[PATCH v19 0/6] drm/xe/guc: Add GuC based register capture for error capture
Zhanjun Dong
zhanjun.dong at intel.com
Thu Sep 12 13:46:48 UTC 2024
Port GuC based register capture for error capture from i915 to Xe.
There are 3 parts inside:
. Prepare for capture registers
There is a bo create at guc ads init time, that is very early
and engine map is not ready, make it hard to calculate the
capture buffer size, new function created for worst case size
caluation. Other than that, this part basically follows the i915
design.
. Process capture notification message
Basically follows i915 design
. Sysfs command process.
Xe switched to devcoredump, adopted command line process with
captured node list.
Signed-off-by: Zhanjun Dong <zhanjun.dong at intel.com>
Cc: Alan Previn <alan.previn.teres.alexis at intel.com>
Changes from prior revs:
v19:- Avoid remove of locked node
v18:- Bug fix of steering needed bit not set for steering register
Move SFC_DONE register list insertion to patch 1.
Buf fix of missing engine class to guc class conversion
Split plumbing GuC capture patch into 2 patches
Add matched_node pointer to remember the node, reduce search
for node rate
v17:- Update steering register condition check to check if current gt has
rcs/ccs engine.
Add additional null check
Rollback patch #3, take back RB
v16:- Switch to single list of capture register define, remove MMIO registers
from snapshot structure.
Seperate register capture list for legacy GPUs
Rewrite 64bit register support method, add field to indicate hi/low
dword of 64 bit or a single 32 bit register
Update the wrost size calculation method
v15:- Optimized guc log size code, remove the unnecessary init structure.
Fix a rebase line number alignment error
v14:- Fixed ring buffer wrap around offset issue
v13:- Move guc_mmio_reg structure define to guc_capture_abi.h
Remove duplicated crash/debug/capture unit check
Remove unnecessary guc_capture_data_extracted
Update u32 align check in guc_capture_log_remove_bytes
v12:- Rewrite guc log size init from runtime to compile time implementation.
Change log buffer flush to file from structure bitfield to genmask.
Change the capture log data copy from u32 copy to size copy
There are 3 types of engine class refrenced in this series, hw engine
class, GuC class and GuC capture class, update function parameter type
to enum for easy to read.
Update macro names to follow GuC interface specification.
v11:- Fixed a bug of missing captured check on register snapshot pre-capture
Fixed kernel-doc warnings
v10:- Resync with updated job timed out follow
Add pre-capture by read from hw engine if GuC capture data is not
ready, the pre-captured data will be refereshed if GuC capture is
ready at later time.
Add xe_guc_capture_is_ready_for to check if GuC capture is ready
for a job.
Re-orgnize some header files to xe abi folder
Reduce some meesage level from warn/info to debug
Remove duplicated enum of GuC log type.
v9:- Merged snapshot register list into capture register lists
Optimized devcoredump timing to take snapshot after guc reset
Add global and engine class registers into capture list
Fixed bug of incorrect matching guc class id with guc capture class id
v8:- Reorgnize the order of patches
Change the capture size check from worst min size to worst size
Replace the kernel alloc with drm managed alloc
Replace the memcpy with xe_map_memcpy_from
Free GuC capture outlist as part of xe_devcoredump_free
v7:- Kconfig CONFIG_DRM_XE_CAPTURE_ERROR removed
v6:- Change hardcoded register snapshot fill to follow mapping tables
When capture is empty, take snapshot from engine
v5:- Split dss helper code out as an standalone patch
Remove old platform registers definition.
Split register map table to 32 and 64bit each
v4:- Move register map table to xe_hw_engine.c
v3:- Remove condition compilation in code
v2:- Split into multiple chunks
Zhanjun Dong (6):
drm/xe/guc: Prepare GuC register list and update ADS size for error
capture
drm/xe/guc: Add XE_LP steered register lists
drm/xe/guc: Add capture size check in GuC log buffer
drm/xe/guc: Extract GuC error capture lists
drm/xe/guc: Plumb GuC-capture into dev coredump
drm/xe/guc: Save manual engine capture into capture list
drivers/gpu/drm/xe/Makefile | 1 +
drivers/gpu/drm/xe/abi/guc_actions_abi.h | 8 +
drivers/gpu/drm/xe/abi/guc_capture_abi.h | 186 ++
drivers/gpu/drm/xe/abi/guc_log_abi.h | 75 +
drivers/gpu/drm/xe/regs/xe_gt_regs.h | 2 +
drivers/gpu/drm/xe/xe_devcoredump.c | 20 +-
drivers/gpu/drm/xe/xe_devcoredump_types.h | 8 +
drivers/gpu/drm/xe/xe_gt_mcr.c | 13 +
drivers/gpu/drm/xe/xe_gt_mcr.h | 1 +
drivers/gpu/drm/xe/xe_guc.c | 5 +
drivers/gpu/drm/xe/xe_guc.h | 5 +
drivers/gpu/drm/xe/xe_guc_ads.c | 157 +-
drivers/gpu/drm/xe/xe_guc_ads_types.h | 2 +
drivers/gpu/drm/xe/xe_guc_capture.c | 1938 +++++++++++++++++++++
drivers/gpu/drm/xe/xe_guc_capture.h | 61 +
drivers/gpu/drm/xe/xe_guc_capture_types.h | 68 +
drivers/gpu/drm/xe/xe_guc_ct.c | 2 +
drivers/gpu/drm/xe/xe_guc_fwif.h | 26 +-
drivers/gpu/drm/xe/xe_guc_log.c | 101 ++
drivers/gpu/drm/xe/xe_guc_log.h | 10 +-
drivers/gpu/drm/xe/xe_guc_log_types.h | 7 +
drivers/gpu/drm/xe/xe_guc_submit.c | 83 +-
drivers/gpu/drm/xe/xe_guc_submit.h | 2 +
drivers/gpu/drm/xe/xe_guc_types.h | 2 +
drivers/gpu/drm/xe/xe_hw_engine.c | 250 +--
drivers/gpu/drm/xe/xe_hw_engine.h | 6 +-
drivers/gpu/drm/xe/xe_hw_engine_types.h | 66 +-
drivers/gpu/drm/xe/xe_lrc.c | 18 -
drivers/gpu/drm/xe/xe_lrc.h | 19 +-
29 files changed, 2763 insertions(+), 379 deletions(-)
create mode 100644 drivers/gpu/drm/xe/abi/guc_capture_abi.h
create mode 100644 drivers/gpu/drm/xe/abi/guc_log_abi.h
create mode 100644 drivers/gpu/drm/xe/xe_guc_capture.c
create mode 100644 drivers/gpu/drm/xe/xe_guc_capture.h
create mode 100644 drivers/gpu/drm/xe/xe_guc_capture_types.h
--
2.34.1
More information about the Intel-xe
mailing list