[PATCH v6 1/5] drm/xe/hwmon: Add support to manage power limits though mailbox
Karthik Poosa
karthik.poosa at intel.com
Fri May 9 13:50:59 UTC 2025
Add support to manage power limits using pcode mailbox commands
for supported platforms.
v2:
- Address review comments. (Badal)
- Use mailbox commands instead of registers to manage power limits
for BMG.
- Clamp the maximum power limit to BIOS default value.
v3:
- Clamp power limit in write also for platforms with mailbox support.
v4:
- Remove unnecessary debug prints. (Badal)
Signed-off-by: Karthik Poosa <karthik.poosa at intel.com>
Fixes: e90f7a58e659 ("drm/xe/hwmon: Add HWMON support for BMG")
Reviewed-by: Badal Nilawar <badal.nilawar at intel.com>
---
drivers/gpu/drm/xe/regs/xe_mchbar_regs.h | 10 +-
drivers/gpu/drm/xe/regs/xe_pcode_regs.h | 4 -
drivers/gpu/drm/xe/xe_device_types.h | 4 +
drivers/gpu/drm/xe/xe_hwmon.c | 380 +++++++++++++++++------
drivers/gpu/drm/xe/xe_pci.c | 5 +
drivers/gpu/drm/xe/xe_pcode.c | 11 +
drivers/gpu/drm/xe/xe_pcode.h | 3 +
drivers/gpu/drm/xe/xe_pcode_api.h | 7 +
8 files changed, 318 insertions(+), 106 deletions(-)
diff --git a/drivers/gpu/drm/xe/regs/xe_mchbar_regs.h b/drivers/gpu/drm/xe/regs/xe_mchbar_regs.h
index f5e5234857c1..5394a1373a6b 100644
--- a/drivers/gpu/drm/xe/regs/xe_mchbar_regs.h
+++ b/drivers/gpu/drm/xe/regs/xe_mchbar_regs.h
@@ -38,10 +38,10 @@
#define TEMP_MASK REG_GENMASK(7, 0)
#define PCU_CR_PACKAGE_RAPL_LIMIT XE_REG(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
-#define PKG_PWR_LIM_1 REG_GENMASK(14, 0)
-#define PKG_PWR_LIM_1_EN REG_BIT(15)
-#define PKG_PWR_LIM_1_TIME REG_GENMASK(23, 17)
-#define PKG_PWR_LIM_1_TIME_X REG_GENMASK(23, 22)
-#define PKG_PWR_LIM_1_TIME_Y REG_GENMASK(21, 17)
+#define PWR_LIM_VAL REG_GENMASK(14, 0)
+#define PWR_LIM_EN REG_BIT(15)
+#define PWR_LIM_TIME REG_GENMASK(23, 17)
+#define PWR_LIM_TIME_X REG_GENMASK(23, 22)
+#define PWR_LIM_TIME_Y REG_GENMASK(21, 17)
#endif /* _XE_MCHBAR_REGS_H_ */
diff --git a/drivers/gpu/drm/xe/regs/xe_pcode_regs.h b/drivers/gpu/drm/xe/regs/xe_pcode_regs.h
index c7d5d782e3f9..c556a04670ee 100644
--- a/drivers/gpu/drm/xe/regs/xe_pcode_regs.h
+++ b/drivers/gpu/drm/xe/regs/xe_pcode_regs.h
@@ -18,16 +18,12 @@
#define PVC_GT0_PLATFORM_ENERGY_STATUS XE_REG(0x28106c)
#define PVC_GT0_PACKAGE_POWER_SKU XE_REG(0x281080)
-#define BMG_PACKAGE_POWER_SKU XE_REG(0x138098)
-#define BMG_PACKAGE_POWER_SKU_UNIT XE_REG(0x1380dc)
#define BMG_PACKAGE_ENERGY_STATUS XE_REG(0x138120)
#define BMG_FAN_1_SPEED XE_REG(0x138140)
#define BMG_FAN_2_SPEED XE_REG(0x138170)
#define BMG_FAN_3_SPEED XE_REG(0x1381a0)
#define BMG_VRAM_TEMPERATURE XE_REG(0x1382c0)
#define BMG_PACKAGE_TEMPERATURE XE_REG(0x138434)
-#define BMG_PACKAGE_RAPL_LIMIT XE_REG(0x138440)
#define BMG_PLATFORM_ENERGY_STATUS XE_REG(0x138458)
-#define BMG_PLATFORM_POWER_LIMIT XE_REG(0x138460)
#endif /* _XE_PCODE_REGS_H_ */
diff --git a/drivers/gpu/drm/xe/xe_device_types.h b/drivers/gpu/drm/xe/xe_device_types.h
index 495bc00ebed4..2c8321eb41b9 100644
--- a/drivers/gpu/drm/xe/xe_device_types.h
+++ b/drivers/gpu/drm/xe/xe_device_types.h
@@ -326,6 +326,10 @@ struct xe_device {
u8 has_heci_gscfi:1;
/** @info.has_llc: Device has a shared CPU+GPU last level cache */
u8 has_llc:1;
+ /** @info.has_mbx_power_limits: Device has support to manage power limits using
+ * pcode mailbox commands.
+ */
+ u8 has_mbx_power_limits:1;
/** @info.has_pxp: Device has PXP support */
u8 has_pxp:1;
/** @info.has_range_tlb_invalidation: Has range based TLB invalidations */
diff --git a/drivers/gpu/drm/xe/xe_hwmon.c b/drivers/gpu/drm/xe/xe_hwmon.c
index eb293aec36a0..c951a11758c0 100644
--- a/drivers/gpu/drm/xe/xe_hwmon.c
+++ b/drivers/gpu/drm/xe/xe_hwmon.c
@@ -51,6 +51,14 @@ enum xe_fan_channel {
FAN_MAX,
};
+/*
+ * For platforms that support mailbox commands for power limits, REG_PKG_POWER_SKU_UNIT is
+ * not supported and below are SKU units to be used.
+ */
+#define PWR_UNIT 0x3
+#define ENERGY_UNIT 0xe
+#define TIME_UNIT 0xa
+
/*
* SF_* - scale factors for particular quantities according to hwmon spec.
*/
@@ -60,6 +68,18 @@ enum xe_fan_channel {
#define SF_ENERGY 1000000 /* microjoules */
#define SF_TIME 1000 /* milliseconds */
+/*
+ * PL*_HWMON_ATTR - mapping of hardware power limits to corresponding hwmon power attribute.
+ */
+#define PL1_HWMON_ATTR hwmon_power_max
+
+#define PWR_ATTR_TO_STR(attr) (((attr) == hwmon_power_max) ? "PL1" : "Invalid")
+
+/*
+ * Timeout for power limit write mailbox command.
+ */
+#define PL_WRITE_MBX_TIMEOUT_MS (1)
+
/**
* struct xe_hwmon_energy_info - to accumulate energy
*/
@@ -100,8 +120,80 @@ struct xe_hwmon {
struct xe_hwmon_energy_info ei[CHANNEL_MAX];
/** @fi: Fan info for fanN_input */
struct xe_hwmon_fan_info fi[FAN_MAX];
+ /** @boot_power_limit_read: is boot power limits read */
+ bool boot_power_limit_read;
+ /** pl1_on_boot: power limit PL1 on boot */
+ u32 pl1_on_boot[CHANNEL_MAX];
};
+static int xe_hwmon_pcode_read_power_limit(const struct xe_hwmon *hwmon, u32 attr, int channel,
+ u32 *uval)
+{
+ struct xe_tile *root_tile = xe_device_get_root_tile(hwmon->xe);
+ u32 val0 = 0, val1 = 0;
+ int ret = 0;
+
+ ret = xe_pcode_read(root_tile, PCODE_MBOX(PCODE_POWER_SETUP,
+ (channel == CHANNEL_CARD) ?
+ READ_PSYSGPU_POWER_LIMIT :
+ READ_PACKAGE_POWER_LIMIT,
+ hwmon->boot_power_limit_read ?
+ READ_PL_FROM_PCODE : READ_PL_FROM_BIOS),
+ &val0, &val1);
+
+ if (ret) {
+ drm_dbg(&hwmon->xe->drm, "read failed ch %d val0 0x%08x, val1 0x%08x, ret %d\n",
+ channel, val0, val1, ret);
+ *uval = 0;
+ return ret;
+ }
+
+ /* return the value only if limit is enabled */
+ if (attr == PL1_HWMON_ATTR)
+ *uval = (val0 & PWR_LIM_EN) ? val0 : 0;
+ else if (attr == hwmon_power_label)
+ *uval = (val0 & PWR_LIM_EN) ? 1 : 0;
+ else
+ *uval = 0;
+
+ return ret;
+}
+
+static int xe_hwmon_pcode_write_power_limit(const struct xe_hwmon *hwmon, u32 attr, u8 channel,
+ u32 uval)
+{
+ struct xe_tile *root_tile = xe_device_get_root_tile(hwmon->xe);
+ u32 val0, val1;
+ int ret = 0;
+
+ ret = xe_pcode_read(root_tile, PCODE_MBOX(PCODE_POWER_SETUP,
+ (channel == CHANNEL_CARD) ?
+ READ_PSYSGPU_POWER_LIMIT :
+ READ_PACKAGE_POWER_LIMIT,
+ hwmon->boot_power_limit_read ?
+ READ_PL_FROM_PCODE : READ_PL_FROM_BIOS),
+ &val0, &val1);
+
+ if (ret)
+ drm_dbg(&hwmon->xe->drm, "read failed ch %d val0 0x%08x, val1 0x%08x, ret %d\n",
+ channel, val0, val1, ret);
+
+ if (attr == PL1_HWMON_ATTR)
+ val0 = uval;
+ else
+ return -EIO;
+
+ ret = xe_pcode_write64_timeout(root_tile, PCODE_MBOX(PCODE_POWER_SETUP,
+ (channel == CHANNEL_CARD) ?
+ WRITE_PSYSGPU_POWER_LIMIT :
+ WRITE_PACKAGE_POWER_LIMIT, 0),
+ val0, val1, PL_WRITE_MBX_TIMEOUT_MS);
+ if (ret)
+ drm_dbg(&hwmon->xe->drm, "write failed ch %d val0 0x%08x, val1 0x%08x, ret %d\n",
+ channel, val0, val1, ret);
+ return ret;
+}
+
static struct xe_reg xe_hwmon_get_reg(struct xe_hwmon *hwmon, enum xe_hwmon_reg hwmon_reg,
int channel)
{
@@ -122,29 +214,19 @@ static struct xe_reg xe_hwmon_get_reg(struct xe_hwmon *hwmon, enum xe_hwmon_reg
}
break;
case REG_PKG_RAPL_LIMIT:
- if (xe->info.platform == XE_BATTLEMAGE) {
- if (channel == CHANNEL_PKG)
- return BMG_PACKAGE_RAPL_LIMIT;
- else
- return BMG_PLATFORM_POWER_LIMIT;
- } else if (xe->info.platform == XE_PVC && channel == CHANNEL_PKG) {
+ if (xe->info.platform == XE_PVC && channel == CHANNEL_PKG)
return PVC_GT0_PACKAGE_RAPL_LIMIT;
- } else if ((xe->info.platform == XE_DG2) && (channel == CHANNEL_PKG)) {
+ else if ((xe->info.platform == XE_DG2) && (channel == CHANNEL_PKG))
return PCU_CR_PACKAGE_RAPL_LIMIT;
- }
break;
case REG_PKG_POWER_SKU:
- if (xe->info.platform == XE_BATTLEMAGE)
- return BMG_PACKAGE_POWER_SKU;
- else if (xe->info.platform == XE_PVC && channel == CHANNEL_PKG)
+ if (xe->info.platform == XE_PVC && channel == CHANNEL_PKG)
return PVC_GT0_PACKAGE_POWER_SKU;
else if ((xe->info.platform == XE_DG2) && (channel == CHANNEL_PKG))
return PCU_CR_PACKAGE_POWER_SKU;
break;
case REG_PKG_POWER_SKU_UNIT:
- if (xe->info.platform == XE_BATTLEMAGE)
- return BMG_PACKAGE_POWER_SKU_UNIT;
- else if (xe->info.platform == XE_PVC)
+ if (xe->info.platform == XE_PVC)
return PVC_GT0_PACKAGE_POWER_SKU_UNIT;
else if (xe->info.platform == XE_DG2)
return PCU_CR_PACKAGE_POWER_SKU_UNIT;
@@ -181,7 +263,7 @@ static struct xe_reg xe_hwmon_get_reg(struct xe_hwmon *hwmon, enum xe_hwmon_reg
return XE_REG(0);
}
-#define PL1_DISABLE 0
+#define PL_DISABLE 0
/*
* HW allows arbitrary PL1 limits to be set but silently clamps these values to
@@ -189,67 +271,83 @@ static struct xe_reg xe_hwmon_get_reg(struct xe_hwmon *hwmon, enum xe_hwmon_reg
* same pattern for sysfs, allow arbitrary PL1 limits to be set but display
* clamped values when read.
*/
-static void xe_hwmon_power_max_read(struct xe_hwmon *hwmon, int channel, long *value)
+static void xe_hwmon_power_max_read(struct xe_hwmon *hwmon, u32 attr, int channel, long *value)
{
u64 reg_val, min, max;
struct xe_device *xe = hwmon->xe;
struct xe_reg rapl_limit, pkg_power_sku;
struct xe_mmio *mmio = xe_root_tile_mmio(xe);
- rapl_limit = xe_hwmon_get_reg(hwmon, REG_PKG_RAPL_LIMIT, channel);
- pkg_power_sku = xe_hwmon_get_reg(hwmon, REG_PKG_POWER_SKU, channel);
+ mutex_lock(&hwmon->hwmon_lock);
- /*
- * Valid check of REG_PKG_RAPL_LIMIT is already done in xe_hwmon_power_is_visible.
- * So not checking it again here.
- */
- if (!xe_reg_is_valid(pkg_power_sku)) {
- drm_warn(&xe->drm, "pkg_power_sku invalid\n");
- *value = 0;
- return;
+ if (hwmon->xe->info.has_mbx_power_limits) {
+ xe_hwmon_pcode_read_power_limit(hwmon, attr, channel, (u32 *)®_val);
+ } else {
+ rapl_limit = xe_hwmon_get_reg(hwmon, REG_PKG_RAPL_LIMIT, channel);
+ pkg_power_sku = xe_hwmon_get_reg(hwmon, REG_PKG_POWER_SKU, channel);
+
+ /*
+ * Valid check of REG_PKG_RAPL_LIMIT is already done in xe_hwmon_power_is_visible.
+ * So not checking it again here.
+ */
+ if (!xe_reg_is_valid(pkg_power_sku)) {
+ drm_warn(&xe->drm, "pkg_power_sku invalid\n");
+ *value = 0;
+ goto unlock;
+ }
+ reg_val = xe_mmio_read32(mmio, rapl_limit);
}
- mutex_lock(&hwmon->hwmon_lock);
-
- reg_val = xe_mmio_read32(mmio, rapl_limit);
- /* Check if PL1 limit is disabled */
- if (!(reg_val & PKG_PWR_LIM_1_EN)) {
- *value = PL1_DISABLE;
+ /* Check if PL limits are disabled. */
+ if (!(reg_val & PWR_LIM_EN)) {
+ *value = PL_DISABLE;
+ drm_warn(&hwmon->xe->drm, "%s disabled for channel %d !, val 0x%016llx\n",
+ PWR_ATTR_TO_STR(attr), channel, reg_val);
goto unlock;
}
- reg_val = REG_FIELD_GET(PKG_PWR_LIM_1, reg_val);
+ reg_val = REG_FIELD_GET(PWR_LIM_VAL, reg_val);
*value = mul_u64_u32_shr(reg_val, SF_POWER, hwmon->scl_shift_power);
- reg_val = xe_mmio_read64_2x32(mmio, pkg_power_sku);
- min = REG_FIELD_GET(PKG_MIN_PWR, reg_val);
- min = mul_u64_u32_shr(min, SF_POWER, hwmon->scl_shift_power);
- max = REG_FIELD_GET(PKG_MAX_PWR, reg_val);
- max = mul_u64_u32_shr(max, SF_POWER, hwmon->scl_shift_power);
-
- if (min && max)
- *value = clamp_t(u64, *value, min, max);
+ /* For platforms with mailbox power limit support clamping would be done by pcode. */
+ if (!hwmon->xe->info.has_mbx_power_limits) {
+ reg_val = xe_mmio_read64_2x32(mmio, pkg_power_sku);
+ min = REG_FIELD_GET(PKG_MIN_PWR, reg_val);
+ max = REG_FIELD_GET(PKG_MAX_PWR, reg_val);
+ min = mul_u64_u32_shr(min, SF_POWER, hwmon->scl_shift_power);
+ max = mul_u64_u32_shr(max, SF_POWER, hwmon->scl_shift_power);
+ if (min && max)
+ *value = clamp_t(u64, *value, min, max);
+ }
unlock:
mutex_unlock(&hwmon->hwmon_lock);
}
-static int xe_hwmon_power_max_write(struct xe_hwmon *hwmon, int channel, long value)
+static int xe_hwmon_power_max_write(struct xe_hwmon *hwmon, u32 attr, int channel, long value)
{
struct xe_mmio *mmio = xe_root_tile_mmio(hwmon->xe);
int ret = 0;
- u64 reg_val;
+ u32 reg_val;
struct xe_reg rapl_limit;
+ mutex_lock(&hwmon->hwmon_lock);
+
rapl_limit = xe_hwmon_get_reg(hwmon, REG_PKG_RAPL_LIMIT, channel);
- mutex_lock(&hwmon->hwmon_lock);
+ /* Disable Power Limit and verify, as limit cannot be disabled on all platforms. */
+ if (value == PL_DISABLE) {
+ if (hwmon->xe->info.has_mbx_power_limits) {
+ drm_dbg(&hwmon->xe->drm, "disabling %s on channel %d\n",
+ PWR_ATTR_TO_STR(attr), channel);
+ xe_hwmon_pcode_write_power_limit(hwmon, attr, channel, 0);
+ xe_hwmon_pcode_read_power_limit(hwmon, attr, channel, ®_val);
+ } else {
+ reg_val = xe_mmio_rmw32(mmio, rapl_limit, PWR_LIM_EN, 0);
+ reg_val = xe_mmio_read32(mmio, rapl_limit);
+ }
- /* Disable PL1 limit and verify, as limit cannot be disabled on all platforms */
- if (value == PL1_DISABLE) {
- reg_val = xe_mmio_rmw32(mmio, rapl_limit, PKG_PWR_LIM_1_EN, 0);
- reg_val = xe_mmio_read32(mmio, rapl_limit);
- if (reg_val & PKG_PWR_LIM_1_EN) {
- drm_warn(&hwmon->xe->drm, "PL1 disable is not supported!\n");
+ if (reg_val & PWR_LIM_EN) {
+ drm_warn(&hwmon->xe->drm, "Power limit disable is not supported!\n");
ret = -EOPNOTSUPP;
}
goto unlock;
@@ -257,26 +355,50 @@ static int xe_hwmon_power_max_write(struct xe_hwmon *hwmon, int channel, long va
/* Computation in 64-bits to avoid overflow. Round to nearest. */
reg_val = DIV_ROUND_CLOSEST_ULL((u64)value << hwmon->scl_shift_power, SF_POWER);
- reg_val = PKG_PWR_LIM_1_EN | REG_FIELD_PREP(PKG_PWR_LIM_1, reg_val);
- reg_val = xe_mmio_rmw32(mmio, rapl_limit, PKG_PWR_LIM_1_EN | PKG_PWR_LIM_1, reg_val);
+ reg_val = PWR_LIM_EN | REG_FIELD_PREP(PWR_LIM_VAL, reg_val);
+ /*
+ * Clamp power limit to card-firmware default as maximum, as an additional protection to
+ * pcode clamp.
+ */
+ if (hwmon->xe->info.has_mbx_power_limits) {
+ if (reg_val > REG_FIELD_GET(PWR_LIM_VAL, hwmon->pl1_on_boot[channel])) {
+ reg_val = REG_FIELD_GET(PWR_LIM_VAL, hwmon->pl1_on_boot[channel]);
+ drm_dbg(&hwmon->xe->drm, "Clamping power limit to firmware default 0x%x\n",
+ reg_val);
+ }
+ }
+
+ if (hwmon->xe->info.has_mbx_power_limits)
+ ret = xe_hwmon_pcode_write_power_limit(hwmon, attr, channel, reg_val);
+ else
+ reg_val = xe_mmio_rmw32(mmio, rapl_limit, PWR_LIM_EN | PWR_LIM_VAL,
+ reg_val);
unlock:
mutex_unlock(&hwmon->hwmon_lock);
return ret;
}
-static void xe_hwmon_power_rated_max_read(struct xe_hwmon *hwmon, int channel, long *value)
+static void xe_hwmon_power_rated_max_read(struct xe_hwmon *hwmon, u32 attr, int channel,
+ long *value)
{
struct xe_mmio *mmio = xe_root_tile_mmio(hwmon->xe);
- struct xe_reg reg = xe_hwmon_get_reg(hwmon, REG_PKG_POWER_SKU, channel);
- u64 reg_val;
+ u32 reg_val;
+
+ if (hwmon->xe->info.has_mbx_power_limits) {
+ /* PL1 is rated max if supported. */
+ xe_hwmon_pcode_read_power_limit(hwmon, PL1_HWMON_ATTR, channel, ®_val);
+ } else {
+ /*
+ * This sysfs file won't be visible if REG_PKG_POWER_SKU is invalid, so valid check
+ * for this register can be skipped.
+ * See xe_hwmon_power_is_visible.
+ */
+ struct xe_reg reg = xe_hwmon_get_reg(hwmon, REG_PKG_POWER_SKU, channel);
+
+ reg_val = xe_mmio_read32(mmio, reg);
+ }
- /*
- * This sysfs file won't be visible if REG_PKG_POWER_SKU is invalid, so valid check
- * for this register can be skipped.
- * See xe_hwmon_power_is_visible.
- */
- reg_val = xe_mmio_read32(mmio, reg);
reg_val = REG_FIELD_GET(PKG_TDP, reg_val);
*value = mul_u64_u32_shr(reg_val, SF_POWER, hwmon->scl_shift_power);
}
@@ -330,23 +452,35 @@ xe_hwmon_power_max_interval_show(struct device *dev, struct device_attribute *at
struct xe_mmio *mmio = xe_root_tile_mmio(hwmon->xe);
u32 x, y, x_w = 2; /* 2 bits */
u64 r, tau4, out;
- int sensor_index = to_sensor_dev_attr(attr)->index;
+ int channel = to_sensor_dev_attr(attr)->index;
+ u32 power_attr = PL1_HWMON_ATTR;
+ int ret = 0;
xe_pm_runtime_get(hwmon->xe);
mutex_lock(&hwmon->hwmon_lock);
- r = xe_mmio_read32(mmio, xe_hwmon_get_reg(hwmon, REG_PKG_RAPL_LIMIT, sensor_index));
+ if (hwmon->xe->info.has_mbx_power_limits) {
+ ret = xe_hwmon_pcode_read_power_limit(hwmon, power_attr, channel, (u32 *)&r);
+ if (ret) {
+ drm_err(&hwmon->xe->drm,
+ "power interval read fail, ch %d, attr %d, r 0%llx, ret %d\n",
+ channel, power_attr, r, ret);
+ r = 0;
+ }
+ } else {
+ r = xe_mmio_read32(mmio, xe_hwmon_get_reg(hwmon, REG_PKG_RAPL_LIMIT, channel));
+ }
mutex_unlock(&hwmon->hwmon_lock);
xe_pm_runtime_put(hwmon->xe);
- x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
- y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
+ x = REG_FIELD_GET(PWR_LIM_TIME_X, r);
+ y = REG_FIELD_GET(PWR_LIM_TIME_Y, r);
/*
- * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
+ * tau = (1 + (x / 4)) * power(2,y), x = bits(23:22), y = bits(21:17)
* = (4 | x) << (y - 2)
*
* Here (y - 2) ensures a 1.x fixed point representation of 1.x
@@ -373,14 +507,15 @@ xe_hwmon_power_max_interval_store(struct device *dev, struct device_attribute *a
u64 tau4, r, max_win;
unsigned long val;
int ret;
- int sensor_index = to_sensor_dev_attr(attr)->index;
+ int channel = to_sensor_dev_attr(attr)->index;
+ u32 power_attr = PL1_HWMON_ATTR;
ret = kstrtoul(buf, 0, &val);
if (ret)
return ret;
/*
- * Max HW supported tau in '1.x * power(2,y)' format, x = 0, y = 0x12.
+ * Max HW supported tau in '(1 + (x / 4)) * power(2,y)' format, x = 0, y = 0x12.
* The hwmon->scl_shift_time default of 0xa results in a max tau of 256 seconds.
*
* The ideal scenario is for PKG_MAX_WIN to be read from the PKG_PWR_SKU register.
@@ -400,11 +535,13 @@ xe_hwmon_power_max_interval_store(struct device *dev, struct device_attribute *a
tau4 = (u64)((1 << x_w) | x) << y;
max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
- if (val > max_win)
+ if (val > max_win) {
+ drm_warn(&hwmon->xe->drm, "power_interval invalid val 0x%lx\n", val);
return -EINVAL;
+ }
/* val in hw units */
- val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
+ val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME) + 1;
/*
* Convert val to 1.x * power(2,y)
@@ -419,14 +556,21 @@ xe_hwmon_power_max_interval_store(struct device *dev, struct device_attribute *a
x = (val - (1ul << y)) << x_w >> y;
}
- rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
+ rxy = REG_FIELD_PREP(PWR_LIM_TIME_X, x) |
+ REG_FIELD_PREP(PWR_LIM_TIME_Y, y);
xe_pm_runtime_get(hwmon->xe);
mutex_lock(&hwmon->hwmon_lock);
- r = xe_mmio_rmw32(mmio, xe_hwmon_get_reg(hwmon, REG_PKG_RAPL_LIMIT, sensor_index),
- PKG_PWR_LIM_1_TIME, rxy);
+ if (hwmon->xe->info.has_mbx_power_limits) {
+ ret = xe_hwmon_pcode_read_power_limit(hwmon, power_attr, channel, (u32 *)&r);
+ r = (r & ~PWR_LIM_TIME) | rxy;
+ xe_hwmon_pcode_write_power_limit(hwmon, power_attr, channel, r);
+ } else {
+ r = xe_mmio_rmw32(mmio, xe_hwmon_get_reg(hwmon, REG_PKG_RAPL_LIMIT, channel),
+ PWR_LIM_TIME, rxy);
+ }
mutex_unlock(&hwmon->hwmon_lock);
@@ -435,6 +579,7 @@ xe_hwmon_power_max_interval_store(struct device *dev, struct device_attribute *a
return count;
}
+/* PSYS PL1 */
static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
xe_hwmon_power_max_interval_show,
xe_hwmon_power_max_interval_store, CHANNEL_CARD);
@@ -455,10 +600,19 @@ static umode_t xe_hwmon_attributes_visible(struct kobject *kobj,
struct device *dev = kobj_to_dev(kobj);
struct xe_hwmon *hwmon = dev_get_drvdata(dev);
int ret = 0;
+ int channel = index ? CHANNEL_PKG : CHANNEL_CARD;
+ u32 power_attr = PL1_HWMON_ATTR;
+ u32 uval;
xe_pm_runtime_get(hwmon->xe);
- ret = xe_reg_is_valid(xe_hwmon_get_reg(hwmon, REG_PKG_RAPL_LIMIT, index)) ? attr->mode : 0;
+ if (hwmon->xe->info.has_mbx_power_limits) {
+ xe_hwmon_pcode_read_power_limit(hwmon, power_attr, channel, &uval);
+ ret = (uval & PWR_LIM_EN) ? attr->mode : 0;
+ } else {
+ ret = xe_reg_is_valid(xe_hwmon_get_reg(hwmon, REG_PKG_RAPL_LIMIT,
+ channel)) ? attr->mode : 0;
+ }
xe_pm_runtime_put(hwmon->xe);
@@ -604,19 +758,27 @@ xe_hwmon_power_is_visible(struct xe_hwmon *hwmon, u32 attr, int channel)
switch (attr) {
case hwmon_power_max:
- return xe_reg_is_valid(xe_hwmon_get_reg(hwmon, REG_PKG_RAPL_LIMIT,
+ if (hwmon->xe->info.has_mbx_power_limits) {
+ xe_hwmon_pcode_read_power_limit(hwmon, attr, channel, &uval);
+ return (uval) ? 0664 : 0;
+ } else {
+ return xe_reg_is_valid(xe_hwmon_get_reg(hwmon, REG_PKG_RAPL_LIMIT,
channel)) ? 0664 : 0;
+ }
case hwmon_power_rated_max:
- return xe_reg_is_valid(xe_hwmon_get_reg(hwmon, REG_PKG_POWER_SKU,
- channel)) ? 0444 : 0;
+ if (hwmon->xe->info.has_mbx_power_limits)
+ return 0;
+ else
+ return xe_reg_is_valid(xe_hwmon_get_reg(hwmon, REG_PKG_POWER_SKU,
+ channel)) ? 0444 : 0;
case hwmon_power_crit:
- if (channel == CHANNEL_PKG)
- return (xe_hwmon_pcode_read_i1(hwmon, &uval) ||
- !(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
- break;
case hwmon_power_label:
- return xe_reg_is_valid(xe_hwmon_get_reg(hwmon, REG_PKG_POWER_SKU_UNIT,
- channel)) ? 0444 : 0;
+ if (channel == CHANNEL_PKG) {
+ xe_hwmon_pcode_read_i1(hwmon, &uval);
+ return (uval & POWER_SETUP_I1_WATTS) ? (attr == hwmon_power_label) ?
+ 0444 : 0644 : 0;
+ }
+ break;
default:
return 0;
}
@@ -628,10 +790,10 @@ xe_hwmon_power_read(struct xe_hwmon *hwmon, u32 attr, int channel, long *val)
{
switch (attr) {
case hwmon_power_max:
- xe_hwmon_power_max_read(hwmon, channel, val);
+ xe_hwmon_power_max_read(hwmon, attr, channel, val);
return 0;
case hwmon_power_rated_max:
- xe_hwmon_power_rated_max_read(hwmon, channel, val);
+ xe_hwmon_power_rated_max_read(hwmon, attr, channel, val);
return 0;
case hwmon_power_crit:
return xe_hwmon_power_curr_crit_read(hwmon, channel, val, SF_POWER);
@@ -645,7 +807,7 @@ xe_hwmon_power_write(struct xe_hwmon *hwmon, u32 attr, int channel, long val)
{
switch (attr) {
case hwmon_power_max:
- return xe_hwmon_power_max_write(hwmon, channel, val);
+ return xe_hwmon_power_max_write(hwmon, attr, channel, val);
case hwmon_power_crit:
return xe_hwmon_power_curr_crit_write(hwmon, channel, val, SF_POWER);
default:
@@ -965,18 +1127,42 @@ xe_hwmon_get_preregistration_info(struct xe_hwmon *hwmon)
int channel;
struct xe_reg pkg_power_sku_unit;
- /*
- * The contents of register PKG_POWER_SKU_UNIT do not change,
- * so read it once and store the shift values.
- */
- pkg_power_sku_unit = xe_hwmon_get_reg(hwmon, REG_PKG_POWER_SKU_UNIT, 0);
- if (xe_reg_is_valid(pkg_power_sku_unit)) {
- val_sku_unit = xe_mmio_read32(mmio, pkg_power_sku_unit);
- hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
- hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
- hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
+ if (hwmon->xe->info.has_mbx_power_limits) {
+ /* Check if card firmware support mailbox power limits commands. */
+ if (xe_hwmon_pcode_read_power_limit(hwmon, PL1_HWMON_ATTR, CHANNEL_CARD,
+ &hwmon->pl1_on_boot[CHANNEL_CARD]) |
+ xe_hwmon_pcode_read_power_limit(hwmon, PL1_HWMON_ATTR, CHANNEL_PKG,
+ &hwmon->pl1_on_boot[CHANNEL_PKG])) {
+ drm_warn(&hwmon->xe->drm,
+ "Failed to read power limits, check card firmware !\n");
+ } else {
+ drm_info(&hwmon->xe->drm, "Using mailbox commands for power limits\n");
+ /* Write default limits to read from pcode from now on. */
+ xe_hwmon_pcode_write_power_limit(hwmon, PL1_HWMON_ATTR,
+ CHANNEL_CARD,
+ hwmon->pl1_on_boot[CHANNEL_CARD]);
+ xe_hwmon_pcode_write_power_limit(hwmon, PL1_HWMON_ATTR,
+ CHANNEL_PKG,
+ hwmon->pl1_on_boot[CHANNEL_PKG]);
+ hwmon->scl_shift_power = PWR_UNIT;
+ hwmon->scl_shift_energy = ENERGY_UNIT;
+ hwmon->scl_shift_time = TIME_UNIT;
+ hwmon->boot_power_limit_read = true;
+ }
+ } else {
+ drm_info(&hwmon->xe->drm, "Using register for power limits\n");
+ /*
+ * The contents of register PKG_POWER_SKU_UNIT do not change,
+ * so read it once and store the shift values.
+ */
+ pkg_power_sku_unit = xe_hwmon_get_reg(hwmon, REG_PKG_POWER_SKU_UNIT, 0);
+ if (xe_reg_is_valid(pkg_power_sku_unit)) {
+ val_sku_unit = xe_mmio_read32(mmio, pkg_power_sku_unit);
+ hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
+ hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
+ hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
+ }
}
-
/*
* Initialize 'struct xe_hwmon_energy_info', i.e. set fields to the
* first value of the energy register read
diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c
index 882398e09b7e..95a2a458e8f7 100644
--- a/drivers/gpu/drm/xe/xe_pci.c
+++ b/drivers/gpu/drm/xe/xe_pci.c
@@ -66,6 +66,7 @@ struct xe_device_desc {
u8 has_heci_gscfi:1;
u8 has_heci_cscfi:1;
u8 has_llc:1;
+ u8 has_mbx_power_limits:1;
u8 has_pxp:1;
u8 has_sriov:1;
u8 needs_scratch:1;
@@ -305,6 +306,7 @@ static const struct xe_device_desc dg2_desc = {
DG2_FEATURES,
.has_display = true,
.has_fan_control = true,
+ .has_mbx_power_limits = false,
};
static const __maybe_unused struct xe_device_desc pvc_desc = {
@@ -316,6 +318,7 @@ static const __maybe_unused struct xe_device_desc pvc_desc = {
.has_heci_gscfi = 1,
.max_remote_tiles = 1,
.require_force_probe = true,
+ .has_mbx_power_limits = false,
};
static const struct xe_device_desc mtl_desc = {
@@ -341,6 +344,7 @@ static const struct xe_device_desc bmg_desc = {
.dma_mask_size = 46,
.has_display = true,
.has_fan_control = true,
+ .has_mbx_power_limits = true,
.has_heci_cscfi = 1,
.needs_scratch = true,
};
@@ -583,6 +587,7 @@ static int xe_info_init_early(struct xe_device *xe,
xe->info.dma_mask_size = desc->dma_mask_size;
xe->info.is_dgfx = desc->is_dgfx;
xe->info.has_fan_control = desc->has_fan_control;
+ xe->info.has_mbx_power_limits = desc->has_mbx_power_limits;
xe->info.has_heci_gscfi = desc->has_heci_gscfi;
xe->info.has_heci_cscfi = desc->has_heci_cscfi;
xe->info.has_llc = desc->has_llc;
diff --git a/drivers/gpu/drm/xe/xe_pcode.c b/drivers/gpu/drm/xe/xe_pcode.c
index cf955b3ed52c..9189117fe825 100644
--- a/drivers/gpu/drm/xe/xe_pcode.c
+++ b/drivers/gpu/drm/xe/xe_pcode.c
@@ -109,6 +109,17 @@ int xe_pcode_write_timeout(struct xe_tile *tile, u32 mbox, u32 data, int timeout
return err;
}
+int xe_pcode_write64_timeout(struct xe_tile *tile, u32 mbox, u32 data0, u32 data1, int timeout)
+{
+ int err;
+
+ mutex_lock(&tile->pcode.lock);
+ err = pcode_mailbox_rw(tile, mbox, &data0, &data1, timeout, false, false);
+ mutex_unlock(&tile->pcode.lock);
+
+ return err;
+}
+
int xe_pcode_read(struct xe_tile *tile, u32 mbox, u32 *val, u32 *val1)
{
int err;
diff --git a/drivers/gpu/drm/xe/xe_pcode.h b/drivers/gpu/drm/xe/xe_pcode.h
index ba33991d72a7..de38f44f3201 100644
--- a/drivers/gpu/drm/xe/xe_pcode.h
+++ b/drivers/gpu/drm/xe/xe_pcode.h
@@ -18,6 +18,9 @@ int xe_pcode_init_min_freq_table(struct xe_tile *tile, u32 min_gt_freq,
int xe_pcode_read(struct xe_tile *tile, u32 mbox, u32 *val, u32 *val1);
int xe_pcode_write_timeout(struct xe_tile *tile, u32 mbox, u32 val,
int timeout_ms);
+int xe_pcode_write64_timeout(struct xe_tile *tile, u32 mbox, u32 data0,
+ u32 data1, int timeout);
+
#define xe_pcode_write(tile, mbox, val) \
xe_pcode_write_timeout(tile, mbox, val, 1)
diff --git a/drivers/gpu/drm/xe/xe_pcode_api.h b/drivers/gpu/drm/xe/xe_pcode_api.h
index 127d4d26c4cf..de2277d77b65 100644
--- a/drivers/gpu/drm/xe/xe_pcode_api.h
+++ b/drivers/gpu/drm/xe/xe_pcode_api.h
@@ -43,6 +43,13 @@
#define POWER_SETUP_I1_SHIFT 6 /* 10.6 fixed point format */
#define POWER_SETUP_I1_DATA_MASK REG_GENMASK(15, 0)
+#define READ_PSYSGPU_POWER_LIMIT 0x6
+#define WRITE_PSYSGPU_POWER_LIMIT 0x7
+#define READ_PACKAGE_POWER_LIMIT 0x8
+#define WRITE_PACKAGE_POWER_LIMIT 0x9
+#define READ_PL_FROM_BIOS 0x1
+#define READ_PL_FROM_PCODE 0x0
+
#define PCODE_FREQUENCY_CONFIG 0x6e
/* Frequency Config Sub Commands (param1) */
#define PCODE_MBOX_FC_SC_READ_FUSED_P0 0x0
--
2.25.1
More information about the Intel-xe
mailing list