[Intel-xe] [CIv2 24/31] drm/xe/irq: Untangle postinstall functions

Matt Roper matthew.d.roper at intel.com
Thu Jun 1 21:52:37 UTC 2023


The xe_irq_postinstall() never actually gets called after installing the
interrupt handler.  This oversight seems to get papered over due to the
fact that the (misnamed) xe_gt_irq_postinstall does more than it really
should and gets called in the middle of the GT initialization.  The
callstack for postinstall is also a bit muddled with top-level device
interrupt enablement happening within platform-specific functions called
from the per-tile xe_gt_irq_postinstall() function.

Clean this all up by adding the missing call to xe_irq_postinstall()
after installing the interrupt handler and pull top-level irq enablement
up to xe_irq_postinstall where we'd expect it to be.

The xe_gt_irq_postinstall() function is still a bit misnamed here; an
upcoming patch will refocus its purpose and rename it.

v2:
 - Squash in patch to actually call xe_irq_postinstall() after
   installing the interrupt handler.

Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi at intel.com>
---
 drivers/gpu/drm/xe/xe_irq.c | 37 +++++++++----------------------------
 1 file changed, 9 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/xe/xe_irq.c b/drivers/gpu/drm/xe/xe_irq.c
index c069e374a947..85bb9bd6b6be 100644
--- a/drivers/gpu/drm/xe/xe_irq.c
+++ b/drivers/gpu/drm/xe/xe_irq.c
@@ -122,7 +122,7 @@ static inline void xelp_intr_enable(struct xe_device *xe, bool stall)
 		xe_mmio_read32(mmio, GFX_MSTR_IRQ);
 }
 
-static void gt_irq_postinstall(struct xe_tile *tile)
+void xe_gt_irq_postinstall(struct xe_tile *tile)
 {
 	struct xe_device *xe = tile_to_xe(tile);
 	struct xe_gt *mmio = tile->primary_gt;
@@ -181,15 +181,6 @@ static void gt_irq_postinstall(struct xe_tile *tile)
 	xe_mmio_write32(mmio, GUC_SG_INTR_MASK,  ~0);
 }
 
-static void xelp_irq_postinstall(struct xe_device *xe, struct xe_tile *tile)
-{
-	/* TODO: PCH */
-
-	gt_irq_postinstall(tile);
-
-	xelp_intr_enable(xe, true);
-}
-
 static u32
 gt_engine_identity(struct xe_device *xe,
 		   struct xe_gt *mmio,
@@ -366,14 +357,6 @@ static void dg1_intr_enable(struct xe_device *xe, bool stall)
 		xe_mmio_read32(mmio, DG1_MSTR_TILE_INTR);
 }
 
-static void dg1_irq_postinstall(struct xe_device *xe, struct xe_tile *tile)
-{
-	gt_irq_postinstall(tile);
-
-	if (tile->id == 0)
-		dg1_intr_enable(xe, true);
-}
-
 /*
  * Top-level interrupt handler for Xe_LP+ and beyond.  These platforms have
  * a "master tile" interrupt register which must be consulted before the
@@ -512,16 +495,6 @@ static void xe_irq_reset(struct xe_device *xe)
 	xe_display_irq_reset(xe);
 }
 
-void xe_gt_irq_postinstall(struct xe_tile *tile)
-{
-	struct xe_device *xe = tile_to_xe(tile);
-
-	if (GRAPHICS_VERx100(xe) >= 1210)
-		dg1_irq_postinstall(xe, tile);
-	else
-		xelp_irq_postinstall(xe, tile);
-}
-
 static void xe_irq_postinstall(struct xe_device *xe)
 {
 	struct xe_tile *tile;
@@ -538,6 +511,12 @@ static void xe_irq_postinstall(struct xe_device *xe)
 	 */
 	unmask_and_enable(xe_device_get_root_tile(xe),
 			  GU_MISC_IRQ_OFFSET, GU_MISC_GSE);
+
+	/* Enable top-level interrupts */
+	if (GRAPHICS_VERx100(xe) >= 1210)
+		dg1_intr_enable(xe, true);
+	else
+		xelp_intr_enable(xe, true);
 }
 
 static irq_handler_t xe_irq_handler(struct xe_device *xe)
@@ -588,6 +567,8 @@ int xe_irq_install(struct xe_device *xe)
 		return err;
 	}
 
+	xe_irq_postinstall(xe);
+
 	err = drmm_add_action_or_reset(&xe->drm, irq_uninstall, xe);
 	if (err)
 		return err;
-- 
2.40.1



More information about the Intel-xe mailing list