Huawei E3276 problem

[Olof Ermis]

Hi!

Tried the patch on Raspbian rpi-3.6y (Little Endian) on ARMv61 and it
worked as well. Didn't have any problem with hanging while unbind or
disconnecting.

Thanks for the support Björn and Tommy, really appreciate it!

Cheers
Olof

2012/11/13 Bjørn Mork <bjorn at mork.no>:
> Tommy Cheng <tommy7765 at yahoo.com> writes:
>
>> I will test unbinding tomorrow.  But I did notice that the system hung when I
>> tried to unload cdc_ncm.ko.
>
> Yes, that is one probable symptom if it doesn't work.
>
> Although it looks like everything should work looking at the current usb
> core.  usb_unbind_interface() start by setting
>
>         intf->condition = USB_INTERFACE_UNBINDING;
>
> before it calls driver->disconnect(intf), and
> usb_driver_release_interface() start by testing
>
>         /* don't release from within disconnect() */
>         if (iface->condition != USB_INTERFACE_BOUND)
>                 return;
>
> so calling usb_driver_release_interface() from within the driver
> disconnect() should be safe even if it is for the interface being
> disconnected.
>
> But nevermind. After thinking about it for a few more seconds, I
> concluded that it is best to avoid the extra release call in any case to
> make the bind and unbind code symmetrical and thereby easier to follow.
> So I added a control == data conditional to unbind as well.
>
>> By the way, the platform I tested on is MIPS SoC (Big Endian).  Maybe the
>> system hung problem has something to do with the platform.  I will apply
>> your patch and test it tomorrow.  Thanks a lot.
>
> Make sure you use the last one then.  There is no need to lock up the
> system to find out that we must handle the combined interface in unbind
> after all.
>
>
>
> Bjørn