DHCP daemon for MBIM...

[Dan Williams]

On Tue, 2015-03-24 at 19:26 +0100, Markus Gothe wrote:
> udhcpc is a client. An MBIM must give out it’s IP-configuration, however it must not implement DHCP.
> So then one will need to parse the device configuration and set up a DHCP-server AFAIK.

Why would you need to set up a DHCP server?  Just to relay the static
configuration that the MBIM firmware sent along?  That seems odd, since
there are many ways to obtain an IP address and DHCP is just one way out
of many.

Dan

> //M
> 
> On 24 Mar 2015, at 19:22 , Peter Fässberg <pf at leissner.se> wrote:
> 
> > I’m using udhcpc in busybox.
> >  
> >  
> >  
> > // Peter
> >  
> >  
> >  
> > Från: libmbim-devel [mailto:libmbim-devel-bounces at lists.freedesktop.org] För Markus Gothe
> > Skickat: den 24 mars 2015 19:16
> > Till: libmbim (development)
> > Ämne: DHCP daemon for MBIM...
> >  
> > Which DHCP daemon do you guys recommend to use with MBIM (since it is not mandatory for the devices to support DHCP)?
> > I am considering udhcpd in busybox.
> >  
> >  
> > //Markus - The panama-hat hacker
> 
> //Markus - The panama-hat hacker
> 
> _______________________________________________
> libmbim-devel mailing list
> libmbim-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/libmbim-devel