[Intel-xe] [PATCH v4 10/30] drm/i915/display: Consolidate saved port bits in intel_digital_port
Taylor, Clinton A
clinton.a.taylor at intel.com
Tue Sep 19 20:50:54 UTC 2023
On Mon, 2023-09-18 at 15:43 -0700, Matt Roper wrote:
> On Mon, Sep 18, 2023 at 04:06:58PM -0500, Lucas De Marchi wrote:
> > On Fri, Sep 15, 2023 at 12:50:41PM -0700, Matt Roper wrote:
> > > On Fri, Sep 15, 2023 at 10:46:31AM -0700, Lucas De Marchi wrote:
> > > > From: Clint Taylor <clinton.a.taylor at intel.com>
> > > >
> > > > We use multiple variables for HDMI and DisplayPort to store the value of
> > > > DDI_BUF_CTL register (now called DDI_CTL_DE in the spec). Consolidate it
> > > > to just one in struct intel_digital_port. This is a preparation step for
> > > > future changes in D2D enable/disable sequence for xe2lpd that need to
> > > > save some additional bits.
> > > >
> > > > Cc: Anusha Srivatsa <anusha.srivatsa at intel.com>
> > > > Cc: Gustavo Sousa <gustavo.sousa at intel.com>
> > > > Cc: Radhakrishna Sripada <radhakrishna.sripada at intel.com>
> > > > Signed-off-by: Clint Taylor <clinton.a.taylor at intel.com>
> > > > Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
> > > > ---
> > > > drivers/gpu/drm/i915/display/intel_ddi.c | 36 +++++++++++-------------
> > > > drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
> > > > 2 files changed, 18 insertions(+), 20 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> > > > b/drivers/gpu/drm/i915/display/intel_ddi.c
> > > > index 4668de45d6fe..29c9386659ff 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > > > @@ -325,26 +325,25 @@ static void intel_ddi_init_dp_buf_reg(struct intel_encoder
> > > > *encoder,
> > > > const struct intel_crtc_state *crtc_state)
> > > > {
> > > > struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> > > > - struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> > > > struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
> > > > enum phy phy = intel_port_to_phy(i915, encoder->port);
> > > >
> > > > /* DDI_BUF_CTL_ENABLE will be set by intel_ddi_prepare_link_retrain()
> > > > later */
> > > > - intel_dp->DP = dig_port->saved_port_bits |
> > > > + dig_port->saved_port_bits |=
> > >
> > > Before this patch, saved_port_bits was a copy of DDI_BUF_PORT_REVERSAL
> > > and DDI_A_4_LANES, either based on a value we readout from hardware at
> > > startup, or based on VBT settings. So it was a value of some
> > > fundamental settings that we "saved" once at startup time and could then
> > > just re-use thereafter.
> > >
> > > If we're going to start saving per-modeset information (such as lane
> > > count and link rate), then that's a pretty fundamental change to the
> > > purpose of this field, and "saved_port_bits" doesn't really feel like an
> > > appropriate name anymore. We should probably rename it and add some
> > > documentation on the field explaining exactly what its purpose is and
> > > how/when it gets updated.
> >
> > I will let Clint chime in as the original author here, but from what
> > I can see this is basically a saved value of DDI_BUF_CTL(port), to be
> > written when appropriate. We have more than just
> > DDI_BUF_PORT_REVERSAL and DDI_A_4_LANES.
>
> I think you grepped the wrong tree. The output you pasted is where
> saved_port_bits is being used after this LNL series gets applied. The
> usage of this field on today's drm-tip is just:
>
> drivers/gpu/drm/i915/display/intel_cx0_phy.c:2706: bool lane_reversal = dig_port-
> >saved_port_bits & DDI_BUF_PORT_REVERSAL;
> drivers/gpu/drm/i915/display/intel_display_types.h:1827: u32 saved_port_bits;
> drivers/gpu/drm/i915/display/intel_tc.c:362: bool lane_reversal = dig_port-
> >saved_port_bits & DDI_BUF_PORT_REVERSAL;
> drivers/gpu/drm/i915/display/intel_ddi.c:333: intel_dp->DP = dig_port-
> >saved_port_bits |
> drivers/gpu/drm/i915/display/intel_ddi.c:2259: dig_port-
> >saved_port_bits & DDI_BUF_PORT_REVERSAL;
> drivers/gpu/drm/i915/display/intel_ddi.c:2389: if (dig_port->saved_port_bits &
> DDI_BUF_PORT_REVERSAL)
> drivers/gpu/drm/i915/display/intel_ddi.c:3214: buf_ctl = dig_port->saved_port_bits |
> DDI_BUF_CTL_ENABLE;
> drivers/gpu/drm/i915/display/intel_ddi.c:3221: if (dig_port->saved_port_bits
> & DDI_BUF_PORT_REVERSAL)
> drivers/gpu/drm/i915/display/intel_ddi.c:4505: if (dig_port->saved_port_bits &
> DDI_A_4_LANES)
> drivers/gpu/drm/i915/display/intel_ddi.c:4543: dig_port->saved_port_bits |=
> DDI_A_4_LANES;
> .--
> drivers/gpu/drm/i915/display/intel_ddi.c:4965: dig_port->saved_port_bits =
> drivers/gpu/drm/i915/display/intel_ddi.c
> -4966- intel_de_read(dev_priv, DDI_BUF_CTL(port))
> drivers/gpu/drm/i915/display/intel_ddi.c-4967- &
> DDI_BUF_PORT_REVERSAL;
> .--
> drivers/gpu/drm/i915/display/intel_ddi.c:4969: dig_port->saved_port_bits =
> drivers/gpu/drm/i915/display/intel_ddi.c
> -4970- intel_de_read(dev_priv, DDI_BUF_CTL(port))
> drivers/gpu/drm/i915/display/intel_ddi.c-4971- &
> (DDI_BUF_PORT_REVERSAL | DDI_A_4_LANES);
> .--
> drivers/gpu/drm/i915/display/intel_ddi.c:4974: dig_port->saved_port_bits |=
> DDI_BUF_PORT_REVERSAL;
>
> I.e., using it as a cached copy of DDI_BUF_CTL is a large change from
> the existing code; previously it was an unchanging stash of just those
> two specific bits from startup-time.
>
> I'm not saying that it's wrong to make that change, just that we're
> using it for a completely different purpose from today's drm-tip so I
> think we need to document that carefully and make it clear what the
> intended new usage is.
>
DRM-TIP uses intel_dp->DP for caching DDI_BUF_CTL for display port encoders and
saved_port_bits for caching DDI_BUF_CTL on HDMI encoders. This change consolidates both
encoder types to use saved_port_bits only.
from drm-tip: intel_de_write(dev_priv, DDI_BUF_CTL(port), intel_dp->DP);
-Clint
>
> Matt
>
> > drivers/gpu/drm/i915/display/intel_cx0_phy.c: bool lane_reversal = dig_port-
> > >saved_port_bits & DDI_BUF_PORT_REVERSAL;
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits |=
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port-
> > >saved_port_bits |= DDI_BUF_PORT_DATA_40BIT;
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port-
> > >saved_port_bits |= DDI_BUF_PORT_DATA_10BIT;
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits |=
> > ddi_buf_phy_link_rate(crtc_state->port_clock);
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port-
> > >saved_port_bits |= DDI_BUF_CTL_TC_PHY_OWNERSHIP;
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits &=
> > ~DDI_BUF_EMP_MASK;
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits |=
> > signal_levels;
> > drivers/gpu/drm/i915/display/intel_ddi.c: intel_de_write(dev_priv,
> > DDI_BUF_CTL(port), dig_port->saved_port_bits);
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port-
> > >saved_port_bits & DDI_BUF_PORT_REVERSAL;
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits |=
> > XE2LPD_DDI_BUF_D2D_LINK_ENABLE;
> > drivers/gpu/drm/i915/display/intel_ddi.c: if (dig_port->saved_port_bits &
> > DDI_BUF_PORT_REVERSAL)
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits &=
> > ~XE2LPD_DDI_BUF_D2D_LINK_ENABLE;
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits |=
> > DDI_BUF_CTL_ENABLE;
> > drivers/gpu/drm/i915/display/intel_ddi.c: if (dig_port->saved_port_bits
> > & DDI_BUF_PORT_REVERSAL)
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits |=
> > DDI_PORT_WIDTH(lane_count);
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits |=
> > DDI_BUF_CTL_TC_PHY_OWNERSHIP;
> > drivers/gpu/drm/i915/display/intel_ddi.c: intel_de_write(dev_priv,
> > DDI_BUF_CTL(port), dig_port->saved_port_bits);
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits |=
> > DDI_BUF_CTL_ENABLE;
> > drivers/gpu/drm/i915/display/intel_ddi.c: intel_de_write(dev_priv,
> > DDI_BUF_CTL(port), dig_port->saved_port_bits);
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits |=
> > DDI_BUF_CTL_ENABLE;
> > drivers/gpu/drm/i915/display/intel_ddi.c: intel_de_write(dev_priv,
> > DDI_BUF_CTL(port), dig_port->saved_port_bits);
> > drivers/gpu/drm/i915/display/intel_ddi.c: if (dig_port->saved_port_bits &
> > DDI_A_4_LANES)
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits |=
> > DDI_A_4_LANES;
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits =
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits =
> > drivers/gpu/drm/i915/display/intel_ddi.c: dig_port->saved_port_bits |=
> > DDI_BUF_PORT_REVERSAL;
> > drivers/gpu/drm/i915/display/intel_display_types.h: u32 saved_port_bits;
> > drivers/gpu/drm/i915/display/intel_dp.c: dig_port->saved_port_bits =
> > intel_de_read(dev_priv, intel_dp->output_reg);
> > drivers/gpu/drm/i915/display/intel_tc.c: bool lane_reversal = dig_port-
> > >saved_port_bits & DDI_BUF_PORT_REVERSAL;
> >
> > Lucas De Marchi
> >
> > > > DDI_PORT_WIDTH(crtc_state->lane_count) |
> > > > DDI_BUF_TRANS_SELECT(0);
> > > >
> > > > if (DISPLAY_VER(i915) >= 14) {
> > > > if (intel_dp_is_uhbr(crtc_state))
> > > > - intel_dp->DP |= DDI_BUF_PORT_DATA_40BIT;
> > > > + dig_port->saved_port_bits |= DDI_BUF_PORT_DATA_40BIT;
> > > > else
> > > > - intel_dp->DP |= DDI_BUF_PORT_DATA_10BIT;
> > > > + dig_port->saved_port_bits |= DDI_BUF_PORT_DATA_10BIT;
> > > > }
> > > >
> > > > if (IS_ALDERLAKE_P(i915) && intel_phy_is_tc(i915, phy)) {
> > > > - intel_dp->DP |= ddi_buf_phy_link_rate(crtc_state->port_clock);
> > > > + dig_port->saved_port_bits |= ddi_buf_phy_link_rate(crtc_state-
> > > > >port_clock);
> > > > if (!intel_tc_port_in_tbt_alt_mode(dig_port))
> > > > - intel_dp->DP |= DDI_BUF_CTL_TC_PHY_OWNERSHIP;
> > > > + dig_port->saved_port_bits |= DDI_BUF_CTL_TC_PHY_OWNERSHIP;
> > > > }
> > > > }
> > > >
> > > > @@ -1450,7 +1449,7 @@ hsw_set_signal_levels(struct intel_encoder *encoder,
> > > > const struct intel_crtc_state *crtc_state)
> > > > {
> > > > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > > > - struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> > > > + struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
> > > > int level = intel_ddi_level(encoder, crtc_state, 0);
> > > > enum port port = encoder->port;
> > > > u32 signal_levels;
> > > > @@ -1467,10 +1466,10 @@ hsw_set_signal_levels(struct intel_encoder *encoder,
> > > > drm_dbg_kms(&dev_priv->drm, "Using signal levels %08x\n",
> > > > signal_levels);
> > > >
> > > > - intel_dp->DP &= ~DDI_BUF_EMP_MASK;
> > > > - intel_dp->DP |= signal_levels;
> > > > + dig_port->saved_port_bits &= ~DDI_BUF_EMP_MASK;
> > > > + dig_port->saved_port_bits |= signal_levels;
> > > >
> > > > - intel_de_write(dev_priv, DDI_BUF_CTL(port), intel_dp->DP);
> > > > + intel_de_write(dev_priv, DDI_BUF_CTL(port), dig_port->saved_port_bits);
> > > > intel_de_posting_read(dev_priv, DDI_BUF_CTL(port));
> > > > }
> > > >
> > > > @@ -3145,7 +3144,6 @@ static void intel_enable_ddi_hdmi(struct intel_atomic_state
> > > > *state,
> > > > struct drm_connector *connector = conn_state->connector;
> > > > enum port port = encoder->port;
> > > > enum phy phy = intel_port_to_phy(dev_priv, port);
> > > > - u32 buf_ctl;
> > > >
> > > > if (!intel_hdmi_handle_sink_scrambling(encoder, connector,
> > > > crtc_state-
> > > > >hdmi_high_tmds_clock_ratio,
> > > > @@ -3211,7 +3209,7 @@ static void intel_enable_ddi_hdmi(struct intel_atomic_state
> > > > *state,
> > > > * is filled with lane count, already set in the crtc_state.
> > > > * The same is required to be filled in PORT_BUF_CTL for C10/20 Phy.
> > > > */
> > > > - buf_ctl = dig_port->saved_port_bits | DDI_BUF_CTL_ENABLE;
> > > > + dig_port->saved_port_bits |= DDI_BUF_CTL_ENABLE;
> > > > if (DISPLAY_VER(dev_priv) >= 14) {
> > > > u8 lane_count = mtl_get_port_width(crtc_state->lane_count);
> > > > u32 port_buf = 0;
> > > > @@ -3224,13 +3222,13 @@ static void intel_enable_ddi_hdmi(struct
> > > > intel_atomic_state *state,
> > > > intel_de_rmw(dev_priv, XELPDP_PORT_BUF_CTL1(port),
> > > > XELPDP_PORT_WIDTH_MASK | XELPDP_PORT_REVERSAL,
> > > > port_buf);
> > > >
> > > > - buf_ctl |= DDI_PORT_WIDTH(lane_count);
> > > > + dig_port->saved_port_bits |= DDI_PORT_WIDTH(lane_count);
> > > > } else if (IS_ALDERLAKE_P(dev_priv) && intel_phy_is_tc(dev_priv, phy)) {
> > > > drm_WARN_ON(&dev_priv->drm,
> > > > !intel_tc_port_in_legacy_mode(dig_port));
> > > > - buf_ctl |= DDI_BUF_CTL_TC_PHY_OWNERSHIP;
> > > > + dig_port->saved_port_bits |= DDI_BUF_CTL_TC_PHY_OWNERSHIP;
> > > > }
> > > >
> > > > - intel_de_write(dev_priv, DDI_BUF_CTL(port), buf_ctl);
> > > > + intel_de_write(dev_priv, DDI_BUF_CTL(port), dig_port->saved_port_bits);
> > > >
> > > > intel_wait_ddi_buf_active(dev_priv, port);
> > > >
> > > > @@ -3448,8 +3446,8 @@ static void mtl_ddi_prepare_link_retrain(struct intel_dp
> > > > *intel_dp,
> > > > mtl_port_buf_ctl_program(encoder, crtc_state);
> > > >
> > > > /* 6.i Configure and enable DDI_CTL_DE to start sending valid data to port
> > > > slice */
> > > > - intel_dp->DP |= DDI_BUF_CTL_ENABLE;
> > > > - intel_de_write(dev_priv, DDI_BUF_CTL(port), intel_dp->DP);
> > > > + dig_port->saved_port_bits |= DDI_BUF_CTL_ENABLE;
> > > > + intel_de_write(dev_priv, DDI_BUF_CTL(port), dig_port->saved_port_bits);
> > > > intel_de_posting_read(dev_priv, DDI_BUF_CTL(port));
> > > >
> > > > /* 6.j Poll for PORT_BUF_CTL Idle Status == 0, timeout after 100 us */
> > > > @@ -3499,8 +3497,8 @@ static void intel_ddi_prepare_link_retrain(struct intel_dp
> > > > *intel_dp,
> > > > (intel_tc_port_in_dp_alt_mode(dig_port) ||
> > > > intel_tc_port_in_legacy_mode(dig_port)))
> > > > adlp_tbt_to_dp_alt_switch_wa(encoder);
> > > >
> > > > - intel_dp->DP |= DDI_BUF_CTL_ENABLE;
> > > > - intel_de_write(dev_priv, DDI_BUF_CTL(port), intel_dp->DP);
> > > > + dig_port->saved_port_bits |= DDI_BUF_CTL_ENABLE;
> > > > + intel_de_write(dev_priv, DDI_BUF_CTL(port), dig_port->saved_port_bits);
> > > > intel_de_posting_read(dev_priv, DDI_BUF_CTL(port));
> > > >
> > > > intel_wait_ddi_buf_active(dev_priv, port);
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> > > > b/drivers/gpu/drm/i915/display/intel_dp.c
> > > > index 189c5737e63a..2346cd32f5a7 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > > > @@ -6025,7 +6025,7 @@ intel_dp_init_connector(struct intel_digital_port *dig_port,
> > > > intel_dp->pps.active_pipe = INVALID_PIPE;
> > > >
> > > > /* Preserve the current hw state. */
> > > > - intel_dp->DP = intel_de_read(dev_priv, intel_dp->output_reg);
> > > > + dig_port->saved_port_bits = intel_de_read(dev_priv, intel_dp->output_reg);
> > >
> > > Isn't this going to potentially clobber the lane reversal setting we
> > > determined from the VBT near the beginning of intel_ddi_init()?
> > >
> > >
> > > Matt
> > >
> > > > intel_dp->attached_connector = intel_connector;
> > > >
> > > > if (_intel_dp_is_port_edp(dev_priv, intel_encoder->devdata, port)) {
> > > > --
> > > > 2.40.1
> > > >
> > >
> > > --
> > > Matt Roper
> > > Graphics Software Engineer
> > > Linux GPU Platform Enablement
> > > Intel Corporation
More information about the Intel-xe
mailing list