PIPEDMC clock gating w/a to just ADL/DG2/MTL   Shankar, Uma
      • [PATCH v4 07/21] drm/i915/dmc: Limit PIPEDMC clock gating w/a to just ADL/DG2/MTL   Ville Syrjälä
      • [PATCH v4 07/21] drm/i915/dmc: Limit PIPEDMC clock gating w/a to just ADL/DG2/MTL   Shankar, Uma
  • [PATCH v4 08/21] drm/i915/dmc: Parametrize MTL_PIPEDMC_GATING_DIS   Ville Syrjala
    • [PATCH v4 08/21] drm/i915/dmc: Parametrize MTL_PIPEDMC_GATING_DIS   Shankar, Uma
  • [PATCH v4 09/21] drm/i915: Set PKG_C_LATENCY.added_wake_time to 0   Ville Syrjala
    • [PATCH v4 09/21] drm/i915: Set PKG_C_LATENCY.added_wake_time to 0   Shankar, Uma
  • [PATCH v4 10/21] drm/i915: Try to program PKG_C_LATENCY more correctly   Ville Syrjala
  • [PATCH v4 11/21] drm/i915/dmc: Shuffle code around   Ville Syrjala
    • [PATCH v4 11/21] drm/i915/dmc: Shuffle code around   Shankar, Uma
  • [PATCH v4 12/21] drm/i915/dmc: Reload PIPEDMC MMIO registers for pipe C/D on PTL+   Ville Syrjala
    • [PATCH v4 12/21] drm/i915/dmc: Reload PIPEDMC MMIO registers for pipe C/D on PTL+   Shankar, Uma
      • [PATCH v4 12/21] drm/i915/dmc: Reload PIPEDMC MMIO registers for pipe C/D on PTL+   Ville Syrjälä
      • [PATCH v4 12/21] drm/i915/dmc: Reload PIPEDMC MMIO registers for pipe C/D on PTL+   Shankar, Uma
  • [PATCH v4 13/21] drm/i915/dmc: Assert DMC is loaded harder   Ville Syrjala
  • [PATCH v4 14/21] drm/i915/dmc: Define flip queue related PIPEDMC registers   Ville Syrjala
    • [PATCH v4 14/21] drm/i915/dmc: Define flip queue related PIPEDMC registers   Shankar, Uma
  • [PATCH v4 15/21] drm/i915/flipq: Provide the nuts and bolts code for flip queue   Ville Syrjala
    • [PATCH v4 15/21] drm/i915/flipq: Provide the nuts and bolts code for flip queue   Shankar, Uma
  • [PATCH v4 16/21] drm/i915/flipq: Implement flip queue based commit path   Ville Syrjala
    • [PATCH v4 16/21] drm/i915/flipq: Implement flip queue based commit path   Shankar, Uma
  • [PATCH v4 17/21] drm/i915/flipq: Implement Wa_18034343758   Ville Syrjala
    • [PATCH v4 17/21] drm/i915/flipq: Implement Wa_18034343758   Shankar, Uma
  • [PATCH v4 18/21] drm/i915/flipq: Implement Wa_16018781658 for LNL-A0   Ville Syrjala
    • [PATCH v4 18/21] drm/i915/flipq: Implement Wa_16018781658 for LNL-A0   Shankar, Uma
  • [PATCH v4 19/21] drm/i915/flipq: Add intel_flipq_dump()   Ville Syrjala
    • [PATCH v4 19/21] drm/i915/flipq: Add intel_flipq_dump()   Shankar, Uma
  • [PATCH v4 20/21] drm/i915/flipq: Enable flipq by default for testing   Ville Syrjala
  • [PATCH v4 21/21] drm/i915/flipq: Disable PSR for extra flip queue coverage   Ville Syrjala
  • ✗ Fi.CI.CHECKPATCH: warning for drm/i915/flipq: Rough flip queue implementation (rev8)   Patchwork
  • ✗ Fi.CI.SPARSE: warning for drm/i915/flipq: Rough flip queue implementation (rev8)   Patchwork
  • ✗ i915.CI.BAT: failure for drm/i915/flipq: Rough flip queue implementation (rev8)   Patchwork
• [PATCH] drm/i915/xe3lpd: Prune modes for YUV420   Suraj Kandpal
  • [PATCH] drm/i915/xe3lpd: Prune modes for YUV420   Cavitt, Jonathan
  • ✓ i915.CI.BAT: success for drm/i915/xe3lpd: Prune modes for YUV420   Patchwork
  • [PATCH] drm/i915/xe3lpd: Prune modes for YUV420   Ville Syrjälä
    • [PATCH] drm/i915/xe3lpd: Prune modes for YUV420   Kandpal, Suraj
  • ✗ i915.CI.Full: failure for drm/i915/xe3lpd: Prune modes for YUV420   Patchwork
  • [PATCH] drm/i915/xe3lpd: Prune modes for YUV420   Suraj Kandpal
    • [PATCH] drm/i915/xe3lpd: Prune modes for YUV420   Jani Nikula
      • [PATCH] drm/i915/xe3lpd: Prune modes for YUV420   Kandpal, Suraj
      • [PATCH] drm/i915/xe3lpd: Prune modes for YUV420   Kandpal, Suraj
    • ✓ i915.CI.BAT: success for drm/i915/xe3lpd: Prune modes for YUV420   Patchwork
    • ✗ i915.CI.Full: failure for drm/i915/xe3lpd: Prune modes for YUV420   Patchwork
  • [PATCH] drm/i915/xe3lpd: Prune modes for YUV420   Suraj Kandpal
    • ✓ i915.CI.BAT: success for drm/i915/xe3lpd: Prune modes for YUV420   Patchwork
    • ✗ i915.CI.Full: failure for drm/i915/xe3lpd: Prune modes for YUV420   Patchwork
• linux-next: semantic conflict between the drm-misc tree and Linus' tree   Stephen Rothwell
  • linux-next: semantic conflict between the drm-misc tree and Linus' tree   Lukas Wunner
    • linux-next: semantic conflict between the drm-misc tree and Linus' tree   Jeff Hugo
• [PATCH] drm/i915/dsb: Disable GOSUB interrupt   Chaitanya Kumar Borah
  • ✓ i915.CI.BAT: success for drm/i915/dsb: Disable GOSUB interrupt   Patchwork
  • ✓ i915.CI.Full: success for drm/i915/dsb: Disable GOSUB interrupt   Patchwork
• [PATCH 0/2] Add kernel param to limit the eDP rate to HBR2   Ankit Nautiyal
  • [PATCH 1/2] Revert "drm/i915/dp: Reject HBR3 when sink doesn't support TPS4"   Ankit Nautiyal
    • [PATCH 1/2] Revert "drm/i915/dp: Reject HBR3 when sink doesn't support TPS4"   Jani Nikula
  • [PATCH 2/2] drm/i915/dp: Add kernel param to limit eDP rate to HBR2"   Ankit Nautiyal
    • [PATCH 2/2] drm/i915/dp: Add kernel param to limit eDP rate to HBR2"   Jani Nikula
      • [PATCH 2/2] drm/i915/dp: Add kernel param to limit eDP rate to HBR2"   Nautiyal, Ankit K
      • [PATCH 2/2] drm/i915/dp: Add kernel param to limit eDP rate to HBR2"   Jani Nikula
  • ✓ i915.CI.BAT: success for Add kernel param to limit the eDP rate to HBR2   Patchwork
  • ✓ i915.CI.Full: success for Add kernel param to limit the eDP rate to HBR2   Patchwork
• [PATCH] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Krzysztof Karas
  • [PATCH] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Krzysztof Niemiec
    • [PATCH] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Krzysztof Karas
  • ✓ i915.CI.BAT: success for drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Patchwork
  • [PATCH] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Sebastian Brzezinka
    • [PATCH] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Krzysztof Karas
  • ✗ i915.CI.Full: failure for drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Patchwork
  • [PATCH] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Chris Wilson
  • [PATCH] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   kernel test robot
• [PATCH v14 0/9] ref_tracker: add ability to register a debugfs file for a ref_tracker_dir   Jeff Layton
  • [PATCH v14 1/9] ref_tracker: don't use %pK in pr_ostream() output   Jeff Layton
  • [PATCH v14 2/9] ref_tracker: add a top level debugfs directory for ref_tracker   Jeff Layton
  • [PATCH v14 3/9] ref_tracker: have callers pass output function to pr_ostream()   Jeff Layton
    • [PATCH v14 3/9] ref_tracker: have callers pass output function to pr_ostream()   Krzysztof Karas
  • [PATCH v14 4/9] ref_tracker: add a static classname string to each ref_tracker_dir   Jeff Layton
    • [PATCH v14 4/9] ref_tracker: add a static classname string to each ref_tracker_dir   Krzysztof Karas
  • [PATCH v14 5/9] ref_tracker: allow pr_ostream() to print directly to a seq_file   Jeff Layton
    • [PATCH v14 5/9] ref_tracker: allow pr_ostream() to print directly to a seq_file   Krzysztof Karas
  • [PATCH v14 6/9] ref_tracker: automatically register a file in debugfs for a ref_tracker_dir   Jeff Layton
    • [PATCH v14 6/9] ref_tracker: automatically register a file in debugfs for a ref_tracker_dir   kernel test robot
  • [PATCH v14 7/9] ref_tracker: add a way to create a symlink to the ref_tracker_dir debugfs file   Jeff Layton
  • [PATCH v14 8/9] net: add symlinks to ref_tracker_dir for netns   Jeff Layton
  • [PATCH v14 9/9] ref_tracker: eliminate the ref_tracker_dir name field   Jeff Layton
  • ✗ Fi.CI.CHECKPATCH: warning for ref_tracker: add ability to register a debugfs file for a ref_tracker_dir (rev10)   Patchwork
  • ✓ i915.CI.BAT: success for ref_tracker: add ability to register a debugfs file for a ref_tracker_dir (rev10)   Patchwork
  • ✓ i915.CI.Full: success for ref_tracker: add ability to register a debugfs file for a ref_tracker_dir (rev10)   Patchwork
  • [PATCH v14 0/9] ref_tracker: add ability to register a debugfs file for a ref_tracker_dir   Jakub Kicinski
• [PATCH v6 0/4] Fixing some dma-fence use-after-free   Tvrtko Ursulin
  • ✗ Fi.CI.CHECKPATCH: warning for Fixing some dma-fence use-after-free   Patchwork
  • ✓ i915.CI.BAT: success for Fixing some dma-fence use-after-free   Patchwork
  • ✗ i915.CI.Full: failure for Fixing some dma-fence use-after-free   Patchwork
• [PATCH v6 1/4] sync_file: Protect access to driver and timeline name   Tvrtko Ursulin
  • [PATCH v6 1/4] sync_file: Protect access to driver and timeline name   Christian König
• [PATCH v6 2/4] drm/i915: Protect access to driver and timeline name   Tvrtko Ursulin
• [PATCH v6 3/4] dma-fence: Add safe access helpers and document the rules   Tvrtko Ursulin
  • [PATCH v6 3/4] dma-fence: Add safe access helpers and document the rules   Christian König
    • [PATCH v6 3/4] dma-fence: Add safe access helpers and document the rules   Tvrtko Ursulin
• [PATCH v6 4/4] drm/xe: Make dma-fences compliant with the safe access rules   Tvrtko Ursulin
  • [PATCH v6 4/4] drm/xe: Make dma-fences compliant with the safe access rules   Lucas De Marchi
    • [PATCH v6 4/4] drm/xe: Make dma-fences compliant with the safe access rules   Tvrtko Ursulin
• linux-next: manual merge of the drm-misc tree with the drm-misc-fixes tree   Stephen Rothwell
  • linux-next: manual merge of the drm-misc tree with the drm-misc-fixes tree   Stephen Rothwell
• linux-next: build warnings after merge of the drm-misc tree   Stephen Rothwell
  • linux-next: build warnings after merge of the drm-misc tree   Stephen Rothwell
• [RFC] Async Flip in Atomic ioctl corrections   Murthy, Arun R
  • ✗ Fi.CI.BUILD: failure for Async Flip in Atomic ioctl corrections   Patchwork
• [PATCH v2] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Krzysztof Karas
  • ✓ i915.CI.BAT: success for drm/i915/selftests: Keep mock file open during unfaultable migrate with fill (rev2)   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/selftests: Keep mock file open during unfaultable migrate with fill (rev2)   Patchwork
    • ✗ i915.CI.Full: failure for drm/i915/selftests: Keep mock file open during unfaultable migrate with fill (rev2)   Krzysztof Karas
  • [PATCH v2] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Krzysztof Niemiec
• [PATCH v4 0/9] Add WildCat Lake support   Dnyaneshwar Bhadane
  • [PATCH v4 1/9] drm/i915/xe3lpd: Add support for display version 30.02   Dnyaneshwar Bhadane
  • [PATCH v4 2/9] drm/xe/xe3: Add support for graphics IP version 30.03   Dnyaneshwar Bhadane
    • [PATCH v4 2/9] drm/xe/xe3: Add support for graphics IP version 30.03   Pottumuttu, Sai Teja
      • [PATCH v4 2/9] drm/xe/xe3: Add support for graphics IP version 30.03   Matt Roper
      • [PATCH v4 2/9] drm/xe/xe3: Add support for graphics IP version 30.03   Bhadane, Dnyaneshwar
  • [PATCH v4 3/9] drm/xe/xe3: Add support for media IP version 30.02   Dnyaneshwar Bhadane
  • [PATCH v4 4/9] drm/i915/xe3lpd: Update bandwidth parameters for display version 30.02   Dnyaneshwar Bhadane
  • [PATCH v4 5/9] drm/i915: Set max cdclk for display 30.02   Dnyaneshwar Bhadane
  • [PATCH v4 6/9] drm/xe: Add Wildcat Lake device IDs to PTL list   Dnyaneshwar Bhadane
  • [PATCH v4 7/9] drm/i915/xe3lpd: Extend DMC path for display version 30.02   Dnyaneshwar Bhadane
    • [PATCH v4 7/9] drm/i915/xe3lpd: Extend DMC path for display version 30.02   Pottumuttu, Sai Teja
  • [PATCH v4 8/9] drm/i915/wcl: C10 phy connected to port A and B   Dnyaneshwar Bhadane
  • [PATCH v4 9/9] drm/i915/xe3lpd: Extend WA 16023981245 for display 30.02   Dnyaneshwar Bhadane
  • [PATCH v4 0/9] Add WildCat Lake support   Jani Nikula
  • ✗ Fi.CI.BUILD: failure for Add WildCat Lake support   Patchwork
    • RE: ✗ Fi.CI.BUILD: failure for Add WildCat Lake support   Bhadane, Dnyaneshwar
• [PATCH 0/3] drm/i915: use drm->debugfs_root when creating debugfs files   Jani Nikula
  • [PATCH 1/3] drm/i915/display: use drm->debugfs_root for creating debugfs files   Jani Nikula
  • [PATCH 2/3] drm/i915/gvt: use drm->debugfs_root for creating debugfs files   Jani Nikula
  • [PATCH 3/3] drm/i915: use drm->debugfs_root for creating debugfs files   Jani Nikula
  • ✗ Fi.CI.CHECKPATCH: warning for drm/i915: use drm->debugfs_root when creating debugfs files   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915: use drm->debugfs_root when creating debugfs files   Patchwork
  • ✓ i915.CI.Full: success for drm/i915: use drm->debugfs_root when creating debugfs files   Patchwork
• [PATCH 0/9] drm/i915/dmc: Deal with loss of pipe DMC state   Ville Syrjala
  • [PATCH 1/9] drm/i915/dmc: Limit pipe DMC clock gating w/a to just ADL/DG2/MTL   Ville Syrjala
  • [PATCH 2/9] drm/i915/dmc: Parametrize MTL_PIPEDMC_GATING_DIS   Ville Syrjala
  • [PATCH 3/9] drm/i915/dmc: Shuffle code around   Ville Syrjala
  • [PATCH 4/9] drm/i915/dmc: Extract dmc_load_program()   Ville Syrjala
    • [PATCH 4/9] drm/i915/dmc: Extract dmc_load_program()   Shankar, Uma
      • [PATCH 4/9] drm/i915/dmc: Extract dmc_load_program()   Ville Syrjälä
      • [PATCH 4/9] drm/i915/dmc: Extract dmc_load_program()   Shankar, Uma
  • [PATCH 5/9] drm/i915/dmc: Reload pipe DMC state on TGL when enabling pipe A   Ville Syrjala
    • [PATCH 5/9] drm/i915/dmc: Reload pipe DMC state on TGL when enabling pipe A   Shankar, Uma
      • [PATCH 5/9] drm/i915/dmc: Reload pipe DMC state on TGL when enabling pipe A   Ville Syrjälä
      • [PATCH 5/9] drm/i915/dmc: Reload pipe DMC state on TGL when enabling pipe A   Shankar, Uma
  • [PATCH 6/9] drm/i915/dmc: Reload pipe DMC MMIO registers for pipe C/D on PTL+   Ville Syrjala
  • [PATCH 7/9] drm/i915/dmc: Assert DMC is loaded harder   Ville Syrjala
    • [PATCH 7/9] drm/i915/dmc: Assert DMC is loaded harder   Shankar, Uma
  • [PATCH 8/9] drm/i915/dmc: Pass crtc_state to intel_dmc_{enable, disable}_pipe()   Ville Syrjala
    • [PATCH 8/9] drm/i915/dmc: Pass crtc_state to intel_dmc_{enable, disable}_pipe()   Shankar, Uma
  • [PATCH 9/9] drm/i915/dmc: Do not enable the pipe DMC on TGL when PSR is possible   Ville Syrjala
    • [PATCH 9/9] drm/i915/dmc: Do not enable the pipe DMC on TGL when PSR is possible   Shankar, Uma
  • ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dmc: Deal with loss of pipe DMC state   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915/dmc: Deal with loss of pipe DMC state   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/dmc: Deal with loss of pipe DMC state   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915/dmc: Deal with loss of pipe DMC state (rev2)   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/dmc: Deal with loss of pipe DMC state (rev2)   Patchwork
• [PATCH 01/13] drm/dp: Introduce new member in drm_backlight_info   Murthy, Arun R
• [PATCH 02/13] drm/dp: Add argument in drm_edp_backlight_init   Murthy, Arun R
• [PATCH 03/13] drm/dp: Add argument for luminance range info in drm_edp_backlight_init   Murthy, Arun R
  • [PATCH 03/13] drm/dp: Add argument for luminance range info in drm_edp_backlight_init   Kandpal, Suraj
    • [PATCH 03/13] drm/dp: Add argument for luminance range info in drm_edp_backlight_init   Murthy, Arun R
      • [PATCH 03/13] drm/dp: Add argument for luminance range info in drm_edp_backlight_init   Kandpal, Suraj
      • [PATCH 03/13] drm/dp: Add argument for luminance range info in drm_edp_backlight_init   Murthy, Arun R
      • [PATCH 03/13] drm/dp: Add argument for luminance range info in drm_edp_backlight_init   Kandpal, Suraj
• [PATCH] drm/i915/gmbus: Add Wa_16025573575 for PTL for bit-bashing   Ankit Nautiyal
  • ✓ i915.CI.BAT: success for drm/i915/gmbus: Add Wa_16025573575 for PTL for bit-bashing   Patchwork
  • ✓ i915.CI.Full: success for drm/i915/gmbus: Add Wa_16025573575 for PTL for bit-bashing   Patchwork
  • [PATCH] drm/i915/gmbus: Add Wa_16025573575 for PTL for bit-bashing   Gustavo Sousa
    • [PATCH] drm/i915/gmbus: Add Wa_16025573575 for PTL for bit-bashing   Nautiyal, Ankit K
      • [PATCH] drm/i915/gmbus: Add Wa_16025573575 for PTL for bit-bashing   Jani Nikula
      • [PATCH] drm/i915/gmbus: Add Wa_16025573575 for PTL for bit-bashing   Gustavo Sousa
      • [PATCH] drm/i915/gmbus: Add Wa_16025573575 for PTL for bit-bashing   Jani Nikula
      • [PATCH] drm/i915/gmbus: Add Wa_16025573575 for PTL for bit-bashing   Nautiyal, Ankit K
• [PATCH v9 0/9] drm/i915: Add drm_panic support   Jocelyn Falempe
  • [PATCH v9 1/9] drm/i915/fbdev: Add intel_fbdev_get_map()   Jocelyn Falempe
  • [PATCH v9 2/9] drm/i915/display/i9xx: Add a disable_tiling() for i9xx planes   Jocelyn Falempe
  • [PATCH v9 3/9] drm/i915/display: Add a disable_tiling() for skl planes   Jocelyn Falempe
  • [PATCH v9 4/9] drm/ttm: Add ttm_bo_kmap_try_from_panic()   Jocelyn Falempe
  • [PATCH v9 5/9] drm/i915: Add intel_bo_panic_setup and intel_bo_panic_finish   Jocelyn Falempe
  • [PATCH v9 6/9] drm/i915/display: Add drm_panic support   Jocelyn Falempe
  • [PATCH v9 7/9] drm/i915/display: Add drm_panic support for Y-tiling with DPT   Jocelyn Falempe
  • [PATCH v9 8/9] drm/i915/display: Add drm_panic support for 4-tiling with DPT   Jocelyn Falempe
  • [PATCH v9 9/9] drm/i915/psr: Add intel_psr2_panic_force_full_update   Jocelyn Falempe
  • ✓ i915.CI.BAT: success for drm/i915: Add drm_panic support (rev9)   Patchwork
  • ✓ i915.CI.Full: success for drm/i915: Add drm_panic support (rev9)   Patchwork
• [PATCH v2] drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled   Tzung-Bi Shih
  • ✓ i915.CI.BAT: success for drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled (rev2)   Patchwork
  • [PATCH v2] drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled   Tvrtko Ursulin
  • ✓ i915.CI.Full: success for drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled (rev2)   Patchwork
• [RESEND 0/5] drm/i915/plane: file and function renames   Jani Nikula
  • [RESEND 1/5] drm/i915/plane: rename intel_atomic_plane.[ch] to intel_plane.[ch]   Jani Nikula
    • [RESEND 1/5] drm/i915/plane: rename intel_atomic_plane.[ch] to intel_plane.[ch]   Gustavo Sousa
    • [PATCH v2] drm/i915/plane: rename intel_atomic_plane.[ch] to intel_plane.[ch]   Jani Nikula
  • [RESEND 2/5] drm/i915/plane: drop atomic from intel_atomic_plane_check_clipping()   Jani Nikula
    • [RESEND 2/5] drm/i915/plane: drop atomic from intel_atomic_plane_check_clipping()   Gustavo Sousa
  • [RESEND 3/5] drm/i915/plane: make intel_plane_atomic_check() static and rename   Jani Nikula
    • [RESEND 3/5] drm/i915/plane: make intel_plane_atomic_check() static and rename   Gustavo Sousa
  • [RESEND 4/5] drm/i915/plane: rename intel_atomic_check_planes() to intel_plane_atomic_check()   Jani Nikula
    • [RESEND 4/5] drm/i915/plane: rename intel_atomic_check_planes() to intel_plane_atomic_check()   Gustavo Sousa
  • [RESEND 5/5] drm/i915/plane: rename intel_atomic_add_affected_planes() to intel_plane_add_affected()   Jani Nikula
    • [RESEND 5/5] drm/i915/plane: rename intel_atomic_add_affected_planes() to intel_plane_add_affected()   Gustavo Sousa
    • [RESEND 5/5] drm/i915/plane: rename intel_atomic_add_affected_planes() to intel_plane_add_affected()   Ville Syrjälä
      • [RESEND 5/5] drm/i915/plane: rename intel_atomic_add_affected_planes() to intel_plane_add_affected()   Ville Syrjälä
  • ✗ i915.CI.BAT: failure for drm/i915/plane: file and function renames (rev2)   Patchwork
  • ✗ i915.CI.BAT: failure for drm/i915/plane: file and function renames (rev3)   Patchwork
  • ✗ i915.CI.BAT: failure for drm/i915/plane: file and function renames (rev4)   Patchwork
  • [RESEND 0/5] drm/i915/plane: file and function renames   Jani Nikula
    • [RESEND 1/5] drm/i915/plane: rename intel_atomic_plane.[ch] to intel_plane.[ch]   Jani Nikula
    • [RESEND 2/5] drm/i915/plane: drop atomic from intel_atomic_plane_check_clipping()   Jani Nikula
    • [RESEND 3/5] drm/i915/plane: make intel_plane_atomic_check() static and rename   Jani Nikula
    • [RESEND 4/5] drm/i915/plane: rename intel_atomic_check_planes() to intel_plane_atomic_check()   Jani Nikula
    • [RESEND 5/5] drm/i915/plane: rename intel_atomic_add_affected_planes() to intel_plane_add_affected()   Jani Nikula
    • ✗ i915.CI.BAT: failure for drm/i915/plane: file and function renames (rev6)   Patchwork
      • ✗ i915.CI.BAT: failure for drm/i915/plane: file and function renames (rev6)   Jani Nikula
      • RE: ✗ i915.CI.BAT: failure for drm/i915/plane: file and function renames (rev6)   Ravali, JupallyX
    • ✓ i915.CI.BAT: success for drm/i915/plane: file and function renames (rev6)   Patchwork
    • ✓ i915.CI.Full: success for drm/i915/plane: file and function renames (rev6)   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915/plane: file and function renames (rev5)   Patchwork
• [PATCH 00/16] drm/i915/display: make all global state opaque   Jani Nikula
  • [PATCH 01/16] drm/i915/wm: abstract intel_dbuf_pmdemand_needs_update()   Jani Nikula
  • [PATCH 02/16] drm/i915/wm: add more accessors to dbuf state   Jani Nikula
  • [PATCH 03/16] drm/i915/wm: make struct intel_dbuf_state opaque type   Jani Nikula
  • [PATCH 04/16] drm/i915/bw: abstract intel_bw_pmdemand_needs_update()   Jani Nikula
  • [PATCH 05/16] drm/i915/bw: relocate intel_can_enable_sagv() and rename to intel_bw_can_enable_sagv()   Jani Nikula
  • [PATCH 06/16] drm/i915: move icl_sagv_{pre, post}_plane_update() to intel_bw.c   Jani Nikula
  • [PATCH 07/16] drm/i915/bw: abstract intel_bw_qgv_point_peakbw()   Jani Nikula
  • [PATCH 08/16] drm/i915/bw: make struct intel_bw_state opaque   Jani Nikula
  • [PATCH 09/16] drm/i915/cdclk: abstract intel_cdclk_logical()   Jani Nikula
  • [PATCH 10/16] drm/i915/cdclk: abstract intel_cdclk_min_cdclk()   Jani Nikula
  • [PATCH 11/16] drm/i915/cdclk: abstract intel_cdclk_bw_min_cdclk()   Jani Nikula
  • [PATCH 12/16] drm/i915/cdclk: abstract intel_cdclk_pmdemand_needs_update()   Jani Nikula
  • [PATCH 13/16] drm/i915/cdclk: abstract intel_cdclk_force_min_cdclk()   Jani Nikula
  • [PATCH 14/16] drm/i915/cdclk: abstract intel_cdclk_read_hw()   Jani Nikula
  • [PATCH 15/16] drm/i915/cdclk: abstract intel_cdclk_actual() and intel_cdclk_actual_voltage_level()   Jani Nikula
    • [PATCH 15/16] drm/i915/cdclk: abstract intel_cdclk_actual() and intel_cdclk_actual_voltage_level()   Imre Deak
      • [PATCH 15/16] drm/i915/cdclk: abstract intel_cdclk_actual() and intel_cdclk_actual_voltage_level()   Jani Nikula
      • [PATCH 15/16] drm/i915/cdclk: abstract intel_cdclk_actual() and intel_cdclk_actual_voltage_level()   Imre Deak
  • [PATCH 16/16] drm/i915/cdclk: make struct intel_cdclk_state opaque   Jani Nikula
  • ✗ i915.CI.BAT: failure for drm/i915/display: make all global state opaque   Patchwork
  • [PATCH 00/16] drm/i915/display: make all global state opaque   Imre Deak
• [PATCH] drm/i915/panel: make panel funcs static   Jani Nikula
  • [PATCH] drm/i915/panel: make panel funcs static   Gustavo Sousa
  • ✗ i915.CI.BAT: failure for drm/i915/panel: make panel funcs static   Patchwork
• Reminder: Registration & Call for Proposals open for XDC 2025   Mark Filion
• [PULL] drm-misc-next   Maxime Ripard
  • [PULL] drm-misc-next   Maxime Ripard
  • [PULL] drm-misc-next   Maxime Ripard
• [PATCH 0/6] drm/i915/dsb: DSB fixed and flip queue prep work   Ville Syrjala
  • [PATCH 1/6] drm/i915/dsb: Use intel_dsb_ins_align() in intel_dsb_align_tail()   Ville Syrjala
  • [PATCH 2/6] drm/i915/dsb: Provide intel_dsb_head() and intel_dsb_size()   Ville Syrjala
  • [PATCH 3/6] drm/i915/dsb: Introduce intel_dsb_exec_time_us()   Ville Syrjala
  • [PATCH 4/6] drm/i915/dsb: Garbage collect the MMIO DEwake stuff   Ville Syrjala
  • [PATCH 5/6] drm/i915/dsb: Move the DSB_PMCTRL* reset out of intel_dsb_finish()   Ville Syrjala
  • [PATCH 6/6] drm/i915/dsb: Disable the GOSUB interrupt   Ville Syrjala
  • ✗ i915.CI.BAT: failure for drm/i915/dsb: DSB fixed and flip queue prep work   Patchwork
    • RE: ✗ i915.CI.BAT: failure for drm/i915/dsb: DSB fixed and flip queue prep work   Saarinen, Jani
  • ✗ i915.CI.BAT: failure for drm/i915/dsb: DSB fixed and flip queue prep work (rev3)   Patchwork
    • RE: ✗ i915.CI.BAT: failure for drm/i915/dsb: DSB fixed and flip queue prep work (rev3)   Saarinen, Jani
      • RE: ✗ i915.CI.BAT: failure for drm/i915/dsb: DSB fixed and flip queue prep work (rev3)   Ravali, JupallyX
  • ✓ i915.CI.BAT: success for drm/i915/dsb: DSB fixed and flip queue prep work (rev3)   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/dsb: DSB fixed and flip queue prep work (rev3)   Patchwork
• [PULL] drm-xe-fixes   Thomas Hellstrom
  • [PULL] drm-xe-fixes   Thomas Hellstrom
  • [PULL] drm-xe-fixes   Thomas Hellstrom
• [PATCH v5 0/9] Add WildCat Lake support   Dnyaneshwar Bhadane
  • [PATCH v5 1/9] drm/i915/xe3lpd: Add support for display version 30.02   Dnyaneshwar Bhadane
  • [PATCH v5 2/9] drm/xe/xe3: Add support for graphics IP version 30.03   Dnyaneshwar Bhadane
  • [PATCH v5 3/9] drm/xe/xe3: Add support for media IP version 30.02   Dnyaneshwar Bhadane
  • [PATCH v5 4/9] drm/i915/xe3lpd: Update bandwidth parameters for display version 30.02   Dnyaneshwar Bhadane
  • [PATCH v5 5/9] drm/i915: Set max cdclk for display 30.02   Dnyaneshwar Bhadane
  • [PATCH v5 6/9] drm/xe: Add Wildcat Lake device IDs to PTL list   Dnyaneshwar Bhadane
  • [PATCH v5 7/9] drm/i915/xe3lpd: Extend DMC load path for display version 30.02   Dnyaneshwar Bhadane
  • [PATCH v5 8/9] drm/i915/wcl: C10 phy connected to port A and B   Dnyaneshwar Bhadane
  • [PATCH v5 9/9] drm/i915/xe3lpd: Extend WA 16023981245 for display 30.02   Dnyaneshwar Bhadane
  • ✗ Fi.CI.BUILD: failure for Add WildCat Lake support (rev2)   Patchwork
• [PATCH] drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64   Ankit Nautiyal
  • [PATCH] drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64   Kandpal, Suraj
  • [PATCH] drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64   Jani Nikula
    • [PATCH] drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64   Nautiyal, Ankit K
      • [PATCH] drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64   Jani Nikula
  • ✗ i915.CI.BAT: failure for drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64   Patchwork
• [RFC PATCH 0/4] New Helper to Initialise writeback connector   Suraj Kandpal
  • [RFC PATCH 1/4] drm/writeback: Add function that takes preallocated connector   Suraj Kandpal
  • [RFC PATCH 2/4] drm/i915/writeback: Add writeback registers   Suraj Kandpal
  • [RFC PATCH 3/4] drm/i915/writeback: Add some preliminary writeback definitions   Suraj Kandpal
  • [RFC PATCH 4/4] drm/i915/writeback: Init writeback connector   Suraj Kandpal
  • ✗ i915.CI.BAT: failure for New Helper to Initialise writeback connector   Patchwork
  • [RFC PATCH 0/4] New Helper to Initialise writeback connector   Harry Wentland
• [PATCH v6 0/9] Add WildCat Lake support   Dnyaneshwar Bhadane
  • [PATCH v6 1/9] drm/i915/xe3lpd: Add support for display version 30.02   Dnyaneshwar Bhadane
  • [PATCH v6 2/9] drm/xe/xe3: Add support for graphics IP version 30.03   Dnyaneshwar Bhadane
  • [PATCH v6 3/9] drm/xe/xe3: Add support for media IP version 30.02   Dnyaneshwar Bhadane
  • [PATCH v6 4/9] drm/i915/xe3lpd: Update bandwidth parameters for display version 30.02   Dnyaneshwar Bhadane
  • [PATCH v6 5/9] drm/i915: Set max cdclk for display 30.02   Dnyaneshwar Bhadane
  • [PATCH v6 6/9] drm/xe: Add Wildcat Lake device IDs to PTL list   Dnyaneshwar Bhadane
  • [PATCH v6 7/9] drm/i915/xe3lpd: Extend DMC load path for display   Dnyaneshwar Bhadane
  • [PATCH v6 8/9] drm/i915/wcl: C10 phy connected to port A and B   Dnyaneshwar Bhadane
    • [PATCH v6 8/9] drm/i915/wcl: C10 phy connected to port A and B   Bhadane, Dnyaneshwar
      • [PATCH v6 8/9] drm/i915/wcl: C10 phy connected to port A and B   Kandpal, Suraj
  • [PATCH v6 9/9] drm/i915/xe3lpd: Extend WA 16023981245 for display 30.02   Dnyaneshwar Bhadane
  • ✗ i915.CI.BAT: failure for Add WildCat Lake support (rev3)   Patchwork
    • ✗ i915.CI.BAT: failure for Add WildCat Lake support (rev3)   Matt Roper
      • ✗ i915.CI.BAT: failure for Add WildCat Lake support (rev3)   Matt Roper
• [PATCH v7 0/5] drm: Create a task info option for wedge events   André Almeida
  • [PATCH v7 1/5] drm: amdgpu: Create amdgpu_vm_print_task_info()   André Almeida
    • [PATCH v7 1/5] drm: amdgpu: Create amdgpu_vm_print_task_info()   Christian König
  • [PATCH v7 2/5] drm: Create a task info option for wedge events   André Almeida
    • [PATCH v7 2/5] drm: Create a task info option for wedge events   Raag Jadav
  • [PATCH v7 3/5] drm/doc: Add a section about "Task information" for the wedge API   André Almeida
  • [PATCH v7 4/5] drm: amdgpu: Use struct drm_wedge_task_info inside of struct amdgpu_task_info   André Almeida
    • [PATCH v7 4/5] drm: amdgpu: Use struct drm_wedge_task_info inside of struct amdgpu_task_info   Christian König
  • [PATCH v7 5/5] drm/amdgpu: Make use of drm_wedge_task_info   André Almeida
    • [PATCH v7 5/5] drm/amdgpu: Make use of drm_wedge_task_info   Alex Deucher
    • [PATCH v7 5/5] drm/amdgpu: Make use of drm_wedge_task_info   Christian König
  • ✗ i915.CI.BAT: failure for drm: Create a task info option for wedge events (rev2)   Patchwork
• [PATCH] drm/i915/guc: Enable CT_DEAD output in regular debug builds   John.C.Harrison at Intel.com
  • ✗ i915.CI.BAT: failure for drm/i915/guc: Enable CT_DEAD output in regular debug builds   Patchwork
• [PATCH v2] drm/i915/guc: Enable CT_DEAD output in regular debug builds   John.C.Harrison at Intel.com
  • ✓ i915.CI.BAT: success for drm/i915/guc: Enable CT_DEAD output in regular debug builds (rev2)   Patchwork
  • ✓ i915.CI.Full: success for drm/i915/guc: Enable CT_DEAD output in regular debug builds (rev2)   Patchwork
• linux-next: Tree for Jun 13 (drivers/gpu/drm/i915/display/intel_backlight.c)   Randy Dunlap
• [PATCH] drm/i915: Add sanity check for relocation entry pointer in execbuffer   Sebastian Brzezinka
  • [PATCH] drm/i915: Add sanity check for relocation entry pointer in execbuffer   Jani Nikula
  • [PATCH] drm/i915: Add sanity check for relocation entry pointer in execbuffer   Tvrtko Ursulin
    • [PATCH] drm/i915: Add sanity check for relocation entry pointer in execbuffer   Sebastian Brzezinka
  • ✗ i915.CI.BAT: failure for drm/i915: Add sanity check for relocation entry pointer in execbuffer   Patchwork
  • [PATCH] drm/i915: Add sanity check for relocation entry pointer in execbuffer   kernel test robot
• [PATCH] dma-fence: Fix sparse warnings due __rcu annotations   Tvrtko Ursulin
  • ✓ i915.CI.BAT: success for dma-fence: Fix sparse warnings due __rcu annotations   Patchwork
  • ✗ i915.CI.Full: failure for dma-fence: Fix sparse warnings due __rcu annotations   Patchwork
• [PATCH 0/9] drm/i915/dp: Implement POST_LT_ADJ_REQ   Imre Deak
• [PATCH v2 1/9] drm/dp: Add definitions for POST_LT_ADJ training sequence   Imre Deak
• [PATCH 5/9] drm/i915/dp: Implement the POST_LT_ADJ_REQ sequence   Imre Deak
• [PATCH 7/9] drm/i915/dp: Implement .set_idle_link_train() for everyone   Imre Deak
• [PATCH 8/9] drm/i915/wcl: C10 phy connected to port A and B   Bhadane, Dnyaneshwar
• [PATCH v8 0/6] drm: Create a task info option for wedge events   André Almeida
  • [PATCH v8 2/6] drm: amdgpu: Create amdgpu_vm_print_task_info()   André Almeida
  • [PATCH v8 3/6] drm: Create a task info option for wedge events   André Almeida
  • [PATCH v8 4/6] drm/doc: Add a section about "Task information" for the wedge API   André Almeida
  • [PATCH v8 5/6] drm: amdgpu: Use struct drm_wedge_task_info inside of struct amdgpu_task_info   André Almeida
  • [PATCH v8 6/6] drm/amdgpu: Make use of drm_wedge_task_info   André Almeida
  • ✗ i915.CI.BAT: failure for drm: Create a task info option for wedge events (rev3)   Patchwork
• [PATCH v8 1/6] drm: amdgpu: Allow NULL pointers at amdgpu_vm_put_task_info()   André Almeida
  • [PATCH v8 1/6] drm: amdgpu: Allow NULL pointers at amdgpu_vm_put_task_info()   Christian König
• [PATCH 02/10] mm/nommu: use file_has_valid_mmap_hooks() helper   Lorenzo Stoakes
  • [PATCH 02/10] mm/nommu: use file_has_valid_mmap_hooks() helper   Jan Kara
  • [PATCH 02/10] mm/nommu: use file_has_valid_mmap_hooks() helper   Vlastimil Babka
• [PATCH 03/10] fs: consistently use file_has_valid_mmap_hooks() helper   Lorenzo Stoakes
  • Re: [PATCH 03/10] fs: consistently use file_has_valid_mmap_hooks() helper   Kees Cook
  • [PATCH 03/10] fs: consistently use file_has_valid_mmap_hooks() helper   Christoph Hellwig
    • [PATCH 03/10] fs: consistently use file_has_valid_mmap_hooks() helper   Lorenzo Stoakes
      • [PATCH 03/10] fs: consistently use file_has_valid_mmap_hooks() helper   Jan Kara
  • [PATCH 03/10] fs: consistently use file_has_valid_mmap_hooks() helper   Christoph Hellwig
  • [PATCH 03/10] fs: consistently use file_has_valid_mmap_hooks() helper   Christian Brauner
• [PATCH 04/10] fs/dax: make it possible to check dev dax support without a VMA   Lorenzo Stoakes
  • [PATCH 04/10] fs/dax: make it possible to check dev dax support without a VMA   Matthew Wilcox
    • [PATCH 04/10] fs/dax: make it possible to check dev dax support without a VMA   Christian Brauner
• [PATCH 06/10] fs/xfs: transition from deprecated .mmap hook to .mmap_prepare   Lorenzo Stoakes
  • [PATCH 06/10] fs/xfs: transition from deprecated .mmap hook to .mmap_prepare   Christoph Hellwig
  • [PATCH 06/10] fs/xfs: transition from deprecated .mmap hook to .mmap_prepare   Christian Brauner
• [PATCH 07/10] mm/filemap: introduce generic_file_*_mmap_prepare() helpers   Lorenzo Stoakes
  • [PATCH 07/10] mm/filemap: introduce generic_file_*_mmap_prepare() helpers   Jan Kara
  • [PATCH 07/10] mm/filemap: introduce generic_file_*_mmap_prepare() helpers   Vlastimil Babka
• [PATCH 08/10] fs: convert simple use of generic_file_*_mmap() to .mmap_prepare()   Lorenzo Stoakes
  • [PATCH 08/10] fs: convert simple use of generic_file_*_mmap() to .mmap_prepare()   Viacheslav Dubeyko
  • [PATCH 08/10] fs: convert simple use of generic_file_*_mmap() to .mmap_prepare()   Jan Kara
  • [PATCH 08/10] fs: convert simple use of generic_file_*_mmap() to .mmap_prepare()   Dave Kleikamp
• [PATCH 09/10] fs: convert most other generic_file_*mmap() users to .mmap_prepare()   Lorenzo Stoakes
  • [PATCH 09/10] fs: convert most other generic_file_*mmap() users to .mmap_prepare()   Jan Kara
    • [PATCH 09/10] fs: convert most other generic_file_*mmap() users to .mmap_prepare()   Christian Brauner
• [PATCH 00/10] convert the majority of file systems to mmap_prepare   Al Viro
  • [PATCH 00/10] convert the majority of file systems to mmap_prepare   Kent Overstreet
    • [PATCH 00/10] convert the majority of file systems to mmap_prepare   Lorenzo Stoakes
      • [PATCH 00/10] convert the majority of file systems to mmap_prepare   David Howells
      • [PATCH 00/10] convert the majority of file systems to mmap_prepare   Lorenzo Stoakes
      • ✓ i915.CI.BAT: success for convert the majority of file systems to mmap_prepare   Patchwork
      • ✓ i915.CI.Full: success for convert the majority of file systems to mmap_prepare   Patchwork
    • [PATCH 00/10] convert the majority of file systems to mmap_prepare   Andrew Morton
  • [PATCH 00/10] convert the majority of file systems to mmap_prepare   Christian Brauner
  • [PATCH 00/10] convert the majority of file systems to mmap_prepare   Christian Brauner
  • [PATCH 00/10] convert the majority of file systems to mmap_prepare   Jeff Layton
  • [PATCH 00/10] convert the majority of file systems to mmap_prepare   Lorenzo Stoakes
• [PATCH 01/10] mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare   Christoph Hellwig
  • [PATCH 01/10] mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare   Lorenzo Stoakes
    • [PATCH 01/10] mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare   Vlastimil Babka
  • [PATCH 01/10] mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare   Lorenzo Stoakes
• [PATCH] drm/i915/panel: register drm_panel and call prepare/unprepare for eDP   Arun R Murthy
  • [PATCH] drm/i915/panel: register drm_panel and call prepare/unprepare for eDP   Jani Nikula
    • [PATCH] drm/i915/panel: register drm_panel and call prepare/unprepare for eDP   Jani Nikula
    • [PATCH] drm/i915/panel: register drm_panel and call prepare/unprepare for eDP   Murthy, Arun R
  • ✗ i915.CI.BAT: failure for drm/i915/panel: register drm_panel and call prepare/unprepare for eDP   Patchwork
• [PATCH 05/10] fs/ext4: transition from deprecated .mmap hook to .mmap_prepare   Jan Kara
  • [PATCH 05/10] fs/ext4: transition from deprecated .mmap hook to .mmap_prepare   Lorenzo Stoakes
• [PATCH 10/10] fs: replace mmap hook with .mmap_prepare for simple mappings   Jan Kara
  • [PATCH 10/10] fs: replace mmap hook with .mmap_prepare for simple mappings   Lorenzo Stoakes
    • [PATCH 10/10] fs: replace mmap hook with .mmap_prepare for simple mappings   Damien Le Moal
    • [PATCH 10/10] fs: replace mmap hook with .mmap_prepare for simple mappings   Viacheslav Dubeyko
    • [PATCH 10/10] fs: replace mmap hook with .mmap_prepare for simple mappings   David Sterba
    • [PATCH 10/10] fs: replace mmap hook with .mmap_prepare for simple mappings   Ryusuke Konishi
  • [PATCH 10/10] fs: replace mmap hook with .mmap_prepare for simple mappings   Christian Brauner
• [REGRESSION][BISECTED] intel iGPU with HDMI PLL stopped working at 1080p at 120Hz 1efd5384   Jani Nikula
  • [REGRESSION][BISECTED] intel iGPU with HDMI PLL stopped working at 1080p at 120Hz 1efd5384   Vas Novikov
  • [REGRESSION][BISECTED] intel iGPU with HDMI PLL stopped working at 1080p at 120Hz 1efd5384   Vas Novikov
  • [REGRESSION][BISECTED] intel iGPU with HDMI PLL stopped working at 1080p at 120Hz 1efd5384   Jani Nikula
    • [REGRESSION][BISECTED] intel iGPU with HDMI PLL stopped working at 1080p at 120Hz 1efd5384   Nautiyal, Ankit K
• [PATCH v9 0/6] drm: Create a task info option for wedge events   André Almeida
  • [PATCH v9 1/6] drm: amdgpu: Allow NULL pointers at amdgpu_vm_put_task_info()   André Almeida
    • [PATCH v9 1/6] drm: amdgpu: Allow NULL pointers at amdgpu_vm_put_task_info()   Christian König
  • [PATCH v9 2/6] drm: amdgpu: Create amdgpu_vm_print_task_info()   André Almeida
    • [PATCH v9 2/6] drm: amdgpu: Create amdgpu_vm_print_task_info()   Christian König
  • [PATCH v9 3/6] drm: Create a task info option for wedge events   André Almeida
    • [PATCH v9 3/6] drm: Create a task info option for wedge events   Christian König
  • [PATCH v9 4/6] drm/doc: Add a section about "Task information" for the wedge API   André Almeida
    • [PATCH v9 4/6] drm/doc: Add a section about "Task information" for the wedge API   Christian König
  • [PATCH v9 5/6] drm: amdgpu: Use struct drm_wedge_task_info inside of struct amdgpu_task_info   André Almeida
  • [PATCH v9 6/6] drm/amdgpu: Make use of drm_wedge_task_info   André Almeida
    • [PATCH v9 6/6] drm/amdgpu: Make use of drm_wedge_task_info   Christian König
      • [PATCH v9 6/6] drm/amdgpu: Make use of drm_wedge_task_info   André Almeida
      • [PATCH v9 6/6] drm/amdgpu: Make use of drm_wedge_task_info   André Almeida
      • [PATCH v9 6/6] drm/amdgpu: Make use of drm_wedge_task_info   Christian König
      • [PATCH v9 6/6] drm/amdgpu: Make use of drm_wedge_task_info   André Almeida
      • [PATCH v9 6/6] drm/amdgpu: Make use of drm_wedge_task_info   André Almeida
  • ✓ i915.CI.BAT: success for drm: Create a task info option for wedge events (rev4)   Patchwork
  • ✗ i915.CI.Full: failure for drm: Create a task info option for wedge events (rev4)   Patchwork
• [PATCH v3] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Krzysztof Karas
  • ✓ i915.CI.BAT: success for drm/i915/selftests: Keep mock file open during unfaultable migrate with fill (rev3)   Patchwork
  • ✓ i915.CI.Full: success for drm/i915/selftests: Keep mock file open during unfaultable migrate with fill (rev3)   Patchwork
  • [PATCH v3] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Krzysztof Niemiec
  • [PATCH v3] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Chris Wilson
    • [PATCH v3] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Krzysztof Karas
      • [PATCH v3] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Chris Wilson
      • [PATCH v3] drm/i915/selftests: Keep mock file open during unfaultable migrate with fill   Krzysztof Karas
• [PATCH v13 00/10] mtd: add driver for Intel discrete graphics   Alexander Usyskin
  • [PATCH v13 01/10] mtd: add driver for intel graphics non-volatile memory device   Alexander Usyskin
  • [PATCH v13 02/10] mtd: intel-dg: implement region enumeration   Alexander Usyskin
  • [PATCH v13 03/10] mtd: intel-dg: implement access functions   Alexander Usyskin
  • [PATCH v13 04/10] mtd: intel-dg: register with mtd   Alexander Usyskin
  • [PATCH v13 05/10] mtd: intel-dg: align 64bit read and write   Alexander Usyskin
  • [PATCH v13 06/10] drm/i915/nvm: add nvm device for discrete graphics   Alexander Usyskin
  • [PATCH v13 07/10] drm/i915/nvm: add support for access mode   Alexander Usyskin
  • [PATCH v13 08/10] drm/xe/nvm: add on-die non-volatile memory device   Alexander Usyskin
  • [PATCH v13 09/10] drm/xe/nvm: add support for access mode   Alexander Usyskin
  • [PATCH v13 10/10] drm/xe/nvm: add support for non-posted erase   Alexander Usyskin
  • ✓ i915.CI.BAT: success for mtd: add driver for Intel discrete graphics (rev14)   Patchwork
  • [PATCH v13 00/10] mtd: add driver for Intel discrete graphics   Rodrigo Vivi
• [PATCH v14 0/8] mtd: add driver for Intel discrete graphics   Alexander Usyskin
  • [PATCH v14 1/8] mtd: add driver for intel graphics non-volatile memory device   Alexander Usyskin
  • [PATCH v14 2/8] mtd: intel-dg: implement region enumeration   Alexander Usyskin
  • [PATCH v14 3/8] mtd: intel-dg: implement access functions   Alexander Usyskin
  • [PATCH v14 4/8] mtd: intel-dg: register with mtd   Alexander Usyskin
  • [PATCH v14 5/8] mtd: intel-dg: align 64bit read and write   Alexander Usyskin
  • [PATCH v14 6/8] drm/xe/nvm: add on-die non-volatile memory device   Alexander Usyskin
  • [PATCH v14 7/8] drm/xe/nvm: add support for access mode   Alexander Usyskin
  • [PATCH v14 8/8] drm/xe/nvm: add support for non-posted erase   Alexander Usyskin
  • ✓ i915.CI.BAT: success for mtd: add driver for Intel discrete graphics (rev15)   Patchwork
  • ✗ i915.CI.Full: failure for mtd: add driver for Intel discrete graphics (rev15)   Patchwork
• [PATCH v2 0/9] drm/i915/dmc: Deal with loss of pipe DMC state   Ville Syrjala
  • [PATCH v2 1/9] drm/i915/dmc: Limit pipe DMC clock gating w/a to just ADL/DG2/MTL   Ville Syrjala
  • [PATCH v2 2/9] drm/i915/dmc: Parametrize MTL_PIPEDMC_GATING_DIS   Ville Syrjala
  • [PATCH v2 3/9] drm/i915/dmc: Shuffle code around   Ville Syrjala
  • [PATCH v2 4/9] drm/i915/dmc: Extract dmc_load_program()   Ville Syrjala
  • [PATCH v2 5/9] drm/i915/dmc: Reload pipe DMC state on TGL when enabling pipe A   Ville Syrjala
  • [PATCH v2 6/9] drm/i915/dmc: Reload pipe DMC MMIO registers for pipe C/D on various platforms   Ville Syrjala
    • [PATCH v2 6/9] drm/i915/dmc: Reload pipe DMC MMIO registers for pipe C/D on various platforms   Shankar, Uma
  • [PATCH v2 7/9] drm/i915/dmc: Assert DMC is loaded harder   Ville Syrjala
  • [PATCH v2 8/9] drm/i915/dmc: Pass crtc_state to intel_dmc_{enable, disable}_pipe()   Ville Syrjala
  • [PATCH v2 9/9] drm/i915/dmc: Do not enable the pipe DMC on TGL when PSR is possible   Ville Syrjala
  • ✓ i915.CI.BAT: success for drm/i915/dmc: Deal with loss of pipe DMC state (rev3)   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/dmc: Deal with loss of pipe DMC state (rev3)   Patchwork
    • RE: ✗ i915.CI.Full: failure for drm/i915/dmc: Deal with loss of pipe DMC state (rev3)   Saarinen, Jani
• linux-next: build warning after merge of the drm-misc tree   Stephen Rothwell
• [PULL] drm-intel-fixes   Joonas Lahtinen
  • [PULL] drm-intel-fixes   Joonas Lahtinen
• [PATCH v2] drm/i915/panel: register drm_panel and call prepare/unprepare for eDP   Arun R Murthy
  • [PATCH v2] drm/i915/panel: register drm_panel and call prepare/unprepare for eDP   Jani Nikula
  • ✓ i915.CI.BAT: success for drm/i915/panel: register drm_panel and call prepare/unprepare for eDP (rev2)   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/panel: register drm_panel and call prepare/unprepare for eDP (rev2)   Patchwork
• [PATCH v10 00/10] drm/i915: Add drm_panic support   Jocelyn Falempe
  • [PATCH v10 01/10] drm/panic: Add a private field to struct drm_scanout_buffer   Jocelyn Falempe
  • [PATCH v10 02/10] drm/i915/fbdev: Add intel_fbdev_get_map()   Jocelyn Falempe
  • [PATCH v10 03/10] drm/i915/display/i9xx: Add a disable_tiling() for i9xx planes   Jocelyn Falempe
  • [PATCH v10 04/10] drm/i915/display: Add a disable_tiling() for skl planes   Jocelyn Falempe
  • [PATCH v10 05/10] drm/ttm: Add ttm_bo_kmap_try_from_panic()   Jocelyn Falempe
    • [PATCH v10 05/10] drm/ttm: Add ttm_bo_kmap_try_from_panic()   Christian König
      • [PATCH v10 05/10] drm/ttm: Add ttm_bo_kmap_try_from_panic()   Jocelyn Falempe
      • [PATCH v10 05/10] drm/ttm: Add ttm_bo_kmap_try_from_panic()   Maarten Lankhorst
  • [PATCH v10 06/10] drm/i915: Add intel_bo_panic_setup and intel_bo_panic_finish   Jocelyn Falempe
  • [PATCH v10 07/10] drm/i915/display: Add drm_panic support   Jocelyn Falempe
  • [PATCH v10 08/10] drm/i915/display: Add drm_panic support for Y-tiling with DPT   Jocelyn Falempe
  • [PATCH v10 09/10] drm/i915/display: Add drm_panic support for 4-tiling with DPT   Jocelyn Falempe
  • [PATCH v10 10/10] drm/i915/psr: Add intel_psr2_panic_force_full_update   Jocelyn Falempe
  • ✗ i915.CI.BAT: failure for drm/i915: Add drm_panic support (rev10)   Patchwork
  • [PATCH v10 00/10] drm/i915: Add drm_panic support   Maarten Lankhorst
    • [PATCH v10 00/10] drm/i915: Add drm_panic support   Jocelyn Falempe
      • [PATCH v10 00/10] drm/i915: Add drm_panic support   Maarten Lankhorst
• [PATCH] drm/xe/display: read PCON capability only when present   Chaitanya Kumar Borah
  • ✓ i915.CI.BAT: success for drm/xe/display: read PCON capability only when present   Patchwork
  • [PATCH] drm/xe/display: read PCON capability only when present   Imre Deak
  • ✗ i915.CI.Full: failure for drm/xe/display: read PCON capability only when present   Patchwork
• No subject   Krzysztof Karas
  • your mail   Krzysztof Karas
• [PATCH 0/2] Fixes in snps-phy HDMI PLL algorithm   Ankit Nautiyal
  • [PATCH 1/2] drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64   Ankit Nautiyal
  • [PATCH 2/2] drm/i915/snps_hdmi_pll: Use clamp() instead of max(min())   Ankit Nautiyal
  • ✓ i915.CI.BAT: success for Fixes in snps-phy HDMI PLL algorithm   Patchwork
  • [PATCH 0/2] Fixes in snps-phy HDMI PLL algorithm   Jani Nikula
    • [PATCH 0/2] Fixes in snps-phy HDMI PLL algorithm   Nautiyal, Ankit K
  • ✗ i915.CI.Full: failure for Fixes in snps-phy HDMI PLL algorithm   Patchwork
  • ✓ i915.CI.Full: success for Fixes in snps-phy HDMI PLL algorithm   Patchwork
• [PATCH 0/2] drm/i915: Miscellaneous clean up changes around i915_drv.h   Krzysztof Karas
  • [PATCH 1/2] drm/i915: Move out engine related macros from i915_drv.h   Krzysztof Karas
    • [PATCH 1/2] drm/i915: Move out engine related macros from i915_drv.h   Andi Shyti
  • [PATCH 2/2] drm/i915: move GEM_QUIRK_PIN_SWIZZLED_PAGES to i915_gem.h   Krzysztof Karas
    • [PATCH 2/2] drm/i915: move GEM_QUIRK_PIN_SWIZZLED_PAGES to i915_gem.h   Andi Shyti
      • [PATCH 2/2] drm/i915: move GEM_QUIRK_PIN_SWIZZLED_PAGES to i915_gem.h   Krzysztof Karas
  • ✓ i915.CI.BAT: success for drm/i915: Miscellaneous clean up changes around i915_drv.h   Patchwork
  • [PATCH 0/2] drm/i915: Miscellaneous clean up changes around i915_drv.h   Jani Nikula
  • ✓ i915.CI.Full: success for drm/i915: Miscellaneous clean up changes around i915_drv.h   Patchwork
  • [PATCH 0/2] drm/i915: Miscellaneous clean up changes around i915_drv.h   Sebastian Brzezinka
  • [PATCH 0/2] drm/i915: Miscellaneous clean up changes around i915_drv.h   Andi Shyti
• [PATCH v15 0/9] ref_tracker: add ability to register a debugfs file for a ref_tracker_dir   Jeff Layton
  • [PATCH v15 1/9] ref_tracker: don't use %pK in pr_ostream() output   Jeff Layton
  • [PATCH v15 2/9] ref_tracker: add a top level debugfs directory for ref_tracker   Jeff Layton
  • [PATCH v15 3/9] ref_tracker: have callers pass output function to pr_ostream()   Jeff Layton
    • [PATCH v15 3/9] ref_tracker: have callers pass output function to pr_ostream()   Krzysztof Karas
  • [PATCH v15 4/9] ref_tracker: add a static classname string to each ref_tracker_dir   Jeff Layton
    • [PATCH v15 4/9] ref_tracker: add a static classname string to each ref_tracker_dir   Krzysztof Karas
  • [PATCH v15 5/9] ref_tracker: allow pr_ostream() to print directly to a seq_file   Jeff Layton
    • [PATCH v15 5/9] ref_tracker: allow pr_ostream() to print directly to a seq_file   Krzysztof Karas
      • [PATCH v15 5/9] ref_tracker: allow pr_ostream() to print directly to a seq_file   Jeff Layton
      • [PATCH v15 5/9] ref_tracker: allow pr_ostream() to print directly to a seq_file   Krzysztof Karas
  • [PATCH v15 6/9] ref_tracker: automatically register a file in debugfs for a ref_tracker_dir   Jeff Layton
  • [PATCH v15 7/9] ref_tracker: add a way to create a symlink to the ref_tracker_dir debugfs file   Jeff Layton
  • [PATCH v15 8/9] net: add symlinks to ref_tracker_dir for netns   Jeff Layton
  • [PATCH v15 9/9] ref_tracker: eliminate the ref_tracker_dir name field   Jeff Layton
  • ✓ i915.CI.BAT: success for ref_tracker: add ability to register a debugfs file for a ref_tracker_dir (rev11)   Patchwork
  • ✗ i915.CI.Full: failure for ref_tracker: add ability to register a debugfs file for a ref_tracker_dir (rev11)   Patchwork
  • [PATCH v15 0/9] ref_tracker: add ability to register a debugfs file for a ref_tracker_dir   Jakub Kicinski
    • [PATCH v15 0/9] ref_tracker: add ability to register a debugfs file for a ref_tracker_dir   Eric Dumazet
• [PATCH] drm/i915/vrr: fix register file style   Jani Nikula
  • ✓ i915.CI.BAT: success for drm/i915/vrr: fix register file style   Patchwork
  • [PATCH] drm/i915/vrr: fix register file style   Nautiyal, Ankit K
    • [PATCH] drm/i915/vrr: fix register file style   Jani Nikula
  • ✓ i915.CI.Full: success for drm/i915/vrr: fix register file style   Patchwork
• [PULL] drm-intel-next   Jani Nikula
• [PULL] drm-xe-next   Rodrigo Vivi
• [PATCH] drm/i915/hdcp: Use HDCP2_STREAM_STATUS to verify content type status   Suraj Kandpal
  • ✓ i915.CI.BAT: success for drm/i915/hdcp: Use HDCP2_STREAM_STATUS to verify content type status   Patchwork
  • [PATCH] drm/i915/hdcp: Use HDCP2_STREAM_STATUS to verify content type status   Golani, Mitulkumar Ajitkumar
    • [PATCH] drm/i915/hdcp: Use HDCP2_STREAM_STATUS to verify content type status   Kandpal, Suraj
  • [PATCH] drm/i915/hdcp: Use HDCP2_STREAM_STATUS to verify content type status   Jani Nikula
    • [PATCH] drm/i915/hdcp: Use HDCP2_STREAM_STATUS to verify content type status   Kandpal, Suraj
      • [PATCH] drm/i915/hdcp: Use HDCP2_STREAM_STATUS to verify content type status   Jani Nikula
  • ✗ i915.CI.Full: failure for drm/i915/hdcp: Use HDCP2_STREAM_STATUS to verify content type status   Patchwork
• [PATCH v2] drm/xe/display: read PCON capability only when present   Chaitanya Kumar Borah
  • ✓ i915.CI.BAT: success for drm/xe/display: read PCON capability only when present (rev2)   Patchwork
  • [PATCH v2] drm/xe/display: read PCON capability only when present   Imre Deak
  • ✗ i915.CI.Full: failure for drm/xe/display: read PCON capability only when present (rev2)   Patchwork
  • ✓ i915.CI.Full: success for drm/xe/display: read PCON capability only when present (rev2)   Patchwork
• [PATCH 04/13] drm/dp: Move from u16 to u32 for max in drm_edp_backlight_info   Murthy, Arun R
• [PATCH 05/13] drm/dp: Change current_level argument type to u32   Murthy, Arun R
• [PATCH 0/2] Changes in hdcp2_stream_encryption   Suraj Kandpal
  • [PATCH 1/2] drm/i915/hdcp: Do not use inline intel_de_read   Suraj Kandpal
    • [PATCH 1/2] drm/i915/hdcp: Do not use inline intel_de_read   Jani Nikula
      • [PATCH 1/2] drm/i915/hdcp: Do not use inline intel_de_read   Kandpal, Suraj
  • [PATCH 2/2] drm/i915/hdcp: Use HDCP2_STREAM_STATUS instead of HDCP2_AUTH_STREAM   Suraj Kandpal
  • [PATCH 0/2] Changes in hdcp2_stream_encryption   Suraj Kandpal
    • [PATCH 1/2] drm/i915/hdcp: Do not use inline intel_de_read   Suraj Kandpal
    • [PATCH 2/2] drm/i915/hdcp: Use HDCP2_STREAM_STATUS instead of HDCP2_AUTH_STREAM   Suraj Kandpal
    • ✓ i915.CI.BAT: success for Changes in hdcp2_stream_encryption (rev2)   Patchwork
    • ✓ i915.CI.Full: success for Changes in hdcp2_stream_encryption (rev2)   Patchwork
    • [PATCH 0/2] Changes in hdcp2_stream_encryption   Jani Nikula
• [PATCH] drm/i915/display: move unordered works to new private workqueue   Luca Coelho
  • [PATCH] drm/i915/display: move unordered works to new private workqueue   Jani Nikula
    • [PATCH] drm/i915/display: move unordered works to new private workqueue   Coelho, Luciano
  • ✗ i915.CI.BAT: failure for drm/i915/display: move unordered works to new private workqueue   Patchwork
• [PATCH 06/13] drm/dp: Modify drm_edp_probe_state   Murthy, Arun R
• [PATCH 09/13] drm/dp: Change argument type of drm_edp_backlight_enable   Murthy, Arun R
• [PATCH 10/13] drm/dp: Enable backlight control using luminance   Murthy, Arun R
  • [PATCH 10/13] drm/dp: Enable backlight control using luminance   Kandpal, Suraj
    • [PATCH 10/13] drm/dp: Enable backlight control using luminance   Murthy, Arun R
• [PATCH 11/13] drm/i915/backlight: Use drm helper to initialize edp backlight   Murthy, Arun R
  • [PATCH 11/13] drm/i915/backlight: Use drm helper to initialize edp backlight   Kandpal, Suraj
• [PATCH 12/13] drm/i915/backlight: Use drm helper to set edp backlight   Murthy, Arun R
• [PATCH 13/13] drm/i915/backlight: Use drm_edp_backlight_enable   Murthy, Arun R
• [PATCH 07/13] drm/dp: Change argument type for drm_edp_backlight_set_level   Kandpal, Suraj
  • [PATCH 07/13] drm/dp: Change argument type for drm_edp_backlight_set_level   Murthy, Arun R
• [PATCH 08/13] drm/dp: Modify drm_edp_backlight_set_level   Murthy, Arun R
• [PATCH 00/13] Modify drm helpers to use luminance   Suraj Kandpal
  • [PATCH v3 01/13] drm/dp: Introduce new member in drm_backlight_info   Suraj Kandpal
  • [PATCH v3 02/13] drm/dp: Add argument in drm_edp_backlight_init   Suraj Kandpal
  • [PATCH v3 03/13] drm/dp: Add argument for max luminance in drm_edp_backlight_init   Suraj Kandpal
    • [PATCH v3 03/13] drm/dp: Add argument for max luminance in drm_edp_backlight_init   Murthy, Arun R
  • [PATCH v3 04/13] drm/dp: Move from u16 to u32 for max in drm_edp_backlight_info   Suraj Kandpal
    • [PATCH v3 04/13] drm/dp: Move from u16 to u32 for max in drm_edp_backlight_info   Murthy, Arun R
  • [PATCH v3 05/13] drm/dp: Change current_level argument type to u32   Suraj Kandpal
  • [PATCH v3 06/13] drm/dp: Modify drm_edp_probe_state   Suraj Kandpal
  • [PATCH v3 07/13] drm/dp: Change argument type for drm_edp_backlight_set_level   Suraj Kandpal
  • [PATCH v3 08/13] drm/dp: Modify drm_edp_backlight_set_level   Suraj Kandpal
  • [PATCH v3 09/13] drm/dp: Change argument type of drm_edp_backlight_enable   Suraj Kandpal
  • [PATCH v3 10/13] drm/dp: Enable backlight control using luminance   Suraj Kandpal
  • [PATCH v3 11/13] drm/i915/backlight: Use drm helper to initialize edp backlight   Suraj Kandpal
    • [PATCH v3 11/13] drm/i915/backlight: Use drm helper to initialize edp backlight   Murthy, Arun R
      • [PATCH v3 11/13] drm/i915/backlight: Use drm helper to initialize edp backlight   Kandpal, Suraj
      • [PATCH v3 11/13] drm/i915/backlight: Use drm helper to initialize edp backlight   Murthy, Arun R
      • [PATCH v3 11/13] drm/i915/backlight: Use drm helper to initialize edp backlight   Kandpal, Suraj
      • [PATCH v3 11/13] drm/i915/backlight: Use drm helper to initialize edp backlight   Kandpal, Suraj
  • [PATCH v3 12/13] drm/i915/backlight: Use drm helper to set edp backlight   Suraj Kandpal
  • [PATCH v3 13/13] drm/i915/backlight: Use drm_edp_backlight_enable   Suraj Kandpal
  • ✓ i915.CI.BAT: success for Modify drm helpers to use luminance (rev4)   Patchwork
  • ✓ i915.CI.Full: success for Modify drm helpers to use luminance (rev4)   Patchwork
  • [PATCH 00/13] Modify drm helpers to use luminance   Jani Nikula
    • [PATCH 00/13] Modify drm helpers to use luminance   Kandpal, Suraj
      • [PATCH 00/13] Modify drm helpers to use luminance   Kandpal, Suraj
• [PATCH v2] drm/i915/display: move unordered works to new private workqueue   Luca Coelho
  • ✓ i915.CI.BAT: success for drm/i915/display: move unordered works to new private workqueue (rev2)   Patchwork
  • ✓ i915.CI.Full: success for drm/i915/display: move unordered works to new private workqueue (rev2)   Patchwork
  • [PATCH v2] drm/i915/display: move unordered works to new private workqueue   Jani Nikula
• [PATCH] i915: fix build error some more   Arnd Bergmann
  • ✓ i915.CI.BAT: success for i915: fix build error some more   Patchwork
  • ✗ i915.CI.Full: failure for i915: fix build error some more   Patchwork
  • [PATCH] i915: fix build error some more   Rodrigo Vivi
    • [PATCH] i915: fix build error some more   Rodrigo Vivi
• [PATCH] drm/i915: reduce stack usage in igt_vma_pin1()   Arnd Bergmann
  • ✓ i915.CI.BAT: success for drm/i915: reduce stack usage in igt_vma_pin1()   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915: reduce stack usage in igt_vma_pin1()   Patchwork
  • [PATCH] drm/i915: reduce stack usage in igt_vma_pin1()   Rodrigo Vivi
    • [PATCH] drm/i915: reduce stack usage in igt_vma_pin1()   Rodrigo Vivi
• [PATCH] drm/i915/wm: reduce stack usage in skl_print_wm_changes()   Arnd Bergmann
  • ✓ i915.CI.BAT: success for drm/i915/wm: reduce stack usage in skl_print_wm_changes()   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/wm: reduce stack usage in skl_print_wm_changes()   Patchwork
  • [PATCH] drm/i915/wm: reduce stack usage in skl_print_wm_changes()   Rodrigo Vivi
• [PATCH 0/2] Revert patch to reject HBR3 for all eDP panels   Ankit Nautiyal
  • [PATCH 1/2] Revert "drm/i915/dp: Reject HBR3 when sink doesn't support TPS4"   Ankit Nautiyal
    • [PATCH 1/2] Revert "drm/i915/dp: Reject HBR3 when sink doesn't support TPS4"   Ville Syrjälä
      • [PATCH 1/2] Revert "drm/i915/dp: Reject HBR3 when sink doesn't support TPS4"   Nautiyal, Ankit K
      • [PATCH 1/2] Revert "drm/i915/dp: Reject HBR3 when sink doesn't support TPS4"   Ville Syrjälä
      • [PATCH 1/2] Revert "drm/i915/dp: Reject HBR3 when sink doesn't support TPS4"   Jani Nikula
      • [PATCH 1/2] Revert "drm/i915/dp: Reject HBR3 when sink doesn't support TPS4"   Ville Syrjälä
  • [PATCH 2/2] drm/i915/dp: Add device specific quirk to limit eDP rate to HBR2   Ankit Nautiyal
    • [PATCH 2/2] drm/i915/dp: Add device specific quirk to limit eDP rate to HBR2   Jani Nikula
      • [PATCH 2/2] drm/i915/dp: Add device specific quirk to limit eDP rate to HBR2   Nautiyal, Ankit K
  • ✓ i915.CI.BAT: success for Revert patch to reject HBR3 for all eDP panels   Patchwork
  • ✗ i915.CI.Full: failure for Revert patch to reject HBR3 for all eDP panels   Patchwork
  • ✓ i915.CI.Full: success for Revert patch to reject HBR3 for all eDP panels   Patchwork
• [PATCH v3 28/54] dyndbg: restore classmap protection when theres a controlling_param   Sean Paul
• [CI 0/6] drm/i915, drm/xe: add drm device based pcode interface for display   Jani Nikula
  • [CI 1/6] drm/i915/pcode: drop fast wait from snb_pcode_write_timeout()   Jani Nikula
  • [CI 2/6] drm/i915/pcode: add struct drm_device based interface   Jani Nikula
  • [CI 3/6] drm/xe/pcode: add struct drm_device based interface   Jani Nikula
    • [CI 3/6] drm/xe/pcode: add struct drm_device based interface   kernel test robot
    • [CI 3/6] drm/xe/pcode: add struct drm_device based interface   Lucas De Marchi
      • [CI 3/6] drm/xe/pcode: add struct drm_device based interface   Jani Nikula
      • [CI 3/6] drm/xe/pcode: add struct drm_device based interface   Lucas De Marchi
  • [CI 4/6] drm/i915/display: switch to struct drm_device based pcode interface   Jani Nikula
  • [CI 5/6] drm/i915/dram: switch to struct drm_device based pcode interface   Jani Nikula
  • [CI 6/6] drm/xe/compat: remove old pcode compat interface   Jani Nikula
  • ✓ i915.CI.BAT: success for drm/i915, drm/xe: add drm device based pcode interface for display (rev3)   Patchwork
  • ✓ i915.CI.Full: success for drm/i915, drm/xe: add drm device based pcode interface for display (rev3)   Patchwork
• [PATCH 1/1] drm/i915/display: Add quirk to force backlight type on some TUXEDO devices   Werner Sembach
• [PATCH v3] drm/i915/panel: register drm_panel and call prepare/unprepare for eDP   Arun R Murthy
  • ✓ i915.CI.BAT: success for drm/i915/panel: register drm_panel and call prepare/unprepare for eDP (rev3)   Patchwork
  • ✓ i915.CI.Full: success for drm/i915/panel: register drm_panel and call prepare/unprepare for eDP (rev3)   Patchwork
• [PATCH v7 00/18] Enable/Disable DC balance along with VRR DSB   Mitul Golani
  • [PATCH v7 01/18] drm/i915/vrr: Refactor vmin/vmax stuff   Mitul Golani
  • [PATCH v7 02/18] drm/i915/display: Add source param for dc balance   Mitul Golani
  • [PATCH v7 03/18] drm/i915/display: Add pipe dmc registers and bits for DC Balance   Mitul Golani
  • [PATCH v7 04/18] drm/i915/display: Add VRR DC balance registers   Mitul Golani
    • [PATCH v7 04/18] drm/i915/display: Add VRR DC balance registers   Jani Nikula
  • [PATCH v7 05/18] drm/i915/vrr: Add functions to read out vmin/vmax stuff   Mitul Golani
  • [PATCH v7 06/18] drm/i915/vrr: Add DC Balance params to crtc_state   Mitul Golani
    • [PATCH v7 06/18] drm/i915/vrr: Add DC Balance params to crtc_state   Jani Nikula
  • [PATCH v7 07/18] drm/i915/vrr: Add state dump for DC Balance params   Mitul Golani
  • [PATCH v7 08/18] drm/i915/vrr: Add compute config for DC Balance params   Mitul Golani
  • [PATCH v7 09/18] drm/i915/vrr: Write DC balance params to hw registers   Mitul Golani
  • [PATCH v7 10/18] drm/i915: Extract vrr_vblank_start()   Mitul Golani
  • [PATCH v7 11/18] drm/i915/vrr: Implement vblank evasion with DC balancing   Mitul Golani
  • [PATCH v7 12/18] drm/i915/dsb: Add pipedmc dc balance enable/disable   Mitul Golani
    • [PATCH v7 12/18] drm/i915/dsb: Add pipedmc dc balance enable/disable   Jani Nikula
  • [PATCH v7 13/18] drm/i915/vrr: Restructure VRR enablement bit   Mitul Golani
  • [PATCH v7 14/18] drm/i915/vrr: Pause DC Balancing for DSB commits   Mitul Golani
  • [PATCH v7 15/18] drm/i915/vrr: Add function to check if DC Balance Possible   Mitul Golani
  • [PATCH v7 16/18] drm/i915/display: Add function to configure PIPEDMC_EVT_CTL   Mitul Golani
  • [PATCH v7 17/18] drm/i915/vrr: Enable Adaptive sync counter bit   Mitul Golani
  • [PATCH v7 18/18] drm/i915/vrr: Enable DC Balance   Mitul Golani
  • ✓ i915.CI.BAT: success for Enable/Disable DC balance along with VRR DSB (rev7)   Patchwork
  • ✗ i915.CI.Full: failure for Enable/Disable DC balance along with VRR DSB (rev7)   Patchwork
• [PATCH v11 00/11] drm/i915: Add drm_panic support   Jocelyn Falempe
  • [PATCH v11 01/11] drm/panic: Add a private field to struct drm_scanout_buffer   Jocelyn Falempe
  • [PATCH v11 02/11] drm/i915/fbdev: Add intel_fbdev_get_map()   Jocelyn Falempe
  • [PATCH v11 03/11] drm/i915/display/i9xx: Add a disable_tiling() for i9xx planes   Jocelyn Falempe
  • [PATCH v11 04/11] drm/i915/display: Add a disable_tiling() for skl planes   Jocelyn Falempe
  • [PATCH v11 05/11] drm/ttm: Add ttm_bo_kmap_try_from_panic()   Jocelyn Falempe
  • [PATCH v11 06/11] drm/i915: Add intel_bo_alloc_framebuffer()   Jocelyn Falempe
  • [PATCH v11 07/11] drm/i915: Add intel_bo_panic_setup() and intel_bo_panic_finish()   Jocelyn Falempe
  • [PATCH v11 08/11] drm/i915/display: Add drm_panic support   Jocelyn Falempe
  • [PATCH v11 09/11] drm/i915/display: Add drm_panic support for Y-tiling with DPT   Jocelyn Falempe
  • [PATCH v11 10/11] drm/i915/display: Add drm_panic support for 4-tiling with DPT   Jocelyn Falempe
  • [PATCH v11 11/11] drm/i915/psr: Add intel_psr2_panic_force_full_update   Jocelyn Falempe
  • ✓ i915.CI.BAT: success for drm/i915: Add drm_panic support (rev11)   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915: Add drm_panic support (rev11)   Patchwork
• [PATCH] drm/display/dp: Use static values for min_hblank   Arun R Murthy
  • [PATCH] drm/display/dp: Use static values for min_hblank   Jani Nikula
    • [PATCH] drm/display/dp: Use static values for min_hblank   Murthy, Arun R
  • ✗ i915.CI.BAT: failure for drm/display/dp: Use static values for min_hblank   Patchwork
• [PATCH v2] drm/i915/display: Use static values for min_hblank   Arun R Murthy
  • ✗ i915.CI.BAT: failure for drm/i915/display: Use static values for min_hblank   Patchwork
  • [PATCH v2] drm/i915/display: Use static values for min_hblank   Imre Deak
• [PATCH v2 1/5] drm/i915: Use kernel_write() in shmem object create   Matthew Wilcox
  • [PATCH v2 1/5] drm/i915: Use kernel_write() in shmem object create   陈涛涛 Taotao Chen
  • [PATCH v2 1/5] drm/i915: Use kernel_write() in shmem object create   Chentaotao
• [PATCH v2 3/5] fs: change write_begin/write_end interface to take struct kiocb *   Matthew Wilcox
  • [PATCH v2 3/5] fs: change write_begin/write_end interface to take struct kiocb *   Christian Brauner
    • [PATCH v2 3/5] fs: change write_begin/write_end interface to take struct kiocb *   Chen Taotao
• [PATCH v2 5/5] ext4: declare support for FOP_DONTCACHE   Matthew Wilcox
  • [PATCH v2 5/5] ext4: declare support for FOP_DONTCACHE   Chen Taotao
• [PATCH v2 0/5] fs: refactor write_begin/write_end and add ext4 IOCB_DONTCACHE support   Matthew Wilcox
  • [PATCH v2 0/5] fs: refactor write_begin/write_end and add ext4 IOCB_DONTCACHE support   陈涛涛 Taotao Chen
    • [PATCH v2 2/5] drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter   陈涛涛 Taotao Chen
    • [PATCH v2 3/5] fs: change write_begin/write_end interface to take struct kiocb *   陈涛涛 Taotao Chen
    • [PATCH v2 4/5] ext4: handle IOCB_DONTCACHE in buffered write path   陈涛涛 Taotao Chen
      • [PATCH v2 4/5] ext4: handle IOCB_DONTCACHE in buffered write path   Theodore Ts'o
    • [PATCH v2 5/5] ext4: declare support for FOP_DONTCACHE   陈涛涛 Taotao Chen
      • [PATCH v2 5/5] ext4: declare support for FOP_DONTCACHE   Theodore Ts'o
    • ✗ LGCI.VerificationFailed: failure for fs: refactor write_begin/write_end and add ext4 IOCB_DONTCACHE support   Patchwork
    • [PATCH v2 0/5] fs: refactor write_begin/write_end and add ext4 IOCB_DONTCACHE support   hch at infradead.org
• [PATCH v3 0/1] drm/i915/display: Add no_psr_reason to PSR debugfs   Michał Grzelak
  • [PATCH v3 1/1] drm/i915/display: Add no_psr_reason to PSR debugfs   Michał Grzelak
• [PATCH v5 0/9] drm/i915/flipq: Rough flip queue implementation   Ville Syrjala
  • [PATCH v5 1/9] drm/i915: Set PKG_C_LATENCY.added_wake_time to 0   Ville Syrjala
  • [PATCH v5 2/9] drm/i915: Try to program PKG_C_LATENCY more correctly   Ville Syrjala
    • [PATCH v5 2/9] drm/i915: Try to program PKG_C_LATENCY more correctly   Shankar, Uma
  • [PATCH v5 3/9] drm/i915/dmc: Define flip queue related PIPEDMC registers   Ville Syrjala
  • [PATCH v5 4/9] drm/i915/flipq: Provide the nuts and bolts code for flip queue   Ville Syrjala
  • [PATCH v5 5/9] drm/i915/flipq: Implement flip queue based commit path   Ville Syrjala
  • [PATCH v5 6/9] drm/i915/flipq: Implement Wa_18034343758   Ville Syrjala
  • [PATCH v5 7/9] drm/i915/flipq: Implement Wa_16018781658 for LNL-A0   Ville Syrjala
  • [PATCH v5 8/9] drm/i915/flipq: Add intel_flipq_dump()   Ville Syrjala
  • [PATCH v5 9/9] drm/i915/flipq: Enable flipq by default for testing   Ville Syrjala
  • ✓ i915.CI.BAT: success for drm/i915/flipq: Rough flip queue implementation (rev9)   Patchwork
  • ✓ i915.CI.Full: success for drm/i915/flipq: Rough flip queue implementation (rev9)   Patchwork
• [PATCH v3] drm/i915/display: Use the recomended min_hblank values   Arun R Murthy
  • ✗ i915.CI.BAT: failure for drm/i915/display: Use the recomended min_hblank values   Patchwork
  • [PATCH v3] drm/i915/display: Use the recomended min_hblank values   Imre Deak
• [CI v2 00/16] drm/i915/display: make all global state opaque   Jani Nikula
  • [CI v2 01/16] drm/i915/wm: abstract intel_dbuf_pmdemand_needs_update()   Jani Nikula
  • [CI v2 02/16] drm/i915/wm: add more accessors to dbuf state   Jani Nikula
  • [CI v2 03/16] drm/i915/wm: make struct intel_dbuf_state opaque type   Jani Nikula
  • [CI v2 04/16] drm/i915/bw: abstract intel_bw_pmdemand_needs_update()   Jani Nikula
  • [CI v2 05/16] drm/i915/bw: relocate intel_can_enable_sagv() and rename to intel_bw_can_enable_sagv()   Jani Nikula
  • [CI v2 06/16] drm/i915: move icl_sagv_{pre, post}_plane_update() to intel_bw.c   Jani Nikula
  • [CI v2 07/16] drm/i915/bw: abstract intel_bw_qgv_point_peakbw()   Jani Nikula
  • [CI v2 08/16] drm/i915/bw: make struct intel_bw_state opaque   Jani Nikula
  • [CI v2 09/16] drm/i915/cdclk: abstract intel_cdclk_logical()   Jani Nikula
  • [CI v2 10/16] drm/i915/cdclk: abstract intel_cdclk_min_cdclk()   Jani Nikula
  • [CI v2 11/16] drm/i915/cdclk: abstract intel_cdclk_bw_min_cdclk()   Jani Nikula
  • [CI v2 12/16] drm/i915/cdclk: abstract intel_cdclk_pmdemand_needs_update()   Jani Nikula
  • [CI v2 13/16] drm/i915/cdclk: abstract intel_cdclk_force_min_cdclk()   Jani Nikula
  • [CI v2 14/16] drm/i915/cdclk: abstract intel_cdclk_read_hw()   Jani Nikula
  • [CI v2 15/16] drm/i915/cdclk: abstract intel_cdclk_actual() and intel_cdclk_actual_voltage_level()   Jani Nikula
  • [CI v2 16/16] drm/i915/cdclk: make struct intel_cdclk_state opaque   Jani Nikula
  • ✓ i915.CI.BAT: success for drm/i915/display: make all global state opaque (rev2)   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/display: make all global state opaque (rev2)   Patchwork
• [PATCH 0/3] drm/i915/power: power well register cleanups   Jani Nikula
  • [PATCH 1/3] drm/i915/power: move enum skl_power_gate under display   Jani Nikula
    • [PATCH 1/3] drm/i915/power: move enum skl_power_gate under display   Rodrigo Vivi
  • [PATCH 2/3] drm/i915/power: relocate {SKL,ICL}_PW_CTL_IDX_TO_PG()   Jani Nikula
    • [PATCH 2/3] drm/i915/power: relocate {SKL, ICL}_PW_CTL_IDX_TO_PG()   Rodrigo Vivi
  • [PATCH 3/3] drm/i915/power: convert {SKL, ICL}_PW_CTL_IDX_TO_PG() macros to a function   Jani Nikula
    • [PATCH 3/3] drm/i915/power: convert {SKL, ICL}_PW_CTL_IDX_TO_PG() macros to a function   Rodrigo Vivi
  • ✓ i915.CI.BAT: success for drm/i915/power: power well register cleanups   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/power: power well register cleanups   Patchwork
• [PATCH] drm/i915: remove unused DISPLAY_PLANE_FLIP_PENDING() macro   Jani Nikula
  • [PATCH] drm/i915: remove unused DISPLAY_PLANE_FLIP_PENDING() macro   Rodrigo Vivi
    • [PATCH] drm/i915: remove unused DISPLAY_PLANE_FLIP_PENDING() macro   Jani Nikula
  • ✗ i915.CI.BAT: failure for drm/i915: remove unused DISPLAY_PLANE_FLIP_PENDING() macro   Patchwork
  • ✗ i915.CI.BAT: failure for drm/i915: remove unused DISPLAY_PLANE_FLIP_PENDING() macro (rev2)   Patchwork
• [PATCH v2] drm/i915/selftests: Change mock_request() to return error pointers   Dan Carpenter
  • ✓ i915.CI.BAT: success for drm/i915/selftests: Change mock_request() to return error pointers   Patchwork
  • [PATCH v2] drm/i915/selftests: Change mock_request() to return error pointers   Rodrigo Vivi
    • [PATCH v2] drm/i915/selftests: Change mock_request() to return error pointers   Rodrigo Vivi
  • ✗ i915.CI.Full: failure for drm/i915/selftests: Change mock_request() to return error pointers   Patchwork
• linux-next: Tree for Jun 25 (drivers/gpu/drm/{i915,xe}/intel_pcode.o)   Randy Dunlap
  • linux-next: Tree for Jun 25 (drivers/gpu/drm/{i915,xe}/intel_pcode.o)   Lucas De Marchi
• [PATCH 00/20] drm/i915/dp: Fix few SST HPD IRQ handling issues   Imre Deak
  • [PATCH 09/20] drm/i915/dp: Fix the device service IRQ DPCD_REV check   Imre Deak
  • [PATCH 10/20] drm/i915/dp: Fix the link service IRQ DPCD_REV check   Imre Deak
  • [PATCH 11/20] drm/i915/dp: Reprobe connector if getting/acking device IRQs fails   Imre Deak
    • [PATCH 11/20] drm/i915/dp: Reprobe connector if getting/acking device IRQs fails   Jani Nikula
      • [PATCH 11/20] drm/i915/dp: Reprobe connector if getting/acking device IRQs fails   Imre Deak
      • [PATCH 11/20] drm/i915/dp: Reprobe connector if getting/acking device IRQs fails   Jani Nikula
      • [PATCH 11/20] drm/i915/dp: Reprobe connector if getting/acking device IRQs fails   Imre Deak
      • [PATCH 11/20] drm/i915/dp: Reprobe connector if getting/acking device IRQs fails   Jani Nikula
      • [PATCH 11/20] drm/i915/dp: Reprobe connector if getting/acking device IRQs fails   Imre Deak
  • [PATCH 12/20] drm/i915/dp: Reprobe connector if getting/acking link service IRQs fails   Imre Deak
  • [PATCH 13/20] drm/i915/dp: Return early if getting/acking device service IRQs fails   Imre Deak
  • [PATCH 14/20] drm/i915/dp: Return early if getting/ackink link service IRQs fails   Imre Deak
  • [PATCH 15/20] drm/i915/dp: Read/ack sink count and sink IRQs for SST as it's done for MST   Imre Deak
  • [PATCH 16/20] drm/i915/dp: Print debug message for a sink connected off request   Imre Deak
  • [PATCH 17/20] drm/i915/dp: Check SST link status while handling link service IRQs   Imre Deak
  • [PATCH 18/20] drm/i915/dp_mst: Reuse intel_dp_handle_link_service_irq()   Imre Deak
  • [PATCH 19/20] drm/i915/dp: Ack only the handled device service IRQs   Imre Deak
  • [PATCH 20/20] drm/i915/dp: Ack only the handled link service IRQs   Imre Deak
  • ✓ i915.CI.BAT: success for drm/i915/dp: Fix few SST HPD IRQ handling issues   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/dp: Fix few SST HPD IRQ handling issues   Patchwork
• [PATCH 01/20] drm/i915/dp_mst: Reprobe connector if the IRQ ESI read failed   Imre Deak
  • [PATCH 01/20] drm/i915/dp_mst: Reprobe connector if the IRQ ESI read failed   Luca Coelho
• [PATCH 02/20] drm/i915/dp_mst: Verify the link status always the same way   Imre Deak
  • [PATCH 02/20] drm/i915/dp_mst: Verify the link status always the same way   Jani Nikula
    • [PATCH 02/20] drm/i915/dp_mst: Verify the link status always the same way   Imre Deak
• [PATCH 03/20] drm/i915/dp_mst: Reuse intel_dp_check_link_state() in the HPD IRQ handler   Imre Deak
• [PATCH 04/20] drm/i915/dp: Handle a tunneling IRQ after acking it   Imre Deak
• [PATCH 05/20] drm/i915/dp: Handle the RX_CAP_CHANGED HPD IRQ   Imre Deak
• [PATCH 06/20] drm/i915/dp: Handle the DOWNSTREAM_PORT_STATUS_CHANGED event   Imre Deak
• [PATCH 07/20] drm/i915/dp: Don't clobber the encoder state in the HPD IRQ handler   Imre Deak
• [PATCH 08/20] drm/i915/dp: Remove the device service IRQ handling from connector detect   Imre Deak
• [PATCH] drm/i915/display: drop a number of dependencies on i915_drv.h   Jani Nikula
  • [PATCH] drm/i915/display: drop a number of dependencies on i915_drv.h   Luca Coelho
  • ✗ i915.CI.BAT: failure for drm/i915/display: drop a number of dependencies on i915_drv.h   Patchwork
    • ✗ i915.CI.BAT: failure for drm/i915/display: drop a number of dependencies on i915_drv.h   Jani Nikula
• [PATCH] drm/i915/fb: use struct intel_display for DISPLAY_VER()   Jani Nikula
  • [PATCH] drm/i915/fb: use struct intel_display for DISPLAY_VER()   Kandpal, Suraj
  • ✓ i915.CI.BAT: success for drm/i915/fb: use struct intel_display for DISPLAY_VER()   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/fb: use struct intel_display for DISPLAY_VER()   Patchwork
• [PATCH v2 0/1] Enable VRSR   Mohammed Thasleem
  • [PATCH v2 1/1] tests/intel/kms_pm_vrsr: Add test to validate VRAM Self Refresh   Mohammed Thasleem
• [RFC] [PATCH v2 0/1] Enable VRSR   Mohammed Thasleem
  • ✗ Fi.CI.BUILD: failure for Enable VRSR (rev2)   Patchwork
• [RFC] [PATCH v2 1/1] tests/intel/kms_pm_vrsr: Add test to validate VRAM Self Refresh   Mohammed Thasleem
• [PATCH] drm/i915/dsi: Fix NULL pointer deref in vlv_dphy_param_init()   Hans de Goede
  • [PATCH] drm/i915/dsi: Fix NULL pointer deref in vlv_dphy_param_init()   Jani Nikula
    • [PATCH] drm/i915/dsi: Fix NULL pointer deref in vlv_dphy_param_init()   Hans de Goede
  • ✓ i915.CI.BAT: success for drm/i915/dsi: Fix NULL pointer deref in vlv_dphy_param_init()   Patchwork
  • ✓ i915.CI.Full: success for drm/i915/dsi: Fix NULL pointer deref in vlv_dphy_param_init()   Patchwork
• [PATCH] iopoll: use fsleep() instead of usleep_range()   Jani Nikula
  • [PATCH] iopoll: use fsleep() instead of usleep_range()   Geert Uytterhoeven
    • [PATCH] iopoll: use fsleep() instead of usleep_range()   Jani Nikula
  • ✓ i915.CI.BAT: success for iopoll: use fsleep() instead of usleep_range()   Patchwork
  • ✓ i915.CI.Full: success for iopoll: use fsleep() instead of usleep_range()   Patchwork
• [PATCH 0/8] drm/i915/display: use intel_de_wait_*() functions   Jani Nikula
  • [PATCH 1/8] drm/i915/hdmi: use intel_de_wait_for_set() instead of wait_for()   Jani Nikula
  • [PATCH 2/8] drm/i915/ddi: use intel_de_wait_custom() instead of wait_for_us()   Jani Nikula
    • [PATCH 2/8] drm/i915/ddi: use intel_de_wait_custom() instead of wait_for_us()   Jani Nikula
    • [PATCH v2] drm/i915/ddi: use intel_de_wait_custom() instead of wait_for_us()   Jani Nikula
  • [PATCH 3/8] drm/i915/dpll: use intel_de_wait_custom() instead of wait_for_us()   Jani Nikula
  • [PATCH 4/8] drm/i915/cdclk: use intel_de_wait_custom() instead of wait_for_us()   Jani Nikula
  • [PATCH 5/8] drm/i915/hdcp: use intel_de_wait_for_set() instead of wait_for()   Jani Nikula
    • [PATCH 5/8] drm/i915/hdcp: use intel_de_wait_for_set() instead of wait_for()   Kandpal, Suraj
  • [PATCH 6/8] drm/i915/power: use intel_de_wait_custom() instead of wait_for_us()   Jani Nikula
  • [PATCH 7/8] drm/i915/pch: use intel_de_wait_custom() instead of wait_for_us()   Jani Nikula
  • [PATCH 8/8] drm/i915/dsi: use intel_de_wait_custom() instead of wait_for_us()   Jani Nikula
  • ✗ i915.CI.BAT: failure for drm/i915/display: use intel_de_wait_*() functions   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915/display: use intel_de_wait_*() functions (rev2)   Patchwork
  • ✗ i915.CI.Full: failure for drm/i915/display: use intel_de_wait_*() functions (rev2)   Patchwork
• [PATCH] drm/i915/power: use intel_de_wait_for_clear() instead of wait_for()   Jani Nikula
  • [PATCH] drm/i915/power: use intel_de_wait_for_clear() instead of wait_for()   Imre Deak
  • [PATCH v2] drm/i915/power: use intel_de_wait_for_clear() instead of wait_for()   Jani Nikula
    • [PATCH v2] drm/i915/power: use intel_de_wait_for_clear() instead of wait_for()   Imre Deak
  • ✓ i915.CI.BAT: success for drm/i915/power: use intel_de_wait_for_clear() instead of wait_for()   Patchwork
  • ✓ i915.CI.BAT: success for drm/i915/power: use intel_de_wait_for_clear() instead of wait_for() (rev2)   Patchwork
  • ✓ i915.CI.Full: success for drm/i915/power: use intel_de_wait_for_clear() instead of wait_for() (rev2)   Patchwork
• [PATCH v4] drm/xe: Allow building as kernel built-in   Lucas De Marchi
• [PATCH v1] drm/ci: i915: cml: Fix the runner tag   Vignesh Raman
  • ✓ i915.CI.BAT: success for drm/ci: i915: cml: Fix the runner tag   Patchwork
  • ✓ i915.CI.Full: success for drm/ci: i915: cml: Fix the runner tag   Patchwork
• [PATCH 0/1] Revert patch to reject HBR3 for all eDP panels   Ankit Nautiyal
  • [PATCH 1/1] drm/i915/dp: Refine TPS4-based HBR3 rejection and add quirk to limit eDP to HBR2   Ankit Nautiyal
    • [PATCH 1/1] drm/i915/dp: Refine TPS4-based HBR3 rejection and add quirk to limit eDP to HBR2   Nautiyal, Ankit K
  • ✓ i915.CI.BAT: success for Revert patch to reject HBR3 for all eDP panels (rev2)   Patchwork
• [PATCH v3 0/4] fs: refactor write_begin/write_end and add ext4 IOCB_DONTCACHE support   陈涛涛 Taotao Chen
  • [PATCH v3 1/4] drm/i915: Use kernel_write() in shmem object create   陈涛涛 Taotao Chen
  • [PATCH v3 2/4] drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter   陈涛涛 Taotao Chen
  • [PATCH v3 3/4] fs: change write_begin/write_end interface to take struct kiocb *   陈涛涛 Taotao Chen
  • [PATCH v3 4/4] ext4: support uncached buffered I/O   陈涛涛 Taotao Chen
• [PATCH 00/18] drm/i915/display: convert to generic read_poll_timeout()   Jani Nikula
  • [PATCH 01/18] drm/i915/hdmi: use generic read_poll_timeout() instead of __wait_for()   Jani Nikula
  • [PATCH 02/18] drm/i915/hdcp: use generic read_poll_timeout() instead of __wait_for()   Jani Nikula
    • [PATCH 02/18] drm/i915/hdcp: use generic read_poll_timeout() instead of __wait_for()   Kandpal, Suraj
  • [PATCH 03/18] drm/i915/dsi: use generic read_poll_timeout() instead of wait_for_us()   Jani Nikula
  • [PATCH 04/18] drm/i915/dsi-pll: use generic read_poll_timeout() instead of wait_for()   Jani Nikula
  • [PATCH 05/18] drm/i915/gmbus: use generic read_poll_timeout*() instead of wait_for*()   Jani Nikula
  • [PATCH 06/18] drm/i915/wm: use generic read_poll_timeout() instead of wait_for()   Jani Nikula
  • [PATCH 07/18] drm/i915/cdclk: use generic read_poll_timeout() instead of wait_for()   Jani Nikula
  • [PATCH 08/18] drm/i915/power: use generic read_poll_timeout() instead of wait_for()   Jani Nikula
  • [PATCH 09/18] drm/i915/power-well: use generic read_poll_timeout() instead of wait_for() for DKL PHY   Jani Nikula
  • [PATCH 10/18] drm/i915/power-well: use generic read_poll_timeout() instead of wait_for() for VLV/CHV   Jani Nikula
  • [PATCH 11/18] drm/i915/dp: use generic read_poll_timeout() instead of wait_for()   Jani Nikula
  • [PATCH 12/18] drm/i915/dp: use generic read_poll_timeout() instead of wait_for() in link training   Jani Nikula
  • [PATCH 13/18] drm/i915/vblank: use generic read_poll_timeout() instead of wait_for()   Jani Nikula
  • [PATCH 14/18] drm/i915/tc: use generic read_poll_timeout() instead of wait_for()   Jani Nikula
  • [PATCH 15/18] drm/i915/dsb: use generic read_poll_timeout() instead of wait_for()   Jani Nikula
  • [PATCH 16/18] drm/i915/lspcon: use generic read_poll_timeout() instead of wait_for()   Jani Nikula
  • [PATCH 17/18] drm/i915/opregion: use generic read_poll_timeout() instead of wait_for()   Jani Nikula
  • [PATCH 18/18] drm/i915/ddi: prefer read_poll_timeout() over readx_poll_timeout()   Jani Nikula
    • [PATCH 18/18] drm/i915/ddi: prefer read_poll_timeout() over readx_poll_timeout()   Imre Deak
      • [PATCH 18/18] drm/i915/ddi: prefer read_poll_timeout() over readx_poll_timeout()   Jani Nikula
    • [PATCH 18/18] drm/i915/ddi: prefer read_poll_timeout() over readx_poll_timeout()   Ville Syrjälä
      • [PATCH 18/18] drm/i915/ddi: prefer read_poll_timeout() over readx_poll_timeout()   Jani Nikula
      • [PATCH 18/18] drm/i915/ddi: prefer read_poll_timeout() over readx_poll_timeout()   Ville Syrjälä
      • [PATCH 18/18] drm/i915/ddi: prefer read_poll_timeout() over readx_poll_timeout()   Jani Nikula
      • [PATCH 18/18] drm/i915/ddi: prefer read_poll_timeout() over readx_poll_timeout()   Ville Syrjälä
      • [PATCH 18/18] drm/i915/ddi: prefer read_poll_timeout() over readx_poll_timeout()   David Laight
    • [PATCH v2] drm/i915/ddi: prefer read_poll_timeout() over readx_poll_timeout()   Jani Nikula
  • ✓ i915.CI.BAT: success for drm/i915/display: convert to generic read_poll_timeout() (rev2)   Patchwork
• [PATCH v3 3/4] fs: change write_begin/write_end interface to take struct kiocb *   Matthew Wilcox
  • [PATCH v3 3/4] fs: change write_begin/write_end interface to take struct kiocb *   Matthew Wilcox
• [PATCH v3 4/4] ext4: support uncached buffered I/O   Matthew Wilcox
  • [PATCH v3 4/4] ext4: support uncached buffered I/O   hch at infradead.org
• [Regression] Panel flickering on Dell XPS 13 9360 with drm-fixes-2025-06-28 merged (Linux 6.16-rc4)   Paul Menzel
  • [Regression] Panel flickering on Dell XPS 13 9360 with drm-fixes-2025-06-28 merged (Linux 6.16-rc4)   Imre Deak
    • [Regression] Panel flickering on Dell XPS 13 9360 with drm-fixes-2025-06-28 merged (Linux 6.16-rc4)   Paul Menzel
• [PATCH 0/2] Introduce helper for display workarounds and add Wa_16025573575   Ankit Nautiyal
  • [PATCH 1/2] drm/i915/display_wa: Add helpers to check wa   Ankit Nautiyal
    • [PATCH 1/2] drm/i915/display_wa: Add helpers to check wa   Jani Nikula
      • [PATCH 1/2] drm/i915/display_wa: Add helpers to check wa   Nautiyal, Ankit K
  • [PATCH 2/2] drm/i915/gmbus: Add Wa_16025573575 for PTL for bit-bashing   Ankit Nautiyal
  • ✓ i915.CI.BAT: success for Introduce helper for display workarounds and add Wa_16025573575   Patchwork
• [PATCH] drm/i915/display: Optimize panel power-on wait time   Dibin Moolakadan Subrahmanian
  • ✓ i915.CI.BAT: success for drm/i915/display: Optimize panel power-on wait time   Patchwork
• [PATCH] drm/ttm: Remove unneeded blank line in comment   Jocelyn Falempe
  • [PATCH] drm/ttm: Remove unneeded blank line in comment   Thomas Zimmermann
  • [PATCH] drm/ttm: Remove unneeded blank line in comment   Christian König
  • ✓ i915.CI.BAT: success for drm/ttm: Remove unneeded blank line in comment   Patchwork
• [PATCH topic/core-for-CI] Revert "ftrace: Allow configuring global trace buffer size (for dump-on-oops)"   Lucas De Marchi
  • ✓ i915.CI.BAT: success for Revert "ftrace: Allow configuring global trace buffer size (for dump-on-oops)"   Patchwork
• [PATCH] drm/i915/gsc: mei interrupt top half should be in irq disabled context   Rodrigo Vivi

Last message date: Mon Jun 30 22:20:02 UTC 2025
Archived on: Mon Jun 30 22:20:14 UTC 2025

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...