test failed using Huawei E3276

[Tommy Cheng]

Hi 

I was trying to test Huawei E3276 with the latest libqmi.  But unfortunately, it is not
working.


T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=usbserial_generic
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=qmi_wwan
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=qmi_wwan
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbserial_generic
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbserial_generic
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

# ./qmicli -d /dev/cdc-wdm0 --dms-get-ids -v
[29 Aug 2012, 11:15:57] [Debug] QMI Device at '/dev/cdc-wdm0' ready
[29 Aug 2012, 11:15:57] [Debug] [/dev/cdc-wdm0] Assuming service 'dms' is supported...
[29 Aug 2012, 11:15:57] [Debug] [/dev/cdc-wdm0] Allocating new client ID...
[29 Aug 2012, 11:15:57] [Debug] [/dev/cdc-wdm0] Sending message...
<<<<<< QMUX:
<<<<<<   length  = 15
<<<<<<   flags   = 0x00
<<<<<<   service = "ctl"
<<<<<<   client  = 0
<<<<<< QMI:
<<<<<<   flags       = "none"
<<<<<<   transaction = 1
<<<<<<   tlv_length  = 4
<<<<<<   message     = "Allocate CID" (0x0022)
<<<<<< TLV:
<<<<<<   type       = "Service" (0x01)
<<<<<<   length     = 1
<<<<<<   value      = 02
<<<<<<   translated = 2

[29 Aug 2012, 11:15:57] [Debug] KEY: 01:00:00:00
[29 Aug 2012, 11:15:57] [Debug]   Service: 00
[29 Aug 2012, 11:15:57] [Debug]   Client ID: 00
[29 Aug 2012, 11:15:57] [Debug]   Transaction ID: 01:00
[29 Aug 2012, 11:15:57] -Warning ** [/dev/cdc-wdm0] QMI framing error detected
[29 Aug 2012, 11:16:02] -Warning ** [/dev/cdc-wdm0] QMI framing error detected
error: couldn't create client for the 'dms' service: CID allocation failed in the CTL client: Transaction timed out
error: couldn't create client for the 'dms' service: CID allocation failed in the CTL client: Transaction timed out