[Intel-xe] [PATCH v3 2/2] drm/xe: Set default MOCS value for copy cs instructions

[José Roberto de Souza]

copy cs instructions that dont have a explict MOCS field will use this
default MOCS value.

This was mainly copied from i915 source code.

v2:
- move to xe_hw_engine.c
- remove BLIT_CCTL auxiliary macros
- removed MASKED_REG

v3:
- rebased

BSpec: 45807
Cc: Matt Roper <matthew.d.roper at intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
 drivers/gpu/drm/xe/regs/xe_engine_regs.h |  6 ++++++
 drivers/gpu/drm/xe/xe_hw_engine.c        | 16 ++++++++++++++++
 2 files changed, 22 insertions(+)

diff --git a/drivers/gpu/drm/xe/regs/xe_engine_regs.h b/drivers/gpu/drm/xe/regs/xe_engine_regs.h
index 717d560626cec..b0ba56342773a 100644
--- a/drivers/gpu/drm/xe/regs/xe_engine_regs.h
+++ b/drivers/gpu/drm/xe/regs/xe_engine_regs.h
@@ -58,6 +58,12 @@
 
 #define RING_BBADDR(base)			XE_REG((base) + 0x140)
 #define RING_BBADDR_UDW(base)			XE_REG((base) + 0x168)
+
+/* Same handling MOCS value handling done in RING_CMD_CCTL */
+#define BLIT_CCTL(base)				XE_REG((base) + 0x204)
+#define   BLIT_CCTL_DST_MOCS_MASK		REG_GENMASK(14, 9)
+#define   BLIT_CCTL_SRC_MOCS_MASK		REG_GENMASK(6, 1)
+
 #define RING_EXECLIST_STATUS_LO(base)		XE_REG((base) + 0x234)
 #define RING_EXECLIST_STATUS_HI(base)		XE_REG((base) + 0x234 + 4)
 
diff --git a/drivers/gpu/drm/xe/xe_hw_engine.c b/drivers/gpu/drm/xe/xe_hw_engine.c
index d497f0289c372..284b153cd30b5 100644
--- a/drivers/gpu/drm/xe/xe_hw_engine.c
+++ b/drivers/gpu/drm/xe/xe_hw_engine.c
@@ -277,6 +277,8 @@ hw_engine_setup_default_state(struct xe_hw_engine *hwe)
 	const u8 mocs_read_idx = gt->mocs.uc_index;
 	u32 ring_cmd_cctl_val = REG_FIELD_PREP(CMD_CCTL_WRITE_OVERRIDE_MASK, mocs_write_idx) |
 			        REG_FIELD_PREP(CMD_CCTL_READ_OVERRIDE_MASK, mocs_read_idx);
+	u32 blit_cctl_val = REG_FIELD_PREP(BLIT_CCTL_DST_MOCS_MASK, mocs_write_idx) |
+			    REG_FIELD_PREP(BLIT_CCTL_SRC_MOCS_MASK, mocs_read_idx);
 	const struct xe_rtp_entry engine_was[] = {
 		/*
 		 * RING_CMD_CCTL specifies the default MOCS entry that will be
@@ -295,6 +297,20 @@ hw_engine_setup_default_state(struct xe_hw_engine *hwe)
 					   ring_cmd_cctl_val,
 					   XE_RTP_ACTION_FLAG(ENGINE_BASE)))
 		},
+		/*
+		 * Some blitter commands do not have a field for MOCS, those
+		 * commands will use MOCS index pointed by BLIT_CCTL.
+		 * BLIT_CCTL registers are needed to be programmed to un-cached.
+		 */
+		{ XE_RTP_NAME("BLIT_CCTL_default_MOCS"),
+		  XE_RTP_RULES(GRAPHICS_VERSION_RANGE(1200, XE_RTP_END_VERSION_UNDEFINED),
+			       ENGINE_CLASS(COPY)),
+		  XE_RTP_ACTIONS(FIELD_SET(BLIT_CCTL(0),
+				 BLIT_CCTL_DST_MOCS_MASK |
+				 BLIT_CCTL_SRC_MOCS_MASK,
+				 blit_cctl_val,
+				 XE_RTP_ACTION_FLAG(ENGINE_BASE)))
+		},
 		{}
 	};
 
-- 
2.40.1