[Libdlo] xf86 displaylink on ARM openmoko

[Bernie Thompson]

Hi Luke (and Phil),

Yea, it does seem that's it.  Expecting to resolve endian issues in
the next drop of udlfb (which will be 0.4.1).

Until then, this patch posted by Henry should work:
http://lists.freedesktop.org/archives/libdlo/2009-August/000313.html

Note also that Jaya's driver (displaylinkfb) is endian friendly also.

Thanks,
Bernie

On Wed, Nov 11, 2009 at 12:40 PM, Luke Kenneth Casson Leighton
<lkcl at lkcl.net> wrote:
> hiya bernie,
>
> as you know i lent the UD-160-A to phil hands, because he has an
> openmoko.  he managed to get a kernel compile, and from there was able
> to compile displaylink kernel mod.
>
> unfortunately the screen goes "blue" not "green", which ties in with
> the "make test" on libdlo showing a lovely pink logo at the end.
>
> then it all hangs and does nothing if you run X.  echo
> sdjkdfasjfhsdjkfsadjfkasdhfkjasdhlf > /dev/fb1 _also_ hangs.
>
> phil suspects endian-ness somewhere.  "make test" in libdlo showed
> lots and lots of successful blats-on-screen, apart from the colour
> issues.
>
> clues?
>
> l.
> _______________________________________________
> Libdlo mailing list
> Libdlo at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/libdlo
>