May 2025 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu May 1 01:25:45 UTC 2025
Ending: Sat May 10 07:48:16 UTC 2025
Messages: 1098

• [PATCH] drm/xe: Make the gem shrinker drm managed   Matthew Auld
• [PATCH] drm/xe/xe2hpg: Add Wa_22021007897   Aradhya Bhatia
• [PATCH v2] drm/xe/xe2hpg: Add Wa_22021007897   Aradhya Bhatia
• Re: ✗ Xe.CI.Full: failure for drm/xe/xe2hpg: Add Wa_22021007897 (rev2)   Aradhya Bhatia
• [PATCH v2 0/3] drm/i915/display: remove intel_de_*() compat wrappers   Borah, Chaitanya Kumar
• [PATCH v2] drm/xe: fix devcoredump chunk alignmnent calculation   Matthew Brost
• [PATCH] drm/xe: Fix page fault queue calculation   Matthew Brost
• [PATCH 1/1] drm/xe: Use copy_from_user() instead of __copy_from_user()   Matthew Brost
• [PATCH] drm/xe: Add ASID to range invalidation feature flag   Matthew Brost
• [PATCH] drm/xe: Add WA BB to capture active context utilization   Matthew Brost
• [PATCH] drm/xe: Call svm worker only when svm is enabled   Matthew Brost
• [PATCH 1/4] drm/xe: Simplify migration kunit tests   Matthew Brost
• [PATCH 2/4] drm/xe: Silence migrate debug message.   Matthew Brost
• [PATCH 3/4] drm/xe: Fix small leak in migration error path.   Matthew Brost
• [PATCH v2] drm/xe: Add config control for svm flush work   Matthew Brost
• [PATCH] drm/ttm: Fix ttm_backup kerneldoc   Matthew Brost
• [PATCH v6 02/20] drm/xe: Strict migration policy for atomic SVM faults   Matthew Brost
• [PATCH v3 3/4] drm/xe: Check 64-bit CTX timestamp for TDR when available   Matthew Brost
• [PATCH v3 4/4] drm/xe: Add WA BB to capture active context utilization   Matthew Brost
• [PATCH 1/8] drm/sched: Allow drivers to skip the reset and keep on running   Matthew Brost
• [PATCH 7/8] drm/xe: Use DRM_GPU_SCHED_STAT_RUNNING to skip the reset   Matthew Brost
• [PATCH 1/8] drm/sched: Allow drivers to skip the reset and keep on running   Matthew Brost
• [PATCH v6 02/20] drm/xe: Strict migration policy for atomic SVM faults   Matthew Brost
• [PATCH v6 0/5] Enable SVM atomics in Xe / GPU SVM   Matthew Brost
• [PATCH v6 1/5] drm/gpusvm: Introduce devmem_only flag for allocation   Matthew Brost
• [PATCH v6 2/5] drm/xe: Strict migration policy for atomic SVM faults   Matthew Brost
• [PATCH v6 3/5] drm/gpusvm: Add timeslicing support to GPU SVM   Matthew Brost
• [PATCH v6 4/5] drm/xe: Timeslice GPU on atomic SVM fault   Matthew Brost
• [PATCH v6 5/5] drm/xe: Add atomic_svm_timeslice_ms debugfs entry   Matthew Brost
• [PATCH v6 2/5] drm/xe: Strict migration policy for atomic SVM faults   Matthew Brost
• [PATCH v2] drm/xe: Add config control for svm flush work   Brost, Matthew
• [PATCH v4 0/9] Add support for Mesa GPU hang replay tool   Matthew Brost
• [PATCH v4 1/9] drm/xe: Add properties line to VM snapshot capture   Matthew Brost
• [PATCH v4 2/9] drm/xe: Add "null_sparse" type to VM snap properties   Matthew Brost
• [PATCH v4 3/9] drm/xe: Add mem_region to properties line in VM snapshot capture   Matthew Brost
• [PATCH v4 4/9] drm/xe: Add pat_index to properties line in VM snapshot capture   Matthew Brost
• [PATCH v4 5/9] drm/xe: Add cpu_caching to properties line in VM snapshot capture   Matthew Brost
• [PATCH v4 6/9] drm/xe: Add VM.uapi_flags to VM snapshot capture   Matthew Brost
• [PATCH v4 7/9] drm/xe/uapi: Add DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE   Matthew Brost
• [PATCH v4 8/9] drm/xe: Add replay_offset and replay_length lines to LRC HWCTX snapshot   Matthew Brost
• [PATCH v4 9/9] drm/xe: Implement DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE   Matthew Brost
• [PATCH v4 3/4] drm/xe: Check 64-bit CTX timestamp for TDR when available   Matthew Brost
• [PATCH v4 3/4] drm/xe: Check 64-bit CTX timestamp for TDR when available   Matthew Brost
• [PATCH v4 2/9] drm/xe: Add "null_sparse" type to VM snap properties   Matthew Brost
• [PATCH 4/4] drm/xe: Add migrate performance kunit test   Matthew Brost
• [PATCH v6 2/5] drm/xe: Strict migration policy for atomic SVM faults   Matthew Brost
• [PATCH] drm/xe: Do not print engine reset message on a killed queue   Matthew Brost
• [PATCH] drm/xe: Do not print engine reset message on a killed queue   Matthew Brost
• [PATCH] drm/xe: Do not print engine reset message on a killed queue   Matthew Brost
• [RFC v2 01/13] drm/i915: Use provided dma_fence_is_chain   Matthew Brost
• [PATCH 0/8] drm/sched: Allow drivers to skip the reset with DRM_GPU_SCHED_STAT_RUNNING   Maíra Canal
• [PATCH 1/8] drm/sched: Allow drivers to skip the reset and keep on running   Maíra Canal
• [PATCH 2/8] drm/sched: Always free the job after the timeout   Maíra Canal
• [PATCH 3/8] drm/sched: Reduce scheduler's timeout for timeout tests   Maíra Canal
• [PATCH 4/8] drm/sched: Add new test for DRM_GPU_SCHED_STAT_RUNNING   Maíra Canal
• [PATCH 5/8] drm/v3d: Use DRM_GPU_SCHED_STAT_RUNNING to skip the reset   Maíra Canal
• [PATCH 6/8] drm/etnaviv: Use DRM_GPU_SCHED_STAT_RUNNING to skip the reset   Maíra Canal
• [PATCH 7/8] drm/xe: Use DRM_GPU_SCHED_STAT_RUNNING to skip the reset   Maíra Canal
• [PATCH 8/8] drm/panfrost: Use DRM_GPU_SCHED_STAT_RUNNING to skip the reset   Maíra Canal
• [PATCH 2/8] drm/sched: Always free the job after the timeout   Maíra Canal
• [PATCH 3/8] drm/sched: Reduce scheduler's timeout for timeout tests   Maíra Canal
• [PATCH 2/8] drm/sched: Always free the job after the timeout   Maíra Canal
• [PATCH 1/8] drm/sched: Allow drivers to skip the reset and keep on running   Maíra Canal
• [PATCH] drm/xe: Add ASID to range invalidation feature flag   Cavitt, Jonathan
• [PATCH] drm/xe: Fix page fault queue calculation   Cavitt, Jonathan
• [PATCH v23 2/5] drm/xe/xe_gt_pagefault: Move pagefault struct to header   Cavitt, Jonathan
• [PATCH v24 0/5] drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Jonathan Cavitt
• [PATCH v24 1/5] drm/xe/xe_gt_pagefault: Disallow writes to read-only VMAs   Jonathan Cavitt
• [PATCH v24 2/5] drm/xe/xe_gt_pagefault: Move pagefault struct to header   Jonathan Cavitt
• [PATCH v24 3/5] drm/xe/uapi: Define drm_xe_vm_get_property   Jonathan Cavitt
• [PATCH v24 4/5] drm/xe/xe_vm: Add per VM fault info   Jonathan Cavitt
• [PATCH v24 5/5] drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Jonathan Cavitt
• [PATCH v24 0/5] drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Jonathan Cavitt
• [PATCH v24 1/5] drm/xe/xe_gt_pagefault: Disallow writes to read-only VMAs   Jonathan Cavitt
• [PATCH v24 2/5] drm/xe/xe_gt_pagefault: Move pagefault struct to header   Jonathan Cavitt
• [PATCH v24 3/5] drm/xe/uapi: Define drm_xe_vm_get_property   Jonathan Cavitt
• [PATCH v24 4/5] drm/xe/xe_vm: Add per VM fault info   Jonathan Cavitt
• [PATCH v24 5/5] drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Jonathan Cavitt
• [PATCH v24 0/5] drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Cavitt, Jonathan
• [PATCH v23 2/5] drm/xe/xe_gt_pagefault: Move pagefault struct to header   Cavitt, Jonathan
• [PATCH v25 0/5] drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Jonathan Cavitt
• [PATCH v25 1/5] drm/xe/xe_gt_pagefault: Disallow writes to read-only VMAs   Jonathan Cavitt
• [PATCH v25 2/5] drm/xe/xe_gt_pagefault: Move pagefault struct to header   Jonathan Cavitt
• [PATCH v25 3/5] drm/xe/uapi: Define drm_xe_vm_get_property   Jonathan Cavitt
• [PATCH v25 4/5] drm/xe/xe_vm: Add per VM fault info   Jonathan Cavitt
• [PATCH v25 5/5] drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Jonathan Cavitt
• [PATCH v24 3/5] drm/xe/uapi: Define drm_xe_vm_get_property   Cavitt, Jonathan
• [PATCH v4 1/9] drm/xe: Add properties line to VM snapshot capture   Cavitt, Jonathan
• [PATCH v4 2/9] drm/xe: Add "null_sparse" type to VM snap properties   Cavitt, Jonathan
• [PATCH v4 3/9] drm/xe: Add mem_region to properties line in VM snapshot capture   Cavitt, Jonathan
• [PATCH v4 4/9] drm/xe: Add pat_index to properties line in VM snapshot capture   Cavitt, Jonathan
• [PATCH v4 5/9] drm/xe: Add cpu_caching to properties line in VM snapshot capture   Cavitt, Jonathan
• [PATCH v4 6/9] drm/xe: Add VM.uapi_flags to VM snapshot capture   Cavitt, Jonathan
• [PATCH v4 7/9] drm/xe/uapi: Add DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE   Cavitt, Jonathan
• [PATCH v4 8/9] drm/xe: Add replay_offset and replay_length lines to LRC HWCTX snapshot   Cavitt, Jonathan
• [PATCH v4 9/9] drm/xe: Implement DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE   Cavitt, Jonathan
• [PATCH] drm/xe: Do not print engine reset message on a killed queue   Cavitt, Jonathan
• [PATCH] drm/xe: Do not print engine reset message on a killed queue   Cavitt, Jonathan
• [PATCH 1/1] drm/xe: Use copy_from_user() instead of __copy_from_user()   Harish Chegondi
• [PATCH v2 01/12] drm/i915/dp_mst: Use the correct connector while computing the link BPP limit on MST   Luca Coelho
• [PATCH v2 02/12] drm/i915/dp_mst: Simplify handling the single-bpp case during state computation   Luca Coelho
• [PATCH v2 03/12] drm/i915/dp_mst: Validate compressed bpp vs. platform restrictions   Luca Coelho
• [PATCH v2 04/12] drm/i915/dp_mst: Update the total link slot count early   Luca Coelho
• [PATCH v2 06/12] drm/i915/dp_mst: Simplify computing the min/max compressed bpp limits   Luca Coelho
• [PATCH v2 07/12] drm/i915/dp: Limit max link bpp properly to a fractional value on SST   Luca Coelho
• [PATCH v2 02/12] drm/i915/dp_mst: Simplify handling the single-bpp case during state computation   Imre Deak
• [PATCH v2 09/12] drm/i915/display: Factor out intel_display_{min, max}_pipe_bpp()   Imre Deak
• [PATCH v2 09/12] drm/i915/display: Factor out intel_display_{min, max}_pipe_bpp()   Imre Deak
• [PATCH v2 11/12] drm/i915: Add support for forcing the link bpp on a connector   Imre Deak
• [PATCH] drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation   Imre Deak
• [PATCH v3 00/12] drm/i915/dp_mst: Add support for fractional link bpps   Imre Deak
• [PATCH v3 01/12] drm/i915/dp_mst: Use the correct connector while computing the link BPP limit on MST   Imre Deak
• [PATCH v3 02/12] drm/i915/dp_mst: Simplify handling the single-bpp case during state computation   Imre Deak
• [PATCH v3 03/12] drm/i915/dp_mst: Validate compressed bpp vs. platform restrictions   Imre Deak
• [PATCH v3 04/12] drm/i915/dp_mst: Update the total link slot count early   Imre Deak
• [PATCH v3 05/12] drm/i915/dp_mst: Check BW limit on the local MST link early   Imre Deak
• [PATCH v3 06/12] drm/i915/dp_mst: Simplify computing the min/max compressed bpp limits   Imre Deak
• [PATCH v3 07/12] drm/i915/dp: Limit max link bpp properly to a fractional value on SST   Imre Deak
• [PATCH v3 08/12] drm/i915/dp_mst: Add support for fractional compressed link bpps on MST   Imre Deak
• [PATCH v3 09/12] drm/i915/display: Factor out intel_display_{min, max}_pipe_bpp()   Imre Deak
• [PATCH v3 10/12] drm/i915/dp: Export intel_dp_dsc_min_src_compressed_bpp()   Imre Deak
• [PATCH v3 11/12] drm/i915: Add support for forcing the link bpp on a connector   Imre Deak
• [PATCH v3 12/12] drm/i915/dp_mst: Enable fractional link bpps on MST if the bpp is forced   Imre Deak
• [PATCH 1/1] drm/xe: Use copy_from_user() instead of __copy_from_user()   Dixit, Ashutosh
• [PATCH] drm/xe: Fix the gem shrinker name   Francois Dugast
• [PATCH v6 19/20] drm/xe/svm: Implement prefetch support for SVM ranges   Ghimiray, Himal Prasad
• [PATCH v6 19/20] drm/xe/svm: Implement prefetch support for SVM ranges   Ghimiray, Himal Prasad
• [PATCH] drm/xe: Release force wake first then runtime power   Ghimiray, Himal Prasad
• [PATCH v4 00/17] Enable/Disable DC balance along with VRR DSB   Mitul Golani
• [PATCH v4 01/17] drm/i915/vrr: Fix the adjustment for the fixed rr vtotal for Display < 13   Mitul Golani
• [PATCH v4 02/17] drm/i915/vrr: Refactor vmin/vmax stuff   Mitul Golani
• [PATCH v4 03/17] drm/i915/display: Add source param for dc balance   Mitul Golani
• [PATCH v4 04/17] drm/i915/display: Add pipe dmc registers and bits for DC Balance   Mitul Golani
• [PATCH v4 05/17] drm/i915/display: Add VRR DC balance registers   Mitul Golani
• [PATCH v4 06/17] drm/i915/vrr: Add functions to read out vmin/vmax stuff   Mitul Golani
• [PATCH v4 07/17] drm/i915/vrr: Add DC Balance params to crtc_state   Mitul Golani
• [PATCH v4 08/17] drm/i915/vrr: Add state dump for DC Balance params   Mitul Golani
• [PATCH v4 09/17] drm/i915/vrr: Add compute config for DC Balance params   Mitul Golani
• [PATCH v4 10/17] drm/i915/vrr: Write DC balance params to hw registers   Mitul Golani
• [PATCH v4 11/17] drm/i915: Extract vrr_vblank_start()   Mitul Golani
• [PATCH v4 12/17] drm/i915/vrr: Implement vblank evasion with DC balancing   Mitul Golani
• [PATCH v4 13/17] drm/i915/dsb: Add pipedmc dc balance enable/disable   Mitul Golani
• [PATCH v4 14/17] drm/i915/vrr: Restructure VRR enablement bit   Mitul Golani
• [PATCH v4 15/17] drm/i915/vrr: Pause DC Balancing for DSB commits   Mitul Golani
• [PATCH v4 16/17] drm/i915/vrr: Add function to check if DC Balance Possible   Mitul Golani
• [PATCH v4 17/17] drm/i915/vrr: Enable DC Balance bit   Mitul Golani
• [PATCH] drm/xe/ptl: Disable null query for anyhit shader   Nitin Gote
• [PATCH] drm/xe/ptl: Disable null query for anyhit shader   Gote, Nitin R
• [RFC 9/9] {fwctl,drm}/xe/pcode: Introduce xe_pcode_fwctl   Jason Gunthorpe
• [RFC 9/9] {fwctl,drm}/xe/pcode: Introduce xe_pcode_fwctl   Jason Gunthorpe
• [PATCH v2] drm/xe: Add helper function to inject fault into ct_dead_capture()   John Harrison
• [PATCH v2] drm/xe: Add helper function to inject fault into ct_dead_capture()   John Harrison
• [PATCH] drm/xe: Do not print engine reset message on a killed queue   John Harrison
• [PATCH v3] drm/xe: Add helper function to inject fault into ct_dead_capture()   John Harrison
• [PATCH] drm/xe: Do not print engine reset message on a killed queue   John Harrison
• [PULL] drm-xe-next   Thomas Hellstrom
• [PATCH] drm/ttm: Remove the struct ttm_backup abstraction   Thomas Hellström
• [PATCH] drm/ttm: Fix ttm_backup kerneldoc   Thomas Hellström
• [PATCH v6 19/20] drm/xe/svm: Implement prefetch support for SVM ranges   Thomas Hellström
• [PATCH v2 17/32] drm/xe/uapi: Add madvise interface   Thomas Hellström
• [PATCH v6 19/20] drm/xe/svm: Implement prefetch support for SVM ranges   Thomas Hellström
• ✗ Xe.CI.Full: failure for drm/ttm: Remove the struct ttm_backup abstraction   Thomas Hellström
• [PATCH v6 02/20] drm/xe: Strict migration policy for atomic SVM faults   Thomas Hellström
• [PATCH v6 02/20] drm/xe: Strict migration policy for atomic SVM faults   Thomas Hellström
• [PATCH v6 19/20] drm/xe/svm: Implement prefetch support for SVM ranges   Thomas Hellström
• [PATCH v6 2/5] drm/xe: Strict migration policy for atomic SVM faults   Thomas Hellström
• [PATCH] drm/xe: Fix the gem shrinker name   Thomas Hellström
• [PATCH] drm/xe: Make the gem shrinker drm managed   Thomas Hellström
• [PATCH v6 2/5] drm/xe: Strict migration policy for atomic SVM faults   Thomas Hellström
• [PATCH] drm/xe: Make the gem shrinker drm managed   Thomas Hellström
• [PATCH] drm/xe: Fix page fault queue calculation   Dafna Hirschfeld
• [PATCH 01/11] drm/dp: Add Panel Replay capability bits from DP2.1 specification   Hogander, Jouni
• [PATCH v3 1/2] drm/i915/alpm: Make intel_alpm_enable_sink available for PSR   Hogander, Jouni
• [PATCH 00/11] Panel Replay + Adaptive sync   Jouni Högander
• [PATCH 01/11] drm/dp: Add Panel Replay capability bits from DP2.1 specification   Jouni Högander
• [PATCH 02/11] drm/i915/psr: Read both Panel Replay capability registers from DPCD   Jouni Högander
• [PATCH 03/11] drm/i915/alpm: Add PR_ALPM_CTL register definitions   Jouni Högander
• [PATCH 04/11] drm/i915/alpm: Write PR_ALPM_CTL register   Jouni Högander
• [PATCH 05/11] drm/i915/psr: Add interface to check if AUXLess ALPM is needed by PSR   Jouni Högander
• [PATCH 06/11] drm/i915/alpm: Add new interface to check if AUXLess ALPM is used   Jouni Högander
• [PATCH 07/11] drm/i915/alpm: Move port alpm configuration   Jouni Högander
• [PATCH 08/11] drm/i915/display: Add PHY_CMN1_CONTROL register definitions   Jouni Högander
• [PATCH 09/11] drm/i915/display: Add function to configure LFPS sending   Jouni Högander
• [PATCH 10/11] drm/i915/psr: Fix using wrong mask in REG_FIELD_PREP   Jouni Högander
• [PATCH 11/11] drm/i915/psr: Do not disable Panel Replay in case VRR is enabled   Jouni Högander
• [PATCH 0/4] ALPM rework and fixes   Jouni Högander
• [PATCH 1/4] drm/i915/alpm: Clear ALPM registers when disabling ALPM   Jouni Högander
• [PATCH 2/4] drm/i915/alpm: Move disabling sink ALPM to intel_alpm.c   Jouni Högander
• [PATCH 3/4] drm/i915/alpm: Disable ALPM rework   Jouni Högander
• [PATCH 4/4] drm/i915/alpm: Stop writing ALPM registers when PSR is enabled   Jouni Högander
• [PATCH v2 0/3] ALPM rework and fixes   Jouni Högander
• [PATCH v2 1/3] drm/i915/alpm: Move disabling sink ALPM to intel_alpm.c   Jouni Högander
• [PATCH v2 2/3] drm/i915/alpm: Disable ALPM rework   Jouni Högander
• [PATCH v2 3/3] drm/i915/alpm: Stop writing ALPM registers when PSR is enabled   Jouni Högander
• [PATCH v3 0/2] ALPM rework and fixes   Jouni Högander
• [PATCH v3 1/2] drm/i915/alpm: Make intel_alpm_enable_sink available for PSR   Jouni Högander
• [PATCH v3 2/2] drm/i915/alpm: Stop writing ALPM registers when PSR is enabled   Jouni Högander
• [PATCH v3 0/4] Track FAST_REQ H2Gs to report where errors came from   John.C.Harrison at Intel.com
• [PATCH v3 1/4] drm/xe/guc: Remove double blank line   John.C.Harrison at Intel.com
• [PATCH v3 2/4] drm/xe/guc: Add missing H2G error code definitions   John.C.Harrison at Intel.com
• [PATCH v3 3/4] drm/xe/guc: Rename CONFIG_XE_LARGE_GUC_BUFFER   John.C.Harrison at Intel.com
• [PATCH v3 4/4] drm/xe/guc: Track FAST_REQ H2Gs to report where errors came from   John.C.Harrison at Intel.com
• [PATCH v4 0/3] BMG PCIe Gen5 downgrade attributes and usage   Raag Jadav
• Rare divide error during display resume   Raag Jadav
• [PATCH v4 0/3] BMG PCIe Gen5 downgrade attributes and usage   Raag Jadav
• [PATCH v6 0/3] BMG PCIe link downgrade attributes and usage   Raag Jadav
• [PATCH v6 1/3] drm/xe/pm: s/xe_device_sysfs_init/xe_pm_sysfs_init   Raag Jadav
• [PATCH v6 2/3] drm/xe: Expose PCIe link downgrade attributes   Raag Jadav
• [PATCH v6 3/3] drm/xe/doc: Wire up PCIe Gen5 limitations   Raag Jadav
• [PATCH v6 1/3] drm/xe/pm: s/xe_device_sysfs_init/xe_pm_sysfs_init   Raag Jadav
• [PATCH v1] drm/xe: Introduce xe_pm_sysfs.c   Raag Jadav
• [PATCH v7 0/3] BMG PCIe link downgrade attributes and usage   Raag Jadav
• [PATCH v7 1/3] drm/xe: Move xe_device_sysfs_init() to xe_device_probe()   Raag Jadav
• [PATCH v7 2/3] drm/xe: Expose PCIe link downgrade attributes   Raag Jadav
• [PATCH v7 3/3] drm/xe/doc: Wire up PCIe Gen5 limitations   Raag Jadav
• [PATCH v1 2/3] PM: sleep: Introduce pm_suspend_in_progress()   Raag Jadav
• [PATCH v2] drm/xe/vsec: Allow for kernel context access   Johnstone, Nicholas
• [PATCH v2] drm/xe: Add helper function to inject fault into ct_dead_capture()   K V P, Satyanarayana
• [PATCH] drm/i915/psr: Do not read PSR2_SU_STATUS on AlderLake and onwards   Kahola, Mika
• [PATCH 02/10] drm/i915/hdcp: deduplicate and refactor HDCP GSC ops initialization   Kandpal, Suraj
• [PATCH 03/10] drm/i915/hdcp: split HDCP GSC message alloc/save responsibilities   Kandpal, Suraj
• [PATCH 04/10] drm/i915/hdcp: rename struct intel_hdcp_gsc_message to intel_hdcp_gsc_context   Kandpal, Suraj
• [PATCH 05/10] drm/i915/hdcp: rename HDCP GSC context alloc/free functions   Kandpal, Suraj
• [PATCH 06/10] drm/i915/hdcp: pass the context to the HDCP GSC message interface   Kandpal, Suraj
• [PATCH 09/10] drm/i915/hdcp: pass struct drm_device to driver specific HDCP GSC code   Kandpal, Suraj
• [PATCH 10/10] drm/i915/hdcp: drop unnecessary include from intel_hdcp_gsc.h   Kandpal, Suraj
• [PATCH 09/10] drm/i915/hdcp: pass struct drm_device to driver specific HDCP GSC code   Kandpal, Suraj
• [PATCH] drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed   Kandpal, Suraj
• [PATCH v3 1/2] drm/i915/alpm: Make intel_alpm_enable_sink available for PSR   Kandpal, Suraj
• [PATCH 00/18] DPLL framework redesign   Suraj Kandpal
• [PATCH 01/18] drm/i915/dpll: Rename intel_dpll   Suraj Kandpal
• [PATCH 02/18] drm/i915/dpll: Rename intel_dpll_funcs   Suraj Kandpal
• [PATCH 03/18] drm/i915/dpll: Rename intel_shared_dpll_state   Suraj Kandpal
• [PATCH 04/18] drm/i915/dpll: Rename macro for_each_shared_dpll   Suraj Kandpal
• [PATCH 05/18] drm/i915/dpll: Rename intel_shared_dpll_funcs   Suraj Kandpal
• [PATCH 06/18] drm/i915/dpll: Rename intel_shared_dpll   Suraj Kandpal
• [PATCH 07/18] drm/i915/dpll: Move away from using shared dpll   Suraj Kandpal
• [PATCH 08/18] drm/i915/dpll: Rename crtc_get_shared_dpll   Suraj Kandpal
• [PATCH 09/18] drm/i915/dpll: Change argument for enable hook in intel_dpll_funcs   Suraj Kandpal
• [PATCH 10/18] drm/i915/drm: Rename disable hook in intel_dpll_global_func   Suraj Kandpal
• [PATCH 11/18] drm/i915/dpll: Introduce new hook in intel_dpll_funcs   Suraj Kandpal
• [PATCH 12/18] drm/i915/dpll: Add intel_encoder argument to get_hw_state hook   Suraj Kandpal
• [PATCH 13/18] drm/i915/dpll: Change arguments for get_freq hook   Suraj Kandpal
• [PATCH 14/18] drm/i915/dpll: Rename intel_[enable/disable]_dpll   Suraj Kandpal
• [PATCH 15/18] drm/i915/dpll: Rename intel_unreference_dpll__crtc   Suraj Kandpal
• [PATCH 16/18] drm/i915/dpll: Rename intel_<release/reserve>_dpll   Suraj Kandpal
• [PATCH 17/18] drm/i915/dpll: Rename intel_compute_dpll   Suraj Kandpal
• [PATCH 18/18] drm/i915/dpll: Rename intel_update_active_dpll   Suraj Kandpal
• [PATCH 00/13] Modify drm helpers to use luminance   Suraj Kandpal
• [PATCH 01/13] drm/dp: Introduce new member in drm_backlight_info   Suraj Kandpal
• [PATCH 02/13] drm/dp: Add argument in drm_edp_backlight_init   Suraj Kandpal
• [PATCH 03/13] drm/dp: Add argument for luminance range info in drm_edp_backlight_init   Suraj Kandpal
• [PATCH 04/13] drm/dp: Move from u16 to u32 for max in drm_edp_backlight_info   Suraj Kandpal
• [PATCH 05/13] drm/dp: Change current_level argument type to u32   Suraj Kandpal
• [PATCH 06/13] drm/dp: Modify drm_edp_probe_state   Suraj Kandpal
• [PATCH 07/13] drm/dp: Change argument type for drm_edp_backlight_set_level   Suraj Kandpal
• [PATCH 08/13] drm/dp: Modify drm_edp_backlight_set_level   Suraj Kandpal
• [PATCH 09/13] drm/dp: Change argument type of drm_edp_backlight_enable   Suraj Kandpal
• [PATCH 10/13] drm/dp: Enable backlight control using luminance   Suraj Kandpal
• [PATCH 11/13] drm/i915/backlight: Use drm helper to initialize edp backlight   Suraj Kandpal
• [PATCH 12/13] drm/i915/backlight: Use drm helper to set edp backlight   Suraj Kandpal
• [PATCH 13/13] drm/i915/backlight: Use drm_edp_backlight_enable   Suraj Kandpal
• [PATCH RESEND v13 0/5] Expose modifiers/formats supported by async flips   Kandpal, Suraj
• [PATCH 6.14 106/183] drm/xe/guc: Fix capture of steering registers   Greg Kroah-Hartman
• [PATCH] drm/ttm: Remove the struct ttm_backup abstraction   Christian König
• [PULL] drm-intel-gt-next   Joonas Lahtinen
• [PATCH 0/4] drm/xe: Update migration tests.   Maarten Lankhorst
• [PATCH 1/4] drm/xe: Simplify migration kunit tests   Maarten Lankhorst
• [PATCH 2/4] drm/xe: Silence migrate debug message.   Maarten Lankhorst
• [PATCH 3/4] drm/xe: Fix small leak in migration error path.   Maarten Lankhorst
• [PATCH 4/4] drm/xe: Add migrate performance kunit test   Maarten Lankhorst
• [CI 00/10] Preparations to make struct xe_ggtt private.   Maarten Lankhorst
• [CI 01/10] drm/xe: Use xe_ggtt_map_bo_unlocked for resume   Maarten Lankhorst
• [CI 02/10] drm/xe: Add xe_ggtt_might_lock   Maarten Lankhorst
• [CI 03/10] drm/xe: Add xe_ggtt_alloc   Maarten Lankhorst
• [CI 04/10] drm/xe/display: Remove dereferences of ggtt for tile id   Maarten Lankhorst
• [CI 05/10] drm/xe/ggtt: Seperate flags and address in PTE encoding   Maarten Lankhorst
• [CI 06/10] drm/xe/display: Dont poke into GGTT internals to fill a DPT   Maarten Lankhorst
• [CI 07/10] drm/xe/display: Convert GGTT mapping to use pte_encode_flags   Maarten Lankhorst
• [CI 08/10] drm/xe: Remove pte_encode_bo callback   Maarten Lankhorst
• [CI 09/10] drm/xe: Implement a helper for reading out a GGTT PTE at a specified offset   Maarten Lankhorst
• [CI 10/10] drm/xe: Do not rely on GGTT internals in xe_guc_buf kunit tests   Maarten Lankhorst
• [PATCH 00/10] drm/xe/ggtt: Stop relying on GGTT internals.   Maarten Lankhorst
• [PATCH 01/10] drm/xe: Use xe_ggtt_map_bo_unlocked for resume   Maarten Lankhorst
• [PATCH 02/10] drm/xe: Add xe_ggtt_might_lock   Maarten Lankhorst
• [PATCH 03/10] drm/xe: Add xe_ggtt_alloc   Maarten Lankhorst
• [PATCH 04/10] drm/xe/display: Remove dereferences of ggtt for tile id   Maarten Lankhorst
• [PATCH 05/10] drm/xe/ggtt: Seperate flags and address in PTE encoding   Maarten Lankhorst
• [PATCH 06/10] drm/xe/display: Dont poke into GGTT internals to fill a DPT   Maarten Lankhorst
• [PATCH 07/10] drm/xe/display: Convert GGTT mapping to use pte_encode_flags   Maarten Lankhorst
• [PATCH 08/10] drm/xe: Remove pte_encode_bo callback   Maarten Lankhorst
• [PATCH 09/10] drm/xe: Implement a helper for reading out a GGTT PTE at a specified offset   Maarten Lankhorst
• [PATCH 10/10] drm/xe: Do not rely on GGTT internals in xe_guc_buf kunit tests   Maarten Lankhorst
• [PULL] drm-misc-next   Maarten Lankhorst
• [PATCH RESEND v13 0/5] Expose modifiers/formats supported by async flips   Maarten Lankhorst
• [PATCH AUTOSEL 6.14 231/642] drm/xe: Nuke VM's mapping upon close   Sasha Levin
• [PATCH AUTOSEL 6.14 232/642] drm/xe: Retry BO allocation   Sasha Levin
• [PATCH AUTOSEL 6.14 245/642] drm/xe: Disambiguate GMDID-based IP names   Sasha Levin
• [PATCH AUTOSEL 6.14 297/642] drm/xe/vf: Retry sending MMIO request to GUC on timeout error   Sasha Levin
• [PATCH AUTOSEL 6.14 298/642] drm/xe/pf: Create a link between PF and VF devices   Sasha Levin
• [PATCH AUTOSEL 6.14 305/642] drm/xe: xe_gen_wa_oob: replace program_invocation_short_name   Sasha Levin
• [PATCH AUTOSEL 6.14 353/642] drm/xe/oa: Ensure that polled read returns latest data   Sasha Levin
• [PATCH AUTOSEL 6.14 381/642] drm/xe/client: Skip show_run_ticks if unable to read timestamp   Sasha Levin
• [PATCH AUTOSEL 6.14 421/642] drm/xe/pf: Release all VFs configs on device removal   Sasha Levin
• [PATCH AUTOSEL 6.14 436/642] drm/xe: Stop ignoring errors from xe_ttm_stolen_mgr_init()   Sasha Levin
• [PATCH AUTOSEL 6.14 437/642] drm/xe: Fix xe_tile_init_noalloc() error propagation   Sasha Levin
• [PATCH AUTOSEL 6.14 441/642] drm/xe/debugfs: fixed the return value of wedged_mode_set   Sasha Levin
• [PATCH AUTOSEL 6.14 442/642] drm/xe/debugfs: Add missing xe_pm_runtime_put in wedge_mode_set   Sasha Levin
• [PATCH AUTOSEL 6.14 449/642] drm/xe/display: Remove hpd cancel work sync from runtime pm path   Sasha Levin
• [PATCH AUTOSEL 6.14 538/642] drm/xe: Fix PVC RPe and RPa information   Sasha Levin
• [PATCH AUTOSEL 6.14 562/642] drm/xe/relay: Don't use GFP_KERNEL for new transactions   Sasha Levin
• [PATCH AUTOSEL 6.14 594/642] drm/xe/pf: Reset GuC VF config when unprovisioning critical resource   Sasha Levin
• [PATCH AUTOSEL 6.14 597/642] drm/xe/pf: Move VFs reprovisioning to worker   Sasha Levin
• [PATCH AUTOSEL 6.14 606/642] drm/xe: Move suballocator init to after display init   Sasha Levin
• [PATCH AUTOSEL 6.14 607/642] drm/xe: Do not attempt to bootstrap VF in execlists mode   Sasha Levin
• [PATCH AUTOSEL 6.14 610/642] drm/xe/sa: Always call drm_suballoc_manager_fini()   Sasha Levin
• [PATCH AUTOSEL 6.14 611/642] drm/xe/vf: Perform early GT MMIO initialization to read GMDID   Sasha Levin
• [PATCH AUTOSEL 6.14 612/642] drm/xe: Always setup GT MMIO adjustment data   Sasha Levin
• [PATCH AUTOSEL 6.14 613/642] drm/xe/guc: Drop error messages about missing GuC logs   Sasha Levin
• [PATCH AUTOSEL 6.14 614/642] drm/xe: Reject BO eviction if BO is bound to current VM   Sasha Levin
• [PATCH AUTOSEL 6.14 617/642] drm/xe: Add locks in gtidle code   Sasha Levin
• [PATCH AUTOSEL 6.12 183/486] drm/xe: Nuke VM's mapping upon close   Sasha Levin
• [PATCH AUTOSEL 6.12 184/486] drm/xe: Retry BO allocation   Sasha Levin
• [PATCH AUTOSEL 6.12 236/486] drm/xe/vf: Retry sending MMIO request to GUC on timeout error   Sasha Levin
• [PATCH AUTOSEL 6.12 237/486] drm/xe/pf: Create a link between PF and VF devices   Sasha Levin
• [PATCH AUTOSEL 6.12 242/486] drm/xe: xe_gen_wa_oob: replace program_invocation_short_name   Sasha Levin
• [PATCH AUTOSEL 6.12 275/486] drm/xe/oa: Ensure that polled read returns latest data   Sasha Levin
• [PATCH AUTOSEL 6.12 343/486] drm/xe: Stop ignoring errors from xe_ttm_stolen_mgr_init()   Sasha Levin
• [PATCH AUTOSEL 6.12 344/486] drm/xe: Fix xe_tile_init_noalloc() error propagation   Sasha Levin
• [PATCH AUTOSEL 6.12 347/486] drm/xe/debugfs: fixed the return value of wedged_mode_set   Sasha Levin
• [PATCH AUTOSEL 6.12 348/486] drm/xe/debugfs: Add missing xe_pm_runtime_put in wedge_mode_set   Sasha Levin
• [PATCH AUTOSEL 6.12 439/486] drm/xe/relay: Don't use GFP_KERNEL for new transactions   Sasha Levin
• [PATCH AUTOSEL 6.12 469/486] drm/xe/pf: Reset GuC VF config when unprovisioning critical resource   Sasha Levin
• [PATCH AUTOSEL 6.12 477/486] drm/xe: Move suballocator init to after display init   Sasha Levin
• [PATCH AUTOSEL 6.12 478/486] drm/xe: Do not attempt to bootstrap VF in execlists mode   Sasha Levin
• [PATCH AUTOSEL 6.12 480/486] drm/xe/sa: Always call drm_suballoc_manager_fini()   Sasha Levin
• [PATCH AUTOSEL 6.12 481/486] drm/xe: Reject BO eviction if BO is bound to current VM   Sasha Levin
• [PATCH] drm/xe: Call svm worker only when svm is enabled   Shuicheng Lin
• [PATCH v2] drm/xe: Add config control for svm flush work   Shuicheng Lin
• [PATCH] drm/xe: Release force wake first then runtime power   Shuicheng Lin
• [PATCH v2] drm/xe: Add config control for svm flush work   Lin, Shuicheng
• [PATCH v12 3/4] drm/xe/guc: Introduce enum with offsets for context register H2Gs   Lis, Tomasz
• [PATCH v13 0/4] drm/xe/vf: Post-migration recovery of GGTT nodes and CTB   Tomasz Lis
• [PATCH v13 1/4] drm/xe/vf: Divide GGTT ballooning into allocation and insertion   Tomasz Lis
• [PATCH v13 2/4] drm/xe/vf: Shifting GGTT area post migration   Tomasz Lis
• [PATCH v13 3/4] drm/xe/guc: Introduce enum with offsets for context register H2Gs   Tomasz Lis
• [PATCH v13 4/4] drm/xe/vf: Fixup CTB send buffer messages after migration   Tomasz Lis
• [PATCH] drm/xe: Add WA BB to capture active context utilization   Lucas De Marchi
• [PULL] drm-xe-fixes   Lucas De Marchi
• [PATCH v4 0/3] BMG PCIe Gen5 downgrade attributes and usage   Lucas De Marchi
• [PATCH] drm/gpusvm: remove unused pages pointer   Lucas De Marchi
• [PATCH v6 1/3] drm/xe/pm: s/xe_device_sysfs_init/xe_pm_sysfs_init   Lucas De Marchi
• [PATCH v2] drm/xe/vsec: Allow for kernel context access   Lucas De Marchi
• [PATCH v4 1/4] drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value   Lucas De Marchi
• [PATCH v4 3/4] drm/xe: Check 64-bit CTX timestamp for TDR when available   Lucas De Marchi
• [PATCH v4 4/4] drm/xe: Add WA BB to capture active context utilization   Lucas De Marchi
• [PATCH v1] drm/xe/pm: Wait for lmem ready in resume   Lucas De Marchi
• [PATCH v2] drm/xe/vsec: Allow for kernel context access   Lucas De Marchi
• [PULL] drm-xe-fixes   Lucas De Marchi
• [PATCH v5 2/3] drm/xe: Save the gt pointer in lrc and drop the tile   Lucas De Marchi
• [PATCH v5 3/3] drm/xe: Add WA BB to capture active context utilization   Lucas De Marchi
• [PATCH RESEND v13 0/5] Expose modifiers/formats supported by async flips   Murthy, Arun R
• [PATCH v2] drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP   Ankit Nautiyal
• [PATCH] drm/i915/vrr: Set vrr.vmin to min Vtotal to re-enable LRR for PTL   Ankit Nautiyal
• [PATCH] drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP   Nautiyal, Ankit K
• [PATCH v2] drm/i915/display: Implement wa_14024400148   Nautiyal, Ankit K
• [PATCH v2 01/12] drm/i915/dp_mst: Use the correct connector while computing the link BPP limit on MST   Nautiyal, Ankit K
• [PATCH v2 02/12] drm/i915/dp_mst: Simplify handling the single-bpp case during state computation   Nautiyal, Ankit K
• [PATCH v2 03/12] drm/i915/dp_mst: Validate compressed bpp vs. platform restrictions   Nautiyal, Ankit K
• [PATCH v2 04/12] drm/i915/dp_mst: Update the total link slot count early   Nautiyal, Ankit K
• [PATCH v2 05/12] drm/i915/dp_mst: Check BW limit on the local MST link early   Nautiyal, Ankit K
• [PATCH v2 06/12] drm/i915/dp_mst: Simplify computing the min/max compressed bpp limits   Nautiyal, Ankit K
• [PATCH v2 02/12] drm/i915/dp_mst: Simplify handling the single-bpp case during state computation   Nautiyal, Ankit K
• [PATCH v2 07/12] drm/i915/dp: Limit max link bpp properly to a fractional value on SST   Nautiyal, Ankit K
• [PATCH v2 08/12] drm/i915/dp_mst: Add support for fractional compressed link bpps on MST   Nautiyal, Ankit K
• [PATCH v2 09/12] drm/i915/display: Factor out intel_display_{min, max}_pipe_bpp()   Nautiyal, Ankit K
• [PATCH v2 12/12] drm/i915/dp_mst: Enable fractional link bpps on MST if the bpp is forced   Nautiyal, Ankit K
• [PATCH v2 10/12] drm/i915/dp: Export intel_dp_dsc_min_src_compressed_bpp()   Nautiyal, Ankit K
• [PATCH v2 09/12] drm/i915/display: Factor out intel_display_{min, max}_pipe_bpp()   Nautiyal, Ankit K
• [PATCH v2 11/12] drm/i915: Add support for forcing the link bpp on a connector   Nautiyal, Ankit K
• [PATCH v4 04/17] drm/i915/display: Add pipe dmc registers and bits for DC Balance   Nautiyal, Ankit K
• [PATCH v4 05/17] drm/i915/display: Add VRR DC balance registers   Nautiyal, Ankit K
• [PATCH v4 07/17] drm/i915/vrr: Add DC Balance params to crtc_state   Nautiyal, Ankit K
• [PATCH v4 09/17] drm/i915/vrr: Add compute config for DC Balance params   Nautiyal, Ankit K
• [PATCH v4 16/17] drm/i915/vrr: Add function to check if DC Balance Possible   Nautiyal, Ankit K
• [PATCH v4 02/17] drm/i915/vrr: Refactor vmin/vmax stuff   Nautiyal, Ankit K
• [PATCH v2 11/12] drm/i915: Add support for forcing the link bpp on a connector   Nautiyal, Ankit K
• [PATCH v2 09/12] drm/i915/display: Factor out intel_display_{min, max}_pipe_bpp()   Nautiyal, Ankit K
• [Intel-wired-lan] [REGRESSION] v6.15-rc3: 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM transactions")   Tony Nguyen
• [PATCH v2 0/3] drm/i915/display: remove intel_de_*() compat wrappers   Jani Nikula
• [PATCH v2 1/3] drm/i915/dpt: convert intel_dpt_common.c to struct intel_display   Jani Nikula
• [PATCH v2 2/3] drm/i915/hdmi: convert rest of intel_hdmi.c to struct intel_display   Jani Nikula
• [PATCH v2 3/3] drm/i915/de: drop drm_i915_private compat wrappers from intel_de_*()   Jani Nikula
• [PATCH] drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP   Jani Nikula
• [PATCH 01/11] drm/dp: Add Panel Replay capability bits from DP2.1 specification   Jani Nikula
• [PATCH 09/10] drm/i915/hdcp: pass struct drm_device to driver specific HDCP GSC code   Jani Nikula
• [PATCH] drm/i915/backlight: drop dmesg suggestion to file bugs   Jani Nikula
• [PATCH 09/10] drm/i915/hdcp: pass struct drm_device to driver specific HDCP GSC code   Jani Nikula
• [REGRESSION] v6.15-rc3: 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM transactions")   Jani Nikula
• [PATCH 0/4] drm/i915/display: minor cleanups on drm_i915_private use   Jani Nikula
• [PATCH 1/4] drm/i915/dsi: remove dependency on i915_drv.h   Jani Nikula
• [PATCH 2/4] drm/i915/display: remove struct drm_i915_private forward declaration   Jani Nikula
• [PATCH 3/4] drm/i915/bios: fix a comment referencing struct drm_i915_private   Jani Nikula
• [PATCH 4/4] drm/i915/crtc: pass struct intel_display to DISPLAY_VER()   Jani Nikula
• [PATCH 0/8] drm/i915: irq_lock refactoring, move to display   Jani Nikula
• [PATCH 1/8] drm/i915/irq: move locking inside vlv_display_irq_reset()   Jani Nikula
• [PATCH 2/8] drm/i915/irq: move locking inside valleyview_{enable, disable}_display_irqs()   Jani Nikula
• [PATCH 3/8] drm/i915/irq: move locking inside vlv_display_irq_postinstall()   Jani Nikula
• [PATCH 4/8] drm/i915/irq: split out i915_display_irq_postinstall()   Jani Nikula
• [PATCH 5/8] drm/i915/irq: split out i965_display_irq_postinstall()   Jani Nikula
• [PATCH 6/8] drm/i915/irq: make i915_enable_asle_pipestat() static   Jani Nikula
• [PATCH 7/8] drm/i915/rps: refactor display rps support   Jani Nikula
• [PATCH 8/8] drm/i915/irq: move i915->irq_lock to display->irq.lock   Jani Nikula
• [PATCH 0/4] drm/i915/display: minor cleanups on drm_i915_private use   Jani Nikula
• [PATCH 8/8] drm/i915/irq: move i915->irq_lock to display->irq.lock   Jani Nikula
• [PATCH 0/4] drm/{i915, xe}: convert i915->display and xe->display into pointers   Jani Nikula
• [PATCH 1/4] drm/xe/rpm: use to_xe_device() instead of container_of   Jani Nikula
• [PATCH 2/4] drm/xe/display: do not reference xe->display inline   Jani Nikula
• [PATCH 3/4] drm/i915: do not reference i915->display inline   Jani Nikula
• [PATCH 4/4] drm/{i915, xe}: convert i915 and xe display members into pointers   Jani Nikula
• [PATCH v4 5/5] drm/xe/hwmon: Read energy status from PMT   Jani Nikula
• [PATCH 0/6] drm/i915/dram: dram_info refactoring   Jani Nikula
• [PATCH 1/6] drm/i915/bw: pass struct dram_info pointer around   Jani Nikula
• [PATCH 2/6] drm/i915/dram: add accessor for struct dram_info and use it   Jani Nikula
• [PATCH 3/6] drm/i915/wm: DG2 doesn't have dram info to look up wm_lv_0_adjust_needed   Jani Nikula
• [PATCH 4/6] drm/i915/dram: pass struct dram_info pointer around   Jani Nikula
• [PATCH 5/6] drm/i915/dram: add return value and handling to intel_dram_detect()   Jani Nikula
• [PATCH 6/6] drm/i915/dram: allocate struct dram_info dynamically   Jani Nikula
• [PATCH v2] drm/{i915, xe}: convert i915 and xe display members into pointers   Jani Nikula
• [PATCH] drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation   Jani Nikula
• [Intel-wired-lan] [REGRESSION] v6.15-rc3: 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM transactions")   Jani Nikula
• [PATCH v2 0/8] drm/i915: refactor VLV IOSF SB for display usage   Jani Nikula
• [PATCH v2 1/8] drm/i915: rename vlv_sideband*.[ch] to vlv_iosf_sb*.[ch]   Jani Nikula
• [PATCH v2 2/8] drm/i915: add generic read/write functions for VLV IOSF SB   Jani Nikula
• [PATCH v2 3/8] drm/i915: rewrite VLV IOSF SB unit specific read/write functions   Jani Nikula
• [PATCH v2 4/8] drm/i915: switch i915 core to generic VLV IOSF SB functions   Jani Nikula
• [PATCH v2 5/8] drm/i915: move VLV IOSF SB unit specific helpers under display   Jani Nikula
• [PATCH v2 6/8] drm/i915: convert VLV IOSF SB interface to struct drm_device   Jani Nikula
• [PATCH v2 7/8] drm/i915: rename VLV IOSF SB ports parameter to unit_mask   Jani Nikula
• [PATCH v2 8/8] drm/i915: ensure correct VLV IOSF SB units have been get/put   Jani Nikula
• [PATCH 4/6] drm/i915: switch i915 core to generic VLV IOSF SB functions   Jani Nikula
• [PATCH v8 6/9] drm/i915/lobf: Update lobf if any change in dependent parameters   Jani Nikula
• [PATCH] drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed   Jani Nikula
• [PULL] drm-intel-fixes   Jani Nikula
• [PATCH RESEND v13 0/5] Expose modifiers/formats supported by async flips   Jani Nikula
• [PATCH RESEND v13 0/5] Expose modifiers/formats supported by async flips   Jani Nikula
• [PATCH] drm/i915/display: Enforce pipeline flush with DSI HS transfer   Jani Nikula
• [PATCH 01/18] drm/i915/dpll: Rename intel_dpll   Jani Nikula
• [PATCH 02/18] drm/i915/dpll: Rename intel_dpll_funcs   Jani Nikula
• [PATCH 03/18] drm/i915/dpll: Rename intel_shared_dpll_state   Jani Nikula
• [PATCH 04/18] drm/i915/dpll: Rename macro for_each_shared_dpll   Jani Nikula
• [PATCH 05/18] drm/i915/dpll: Rename intel_shared_dpll_funcs   Jani Nikula
• [PATCH 06/18] drm/i915/dpll: Rename intel_shared_dpll   Jani Nikula
• [PATCH 07/18] drm/i915/dpll: Move away from using shared dpll   Jani Nikula
• [PATCH 08/18] drm/i915/dpll: Rename crtc_get_shared_dpll   Jani Nikula
• [PATCH 09/18] drm/i915/dpll: Change argument for enable hook in intel_dpll_funcs   Jani Nikula
• [PATCH 10/18] drm/i915/drm: Rename disable hook in intel_dpll_global_func   Jani Nikula
• [PATCH 11/18] drm/i915/dpll: Introduce new hook in intel_dpll_funcs   Jani Nikula
• [PATCH 12/18] drm/i915/dpll: Add intel_encoder argument to get_hw_state hook   Jani Nikula
• [PATCH 13/18] drm/i915/dpll: Change arguments for get_freq hook   Jani Nikula
• [PATCH 14/18] drm/i915/dpll: Rename intel_[enable/disable]_dpll   Jani Nikula
• [PATCH 15/18] drm/i915/dpll: Rename intel_unreference_dpll__crtc   Jani Nikula
• [PATCH 16/18] drm/i915/dpll: Rename intel_<release/reserve>_dpll   Jani Nikula
• [PATCH 17/18] drm/i915/dpll: Rename intel_compute_dpll   Jani Nikula
• [PATCH 18/18] drm/i915/dpll: Rename intel_update_active_dpll   Jani Nikula
• [PATCH v3 1/2] drm/i915/alpm: Make intel_alpm_enable_sink available for PSR   Jani Nikula
• [PATCH v3 1/5] drm/xe/hwmon: Add support to manage power limits though mailbox   Nilawar, Badal
• [PATCH v3 3/5] drm/xe/hwmon: Add support to manage PL2 though mailbox   Nilawar, Badal
• [PATCH v3 4/5] drm/xe/hwmon: Expose powerX_cap_interval   Nilawar, Badal
• [PATCH v3 5/5] drm/xe/hwmon: Read energy status from PMT   Nilawar, Badal
• [PATCH v5 5/5] drm/xe/hwmon: Read energy status from PMT   Nilawar, Badal
• [PATCH v5 2/5] drm/xe/hwmon: Move card reactive critical power under channel card   Nilawar, Badal
• [PATCH v5 1/5] drm/xe/hwmon: Add support to manage power limits though mailbox   Nilawar, Badal
• [PATCH v5 3/5] drm/xe/hwmon: Add support to manage PL2 though mailbox   Nilawar, Badal
• [PATCH v3] drm/xe: Add helper function to inject fault into ct_dead_capture()   Satyanarayana K V P
• ✓ CI.Patch_applied: success for drm/xe: fix devcoredump chunk alignmnent calculation (rev2)   Patchwork
• ✓ CI.checkpatch: success for drm/xe: fix devcoredump chunk alignmnent calculation (rev2)   Patchwork
• ✓ CI.KUnit: success for drm/xe: fix devcoredump chunk alignmnent calculation (rev2)   Patchwork
• ✓ CI.Build: success for drm/xe: fix devcoredump chunk alignmnent calculation (rev2)   Patchwork
• ✓ CI.Hooks: success for drm/xe: fix devcoredump chunk alignmnent calculation (rev2)   Patchwork
• ✓ CI.checksparse: success for drm/xe: fix devcoredump chunk alignmnent calculation (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe: fix devcoredump chunk alignmnent calculation (rev2)   Patchwork
• ✓ CI.Patch_applied: success for drm/xe: Add ASID to range invalidation feature flag   Patchwork
• ✓ CI.checkpatch: success for drm/xe: Add ASID to range invalidation feature flag   Patchwork
• ✓ CI.KUnit: success for drm/xe: Add ASID to range invalidation feature flag   Patchwork
• ✓ CI.Build: success for drm/xe: Add ASID to range invalidation feature flag   Patchwork
• ✓ CI.Hooks: success for drm/xe: Add ASID to range invalidation feature flag   Patchwork
• ✓ CI.checksparse: success for drm/xe: Add ASID to range invalidation feature flag   Patchwork
• ✓ CI.Patch_applied: success for drm/xe: Fix page fault queue calculation   Patchwork
• ✓ CI.checkpatch: success for drm/xe: Fix page fault queue calculation   Patchwork
• ✓ CI.KUnit: success for drm/xe: Fix page fault queue calculation   Patchwork
• ✓ CI.Build: success for drm/xe: Fix page fault queue calculation   Patchwork
• ✓ CI.Hooks: success for drm/xe: Fix page fault queue calculation   Patchwork
• ✓ CI.checksparse: success for drm/xe: Fix page fault queue calculation   Patchwork
• ✓ CI.Patch_applied: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user()   Patchwork
• ✓ CI.checkpatch: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user()   Patchwork
• ✓ CI.KUnit: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user()   Patchwork
• ✓ CI.Build: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user()   Patchwork
• ✓ CI.Hooks: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user()   Patchwork
• ✓ CI.checksparse: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user()   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe: Add ASID to range invalidation feature flag   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe: Fix page fault queue calculation   Patchwork
• ✗ Xe.CI.Full: failure for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user()   Patchwork
• ✓ CI.Patch_applied: success for drm/xe: Call svm worker only when svm is enabled   Patchwork
• ✗ CI.checkpatch: warning for drm/xe: Call svm worker only when svm is enabled   Patchwork
• ✓ CI.KUnit: success for drm/xe: Call svm worker only when svm is enabled   Patchwork
• ✓ CI.Build: success for drm/xe: Call svm worker only when svm is enabled   Patchwork
• ✓ CI.Hooks: success for drm/xe: Call svm worker only when svm is enabled   Patchwork
• ✓ CI.checksparse: success for drm/xe: Call svm worker only when svm is enabled   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe: Call svm worker only when svm is enabled   Patchwork
• ✓ CI.Patch_applied: success for drm/i915/display: remove intel_de_*() compat wrappers (rev2)   Patchwork
• ✓ CI.checkpatch: success for drm/i915/display: remove intel_de_*() compat wrappers (rev2)   Patchwork
• ✓ CI.KUnit: success for drm/i915/display: remove intel_de_*() compat wrappers (rev2)   Patchwork
• ✓ CI.Build: success for drm/i915/display: remove intel_de_*() compat wrappers (rev2)   Patchwork
• ✓ CI.Hooks: success for drm/i915/display: remove intel_de_*() compat wrappers (rev2)   Patchwork
• ✓ CI.checksparse: success for drm/i915/display: remove intel_de_*() compat wrappers (rev2)   Patchwork
• ✓ CI.Patch_applied: success for Panel Replay + Adaptive sync   Patchwork
• ✗ CI.checkpatch: warning for Panel Replay + Adaptive sync   Patchwork
• ✓ CI.KUnit: success for Panel Replay + Adaptive sync   Patchwork
• ✓ CI.Build: success for Panel Replay + Adaptive sync   Patchwork
• ✓ CI.Hooks: success for Panel Replay + Adaptive sync   Patchwork
• ✗ CI.checksparse: warning for Panel Replay + Adaptive sync   Patchwork
• ✓ CI.Patch_applied: success for drm/xe: Update migration tests.   Patchwork
• ✗ CI.checkpatch: warning for drm/xe: Update migration tests.   Patchwork
• ✓ CI.KUnit: success for drm/xe: Update migration tests.   Patchwork
• ✓ CI.Build: success for drm/xe: Update migration tests.   Patchwork
• ✓ CI.Hooks: success for drm/xe: Update migration tests.   Patchwork
• ✓ CI.checksparse: success for drm/xe: Update migration tests.   Patchwork
• ✗ Xe.CI.Full: failure for drm/i915/display: remove intel_de_*() compat wrappers (rev2)   Patchwork
• ✓ CI.Patch_applied: success for Preparations to make struct xe_ggtt private.   Patchwork
• ✗ CI.checkpatch: warning for Preparations to make struct xe_ggtt private.   Patchwork
• ✓ CI.KUnit: success for Preparations to make struct xe_ggtt private.   Patchwork
• ✓ CI.Build: success for Preparations to make struct xe_ggtt private.   Patchwork
• ✓ CI.Hooks: success for Preparations to make struct xe_ggtt private.   Patchwork
• ✓ CI.checksparse: success for Preparations to make struct xe_ggtt private.   Patchwork
• ✓ CI.Patch_applied: success for drm/ttm: Fix ttm_backup kerneldoc   Patchwork
• ✓ CI.checkpatch: success for drm/ttm: Fix ttm_backup kerneldoc   Patchwork
• ✓ CI.KUnit: success for drm/ttm: Fix ttm_backup kerneldoc   Patchwork
• ✓ CI.Build: success for drm/ttm: Fix ttm_backup kerneldoc   Patchwork
• ✓ CI.Hooks: success for drm/ttm: Fix ttm_backup kerneldoc   Patchwork
• ✓ CI.checksparse: success for drm/ttm: Fix ttm_backup kerneldoc   Patchwork
• ✗ Xe.CI.Full: failure for Panel Replay + Adaptive sync   Patchwork
• ✓ CI.Patch_applied: success for drm/ttm: Remove the struct ttm_backup abstraction   Patchwork
• ✓ CI.checkpatch: success for drm/ttm: Remove the struct ttm_backup abstraction   Patchwork
• ✓ CI.KUnit: success for drm/ttm: Remove the struct ttm_backup abstraction   Patchwork
• ✓ CI.Build: success for drm/ttm: Remove the struct ttm_backup abstraction   Patchwork
• ✓ CI.Hooks: success for drm/ttm: Remove the struct ttm_backup abstraction   Patchwork
• ✓ CI.checksparse: success for drm/ttm: Remove the struct ttm_backup abstraction   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe: Update migration tests.   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/gsc: do not flush the GSC worker from the reset path (rev2)   Patchwork
• ✓ CI.checkpatch: success for drm/xe/gsc: do not flush the GSC worker from the reset path (rev2)   Patchwork
• ✓ CI.KUnit: success for drm/xe/gsc: do not flush the GSC worker from the reset path (rev2)   Patchwork
• ✓ CI.Build: success for drm/xe/gsc: do not flush the GSC worker from the reset path (rev2)   Patchwork
• ✓ CI.Hooks: success for drm/xe/gsc: do not flush the GSC worker from the reset path (rev2)   Patchwork
• ✓ CI.checksparse: success for drm/xe/gsc: do not flush the GSC worker from the reset path (rev2)   Patchwork
• ✓ CI.Patch_applied: success for drm/xe: Call svm worker only when svm is enabled (rev2)   Patchwork
• ✓ CI.checkpatch: success for drm/xe: Call svm worker only when svm is enabled (rev2)   Patchwork
• ✓ CI.KUnit: success for drm/xe: Call svm worker only when svm is enabled (rev2)   Patchwork
• ✓ CI.Build: success for drm/xe: Call svm worker only when svm is enabled (rev2)   Patchwork
• ✓ CI.Hooks: success for drm/xe: Call svm worker only when svm is enabled (rev2)   Patchwork
• ✓ CI.checksparse: success for drm/xe: Call svm worker only when svm is enabled (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for Preparations to make struct xe_ggtt private.   Patchwork
• ✗ Xe.CI.Full: failure for drm/ttm: Fix ttm_backup kerneldoc   Patchwork
• ✓ CI.Patch_applied: success for BMG PCIe link downgrade attributes and usage (rev2)   Patchwork
• ✓ CI.checkpatch: success for BMG PCIe link downgrade attributes and usage (rev2)   Patchwork
• ✓ CI.KUnit: success for BMG PCIe link downgrade attributes and usage (rev2)   Patchwork
• ✓ CI.Build: success for BMG PCIe link downgrade attributes and usage (rev2)   Patchwork
• ✓ CI.Hooks: success for BMG PCIe link downgrade attributes and usage (rev2)   Patchwork
• ✓ CI.checksparse: success for BMG PCIe link downgrade attributes and usage (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for drm/ttm: Remove the struct ttm_backup abstraction   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe/gsc: do not flush the GSC worker from the reset path (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe: Call svm worker only when svm is enabled (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for BMG PCIe link downgrade attributes and usage (rev2)   Patchwork
• ✗ CI.Patch_applied: failure for drm/sched: Allow drivers to skip the reset with DRM_GPU_SCHED_STAT_RUNNING   Patchwork
• ✓ CI.Patch_applied: success for drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP (rev2)   Patchwork
• ✗ CI.checkpatch: warning for drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP (rev2)   Patchwork
• ✓ CI.KUnit: success for drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP (rev2)   Patchwork
• ✓ CI.Build: success for drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP (rev2)   Patchwork
• ✓ CI.Hooks: success for drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP (rev2)   Patchwork
• ✓ CI.checksparse: success for drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP (rev2)   Patchwork
• ✗ CI.Patch_applied: failure for drm/xe: Introduce xe_pm_sysfs.c   Patchwork
• ✗ Xe.CI.Full: failure for drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for Preparations to make struct xe_ggtt private.   Patchwork
• ✗ Xe.CI.BAT: failure for drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP (rev2)   Patchwork
• ✗ Xe.CI.BAT: failure for Preparations to make struct xe_ggtt private.   Patchwork
• ✓ CI.Patch_applied: success for Support active context utilization (rev2)   Patchwork
• ✓ CI.checkpatch: success for Support active context utilization (rev2)   Patchwork
• ✓ CI.KUnit: success for Support active context utilization (rev2)   Patchwork
• ✓ CI.Build: success for Support active context utilization (rev2)   Patchwork
• ✓ CI.Hooks: success for Support active context utilization (rev2)   Patchwork
• ✓ CI.checksparse: success for Support active context utilization (rev2)   Patchwork
• ✗ Xe.CI.BAT: failure for Support active context utilization (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for Support active context utilization (rev2)   Patchwork
• ✓ CI.Patch_applied: success for BMG PCIe link downgrade attributes and usage   Patchwork
• ✓ CI.checkpatch: success for BMG PCIe link downgrade attributes and usage   Patchwork
• ✓ CI.KUnit: success for BMG PCIe link downgrade attributes and usage   Patchwork
• ✓ CI.Build: success for BMG PCIe link downgrade attributes and usage   Patchwork
• ✓ CI.Hooks: success for BMG PCIe link downgrade attributes and usage   Patchwork
• ✓ CI.checksparse: success for BMG PCIe link downgrade attributes and usage   Patchwork
• ✓ Xe.CI.BAT: success for BMG PCIe link downgrade attributes and usage   Patchwork
• ✓ CI.Patch_applied: success for Enable/Disable DC balance along with VRR DSB (rev3)   Patchwork
• ✓ CI.checkpatch: success for Enable/Disable DC balance along with VRR DSB (rev3)   Patchwork
• ✓ CI.KUnit: success for Enable/Disable DC balance along with VRR DSB (rev3)   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe/vf: Fix guc_info debugfs for VFs (rev3)   Patchwork
• ✗ Xe.CI.BAT: failure for drm/xe: fix devcoredump chunk alignmnent calculation   Patchwork
• ✗ Xe.CI.BAT: failure for Introducing firmware late binding   Patchwork
• ✗ Xe.CI.BAT: failure for Prefetch Support for svm ranges (rev4)   Patchwork
• ✓ CI.Build: success for Enable/Disable DC balance along with VRR DSB (rev3)   Patchwork
• ✓ CI.Hooks: success for Enable/Disable DC balance along with VRR DSB (rev3)   Patchwork
• ✗ CI.checksparse: warning for Enable/Disable DC balance along with VRR DSB (rev3)   Patchwork
• ✗ Xe.CI.BAT: failure for drm/xe: fix devcoredump chunk alignmnent calculation   Patchwork
• ✗ Xe.CI.BAT: failure for Introducing firmware late binding   Patchwork
• ✓ Xe.CI.BAT: success for Prefetch Support for svm ranges (rev4)   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915/backlight: drop dmesg suggestion to file bugs   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe: Add helper function to inject fault into ct_dead_capture()   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP   Patchwork
• ✗ Xe.CI.BAT: failure for Introducing firmware late binding (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for Enable SVM atomics in Xe / GPU SVM (rev5)   Patchwork
• ✗ Xe.CI.BAT: failure for BMG PCIe link downgrade attributes and usage   Patchwork
• ✗ Xe.CI.BAT: failure for series starting with [1/1] drm/xe/eustall: Use copy_from_user() instead of __copy_from_user()   Patchwork
• ✓ Xe.CI.BAT: success for Prefetch Support for svm ranges (rev5)   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe: Add helper function to inject fault into ct_dead_capture() (rev2)   Patchwork
• ✗ Xe.CI.BAT: failure for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe: fix devcoredump chunk alignmnent calculation (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe: Add ASID to range invalidation feature flag   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe: Fix page fault queue calculation   Patchwork
• ✓ Xe.CI.BAT: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user()   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe: Call svm worker only when svm is enabled   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915/display: remove intel_de_*() compat wrappers (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for Panel Replay + Adaptive sync   Patchwork
• ✗ Xe.CI.BAT: failure for drm/xe: Update migration tests.   Patchwork
• ✓ Xe.CI.BAT: success for drm/ttm: Fix ttm_backup kerneldoc   Patchwork
• ✓ Xe.CI.BAT: success for Enable/Disable DC balance along with VRR DSB (rev3)   Patchwork
• ✓ Xe.CI.BAT: success for drm/ttm: Remove the struct ttm_backup abstraction   Patchwork
• ✓ CI.Patch_applied: success for ALPM rework and fixes   Patchwork
• ✓ CI.checkpatch: success for ALPM rework and fixes   Patchwork
• ✓ CI.KUnit: success for ALPM rework and fixes   Patchwork
• ✓ CI.Build: success for ALPM rework and fixes   Patchwork
• ✓ CI.Hooks: success for ALPM rework and fixes   Patchwork
• ✗ CI.checksparse: warning for ALPM rework and fixes   Patchwork
• ✓ Xe.CI.Full: success for BMG PCIe link downgrade attributes and usage   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe/gsc: do not flush the GSC worker from the reset path (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe: Call svm worker only when svm is enabled (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for BMG PCIe link downgrade attributes and usage (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915/vrr: Program EMP_AS_SDP_TL for DP AS SDP (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915/dp_mst: Add support for fractional link bpps (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915: Use intel_connector for DP and HDMI   Patchwork
• ✗ Xe.CI.BAT: failure for drm/xe: Do not print timedout job message on killed exec queues   Patchwork
• ✓ Xe.CI.BAT: success for ALPM rework and fixes   Patchwork
• ✗ Xe.CI.Full: failure for Enable/Disable DC balance along with VRR DSB (rev3)   Patchwork
• ✗ Xe.CI.Full: failure for ALPM rework and fixes   Patchwork
• ✓ CI.Patch_applied: success for drm/i915/display: minor cleanups on drm_i915_private use   Patchwork
• ✓ CI.checkpatch: success for drm/i915/display: minor cleanups on drm_i915_private use   Patchwork
• ✓ CI.KUnit: success for drm/i915/display: minor cleanups on drm_i915_private use   Patchwork
• ✓ CI.Build: success for drm/i915/display: minor cleanups on drm_i915_private use   Patchwork
• ✓ CI.Hooks: success for drm/i915/display: minor cleanups on drm_i915_private use   Patchwork
• ✗ CI.checksparse: warning for drm/i915/display: minor cleanups on drm_i915_private use   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915/display: minor cleanups on drm_i915_private use   Patchwork
• ✓ CI.Patch_applied: success for drm/i915: irq_lock refactoring, move to display   Patchwork
• ✗ CI.checkpatch: warning for drm/i915: irq_lock refactoring, move to display   Patchwork
• ✓ CI.KUnit: success for drm/i915: irq_lock refactoring, move to display   Patchwork
• ✓ CI.Build: success for drm/i915: irq_lock refactoring, move to display   Patchwork
• ✓ CI.Hooks: success for drm/i915: irq_lock refactoring, move to display   Patchwork
• ✓ CI.checksparse: success for drm/i915: irq_lock refactoring, move to display   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915: irq_lock refactoring, move to display   Patchwork
• ✗ Xe.CI.Full: failure for drm/i915/display: minor cleanups on drm_i915_private use   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/mocs: Check if all domains awake   Patchwork
• ✗ CI.checkpatch: warning for drm/xe/mocs: Check if all domains awake   Patchwork
• ✓ CI.KUnit: success for drm/xe/mocs: Check if all domains awake   Patchwork
• ✓ CI.Build: success for drm/xe/mocs: Check if all domains awake   Patchwork
• ✓ CI.Hooks: success for drm/xe/mocs: Check if all domains awake   Patchwork
• ✓ CI.checksparse: success for drm/xe/mocs: Check if all domains awake   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe/mocs: Check if all domains awake   Patchwork
• ✓ CI.Patch_applied: success for ALPM rework and fixes (rev2)   Patchwork
• ✓ CI.checkpatch: success for ALPM rework and fixes (rev2)   Patchwork
• ✓ CI.KUnit: success for ALPM rework and fixes (rev2)   Patchwork
• ✓ CI.Build: success for ALPM rework and fixes (rev2)   Patchwork
• ✓ CI.Hooks: success for ALPM rework and fixes (rev2)   Patchwork
• ✗ CI.checksparse: warning for ALPM rework and fixes (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for drm/i915: irq_lock refactoring, move to display   Patchwork
• ✓ Xe.CI.BAT: success for ALPM rework and fixes (rev2)   Patchwork
• ✓ CI.Patch_applied: success for Enable/Disable DC balance along with VRR DSB (rev4)   Patchwork
• ✓ CI.checkpatch: success for Enable/Disable DC balance along with VRR DSB (rev4)   Patchwork
• ✓ CI.KUnit: success for Enable/Disable DC balance along with VRR DSB (rev4)   Patchwork
• ✓ CI.Build: success for Enable/Disable DC balance along with VRR DSB (rev4)   Patchwork
• ✓ CI.Hooks: success for Enable/Disable DC balance along with VRR DSB (rev4)   Patchwork
• ✗ CI.checksparse: warning for Enable/Disable DC balance along with VRR DSB (rev4)   Patchwork
• ✓ Xe.CI.BAT: success for Enable/Disable DC balance along with VRR DSB (rev4)   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT (rev2)   Patchwork
• ✓ CI.checkpatch: success for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT (rev2)   Patchwork
• ✓ CI.KUnit: success for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT (rev2)   Patchwork
• ✓ CI.Build: success for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT (rev2)   Patchwork
• ✗ CI.Hooks: failure for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT (rev2)   Patchwork
• ✓ CI.checksparse: success for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT (rev2)   Patchwork
• ✗ Xe.CI.BAT: failure for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT (rev2)   Patchwork
• ✓ Xe.CI.Full: success for drm/xe/mocs: Check if all domains awake   Patchwork
• ✗ Xe.CI.Full: failure for ALPM rework and fixes (rev2)   Patchwork
• ✓ Xe.CI.Full: success for Enable/Disable DC balance along with VRR DSB (rev4)   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/ggtt: Stop relying on GGTT internals. (rev2)   Patchwork
• ✗ CI.checkpatch: warning for drm/xe/ggtt: Stop relying on GGTT internals. (rev2)   Patchwork
• ✓ CI.KUnit: success for drm/xe/ggtt: Stop relying on GGTT internals. (rev2)   Patchwork
• ✓ CI.Build: success for drm/xe/ggtt: Stop relying on GGTT internals. (rev2)   Patchwork
• ✓ CI.Hooks: success for drm/xe/ggtt: Stop relying on GGTT internals. (rev2)   Patchwork
• ✓ CI.checksparse: success for drm/xe/ggtt: Stop relying on GGTT internals. (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe/ggtt: Stop relying on GGTT internals. (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT (rev2)   Patchwork
• ✓ CI.Patch_applied: success for Enable SVM atomics in Xe / GPU SVM (rev6)   Patchwork
• ✓ CI.checkpatch: success for Enable SVM atomics in Xe / GPU SVM (rev6)   Patchwork
• ✓ CI.KUnit: success for Enable SVM atomics in Xe / GPU SVM (rev6)   Patchwork
• ✓ CI.Build: success for Enable SVM atomics in Xe / GPU SVM (rev6)   Patchwork
• ✓ CI.Hooks: success for Enable SVM atomics in Xe / GPU SVM (rev6)   Patchwork
• ✓ CI.checksparse: success for Enable SVM atomics in Xe / GPU SVM (rev6)   Patchwork
• ✓ Xe.CI.BAT: success for Enable SVM atomics in Xe / GPU SVM (rev6)   Patchwork
• ✓ CI.Patch_applied: success for Support active context utilization (rev3)   Patchwork
• ✗ CI.checkpatch: warning for Support active context utilization (rev3)   Patchwork
• ✓ CI.KUnit: success for Support active context utilization (rev3)   Patchwork
• ✓ CI.Build: success for Support active context utilization (rev3)   Patchwork
• ✓ CI.Hooks: success for Support active context utilization (rev3)   Patchwork
• ✓ CI.checksparse: success for Support active context utilization (rev3)   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe/ggtt: Stop relying on GGTT internals. (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for Support active context utilization (rev3)   Patchwork
• ✓ CI.Patch_applied: success for drm/xe: Release force wake first then runtime power   Patchwork
• ✓ CI.checkpatch: success for drm/xe: Release force wake first then runtime power   Patchwork
• ✓ CI.KUnit: success for drm/xe: Release force wake first then runtime power   Patchwork
• ✓ CI.Build: success for drm/xe: Release force wake first then runtime power   Patchwork
• ✓ CI.Hooks: success for drm/xe: Release force wake first then runtime power   Patchwork
• ✓ CI.checksparse: success for drm/xe: Release force wake first then runtime power   Patchwork
• ✗ Xe.CI.Full: failure for Enable SVM atomics in Xe / GPU SVM (rev6)   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe: Release force wake first then runtime power   Patchwork
• ✓ CI.Patch_applied: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user() (rev2)   Patchwork
• ✓ CI.checkpatch: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user() (rev2)   Patchwork
• ✓ CI.KUnit: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user() (rev2)   Patchwork
• ✓ CI.Build: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user() (rev2)   Patchwork
• ✓ CI.Hooks: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user() (rev2)   Patchwork
• ✓ CI.checksparse: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user() (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for Support active context utilization (rev3)   Patchwork
• ✓ Xe.CI.BAT: success for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user() (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe: Release force wake first then runtime power   Patchwork
• ✗ Xe.CI.Full: failure for series starting with [1/1] drm/xe: Use copy_from_user() instead of __copy_from_user() (rev2)   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/xe2hpg: Add Wa_22021007897 (rev2)   Patchwork
• ✓ CI.checkpatch: success for drm/xe/xe2hpg: Add Wa_22021007897 (rev2)   Patchwork
• ✓ CI.KUnit: success for drm/xe/xe2hpg: Add Wa_22021007897 (rev2)   Patchwork
• ✓ CI.Build: success for drm/xe/xe2hpg: Add Wa_22021007897 (rev2)   Patchwork
• ✓ CI.Hooks: success for drm/xe/xe2hpg: Add Wa_22021007897 (rev2)   Patchwork
• ✓ CI.checksparse: success for drm/xe/xe2hpg: Add Wa_22021007897 (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe/xe2hpg: Add Wa_22021007897 (rev2)   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/ptl: Disable null query for anyhit shader   Patchwork
• ✓ CI.checkpatch: success for drm/xe/ptl: Disable null query for anyhit shader   Patchwork
• ✓ CI.KUnit: success for drm/xe/ptl: Disable null query for anyhit shader   Patchwork
• ✓ CI.Build: success for drm/xe/ptl: Disable null query for anyhit shader   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe/xe2hpg: Add Wa_22021007897 (rev2)   Patchwork
• ✓ CI.Hooks: success for drm/xe/ptl: Disable null query for anyhit shader   Patchwork
• ✓ CI.checksparse: success for drm/xe/ptl: Disable null query for anyhit shader   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe/ptl: Disable null query for anyhit shader   Patchwork
• ✓ CI.Patch_applied: success for drm/xe: Add helper function to inject fault into ct_dead_capture() (rev3)   Patchwork
• ✓ CI.checkpatch: success for drm/xe: Add helper function to inject fault into ct_dead_capture() (rev3)   Patchwork
• ✓ CI.KUnit: success for drm/xe: Add helper function to inject fault into ct_dead_capture() (rev3)   Patchwork
• ✓ CI.Build: success for drm/xe: Add helper function to inject fault into ct_dead_capture() (rev3)   Patchwork
• ✓ CI.Hooks: success for drm/xe: Add helper function to inject fault into ct_dead_capture() (rev3)   Patchwork
• ✓ CI.checksparse: success for drm/xe: Add helper function to inject fault into ct_dead_capture() (rev3)   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe: Add helper function to inject fault into ct_dead_capture() (rev3)   Patchwork
• ✓ CI.Patch_applied: success for drm/i915/dram: dram_info refactoring   Patchwork
• ✓ CI.checkpatch: success for drm/i915/dram: dram_info refactoring   Patchwork
• ✓ CI.KUnit: success for drm/i915/dram: dram_info refactoring   Patchwork
• ✓ CI.Build: success for drm/i915/dram: dram_info refactoring   Patchwork
• ✓ CI.Hooks: success for drm/i915/dram: dram_info refactoring   Patchwork
• ✓ CI.checksparse: success for drm/i915/dram: dram_info refactoring   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915/dram: dram_info refactoring   Patchwork
• ✓ CI.Patch_applied: success for drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation   Patchwork
• ✓ CI.checkpatch: success for drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation   Patchwork
• ✓ CI.KUnit: success for drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation   Patchwork
• ✓ CI.Build: success for drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation   Patchwork
• ✓ CI.Hooks: success for drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation   Patchwork
• ✓ CI.checksparse: success for drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation   Patchwork
• ✓ CI.Patch_applied: success for drm/{i915, xe}: convert i915->display and xe->display into pointers (rev2)   Patchwork
• ✗ CI.checkpatch: warning for drm/{i915, xe}: convert i915->display and xe->display into pointers (rev2)   Patchwork
• ✓ CI.KUnit: success for drm/{i915, xe}: convert i915->display and xe->display into pointers (rev2)   Patchwork
• ✓ CI.Build: success for drm/{i915, xe}: convert i915->display and xe->display into pointers (rev2)   Patchwork
• ✓ CI.Hooks: success for drm/{i915, xe}: convert i915->display and xe->display into pointers (rev2)   Patchwork
• ✓ CI.checksparse: success for drm/{i915, xe}: convert i915->display and xe->display into pointers (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for drm/{i915, xe}: convert i915->display and xe->display into pointers (rev2)   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✗ CI.checkpatch: warning for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.KUnit: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.Build: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.Hooks: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.checksparse: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✗ CI.checkpatch: warning for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.KUnit: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.Build: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.Hooks: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.checksparse: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✗ CI.Patch_applied: failure for drm/xe: Fix flushing of garbage collector work   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/vsec: Allow for kernel context access   Patchwork
• ✗ CI.checkpatch: warning for drm/xe/vsec: Allow for kernel context access   Patchwork
• ✓ CI.KUnit: success for drm/xe/vsec: Allow for kernel context access   Patchwork
• ✓ CI.Build: success for drm/xe/vsec: Allow for kernel context access   Patchwork
• ✓ CI.Hooks: success for drm/xe/vsec: Allow for kernel context access   Patchwork
• ✓ CI.checksparse: success for drm/xe/vsec: Allow for kernel context access   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe/vsec: Allow for kernel context access   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✗ CI.checkpatch: warning for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.KUnit: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.Build: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.Hooks: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.checksparse: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/vsec: Allow for kernel context access (rev2)   Patchwork
• ✗ CI.checkpatch: warning for drm/xe/vsec: Allow for kernel context access (rev2)   Patchwork
• ✓ CI.KUnit: success for drm/xe/vsec: Allow for kernel context access (rev2)   Patchwork
• ✓ CI.Build: success for drm/xe/vsec: Allow for kernel context access (rev2)   Patchwork
• ✓ CI.Hooks: success for drm/xe/vsec: Allow for kernel context access (rev2)   Patchwork
• ✓ CI.checksparse: success for drm/xe/vsec: Allow for kernel context access (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe/vsec: Allow for kernel context access (rev2)   Patchwork
• ✓ CI.Patch_applied: success for Add support for Mesa GPU hang replay tool (rev4)   Patchwork
• ✗ CI.checkpatch: warning for Add support for Mesa GPU hang replay tool (rev4)   Patchwork
• ✓ CI.KUnit: success for Add support for Mesa GPU hang replay tool (rev4)   Patchwork
• ✓ CI.Build: success for Add support for Mesa GPU hang replay tool (rev4)   Patchwork
• ✓ CI.Hooks: success for Add support for Mesa GPU hang replay tool (rev4)   Patchwork
• ✓ CI.checksparse: success for Add support for Mesa GPU hang replay tool (rev4)   Patchwork
• ✗ Xe.CI.BAT: failure for Add support for Mesa GPU hang replay tool (rev4)   Patchwork
• ✓ CI.Patch_applied: success for Track FAST_REQ H2Gs to report where errors came from (rev2)   Patchwork
• ✗ CI.checkpatch: warning for Track FAST_REQ H2Gs to report where errors came from (rev2)   Patchwork
• ✓ CI.KUnit: success for Track FAST_REQ H2Gs to report where errors came from (rev2)   Patchwork
• ✓ CI.Build: success for Track FAST_REQ H2Gs to report where errors came from (rev2)   Patchwork
• ✓ CI.Hooks: success for Track FAST_REQ H2Gs to report where errors came from (rev2)   Patchwork
• ✓ CI.checksparse: success for Track FAST_REQ H2Gs to report where errors came from (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for Track FAST_REQ H2Gs to report where errors came from (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe/ptl: Disable null query for anyhit shader   Patchwork
• ✓ CI.Patch_applied: success for Wait for VRAM ready (rev2)   Patchwork
• ✓ CI.checkpatch: success for Wait for VRAM ready (rev2)   Patchwork
• ✓ CI.KUnit: success for Wait for VRAM ready (rev2)   Patchwork
• ✓ CI.Build: success for Wait for VRAM ready (rev2)   Patchwork
• ✓ CI.Hooks: success for Wait for VRAM ready (rev2)   Patchwork
• ✓ CI.checksparse: success for Wait for VRAM ready (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe: Add helper function to inject fault into ct_dead_capture() (rev3)   Patchwork
• ✓ Xe.CI.BAT: success for Wait for VRAM ready (rev2)   Patchwork
• ✓ CI.Patch_applied: success for drm/i915: refactor VLV IOSF SB for display usage (rev2)   Patchwork
• ✗ CI.checkpatch: warning for drm/i915: refactor VLV IOSF SB for display usage (rev2)   Patchwork
• ✓ CI.KUnit: success for drm/i915: refactor VLV IOSF SB for display usage (rev2)   Patchwork
• ✓ CI.Build: success for drm/i915: refactor VLV IOSF SB for display usage (rev2)   Patchwork
• ✓ CI.Hooks: success for drm/i915: refactor VLV IOSF SB for display usage (rev2)   Patchwork
• ✗ CI.checksparse: warning for drm/i915: refactor VLV IOSF SB for display usage (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915: refactor VLV IOSF SB for display usage (rev2)   Patchwork
• ✓ Xe.CI.Full: success for drm/i915/dram: dram_info refactoring   Patchwork
• ✓ CI.Patch_applied: success for drm/xe: Fix the gem shrinker name   Patchwork
• ✓ CI.checkpatch: success for drm/xe: Fix the gem shrinker name   Patchwork
• ✓ CI.KUnit: success for drm/xe: Fix the gem shrinker name   Patchwork
• ✓ CI.Build: success for drm/xe: Fix the gem shrinker name   Patchwork
• ✓ CI.Hooks: success for drm/xe: Fix the gem shrinker name   Patchwork
• ✓ CI.checksparse: success for drm/xe: Fix the gem shrinker name   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe: Fix the gem shrinker name   Patchwork
• ✗ CI.Patch_applied: failure for drm/xe: Make the gem shrinker drm managed   Patchwork
• ✗ Xe.CI.Full: failure for drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation   Patchwork
• ✓ Xe.CI.Full: success for drm/{i915, xe}: convert i915->display and xe->display into pointers (rev2)   Patchwork
• ✓ CI.Patch_applied: success for ALPM rework and fixes (rev3)   Patchwork
• ✓ CI.checkpatch: success for ALPM rework and fixes (rev3)   Patchwork
• ✓ CI.KUnit: success for ALPM rework and fixes (rev3)   Patchwork
• ✓ CI.Build: success for ALPM rework and fixes (rev3)   Patchwork
• ✓ CI.Hooks: success for ALPM rework and fixes (rev3)   Patchwork
• ✗ CI.checksparse: warning for ALPM rework and fixes (rev3)   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ Xe.CI.BAT: success for ALPM rework and fixes (rev3)   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe/vsec: Allow for kernel context access   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Patchwork
• ✓ CI.Patch_applied: success for drm/xe: Do not print engine reset message on a killed queue   Patchwork
• ✓ CI.checkpatch: success for drm/xe: Do not print engine reset message on a killed queue   Patchwork
• ✓ CI.KUnit: success for drm/xe: Do not print engine reset message on a killed queue   Patchwork
• ✓ CI.Build: success for drm/xe: Do not print engine reset message on a killed queue   Patchwork
• ✓ CI.Hooks: success for drm/xe: Do not print engine reset message on a killed queue   Patchwork
• ✓ CI.checksparse: success for drm/xe: Do not print engine reset message on a killed queue   Patchwork
• ✓ Xe.CI.Full: success for drm/xe/vsec: Allow for kernel context access (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe: Do not print engine reset message on a killed queue   Patchwork
• ✗ Xe.CI.Full: failure for Add support for Mesa GPU hang replay tool (rev4)   Patchwork
• ✗ Xe.CI.Full: failure for Track FAST_REQ H2Gs to report where errors came from (rev2)   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB   Patchwork
• ✓ CI.checkpatch: success for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB   Patchwork
• ✓ CI.KUnit: success for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB   Patchwork
• ✓ CI.Build: success for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB   Patchwork
• ✓ CI.Hooks: success for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB   Patchwork
• ✓ CI.checksparse: success for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB   Patchwork
• ✗ Xe.CI.Full: failure for Wait for VRAM ready (rev2)   Patchwork
• ✓ CI.Patch_applied: success for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed   Patchwork
• ✗ CI.checkpatch: warning for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed   Patchwork
• ✓ CI.KUnit: success for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed   Patchwork
• ✓ CI.Build: success for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed   Patchwork
• ✓ CI.Hooks: success for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed   Patchwork
• ✓ CI.checksparse: success for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed   Patchwork
• ✗ Xe.CI.Full: failure for drm/i915: refactor VLV IOSF SB for display usage (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed   Patchwork
• ✓ CI.Patch_applied: success for drm/i915/vrr: Set vrr.vmin to min Vtotal to re-enable LRR for PTL   Patchwork
• ✓ CI.checkpatch: success for drm/i915/vrr: Set vrr.vmin to min Vtotal to re-enable LRR for PTL   Patchwork
• ✓ CI.KUnit: success for drm/i915/vrr: Set vrr.vmin to min Vtotal to re-enable LRR for PTL   Patchwork
• ✓ CI.Build: success for drm/i915/vrr: Set vrr.vmin to min Vtotal to re-enable LRR for PTL   Patchwork
• ✓ CI.Hooks: success for drm/i915/vrr: Set vrr.vmin to min Vtotal to re-enable LRR for PTL   Patchwork
• ✓ CI.checksparse: success for drm/i915/vrr: Set vrr.vmin to min Vtotal to re-enable LRR for PTL   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915/vrr: Set vrr.vmin to min Vtotal to re-enable LRR for PTL   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe: Fix the gem shrinker name   Patchwork
• ✓ CI.Patch_applied: success for Modify drm helpers to use luminance (rev3)   Patchwork
• ✓ CI.checkpatch: success for Modify drm helpers to use luminance (rev3)   Patchwork
• ✓ CI.KUnit: success for Modify drm helpers to use luminance (rev3)   Patchwork
• ✓ CI.Build: success for Modify drm helpers to use luminance (rev3)   Patchwork
• ✓ CI.Hooks: success for Modify drm helpers to use luminance (rev3)   Patchwork
• ✗ CI.checksparse: warning for Modify drm helpers to use luminance (rev3)   Patchwork
• ✗ Xe.CI.Full: failure for ALPM rework and fixes (rev3)   Patchwork
• ✓ Xe.CI.BAT: success for Modify drm helpers to use luminance (rev3)   Patchwork
• ✓ CI.Patch_applied: success for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed (rev2)   Patchwork
• ✓ CI.checkpatch: success for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed (rev2)   Patchwork
• ✓ CI.KUnit: success for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed (rev2)   Patchwork
• ✓ CI.Build: success for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed (rev2)   Patchwork
• ✓ CI.Hooks: success for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed (rev2)   Patchwork
• ✓ CI.checksparse: success for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed (rev2)   Patchwork
• ✓ Xe.CI.BAT: success for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed (rev2)   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✓ CI.checkpatch: success for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✓ CI.KUnit: success for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✓ CI.Build: success for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✗ CI.Hooks: failure for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✓ CI.checksparse: success for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✗ Xe.CI.BAT: failure for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✓ CI.Patch_applied: success for drm/xe: Make the gem shrinker drm managed (rev2)   Patchwork
• ✗ CI.checkpatch: warning for drm/xe: Make the gem shrinker drm managed (rev2)   Patchwork
• ✗ CI.KUnit: failure for drm/xe: Make the gem shrinker drm managed (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe: Do not print engine reset message on a killed queue   Patchwork
• ✓ CI.Patch_applied: success for drm/xe: Make the gem shrinker drm managed (rev3)   Patchwork
• ✓ CI.checkpatch: success for drm/xe: Make the gem shrinker drm managed (rev3)   Patchwork
• ✓ CI.KUnit: success for drm/xe: Make the gem shrinker drm managed (rev3)   Patchwork
• ✓ Xe.CI.Full: success for drm/xe/vf: Post-migration recovery of GGTT nodes and CTB   Patchwork
• ✓ CI.Build: success for drm/xe: Make the gem shrinker drm managed (rev3)   Patchwork
• ✓ CI.Hooks: success for drm/xe: Make the gem shrinker drm managed (rev3)   Patchwork
• ✓ CI.checksparse: success for drm/xe: Make the gem shrinker drm managed (rev3)   Patchwork
• ✓ Xe.CI.BAT: success for drm/xe: Make the gem shrinker drm managed (rev3)   Patchwork
• ✓ CI.Patch_applied: success for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✓ CI.checkpatch: success for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✓ CI.KUnit: success for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✗ CI.Build: failure for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✗ Xe.CI.Full: failure for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed   Patchwork
• ✓ CI.Patch_applied: success for Support active context utilization (rev4)   Patchwork
• ✓ CI.checkpatch: success for Support active context utilization (rev4)   Patchwork
• ✓ CI.KUnit: success for Support active context utilization (rev4)   Patchwork
• ✓ CI.Build: success for Support active context utilization (rev4)   Patchwork
• ✓ CI.Hooks: success for Support active context utilization (rev4)   Patchwork
• ✗ Xe.CI.Full: failure for drm/i915/vrr: Set vrr.vmin to min Vtotal to re-enable LRR for PTL   Patchwork
• ✓ CI.checksparse: success for Support active context utilization (rev4)   Patchwork
• ✓ Xe.CI.BAT: success for Support active context utilization (rev4)   Patchwork
• ✗ Xe.CI.Full: failure for Modify drm helpers to use luminance (rev3)   Patchwork
• ✗ Xe.CI.Full: failure for drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed (rev2)   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Patchwork
• ✗ Xe.CI.Full: failure for drm/xe: Make the gem shrinker drm managed (rev3)   Patchwork
• ✗ Xe.CI.Full: failure for Support active context utilization (rev4)   Patchwork
• [PATCH v3 1/5] drm/xe/hwmon: Add support to manage power limits though mailbox   Poosa, Karthik
• [PATCH v4 0/5] drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Karthik Poosa
• [PATCH v4 1/5] drm/xe/hwmon: Add support to manage power limits though mailbox   Karthik Poosa
• [PATCH v4 2/5] drm/xe/hwmon: Move card reactive critical power under channel card   Karthik Poosa
• [PATCH v4 3/5] drm/xe/hwmon: Add support to manage PL2 though mailbox   Karthik Poosa
• [PATCH v4 4/5] drm/xe/hwmon: Expose powerX_cap_interval   Karthik Poosa
• [PATCH v4 5/5] drm/xe/hwmon: Read energy status from PMT   Karthik Poosa
• [PATCH v5 0/5] drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Karthik Poosa
• [PATCH v5 1/5] drm/xe/hwmon: Add support to manage power limits though mailbox   Karthik Poosa
• [PATCH v5 2/5] drm/xe/hwmon: Move card reactive critical power under channel card   Karthik Poosa
• [PATCH v5 3/5] drm/xe/hwmon: Add support to manage PL2 though mailbox   Karthik Poosa
• [PATCH v5 4/5] drm/xe/hwmon: Expose powerX_cap_interval   Karthik Poosa
• [PATCH v5 5/5] drm/xe/hwmon: Read energy status from PMT   Karthik Poosa
• [PATCH v1] drm/xe/pm: Wait for lmem ready in resume   Poosa, Karthik
• [PATCH v2 0/2] Wait for VRAM ready   Karthik Poosa
• [PATCH v2 1/2] drm/xe: Rename wait_for_lmem_ready and make it non-static   Karthik Poosa
• [PATCH v2 2/2] drm/xe/pm: Wait for vram ready in resume   Karthik Poosa
• [PATCH v5 0/5] drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Karthik Poosa
• [PATCH v5 1/5] drm/xe/hwmon: Add support to manage power limits though mailbox   Karthik Poosa
• [PATCH v5 2/5] drm/xe/hwmon: Move card reactive critical power under channel card   Karthik Poosa
• [PATCH v5 3/5] drm/xe/hwmon: Add support to manage PL2 though mailbox   Karthik Poosa
• [PATCH v5 4/5] drm/xe/hwmon: Expose powerX_cap_interval   Karthik Poosa
• [PATCH v5 5/5] drm/xe/hwmon: Read energy status from PMT   Karthik Poosa
• [PATCH v6 0/5] drm/xe/hwmon: Add mailbox power limits, PL2, read energy from PMT   Karthik Poosa
• [PATCH v6 1/5] drm/xe/hwmon: Add support to manage power limits though mailbox   Karthik Poosa
• [PATCH v6 2/5] drm/xe/hwmon: Move card reactive critical power under channel card   Karthik Poosa
• [PATCH v6 3/5] drm/xe/hwmon: Add support to manage PL2 though mailbox   Karthik Poosa
• [PATCH v6 4/5] drm/xe/hwmon: Expose powerX_cap_interval   Karthik Poosa
• [PATCH v6 5/5] drm/xe/hwmon: Read energy status from PMT   Karthik Poosa
• [PATCH 8/8] drm/panfrost: Use DRM_GPU_SCHED_STAT_RUNNING to skip the reset   Steven Price
• [PATCH v3 0/4] Support active context utilization   Umesh Nerlige Ramappa
• [PATCH v3 1/4] drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value   Umesh Nerlige Ramappa
• [PATCH v3 2/4] drm/xe: Save the gt pointer in lrc and drop the tile   Umesh Nerlige Ramappa
• [PATCH v3 3/4] drm/xe: Check 64-bit CTX timestamp for TDR when available   Umesh Nerlige Ramappa
• [PATCH v3 4/4] drm/xe: Add WA BB to capture active context utilization   Umesh Nerlige Ramappa
• ✗ Xe.CI.BAT: failure for Support active context utilization (rev2)   Umesh Nerlige Ramappa
• ✗ Xe.CI.BAT: failure for Support active context utilization (rev2)   Umesh Nerlige Ramappa
• [PATCH v3 0/4] Support active context utilization   Umesh Nerlige Ramappa
• [PATCH v4 1/4] drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value   Umesh Nerlige Ramappa
• [PATCH v4 2/4] drm/xe: Save the gt pointer in lrc and drop the tile   Umesh Nerlige Ramappa
• [PATCH v4 3/4] drm/xe: Check 64-bit CTX timestamp for TDR when available   Umesh Nerlige Ramappa
• [PATCH v4 4/4] drm/xe: Add WA BB to capture active context utilization   Umesh Nerlige Ramappa
• ✗ Xe.CI.Full: failure for Support active context utilization (rev3)   Umesh Nerlige Ramappa
• [PATCH v4 3/4] drm/xe: Check 64-bit CTX timestamp for TDR when available   Umesh Nerlige Ramappa
• [PATCH v5 0/3] Support active context utilization   Umesh Nerlige Ramappa
• [PATCH v5 1/3] drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value   Umesh Nerlige Ramappa
• [PATCH v5 2/3] drm/xe: Save the gt pointer in lrc and drop the tile   Umesh Nerlige Ramappa
• [PATCH v5 3/3] drm/xe: Add WA BB to capture active context utilization   Umesh Nerlige Ramappa
• [PATCH v4 3/4] drm/xe: Check 64-bit CTX timestamp for TDR when available   Umesh Nerlige Ramappa
• [PATCH] drm/xe/ptl: Disable null query for anyhit shader   Matt Roper
• [PATCH v2] drm/xe/xe2hpg: Add Wa_22021007897   Matt Roper
• [PATCH v2] drm/xe/vsec: Allow for kernel context access   Ruhl, Michael J
• [PATCH v2] drm/xe/vsec: Allow for kernel context access   Ruhl, Michael J
• [PATCH] drm/xe/vsec: Allow for kernel context access   Michael J. Ruhl
• [PATCH v2] drm/xe/vsec: Allow for kernel context access   Michael J. Ruhl
• [PATCH 8/8] drm/i915/irq: move i915->irq_lock to display->irq.lock   Gustavo Sousa
• [PATCH 1/8] drm/i915/irq: move locking inside vlv_display_irq_reset()   Gustavo Sousa
• [PATCH 2/8] drm/i915/irq: move locking inside valleyview_{enable, disable}_display_irqs()   Gustavo Sousa
• [PATCH 3/8] drm/i915/irq: move locking inside vlv_display_irq_postinstall()   Gustavo Sousa
• [PATCH 4/8] drm/i915/irq: split out i915_display_irq_postinstall()   Gustavo Sousa
• [PATCH 5/8] drm/i915/irq: split out i965_display_irq_postinstall()   Gustavo Sousa
• [PATCH 6/8] drm/i915/irq: make i915_enable_asle_pipestat() static   Gustavo Sousa
• [PATCH 7/8] drm/i915/rps: refactor display rps support   Gustavo Sousa
• [PATCH 0/4] drm/i915/display: minor cleanups on drm_i915_private use   Gustavo Sousa
• [PATCH 0/4] drm/{i915, xe}: convert i915->display and xe->display into pointers   Gustavo Sousa
• [PATCH] drm/xe/ptl: Disable null query for anyhit shader   Gustavo Sousa
• [PATCH v2] drm/xe/xe2hpg: Add Wa_22021007897   Gustavo Sousa
• [CI] drm/xe/gsc: do not flush the GSC worker from the reset path   Daniele Ceraolo Spurio
• [RFC 3/9] drm/xe/late_bind_fw: Introducing late_bind_fw   Daniele Ceraolo Spurio
• [RFC 2/9] mei: late_bind: add late binding component driver   Daniele Ceraolo Spurio
• [RFC 4/9] drm/xe/xe_late_bind_fw: Initialize late binding firmware   Daniele Ceraolo Spurio
• [RFC 5/9] drm/xe/xe_late_bind_fw: Load late binding firmware   Daniele Ceraolo Spurio
• [PATCH] drm/xe: Add ASID to range invalidation feature flag   Stuart Summers
• [PATCH] drm/xe: Fix page fault queue calculation   Stuart Summers
• [PATCH] drm/xe: Fix page fault queue calculation   Summers, Stuart
• [PATCH v4 01/17] drm/i915/vrr: Fix the adjustment for the fixed rr vtotal for Display < 13   Ville Syrjälä
• [PATCH v7 1/3] drm/xe: Move xe_device_sysfs_init() to xe_device_probe()   Riana Tauro
• [PATCH] drm/xe/mocs: Check if all domains awake   Tejas Upadhyay
• [PATCH] drm/xe/ptl: Disable null query for anyhit shader   Upadhyay, Tejas
• [PATCH v2] drm/xe/xe2hpg: Add Wa_22021007897   Upadhyay, Tejas
• [PATCH v2] drm/xe/xe2hpg: Add Wa_22021007897   Upadhyay, Tejas
• [PATCH] drm/i915/backlight: drop dmesg suggestion to file bugs   Tvrtko Ursulin
• [PATCH 1/8] drm/sched: Allow drivers to skip the reset and keep on running   Tvrtko Ursulin
• [PATCH 2/8] drm/sched: Always free the job after the timeout   Tvrtko Ursulin
• [PATCH 3/8] drm/sched: Reduce scheduler's timeout for timeout tests   Tvrtko Ursulin
• [PATCH 3/8] drm/sched: Reduce scheduler's timeout for timeout tests   Tvrtko Ursulin
• [PATCH 2/8] drm/sched: Always free the job after the timeout   Tvrtko Ursulin
• [PATCH 4/8] drm/sched: Add new test for DRM_GPU_SCHED_STAT_RUNNING   Tvrtko Ursulin
• [PATCH 2/8] drm/sched: Always free the job after the timeout   Tvrtko Ursulin
• [PATCH 1/8] drm/sched: Allow drivers to skip the reset and keep on running   Tvrtko Ursulin
• [RFC v2 00/13] Some (drm_sched_|dma_)fence lifetime issues   Tvrtko Ursulin
• [RFC v2 01/13] drm/i915: Use provided dma_fence_is_chain   Tvrtko Ursulin
• [RFC v2 02/13] dma-fence: Change signature of __dma_fence_is_later   Tvrtko Ursulin
• [RFC v2 03/13] dma-fence: Use a flag for 64-bit seqnos   Tvrtko Ursulin
• [RFC v2 04/13] dma-fence: Move array and chain checks to flags   Tvrtko Ursulin
• [RFC v2 05/13] dma-fence: Add helpers for accessing driver and timeline name   Tvrtko Ursulin
• [RFC v2 06/13] dma-fence: Use driver and timeline name helpers internally   Tvrtko Ursulin
• [RFC v2 07/13] sync_file: Use dma-fence driver and timeline name helpers   Tvrtko Ursulin
• [RFC v2 08/13] drm/amdgpu: Use dma-fence driver and timeline name helpers   Tvrtko Ursulin
• [RFC v2 09/13] drm/i915: Use dma-fence driver and timeline name helpers   Tvrtko Ursulin
• [RFC v2 10/13] dma-fence: Add safe access helpers and document the rules   Tvrtko Ursulin
• [RFC v2 11/13] sync_file: Protect access to driver and timeline name   Tvrtko Ursulin
• [RFC v2 12/13] drm/i915: Protect access to driver and timeline name   Tvrtko Ursulin
• [RFC v2 13/13] drm/xe: Make dma-fences compliant with the safe access rules   Tvrtko Ursulin
• [RFC 2/9] mei: late_bind: add late binding component driver   Usyskin, Alexander
• [PATCH] drm/xe: Fix flushing of garbage collector work   Niranjana Vishwanathapura
• [PATCH v2] drm/xe: fix devcoredump chunk alignmnent calculation   Rodrigo Vivi
• [RFC 9/9] {fwctl,drm}/xe/pcode: Introduce xe_pcode_fwctl   Rodrigo Vivi
• [PATCH v1] drm/xe: Introduce xe_pm_sysfs.c   Rodrigo Vivi
• [PATCH v6 1/3] drm/xe/pm: s/xe_device_sysfs_init/xe_pm_sysfs_init   Rodrigo Vivi
• [PATCH v24 3/5] drm/xe/uapi: Define drm_xe_vm_get_property   Rodrigo Vivi
• [PATCH v24 5/5] drm/xe/xe_vm: Implement xe_vm_get_property_ioctl   Rodrigo Vivi
• [PATCH] drm/xe: Release force wake first then runtime power   Rodrigo Vivi
• [PATCH v7 1/3] drm/xe: Move xe_device_sysfs_init() to xe_device_probe()   Rodrigo Vivi
• [RFC 9/9] {fwctl,drm}/xe/pcode: Introduce xe_pcode_fwctl   Rodrigo Vivi
• [PULL] drm-intel-next   Rodrigo Vivi
• [PATCH v1 2/3] PM: sleep: Introduce pm_suspend_in_progress()   Rodrigo Vivi
• [PATCH v1] drm/xe/pm: Wait for lmem ready in resume   Rodrigo Vivi
• [PATCH v3] drm/xe: Add helper function to inject fault into ct_dead_capture()   Michal Wajdeczko
• [PATCH v23 2/5] drm/xe/xe_gt_pagefault: Move pagefault struct to header   Michal Wajdeczko
• [PATCH v3 1/4] drm/xe/guc: Remove double blank line   Michal Wajdeczko
• [PATCH v3 2/4] drm/xe/guc: Add missing H2G error code definitions   Michal Wajdeczko
• [PATCH v3 3/4] drm/xe/guc: Rename CONFIG_XE_LARGE_GUC_BUFFER   Michal Wajdeczko
• [PATCH v3 4/4] drm/xe/guc: Track FAST_REQ H2Gs to report where errors came from   Michal Wajdeczko
• [PATCH v3 1/2] drm/xe/guc: Enable extended CAT error reporting   Michal Wajdeczko
• [PATCH v3 2/2] drm/xe/guc: Enable the Dynamic Inhibit Context Switch optimization   Michal Wajdeczko
• [PATCH 1/3] drm/xe/vf: use uc_fw_version to store the negotiated GuC ABI   Michal Wajdeczko
• [PATCH 2/3] drm/xe/vf: Store the GuC FW info in guc->fw   Michal Wajdeczko
• [PATCH RESEND v13 0/5] Expose modifiers/formats supported by async flips   Harry Wentland
• [PATCH v1 2/3] PM: sleep: Introduce pm_suspend_in_progress()   Rafael J. Wysocki
• [PATCH] drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed   Yu, Gareth
• [PATCH] drm/i915/display: Enforce pipeline flush with DSI HS transfer   Yu, Gareth
• [PULL] drm-misc-fixes   Thomas Zimmermann
• [PATCH] drm/i915/display: Send DSI DCS commands with pipeline flush in High Speed   gareth.yu at intel.com
• [PATCH] drm/i915/display: Enforce pipeline flush with DSI HS transfer   gareth.yu at intel.com
• [PATCH v24 3/5] drm/xe/uapi: Define drm_xe_vm_get_property   ivan.briano at intel.com
• [PATCH 06/13] drm/dp: Modify drm_edp_probe_state   kernel test robot
• [PATCH 1/3] drm/gpusvm, drm/pagemap: Move migration functionality to drm_pagemap   kernel test robot
• [drm-xe:drm-xe-next] BUILD SUCCESS 252c4711973de4e4f3ecddcc18912aecfd4e537c   kernel test robot
• [drm-xe:drm-xe-fixes] BUILD SUCCESS 564467e9d06c6352fac9100e8957d40a1a50234c   kernel test robot
• [drm-xe:drm-xe-next] BUILD SUCCESS 243bf99e2fe75edf8df1711c1377b6fc020b806c   kernel test robot

Last message date: Sat May 10 07:48:16 UTC 2025
Archived on: Sat May 10 07:49:02 UTC 2025

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...