[PATCH 1/4] drm/i915/vbt: split up DSI VBT defs to a separate file
Kandpal, Suraj
suraj.kandpal at intel.com
Tue Aug 12 03:22:48 UTC 2025
> Subject: [PATCH 1/4] drm/i915/vbt: split up DSI VBT defs to a separate file
>
> The DSI VBT definitions have ended up in intel_bios.h, because intel_vbt_defs.h
> is supposed to be internal to intel_bios.c, but the DSI VBT definitions are
> needed in more places.
>
> Split out the DSI VBT definitions to intel_dsi_vbt_defs.h. This will also help keep
> the definitions in sync with IGT.
>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
LGTM,
Reviewed-by: Suraj Kandpal <suraj.kandpal at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_bios.h | 174 -----------------
> .../drm/i915/display/intel_display_types.h | 1 +
> .../gpu/drm/i915/display/intel_dsi_vbt_defs.h | 183 ++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_vbt_defs.h | 2 +-
> 4 files changed, 185 insertions(+), 175 deletions(-) create mode 100644
> drivers/gpu/drm/i915/display/intel_dsi_vbt_defs.h
>
> diff --git a/drivers/gpu/drm/i915/display/intel_bios.h
> b/drivers/gpu/drm/i915/display/intel_bios.h
> index 6cd7a011b8c4..8fdde85f7939 100644
> --- a/drivers/gpu/drm/i915/display/intel_bios.h
> +++ b/drivers/gpu/drm/i915/display/intel_bios.h
> @@ -50,180 +50,6 @@ enum intel_backlight_type {
> INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE,
> };
>
> -/*
> - * MIPI Sequence Block definitions
> - *
> - * Note the VBT spec has AssertReset / DeassertReset swapped from their
> - * usual naming, we use the proper names here to avoid confusion when
> - * reading the code.
> - */
> -enum mipi_seq {
> - MIPI_SEQ_END = 0,
> - MIPI_SEQ_DEASSERT_RESET, /* Spec says MipiAssertResetPin */
> - MIPI_SEQ_INIT_OTP,
> - MIPI_SEQ_DISPLAY_ON,
> - MIPI_SEQ_DISPLAY_OFF,
> - MIPI_SEQ_ASSERT_RESET, /* Spec says
> MipiDeassertResetPin */
> - MIPI_SEQ_BACKLIGHT_ON, /* sequence block v2+ */
> - MIPI_SEQ_BACKLIGHT_OFF, /* sequence block v2+ */
> - MIPI_SEQ_TEAR_ON, /* sequence block v2+ */
> - MIPI_SEQ_TEAR_OFF, /* sequence block v3+ */
> - MIPI_SEQ_POWER_ON, /* sequence block v3+ */
> - MIPI_SEQ_POWER_OFF, /* sequence block v3+ */
> - MIPI_SEQ_MAX
> -};
> -
> -enum mipi_seq_element {
> - MIPI_SEQ_ELEM_END = 0,
> - MIPI_SEQ_ELEM_SEND_PKT,
> - MIPI_SEQ_ELEM_DELAY,
> - MIPI_SEQ_ELEM_GPIO,
> - MIPI_SEQ_ELEM_I2C, /* sequence block v2+ */
> - MIPI_SEQ_ELEM_SPI, /* sequence block v3+ */
> - MIPI_SEQ_ELEM_PMIC, /* sequence block v3+ */
> - MIPI_SEQ_ELEM_MAX
> -};
> -
> -#define MIPI_DSI_UNDEFINED_PANEL_ID 0
> -#define MIPI_DSI_GENERIC_PANEL_ID 1
> -
> -struct mipi_config {
> - u16 panel_id;
> -
> - /* General Params */
> - u32 enable_dithering:1;
> - u32 rsvd1:1;
> - u32 is_bridge:1;
> -
> - u32 panel_arch_type:2;
> - u32 is_cmd_mode:1;
> -
> -#define NON_BURST_SYNC_PULSE 0x1
> -#define NON_BURST_SYNC_EVENTS 0x2
> -#define BURST_MODE 0x3
> - u32 video_transfer_mode:2;
> -
> - u32 cabc_supported:1;
> -#define PPS_BLC_PMIC 0
> -#define PPS_BLC_SOC 1
> - u32 pwm_blc:1;
> -
> - /* Bit 13:10 */
> -#define PIXEL_FORMAT_RGB565 0x1
> -#define PIXEL_FORMAT_RGB666 0x2
> -#define PIXEL_FORMAT_RGB666_LOOSELY_PACKED 0x3
> -#define PIXEL_FORMAT_RGB888 0x4
> - u32 videomode_color_format:4;
> -
> - /* Bit 15:14 */
> -#define ENABLE_ROTATION_0 0x0
> -#define ENABLE_ROTATION_90 0x1
> -#define ENABLE_ROTATION_180 0x2
> -#define ENABLE_ROTATION_270 0x3
> - u32 rotation:2;
> - u32 bta_enabled:1;
> - u32 rsvd2:15;
> -
> - /* 2 byte Port Description */
> -#define DUAL_LINK_NOT_SUPPORTED 0
> -#define DUAL_LINK_FRONT_BACK 1
> -#define DUAL_LINK_PIXEL_ALT 2
> - u16 dual_link:2;
> - u16 lane_cnt:2;
> - u16 pixel_overlap:3;
> - u16 rgb_flip:1;
> -#define DL_DCS_PORT_A 0x00
> -#define DL_DCS_PORT_C 0x01
> -#define DL_DCS_PORT_A_AND_C 0x02
> - u16 dl_dcs_cabc_ports:2;
> - u16 dl_dcs_backlight_ports:2;
> - u16 rsvd3:4;
> -
> - u16 rsvd4;
> -
> - u8 rsvd5;
> - u32 target_burst_mode_freq;
> - u32 dsi_ddr_clk;
> - u32 bridge_ref_clk;
> -
> -#define BYTE_CLK_SEL_20MHZ 0
> -#define BYTE_CLK_SEL_10MHZ 1
> -#define BYTE_CLK_SEL_5MHZ 2
> - u8 byte_clk_sel:2;
> -
> - u8 rsvd6:6;
> -
> - /* DPHY Flags */
> - u16 dphy_param_valid:1;
> - u16 eot_pkt_disabled:1;
> - u16 enable_clk_stop:1;
> - u16 rsvd7:13;
> -
> - u32 hs_tx_timeout;
> - u32 lp_rx_timeout;
> - u32 turn_around_timeout;
> - u32 device_reset_timer;
> - u32 master_init_timer;
> - u32 dbi_bw_timer;
> - u32 lp_byte_clk_val;
> -
> - /* 4 byte Dphy Params */
> - u32 prepare_cnt:6;
> - u32 rsvd8:2;
> - u32 clk_zero_cnt:8;
> - u32 trail_cnt:5;
> - u32 rsvd9:3;
> - u32 exit_zero_cnt:6;
> - u32 rsvd10:2;
> -
> - u32 clk_lane_switch_cnt;
> - u32 hl_switch_cnt;
> -
> - u32 rsvd11[6];
> -
> - /* timings based on dphy spec */
> - u8 tclk_miss;
> - u8 tclk_post;
> - u8 rsvd12;
> - u8 tclk_pre;
> - u8 tclk_prepare;
> - u8 tclk_settle;
> - u8 tclk_term_enable;
> - u8 tclk_trail;
> - u16 tclk_prepare_clkzero;
> - u8 rsvd13;
> - u8 td_term_enable;
> - u8 teot;
> - u8 ths_exit;
> - u8 ths_prepare;
> - u16 ths_prepare_hszero;
> - u8 rsvd14;
> - u8 ths_settle;
> - u8 ths_skip;
> - u8 ths_trail;
> - u8 tinit;
> - u8 tlpx;
> - u8 rsvd15[3];
> -
> - /* GPIOs */
> - u8 panel_enable;
> - u8 bl_enable;
> - u8 pwm_enable;
> - u8 reset_r_n;
> - u8 pwr_down_r;
> - u8 stdby_r_n;
> -
> -} __packed;
> -
> -/* all delays have a unit of 100us */
> -struct mipi_pps_data {
> - u16 panel_on_delay;
> - u16 bl_enable_delay;
> - u16 bl_disable_delay;
> - u16 panel_off_delay;
> - u16 panel_power_cycle_delay;
> -} __packed;
> -
> void intel_bios_init(struct intel_display *display); void
> intel_bios_init_panel_early(struct intel_display *display,
> struct intel_panel *panel,
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 35596f3921e8..0d945d1fedd6 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -50,6 +50,7 @@
> #include "intel_display_limits.h"
> #include "intel_display_power.h"
> #include "intel_dpll_mgr.h"
> +#include "intel_dsi_vbt_defs.h"
> #include "intel_wm_types.h"
>
> struct cec_notifier;
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt_defs.h
> b/drivers/gpu/drm/i915/display/intel_dsi_vbt_defs.h
> new file mode 100644
> index 000000000000..f83d42ed0c5a
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt_defs.h
> @@ -0,0 +1,183 @@
> +/* SPDX-License-Identifier: MIT */
> +/* Copyright © 2025 Intel Corporation */
> +
> +#ifndef __INTEL_DSI_VBT_DEFS_H__
> +#define __INTEL_DSI_VBT_DEFS_H__
> +
> +#include <linux/types.h>
> +
> +/*
> + * MIPI Sequence Block definitions
> + *
> + * Note the VBT spec has AssertReset / DeassertReset swapped from their
> + * usual naming, we use the proper names here to avoid confusion when
> + * reading the code.
> + */
> +enum mipi_seq {
> + MIPI_SEQ_END = 0,
> + MIPI_SEQ_DEASSERT_RESET, /* Spec says MipiAssertResetPin */
> + MIPI_SEQ_INIT_OTP,
> + MIPI_SEQ_DISPLAY_ON,
> + MIPI_SEQ_DISPLAY_OFF,
> + MIPI_SEQ_ASSERT_RESET, /* Spec says
> MipiDeassertResetPin */
> + MIPI_SEQ_BACKLIGHT_ON, /* sequence block v2+ */
> + MIPI_SEQ_BACKLIGHT_OFF, /* sequence block v2+ */
> + MIPI_SEQ_TEAR_ON, /* sequence block v2+ */
> + MIPI_SEQ_TEAR_OFF, /* sequence block v3+ */
> + MIPI_SEQ_POWER_ON, /* sequence block v3+ */
> + MIPI_SEQ_POWER_OFF, /* sequence block v3+ */
> + MIPI_SEQ_MAX
> +};
> +
> +enum mipi_seq_element {
> + MIPI_SEQ_ELEM_END = 0,
> + MIPI_SEQ_ELEM_SEND_PKT,
> + MIPI_SEQ_ELEM_DELAY,
> + MIPI_SEQ_ELEM_GPIO,
> + MIPI_SEQ_ELEM_I2C, /* sequence block v2+ */
> + MIPI_SEQ_ELEM_SPI, /* sequence block v3+ */
> + MIPI_SEQ_ELEM_PMIC, /* sequence block v3+ */
> + MIPI_SEQ_ELEM_MAX
> +};
> +
> +#define MIPI_DSI_UNDEFINED_PANEL_ID 0
> +#define MIPI_DSI_GENERIC_PANEL_ID 1
> +
> +struct mipi_config {
> + u16 panel_id;
> +
> + /* General Params */
> + u32 enable_dithering:1;
> + u32 rsvd1:1;
> + u32 is_bridge:1;
> +
> + u32 panel_arch_type:2;
> + u32 is_cmd_mode:1;
> +
> +#define NON_BURST_SYNC_PULSE 0x1
> +#define NON_BURST_SYNC_EVENTS 0x2
> +#define BURST_MODE 0x3
> + u32 video_transfer_mode:2;
> +
> + u32 cabc_supported:1;
> +#define PPS_BLC_PMIC 0
> +#define PPS_BLC_SOC 1
> + u32 pwm_blc:1;
> +
> + /* Bit 13:10 */
> +#define PIXEL_FORMAT_RGB565 0x1
> +#define PIXEL_FORMAT_RGB666 0x2
> +#define PIXEL_FORMAT_RGB666_LOOSELY_PACKED 0x3
> +#define PIXEL_FORMAT_RGB888 0x4
> + u32 videomode_color_format:4;
> +
> + /* Bit 15:14 */
> +#define ENABLE_ROTATION_0 0x0
> +#define ENABLE_ROTATION_90 0x1
> +#define ENABLE_ROTATION_180 0x2
> +#define ENABLE_ROTATION_270 0x3
> + u32 rotation:2;
> + u32 bta_enabled:1;
> + u32 rsvd2:15;
> +
> + /* 2 byte Port Description */
> +#define DUAL_LINK_NOT_SUPPORTED 0
> +#define DUAL_LINK_FRONT_BACK 1
> +#define DUAL_LINK_PIXEL_ALT 2
> + u16 dual_link:2;
> + u16 lane_cnt:2;
> + u16 pixel_overlap:3;
> + u16 rgb_flip:1;
> +#define DL_DCS_PORT_A 0x00
> +#define DL_DCS_PORT_C 0x01
> +#define DL_DCS_PORT_A_AND_C 0x02
> + u16 dl_dcs_cabc_ports:2;
> + u16 dl_dcs_backlight_ports:2;
> + u16 rsvd3:4;
> +
> + u16 rsvd4;
> +
> + u8 rsvd5;
> + u32 target_burst_mode_freq;
> + u32 dsi_ddr_clk;
> + u32 bridge_ref_clk;
> +
> +#define BYTE_CLK_SEL_20MHZ 0
> +#define BYTE_CLK_SEL_10MHZ 1
> +#define BYTE_CLK_SEL_5MHZ 2
> + u8 byte_clk_sel:2;
> +
> + u8 rsvd6:6;
> +
> + /* DPHY Flags */
> + u16 dphy_param_valid:1;
> + u16 eot_pkt_disabled:1;
> + u16 enable_clk_stop:1;
> + u16 rsvd7:13;
> +
> + u32 hs_tx_timeout;
> + u32 lp_rx_timeout;
> + u32 turn_around_timeout;
> + u32 device_reset_timer;
> + u32 master_init_timer;
> + u32 dbi_bw_timer;
> + u32 lp_byte_clk_val;
> +
> + /* 4 byte Dphy Params */
> + u32 prepare_cnt:6;
> + u32 rsvd8:2;
> + u32 clk_zero_cnt:8;
> + u32 trail_cnt:5;
> + u32 rsvd9:3;
> + u32 exit_zero_cnt:6;
> + u32 rsvd10:2;
> +
> + u32 clk_lane_switch_cnt;
> + u32 hl_switch_cnt;
> +
> + u32 rsvd11[6];
> +
> + /* timings based on dphy spec */
> + u8 tclk_miss;
> + u8 tclk_post;
> + u8 rsvd12;
> + u8 tclk_pre;
> + u8 tclk_prepare;
> + u8 tclk_settle;
> + u8 tclk_term_enable;
> + u8 tclk_trail;
> + u16 tclk_prepare_clkzero;
> + u8 rsvd13;
> + u8 td_term_enable;
> + u8 teot;
> + u8 ths_exit;
> + u8 ths_prepare;
> + u16 ths_prepare_hszero;
> + u8 rsvd14;
> + u8 ths_settle;
> + u8 ths_skip;
> + u8 ths_trail;
> + u8 tinit;
> + u8 tlpx;
> + u8 rsvd15[3];
> +
> + /* GPIOs */
> + u8 panel_enable;
> + u8 bl_enable;
> + u8 pwm_enable;
> + u8 reset_r_n;
> + u8 pwr_down_r;
> + u8 stdby_r_n;
> +
> +} __packed;
> +
> +/* all delays have a unit of 100us */
> +struct mipi_pps_data {
> + u16 panel_on_delay;
> + u16 bl_enable_delay;
> + u16 bl_disable_delay;
> + u16 panel_off_delay;
> + u16 panel_power_cycle_delay;
> +} __packed;
> +
> +#endif /* __INTEL_DSI_VBT_DEFS_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_vbt_defs.h
> b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
> index 92c04811aa28..6612d3a4ec49 100644
> --- a/drivers/gpu/drm/i915/display/intel_vbt_defs.h
> +++ b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
> @@ -37,7 +37,7 @@
> #ifndef _INTEL_VBT_DEFS_H_
> #define _INTEL_VBT_DEFS_H_
>
> -#include "intel_bios.h"
> +#include "intel_dsi_vbt_defs.h"
>
> /* EDID derived structures */
> struct bdb_edid_pnp_id {
> --
> 2.47.2
More information about the Intel-xe
mailing list