[PATCH] drm/i915/gvt: add pcode read/write emulation of BDW

[Zhenyu Wang]

On 2017.02.24 14:14:53 +0800, Weinan Li wrote:
> Add pcode read/write emulation in gvt for BDW.
> 
> Signed-off-by: Weinan Li <weinan.z.li at intel.com>
> ---
>  drivers/gpu/drm/i915/gvt/handlers.c | 33 ++++++++++++++++++---------------
>  1 file changed, 18 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
> index f89b183..223b366 100644
> --- a/drivers/gpu/drm/i915/gvt/handlers.c
> +++ b/drivers/gpu/drm/i915/gvt/handlers.c
> @@ -1304,21 +1304,24 @@ static int mailbox_write(struct intel_vgpu *vgpu, unsigned int offset,
>  	u32 *data0 = &vgpu_vreg(vgpu, GEN6_PCODE_DATA);
>  
>  	switch (cmd) {
> -	case 0x6:
> -		/**
> -		 * "Read memory latency" command on gen9.
> -		 * Below memory latency values are read
> -		 * from skylake platform.
> -		 */
> -		if (!*data0)
> -			*data0 = 0x1e1a1100;
> -		else
> -			*data0 = 0x61514b3d;
> +	case GEN9_PCODE_READ_MEM_LATENCY:
> +		if (IS_SKYLAKE(vgpu->gvt->dev_priv)) {
> +			/**
> +			 * "Read memory latency" command on gen9.
> +			 * Below memory latency values are read
> +			 * from skylake platform.
> +			 */
> +			if (!*data0)
> +				*data0 = 0x1e1a1100;
> +			else
> +				*data0 = 0x61514b3d;
> +			}

indent error.

>  		break;
>  	case SKL_PCODE_CDCLK_CONTROL:
> -		*data0 = SKL_CDCLK_READY_FOR_CHANGE;
> +		if (IS_SKYLAKE(vgpu->gvt->dev_priv))
> +			*data0 = SKL_CDCLK_READY_FOR_CHANGE;
>  		break;
> -	case 0x5:
> +	case GEN6_PCODE_READ_RC6VIDS:
>  		*data0 |= 0x1;
>  		break;
>  	}
> @@ -2202,7 +2205,7 @@ static int init_generic_mmio_info(struct intel_gvt *gvt)
>  
>  	MMIO_F(0x4f000, 0x90, 0, 0, 0, D_ALL, NULL, NULL);
>  
> -	MMIO_D(GEN6_PCODE_MAILBOX, D_PRE_SKL);
> +	MMIO_D(GEN6_PCODE_MAILBOX, D_PRE_BDW);
>  	MMIO_D(GEN6_PCODE_DATA, D_ALL);
>  	MMIO_D(0x13812c, D_ALL);
>  	MMIO_DH(GEN7_ERR_INT, D_ALL, NULL, NULL);
> @@ -2281,7 +2284,6 @@ static int init_generic_mmio_info(struct intel_gvt *gvt)
>  	MMIO_D(0x1a054, D_ALL);
>  
>  	MMIO_D(0x44070, D_ALL);
> -
>  	MMIO_D(0x215c, D_HSW_PLUS);
>  	MMIO_DFH(0x2178, D_ALL, F_CMD_ACCESS, NULL, NULL);
>  	MMIO_DFH(0x217c, D_ALL, F_CMD_ACCESS, NULL, NULL);
> @@ -2453,6 +2455,8 @@ static int init_broadwell_mmio_info(struct intel_gvt *gvt)
>  	MMIO_D(GEN7_MISCCPCTL, D_BDW_PLUS);
>  	MMIO_D(0x1c054, D_BDW_PLUS);
>  
> +	MMIO_DH(GEN6_PCODE_MAILBOX, D_BDW_PLUS, NULL, mailbox_write);
> +
>  	MMIO_D(GEN8_PRIVATE_PAT_LO, D_BDW_PLUS);
>  	MMIO_D(GEN8_PRIVATE_PAT_HI, D_BDW_PLUS);
>  
> @@ -2544,7 +2548,6 @@ static int init_skl_mmio_info(struct intel_gvt *gvt)
>  	MMIO_D(HSW_PWR_WELL_BIOS, D_SKL);
>  	MMIO_DH(HSW_PWR_WELL_DRIVER, D_SKL, NULL, skl_power_well_ctl_write);
>  
> -	MMIO_DH(GEN6_PCODE_MAILBOX, D_SKL, NULL, mailbox_write);
>  	MMIO_D(0xa210, D_SKL_PLUS);
>  	MMIO_D(GEN9_MEDIA_PG_IDLE_HYSTERESIS, D_SKL_PLUS);
>  	MMIO_D(GEN9_RENDER_PG_IDLE_HYSTERESIS, D_SKL_PLUS);
> -- 
> 1.9.1
> 
> _______________________________________________
> intel-gvt-dev mailing list
> intel-gvt-dev at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gvt-dev

-- 
Open Source Technology Center, Intel ltd.

$gpg --keyserver wwwkeys.pgp.net --recv-keys 4D781827
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 163 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/intel-gvt-dev/attachments/20170224/5fec082b/attachment.sig>