[PATCH] drm/i915/display: Enforce pipeline flush with DSI HS transfer

[Jani Nikula]

On Fri, 09 May 2025, <gareth.yu at intel.com> wrote:
> From: Gareth Yu <gareth.yu at intel.com>
>
> With all of the boundary conditions when streaming the commands B2B in our
> validation (part of the reason we added the flush),  the Flush effectively
> serializes the transmission of each command enqueued within the command
> dispatcher to one per V. Blank line which simplifies the behavior of the
> High Speed Arbitration.
>
> So, unless we absolutely have to burst these to the Sink, we should be
> using the Pipeline Flush bit to serialize the commands.
>
> BSPEC: 19742
>
> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14247
>
> Cc: Suraj Kandpal <suraj.kandpal at intel.com>
> Cc: Jani Nikula <jani.nikula at intel.com>
> Signed-off-by: Gareth Yu <gareth.yu at intel.com>

Pushed to drm-intel-next, with the commit message nitpicks fixed, thanks
for the patch.

BR,
Jani.

> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c      | 4 ++--
>  drivers/gpu/drm/i915/display/icl_dsi_regs.h | 1 +
>  2 files changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 402b7b2e1829..f91f27067768 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -191,12 +191,12 @@ static int dsi_send_pkt_hdr(struct intel_dsi_host *host,
>  	else
>  		tmp &= ~PAYLOAD_PRESENT;
>  
> -	tmp &= ~VBLANK_FENCE;
> +	tmp &= ~(VBLANK_FENCE | LP_DATA_TRANSFER | PIPELINE_FLUSH);
>  
>  	if (enable_lpdt)
>  		tmp |= LP_DATA_TRANSFER;
>  	else
> -		tmp &= ~LP_DATA_TRANSFER;
> +		tmp |= PIPELINE_FLUSH;
>  
>  	tmp &= ~(PARAM_WC_MASK | VC_MASK | DT_MASK);
>  	tmp |= ((packet->header[0] & VC_MASK) << VC_SHIFT);
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi_regs.h b/drivers/gpu/drm/i915/display/icl_dsi_regs.h
> index d4845ac65acc..b601b7632339 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi_regs.h
> +++ b/drivers/gpu/drm/i915/display/icl_dsi_regs.h
> @@ -272,6 +272,7 @@
>  #define  PAYLOAD_PRESENT		(1 << 31)
>  #define  LP_DATA_TRANSFER		(1 << 30)
>  #define  VBLANK_FENCE			(1 << 29)
> +#define  PIPELINE_FLUSH			(1 << 28)
>  #define  PARAM_WC_MASK			(0xffff << 8)
>  #define  PARAM_WC_LOWER_SHIFT		8
>  #define  PARAM_WC_UPPER_SHIFT		16

-- 
Jani Nikula, Intel