[PATCH 1/4] drm/i915/vbt: split up DSI VBT defs to a separate file
Jani Nikula
jani.nikula at intel.com
Tue Aug 12 08:59:56 UTC 2025
On Tue, 12 Aug 2025, "Kandpal, Suraj" <suraj.kandpal at intel.com> wrote:
>> Subject: [PATCH 1/4] drm/i915/vbt: split up DSI VBT defs to a separate file
>>
>> The DSI VBT definitions have ended up in intel_bios.h, because intel_vbt_defs.h
>> is supposed to be internal to intel_bios.c, but the DSI VBT definitions are
>> needed in more places.
>>
>> Split out the DSI VBT definitions to intel_dsi_vbt_defs.h. This will also help keep
>> the definitions in sync with IGT.
>>
>> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
>
> LGTM,
> Reviewed-by: Suraj Kandpal <suraj.kandpal at intel.com>
Thanks for the reviews, series pushed to din.
BR,
Jani.
>
>> ---
>> drivers/gpu/drm/i915/display/intel_bios.h | 174 -----------------
>> .../drm/i915/display/intel_display_types.h | 1 +
>> .../gpu/drm/i915/display/intel_dsi_vbt_defs.h | 183 ++++++++++++++++++
>> drivers/gpu/drm/i915/display/intel_vbt_defs.h | 2 +-
>> 4 files changed, 185 insertions(+), 175 deletions(-) create mode 100644
>> drivers/gpu/drm/i915/display/intel_dsi_vbt_defs.h
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_bios.h
>> b/drivers/gpu/drm/i915/display/intel_bios.h
>> index 6cd7a011b8c4..8fdde85f7939 100644
>> --- a/drivers/gpu/drm/i915/display/intel_bios.h
>> +++ b/drivers/gpu/drm/i915/display/intel_bios.h
>> @@ -50,180 +50,6 @@ enum intel_backlight_type {
>> INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE,
>> };
>>
>> -/*
>> - * MIPI Sequence Block definitions
>> - *
>> - * Note the VBT spec has AssertReset / DeassertReset swapped from their
>> - * usual naming, we use the proper names here to avoid confusion when
>> - * reading the code.
>> - */
>> -enum mipi_seq {
>> - MIPI_SEQ_END = 0,
>> - MIPI_SEQ_DEASSERT_RESET, /* Spec says MipiAssertResetPin */
>> - MIPI_SEQ_INIT_OTP,
>> - MIPI_SEQ_DISPLAY_ON,
>> - MIPI_SEQ_DISPLAY_OFF,
>> - MIPI_SEQ_ASSERT_RESET, /* Spec says
>> MipiDeassertResetPin */
>> - MIPI_SEQ_BACKLIGHT_ON, /* sequence block v2+ */
>> - MIPI_SEQ_BACKLIGHT_OFF, /* sequence block v2+ */
>> - MIPI_SEQ_TEAR_ON, /* sequence block v2+ */
>> - MIPI_SEQ_TEAR_OFF, /* sequence block v3+ */
>> - MIPI_SEQ_POWER_ON, /* sequence block v3+ */
>> - MIPI_SEQ_POWER_OFF, /* sequence block v3+ */
>> - MIPI_SEQ_MAX
>> -};
>> -
>> -enum mipi_seq_element {
>> - MIPI_SEQ_ELEM_END = 0,
>> - MIPI_SEQ_ELEM_SEND_PKT,
>> - MIPI_SEQ_ELEM_DELAY,
>> - MIPI_SEQ_ELEM_GPIO,
>> - MIPI_SEQ_ELEM_I2C, /* sequence block v2+ */
>> - MIPI_SEQ_ELEM_SPI, /* sequence block v3+ */
>> - MIPI_SEQ_ELEM_PMIC, /* sequence block v3+ */
>> - MIPI_SEQ_ELEM_MAX
>> -};
>> -
>> -#define MIPI_DSI_UNDEFINED_PANEL_ID 0
>> -#define MIPI_DSI_GENERIC_PANEL_ID 1
>> -
>> -struct mipi_config {
>> - u16 panel_id;
>> -
>> - /* General Params */
>> - u32 enable_dithering:1;
>> - u32 rsvd1:1;
>> - u32 is_bridge:1;
>> -
>> - u32 panel_arch_type:2;
>> - u32 is_cmd_mode:1;
>> -
>> -#define NON_BURST_SYNC_PULSE 0x1
>> -#define NON_BURST_SYNC_EVENTS 0x2
>> -#define BURST_MODE 0x3
>> - u32 video_transfer_mode:2;
>> -
>> - u32 cabc_supported:1;
>> -#define PPS_BLC_PMIC 0
>> -#define PPS_BLC_SOC 1
>> - u32 pwm_blc:1;
>> -
>> - /* Bit 13:10 */
>> -#define PIXEL_FORMAT_RGB565 0x1
>> -#define PIXEL_FORMAT_RGB666 0x2
>> -#define PIXEL_FORMAT_RGB666_LOOSELY_PACKED 0x3
>> -#define PIXEL_FORMAT_RGB888 0x4
>> - u32 videomode_color_format:4;
>> -
>> - /* Bit 15:14 */
>> -#define ENABLE_ROTATION_0 0x0
>> -#define ENABLE_ROTATION_90 0x1
>> -#define ENABLE_ROTATION_180 0x2
>> -#define ENABLE_ROTATION_270 0x3
>> - u32 rotation:2;
>> - u32 bta_enabled:1;
>> - u32 rsvd2:15;
>> -
>> - /* 2 byte Port Description */
>> -#define DUAL_LINK_NOT_SUPPORTED 0
>> -#define DUAL_LINK_FRONT_BACK 1
>> -#define DUAL_LINK_PIXEL_ALT 2
>> - u16 dual_link:2;
>> - u16 lane_cnt:2;
>> - u16 pixel_overlap:3;
>> - u16 rgb_flip:1;
>> -#define DL_DCS_PORT_A 0x00
>> -#define DL_DCS_PORT_C 0x01
>> -#define DL_DCS_PORT_A_AND_C 0x02
>> - u16 dl_dcs_cabc_ports:2;
>> - u16 dl_dcs_backlight_ports:2;
>> - u16 rsvd3:4;
>> -
>> - u16 rsvd4;
>> -
>> - u8 rsvd5;
>> - u32 target_burst_mode_freq;
>> - u32 dsi_ddr_clk;
>> - u32 bridge_ref_clk;
>> -
>> -#define BYTE_CLK_SEL_20MHZ 0
>> -#define BYTE_CLK_SEL_10MHZ 1
>> -#define BYTE_CLK_SEL_5MHZ 2
>> - u8 byte_clk_sel:2;
>> -
>> - u8 rsvd6:6;
>> -
>> - /* DPHY Flags */
>> - u16 dphy_param_valid:1;
>> - u16 eot_pkt_disabled:1;
>> - u16 enable_clk_stop:1;
>> - u16 rsvd7:13;
>> -
>> - u32 hs_tx_timeout;
>> - u32 lp_rx_timeout;
>> - u32 turn_around_timeout;
>> - u32 device_reset_timer;
>> - u32 master_init_timer;
>> - u32 dbi_bw_timer;
>> - u32 lp_byte_clk_val;
>> -
>> - /* 4 byte Dphy Params */
>> - u32 prepare_cnt:6;
>> - u32 rsvd8:2;
>> - u32 clk_zero_cnt:8;
>> - u32 trail_cnt:5;
>> - u32 rsvd9:3;
>> - u32 exit_zero_cnt:6;
>> - u32 rsvd10:2;
>> -
>> - u32 clk_lane_switch_cnt;
>> - u32 hl_switch_cnt;
>> -
>> - u32 rsvd11[6];
>> -
>> - /* timings based on dphy spec */
>> - u8 tclk_miss;
>> - u8 tclk_post;
>> - u8 rsvd12;
>> - u8 tclk_pre;
>> - u8 tclk_prepare;
>> - u8 tclk_settle;
>> - u8 tclk_term_enable;
>> - u8 tclk_trail;
>> - u16 tclk_prepare_clkzero;
>> - u8 rsvd13;
>> - u8 td_term_enable;
>> - u8 teot;
>> - u8 ths_exit;
>> - u8 ths_prepare;
>> - u16 ths_prepare_hszero;
>> - u8 rsvd14;
>> - u8 ths_settle;
>> - u8 ths_skip;
>> - u8 ths_trail;
>> - u8 tinit;
>> - u8 tlpx;
>> - u8 rsvd15[3];
>> -
>> - /* GPIOs */
>> - u8 panel_enable;
>> - u8 bl_enable;
>> - u8 pwm_enable;
>> - u8 reset_r_n;
>> - u8 pwr_down_r;
>> - u8 stdby_r_n;
>> -
>> -} __packed;
>> -
>> -/* all delays have a unit of 100us */
>> -struct mipi_pps_data {
>> - u16 panel_on_delay;
>> - u16 bl_enable_delay;
>> - u16 bl_disable_delay;
>> - u16 panel_off_delay;
>> - u16 panel_power_cycle_delay;
>> -} __packed;
>> -
>> void intel_bios_init(struct intel_display *display); void
>> intel_bios_init_panel_early(struct intel_display *display,
>> struct intel_panel *panel,
>> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
>> b/drivers/gpu/drm/i915/display/intel_display_types.h
>> index 35596f3921e8..0d945d1fedd6 100644
>> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
>> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
>> @@ -50,6 +50,7 @@
>> #include "intel_display_limits.h"
>> #include "intel_display_power.h"
>> #include "intel_dpll_mgr.h"
>> +#include "intel_dsi_vbt_defs.h"
>> #include "intel_wm_types.h"
>>
>> struct cec_notifier;
>> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt_defs.h
>> b/drivers/gpu/drm/i915/display/intel_dsi_vbt_defs.h
>> new file mode 100644
>> index 000000000000..f83d42ed0c5a
>> --- /dev/null
>> +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt_defs.h
>> @@ -0,0 +1,183 @@
>> +/* SPDX-License-Identifier: MIT */
>> +/* Copyright © 2025 Intel Corporation */
>> +
>> +#ifndef __INTEL_DSI_VBT_DEFS_H__
>> +#define __INTEL_DSI_VBT_DEFS_H__
>> +
>> +#include <linux/types.h>
>> +
>> +/*
>> + * MIPI Sequence Block definitions
>> + *
>> + * Note the VBT spec has AssertReset / DeassertReset swapped from their
>> + * usual naming, we use the proper names here to avoid confusion when
>> + * reading the code.
>> + */
>> +enum mipi_seq {
>> + MIPI_SEQ_END = 0,
>> + MIPI_SEQ_DEASSERT_RESET, /* Spec says MipiAssertResetPin */
>> + MIPI_SEQ_INIT_OTP,
>> + MIPI_SEQ_DISPLAY_ON,
>> + MIPI_SEQ_DISPLAY_OFF,
>> + MIPI_SEQ_ASSERT_RESET, /* Spec says
>> MipiDeassertResetPin */
>> + MIPI_SEQ_BACKLIGHT_ON, /* sequence block v2+ */
>> + MIPI_SEQ_BACKLIGHT_OFF, /* sequence block v2+ */
>> + MIPI_SEQ_TEAR_ON, /* sequence block v2+ */
>> + MIPI_SEQ_TEAR_OFF, /* sequence block v3+ */
>> + MIPI_SEQ_POWER_ON, /* sequence block v3+ */
>> + MIPI_SEQ_POWER_OFF, /* sequence block v3+ */
>> + MIPI_SEQ_MAX
>> +};
>> +
>> +enum mipi_seq_element {
>> + MIPI_SEQ_ELEM_END = 0,
>> + MIPI_SEQ_ELEM_SEND_PKT,
>> + MIPI_SEQ_ELEM_DELAY,
>> + MIPI_SEQ_ELEM_GPIO,
>> + MIPI_SEQ_ELEM_I2C, /* sequence block v2+ */
>> + MIPI_SEQ_ELEM_SPI, /* sequence block v3+ */
>> + MIPI_SEQ_ELEM_PMIC, /* sequence block v3+ */
>> + MIPI_SEQ_ELEM_MAX
>> +};
>> +
>> +#define MIPI_DSI_UNDEFINED_PANEL_ID 0
>> +#define MIPI_DSI_GENERIC_PANEL_ID 1
>> +
>> +struct mipi_config {
>> + u16 panel_id;
>> +
>> + /* General Params */
>> + u32 enable_dithering:1;
>> + u32 rsvd1:1;
>> + u32 is_bridge:1;
>> +
>> + u32 panel_arch_type:2;
>> + u32 is_cmd_mode:1;
>> +
>> +#define NON_BURST_SYNC_PULSE 0x1
>> +#define NON_BURST_SYNC_EVENTS 0x2
>> +#define BURST_MODE 0x3
>> + u32 video_transfer_mode:2;
>> +
>> + u32 cabc_supported:1;
>> +#define PPS_BLC_PMIC 0
>> +#define PPS_BLC_SOC 1
>> + u32 pwm_blc:1;
>> +
>> + /* Bit 13:10 */
>> +#define PIXEL_FORMAT_RGB565 0x1
>> +#define PIXEL_FORMAT_RGB666 0x2
>> +#define PIXEL_FORMAT_RGB666_LOOSELY_PACKED 0x3
>> +#define PIXEL_FORMAT_RGB888 0x4
>> + u32 videomode_color_format:4;
>> +
>> + /* Bit 15:14 */
>> +#define ENABLE_ROTATION_0 0x0
>> +#define ENABLE_ROTATION_90 0x1
>> +#define ENABLE_ROTATION_180 0x2
>> +#define ENABLE_ROTATION_270 0x3
>> + u32 rotation:2;
>> + u32 bta_enabled:1;
>> + u32 rsvd2:15;
>> +
>> + /* 2 byte Port Description */
>> +#define DUAL_LINK_NOT_SUPPORTED 0
>> +#define DUAL_LINK_FRONT_BACK 1
>> +#define DUAL_LINK_PIXEL_ALT 2
>> + u16 dual_link:2;
>> + u16 lane_cnt:2;
>> + u16 pixel_overlap:3;
>> + u16 rgb_flip:1;
>> +#define DL_DCS_PORT_A 0x00
>> +#define DL_DCS_PORT_C 0x01
>> +#define DL_DCS_PORT_A_AND_C 0x02
>> + u16 dl_dcs_cabc_ports:2;
>> + u16 dl_dcs_backlight_ports:2;
>> + u16 rsvd3:4;
>> +
>> + u16 rsvd4;
>> +
>> + u8 rsvd5;
>> + u32 target_burst_mode_freq;
>> + u32 dsi_ddr_clk;
>> + u32 bridge_ref_clk;
>> +
>> +#define BYTE_CLK_SEL_20MHZ 0
>> +#define BYTE_CLK_SEL_10MHZ 1
>> +#define BYTE_CLK_SEL_5MHZ 2
>> + u8 byte_clk_sel:2;
>> +
>> + u8 rsvd6:6;
>> +
>> + /* DPHY Flags */
>> + u16 dphy_param_valid:1;
>> + u16 eot_pkt_disabled:1;
>> + u16 enable_clk_stop:1;
>> + u16 rsvd7:13;
>> +
>> + u32 hs_tx_timeout;
>> + u32 lp_rx_timeout;
>> + u32 turn_around_timeout;
>> + u32 device_reset_timer;
>> + u32 master_init_timer;
>> + u32 dbi_bw_timer;
>> + u32 lp_byte_clk_val;
>> +
>> + /* 4 byte Dphy Params */
>> + u32 prepare_cnt:6;
>> + u32 rsvd8:2;
>> + u32 clk_zero_cnt:8;
>> + u32 trail_cnt:5;
>> + u32 rsvd9:3;
>> + u32 exit_zero_cnt:6;
>> + u32 rsvd10:2;
>> +
>> + u32 clk_lane_switch_cnt;
>> + u32 hl_switch_cnt;
>> +
>> + u32 rsvd11[6];
>> +
>> + /* timings based on dphy spec */
>> + u8 tclk_miss;
>> + u8 tclk_post;
>> + u8 rsvd12;
>> + u8 tclk_pre;
>> + u8 tclk_prepare;
>> + u8 tclk_settle;
>> + u8 tclk_term_enable;
>> + u8 tclk_trail;
>> + u16 tclk_prepare_clkzero;
>> + u8 rsvd13;
>> + u8 td_term_enable;
>> + u8 teot;
>> + u8 ths_exit;
>> + u8 ths_prepare;
>> + u16 ths_prepare_hszero;
>> + u8 rsvd14;
>> + u8 ths_settle;
>> + u8 ths_skip;
>> + u8 ths_trail;
>> + u8 tinit;
>> + u8 tlpx;
>> + u8 rsvd15[3];
>> +
>> + /* GPIOs */
>> + u8 panel_enable;
>> + u8 bl_enable;
>> + u8 pwm_enable;
>> + u8 reset_r_n;
>> + u8 pwr_down_r;
>> + u8 stdby_r_n;
>> +
>> +} __packed;
>> +
>> +/* all delays have a unit of 100us */
>> +struct mipi_pps_data {
>> + u16 panel_on_delay;
>> + u16 bl_enable_delay;
>> + u16 bl_disable_delay;
>> + u16 panel_off_delay;
>> + u16 panel_power_cycle_delay;
>> +} __packed;
>> +
>> +#endif /* __INTEL_DSI_VBT_DEFS_H__ */
>> diff --git a/drivers/gpu/drm/i915/display/intel_vbt_defs.h
>> b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
>> index 92c04811aa28..6612d3a4ec49 100644
>> --- a/drivers/gpu/drm/i915/display/intel_vbt_defs.h
>> +++ b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
>> @@ -37,7 +37,7 @@
>> #ifndef _INTEL_VBT_DEFS_H_
>> #define _INTEL_VBT_DEFS_H_
>>
>> -#include "intel_bios.h"
>> +#include "intel_dsi_vbt_defs.h"
>>
>> /* EDID derived structures */
>> struct bdb_edid_pnp_id {
>> --
>> 2.47.2
>
--
Jani Nikula, Intel
More information about the Intel-xe
mailing list