[PATCH v5 3/5] drm/xe/hwmon: Add support to manage PL2 though mailbox
Karthik Poosa
karthik.poosa at intel.com
Thu May 8 05:28:39 UTC 2025
Add support to manage power limit PL2 (burst limit) through
pcode mailbox commands.
v2:
- Update power1_cap definition in hwmon documentation. (Badal)
- Clamp PL2 power limit to BIOS default value.
v3:
- Activate the power label when either the PL1 or PL2 power
limit is enabled.
Signed-off-by: Karthik Poosa <karthik.poosa at intel.com>
---
.../ABI/testing/sysfs-driver-intel-xe-hwmon | 30 ++++++++
drivers/gpu/drm/xe/xe_hwmon.c | 74 ++++++++++++++-----
2 files changed, 84 insertions(+), 20 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
index 5a91dcccd3ac..dffd6443664a 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
@@ -148,3 +148,33 @@ Contact: intel-xe at lists.freedesktop.org
Description: RO. Fan 3 speed in RPM.
Only supported for particular Intel Xe graphics platforms.
+
+What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_cap
+Date: May 2025
+KernelVersion: 6.15
+Contact: intel-xe at lists.freedesktop.org
+Description: RW. Card burst (PL2) power limit in microwatts.
+
+ The power controller will throttle the operating frequency
+ if the power averaged over a window (typically milli seconds)
+ exceeds this limit. A read value of 0 means that the PL2
+ power limit is disabled, writing 0 disables the limit.
+ PL2 is greater than PL1 and its time window is lesser
+ compared to PL1.
+
+ Only supported for particular Intel Xe graphics platforms.
+
+What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power2_cap
+Date: May 2025
+KernelVersion: 6.15
+Contact: intel-xe at lists.freedesktop.org
+Description: RW. Package burst (PL2) power limit in microwatts.
+
+ The power controller will throttle the operating frequency
+ if the power averaged over a window (typically milli seconds)
+ exceeds this limit. A read value of 0 means that the PL2
+ power limit is disabled, writing 0 disables the limit.
+ PL2 is greater than PL1 and its time window is lesser
+ compared to PL1.
+
+ Only supported for particular Intel Xe graphics platforms.
diff --git a/drivers/gpu/drm/xe/xe_hwmon.c b/drivers/gpu/drm/xe/xe_hwmon.c
index 5ba800b35969..4de79b0d5c49 100644
--- a/drivers/gpu/drm/xe/xe_hwmon.c
+++ b/drivers/gpu/drm/xe/xe_hwmon.c
@@ -51,6 +51,14 @@ enum xe_fan_channel {
FAN_MAX,
};
+/* Attribute index for powerX_xxx_interval sysfs entries */
+enum sensor_attr_power {
+ SENSOR_INDEX_PSYS_PL1,
+ SENSOR_INDEX_PKG_PL1,
+ SENSOR_INDEX_PSYS_PL2,
+ SENSOR_INDEX_PKG_PL2,
+};
+
/*
* For platforms that support mailbox commands for power limits, REG_PKG_POWER_SKU_UNIT is
* not supported and below are SKU units to be used.
@@ -72,8 +80,9 @@ enum xe_fan_channel {
* PL*_HWMON_ATTR - mapping of hardware power limits to corresponding hwmon power attribute.
*/
#define PL1_HWMON_ATTR hwmon_power_max
+#define PL2_HWMON_ATTR hwmon_power_cap
-#define PWR_ATTR_TO_STR(attr) (((attr) == hwmon_power_max) ? "PL1" : "Invalid")
+#define PWR_ATTR_TO_STR(attr) (((attr) == hwmon_power_max) ? "PL1" : "PL2")
/*
* Timeout for power limit write mailbox command.
@@ -124,6 +133,9 @@ struct xe_hwmon {
bool boot_power_limit_read;
/** pl1_on_boot: power limit PL1 on boot */
u32 pl1_on_boot[CHANNEL_MAX];
+ /** pl2_on_boot: power limit PL2 on boot */
+ u32 pl2_on_boot[CHANNEL_MAX];
+
};
static int xe_hwmon_pcode_read_power_limit(const struct xe_hwmon *hwmon, u32 attr, int channel,
@@ -151,8 +163,10 @@ static int xe_hwmon_pcode_read_power_limit(const struct xe_hwmon *hwmon, u32 att
/* return the value only if limit is enabled */
if (attr == PL1_HWMON_ATTR)
*uval = (val0 & PWR_LIM_EN) ? val0 : 0;
+ else if (attr == PL2_HWMON_ATTR)
+ *uval = (val1 & PWR_LIM_EN) ? val1 : 0;
else if (attr == hwmon_power_label)
- *uval = (val0 & PWR_LIM_EN) ? 1 : 0;
+ *uval = (val0 & PWR_LIM_EN) ? 1 : (val1 & PWR_LIM_EN) ? 1 : 0;
else
*uval = 0;
@@ -180,6 +194,8 @@ static int xe_hwmon_pcode_write_power_limit(const struct xe_hwmon *hwmon, u32 at
if (attr == PL1_HWMON_ATTR)
val0 = uval;
+ else if (attr == PL2_HWMON_ATTR)
+ val1 = uval;
else
return -EIO;
@@ -328,7 +344,7 @@ static int xe_hwmon_power_max_write(struct xe_hwmon *hwmon, u32 attr, int channe
{
struct xe_mmio *mmio = xe_root_tile_mmio(hwmon->xe);
int ret = 0;
- u32 reg_val;
+ u32 reg_val, max;
struct xe_reg rapl_limit;
mutex_lock(&hwmon->hwmon_lock);
@@ -356,20 +372,24 @@ static int xe_hwmon_power_max_write(struct xe_hwmon *hwmon, u32 attr, int channe
/* Computation in 64-bits to avoid overflow. Round to nearest. */
reg_val = DIV_ROUND_CLOSEST_ULL((u64)value << hwmon->scl_shift_power, SF_POWER);
- reg_val = PWR_LIM_EN | REG_FIELD_PREP(PWR_LIM_VAL, reg_val);
/*
* Clamp power limit to card-firmware default as maximum, as an additional protection to
* pcode clamp.
*/
if (hwmon->xe->info.has_mbx_power_limits) {
- if (reg_val > REG_FIELD_GET(PWR_LIM_VAL, hwmon->pl1_on_boot[channel])) {
- reg_val = REG_FIELD_GET(PWR_LIM_VAL, hwmon->pl1_on_boot[channel]);
+ max = (attr == PL1_HWMON_ATTR) ?
+ hwmon->pl1_on_boot[channel] : hwmon->pl2_on_boot[channel];
+ max = REG_FIELD_PREP(PWR_LIM_VAL, max);
+ if (reg_val > max) {
+ reg_val = max;
drm_dbg(&hwmon->xe->drm, "Clamping power limit to firmware default 0x%x\n",
reg_val);
}
}
+ reg_val = PWR_LIM_EN | REG_FIELD_PREP(PWR_LIM_VAL, reg_val);
+
if (hwmon->xe->info.has_mbx_power_limits)
ret = xe_hwmon_pcode_write_power_limit(hwmon, attr, channel, reg_val);
else
@@ -453,8 +473,9 @@ xe_hwmon_power_max_interval_show(struct device *dev, struct device_attribute *at
struct xe_mmio *mmio = xe_root_tile_mmio(hwmon->xe);
u32 x, y, x_w = 2; /* 2 bits */
u64 r, tau4, out;
- int channel = to_sensor_dev_attr(attr)->index;
+ int channel = (to_sensor_dev_attr(attr)->index % 2) ? CHANNEL_PKG : CHANNEL_CARD;
u32 power_attr = PL1_HWMON_ATTR;
+
int ret = 0;
xe_pm_runtime_get(hwmon->xe);
@@ -507,9 +528,9 @@ xe_hwmon_power_max_interval_store(struct device *dev, struct device_attribute *a
u32 x, y, rxy, x_w = 2; /* 2 bits */
u64 tau4, r, max_win;
unsigned long val;
- int ret;
- int channel = to_sensor_dev_attr(attr)->index;
+ int channel = (to_sensor_dev_attr(attr)->index % 2) ? CHANNEL_PKG : CHANNEL_CARD;
u32 power_attr = PL1_HWMON_ATTR;
+ int ret;
ret = kstrtoul(buf, 0, &val);
if (ret)
@@ -587,11 +608,11 @@ xe_hwmon_power_max_interval_store(struct device *dev, struct device_attribute *a
/* PSYS PL1 */
static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
xe_hwmon_power_max_interval_show,
- xe_hwmon_power_max_interval_store, CHANNEL_CARD);
-
+ xe_hwmon_power_max_interval_store, SENSOR_INDEX_PSYS_PL1);
+/* PKG PL1 */
static SENSOR_DEVICE_ATTR(power2_max_interval, 0664,
xe_hwmon_power_max_interval_show,
- xe_hwmon_power_max_interval_store, CHANNEL_PKG);
+ xe_hwmon_power_max_interval_store, SENSOR_INDEX_PKG_PL1);
static struct attribute *hwmon_attributes[] = {
&sensor_dev_attr_power1_max_interval.dev_attr.attr,
@@ -605,7 +626,7 @@ static umode_t xe_hwmon_attributes_visible(struct kobject *kobj,
struct device *dev = kobj_to_dev(kobj);
struct xe_hwmon *hwmon = dev_get_drvdata(dev);
int ret = 0;
- int channel = index ? CHANNEL_PKG : CHANNEL_CARD;
+ int channel = (index % 2) ? CHANNEL_PKG : CHANNEL_CARD;
u32 power_attr = PL1_HWMON_ATTR;
u32 uval;
@@ -637,8 +658,9 @@ static const struct attribute_group *hwmon_groups[] = {
static const struct hwmon_channel_info * const hwmon_info[] = {
HWMON_CHANNEL_INFO(temp, HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL),
- HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_LABEL | HWMON_P_CRIT,
- HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_LABEL),
+ HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_LABEL | HWMON_P_CRIT |
+ HWMON_P_CAP,
+ HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_LABEL | HWMON_P_CAP),
HWMON_CHANNEL_INFO(curr, HWMON_C_LABEL, HWMON_C_CRIT | HWMON_C_LABEL),
HWMON_CHANNEL_INFO(in, HWMON_I_INPUT | HWMON_I_LABEL, HWMON_I_INPUT | HWMON_I_LABEL),
HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT | HWMON_E_LABEL, HWMON_E_INPUT | HWMON_E_LABEL),
@@ -763,9 +785,11 @@ xe_hwmon_power_is_visible(struct xe_hwmon *hwmon, u32 attr, int channel)
switch (attr) {
case hwmon_power_max:
+ case hwmon_power_cap:
+ case hwmon_power_label:
if (hwmon->xe->info.has_mbx_power_limits) {
xe_hwmon_pcode_read_power_limit(hwmon, attr, channel, &uval);
- return (uval) ? 0664 : 0;
+ return (uval) ? (attr == hwmon_power_label) ? 0444 : 0664 : 0;
} else {
return xe_reg_is_valid(xe_hwmon_get_reg(hwmon, REG_PKG_RAPL_LIMIT,
channel)) ? 0664 : 0;
@@ -777,11 +801,9 @@ xe_hwmon_power_is_visible(struct xe_hwmon *hwmon, u32 attr, int channel)
return xe_reg_is_valid(xe_hwmon_get_reg(hwmon, REG_PKG_POWER_SKU,
channel)) ? 0444 : 0;
case hwmon_power_crit:
- case hwmon_power_label:
if (channel == CHANNEL_CARD) {
xe_hwmon_pcode_read_i1(hwmon, &uval);
- return (uval & POWER_SETUP_I1_WATTS) ? (attr == hwmon_power_label) ?
- 0444 : 0644 : 0;
+ return (uval & POWER_SETUP_I1_WATTS) ? 0644 : 0;
}
break;
default:
@@ -795,6 +817,7 @@ xe_hwmon_power_read(struct xe_hwmon *hwmon, u32 attr, int channel, long *val)
{
switch (attr) {
case hwmon_power_max:
+ case hwmon_power_cap:
xe_hwmon_power_max_read(hwmon, attr, channel, val);
return 0;
case hwmon_power_rated_max:
@@ -811,6 +834,7 @@ static int
xe_hwmon_power_write(struct xe_hwmon *hwmon, u32 attr, int channel, long val)
{
switch (attr) {
+ case hwmon_power_cap:
case hwmon_power_max:
return xe_hwmon_power_max_write(hwmon, attr, channel, val);
case hwmon_power_crit:
@@ -1137,7 +1161,11 @@ xe_hwmon_get_preregistration_info(struct xe_hwmon *hwmon)
if (xe_hwmon_pcode_read_power_limit(hwmon, PL1_HWMON_ATTR, CHANNEL_CARD,
&hwmon->pl1_on_boot[CHANNEL_CARD]) |
xe_hwmon_pcode_read_power_limit(hwmon, PL1_HWMON_ATTR, CHANNEL_PKG,
- &hwmon->pl1_on_boot[CHANNEL_PKG])) {
+ &hwmon->pl1_on_boot[CHANNEL_PKG]) |
+ xe_hwmon_pcode_read_power_limit(hwmon, PL2_HWMON_ATTR, CHANNEL_CARD,
+ &hwmon->pl2_on_boot[CHANNEL_CARD]) |
+ xe_hwmon_pcode_read_power_limit(hwmon, PL1_HWMON_ATTR, CHANNEL_PKG,
+ &hwmon->pl2_on_boot[CHANNEL_PKG])) {
drm_warn(&hwmon->xe->drm,
"Failed to read power limits, check card firmware !\n");
} else {
@@ -1149,6 +1177,12 @@ xe_hwmon_get_preregistration_info(struct xe_hwmon *hwmon)
xe_hwmon_pcode_write_power_limit(hwmon, PL1_HWMON_ATTR,
CHANNEL_PKG,
hwmon->pl1_on_boot[CHANNEL_PKG]);
+ xe_hwmon_pcode_write_power_limit(hwmon, PL2_HWMON_ATTR,
+ CHANNEL_CARD,
+ hwmon->pl2_on_boot[CHANNEL_CARD]);
+ xe_hwmon_pcode_write_power_limit(hwmon, PL2_HWMON_ATTR,
+ CHANNEL_PKG,
+ hwmon->pl2_on_boot[CHANNEL_PKG]);
hwmon->scl_shift_power = PWR_UNIT;
hwmon->scl_shift_energy = ENERGY_UNIT;
hwmon->scl_shift_time = TIME_UNIT;
--
2.25.1
More information about the Intel-xe
mailing list