call-failed using Huawei E398

[Thomas Schäfer]

Please try the newest version with:

Just create a /etc/qmi-network.conf file with:
APN=your.apn.here


It worked. (with a different SIM/APN, but the same device, and same 
firmware)

thomas


Am 23.08.2012 17:13, schrieb Kai Scharwies:
> 2012/8/23 Thomas Schäfer <tschaefer at t-online.de>:
>>
>> Have you the Huawei E398 (Speedstick LTE(Deutsche Telekom)) or K5005 with
>> strong vodafone-branding of the Huawei E398?
>> Because you are talking about a vodafone APN.
>>
>> Both should work. But for my better understanding, an retesting I like the
>> right name of the device.
> I have the Speedstick LTE, bought from Deutsche Telekom with a E398
> label on its backside.
> It also has the most current firmware from Telekom website. (btw: With
> the firmware it was shipped it couldn't find Vodafone's 800 MHz LTE -
> now it does)
>
>>> My steps so far:
>>>
>>> ..
>>>
>>>
>>> Did I miss a step or is this Huawei modem not yet supported?
>>
>> No,  you could even try qmi-ifupdown to find somethere in mailing-archives.
> Yes, it tried the perl script in the past and it worked (on a
> development machine).
> However perl will not be available on my target platforms. (Various
> embedded devices with Pengutronix toolchain)
> That is the reason why I was looking out for something like libqmi...
>
> 2012/8/23 Bjørn Mork <bjorn at mork.no>:
>> Or the configured APN is wrong.  From the CodeAurora QMIEnum.h:
>>
>>     eQMI_CALL_END_REASON_UNKNOWN_APN,               // 1013
>>
> Both configured APNs are correct (web.vodafone.de). Maybe libqmi
> doesn't use the first or 16th position of CGDCONT afterall?
> _______________________________________________
> libqmi-devel mailing list
> libqmi-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/libqmi-devel