qmicli: NAS set technology preference at alcatel

Thomas Schäfer tschaefer at t-online.de
Thu Jan 31 13:58:58 PST 2013 

Am Donnerstag, 31. Januar 2013, 15:34:06 schrieb Dan Williams:
> On Thu, 2013-01-31 at 21:15 +0100, Thomas Schäfer wrote:
> > /test_com_read_mode_pref:
> > ** Message: test_com_read_mode_pref: Mode preference: 0x0E (UMTS
> > only)
> 
> So the DIAG port is ttyUSB0.  What mode is the modem in as reported by
> AT^SYSSEL here?  What is reported by test-qcdm as the mode preference
> for AT^SYSSEL=0,5 (ie, LTE-only mode)?
-------------- next part --------------
at                                                                                  
OK                                                                                  
at+syssel?                                                                          
+SYSSEL: 40,2,0,0                                                                   
                                                                                    
OK
at+syssel=,5,0
OK
at+syssel?
+SYSSEL: 40,5,0,0

OK

hpmini:/home/thomas/mm/ModemManager-20130131/libqcdm/tests # ./test-qcdm --port /dev/ttyUSB0
/test_crc16_1: OK
/test_crc16_2: OK
/test_escape1: OK
/test_escape2: OK
/test_escape_unescape: OK
/test_utils_decapsulate_buffer: OK
/test_utils_encapsulate_buffer: OK
/test_utils_decapsulate_sierra_cns: OK
/test_result_string: OK
/test_result_uint32: OK
/test_result_uint8: OK
/test_result_uint8_array: OK
/test_com_port_init: OK
/test_com_version_info: 
** Message: test_com_version_info: Compiled Date: Oct 19 2012
** Message: test_com_version_info: Compiled Time: 10:51:10
** Message: test_com_version_info: Release Date: Sep 24 2012
** Message: test_com_version_info: Release Time: 22:00:00
** Message: test_com_version_info: Model: SCAQWBZM
OK
/test_com_esn: 
** Message: test_com_esn: ESN: deadd00d
OK
/test_com_mdn: OK
/test_com_read_roam_pref: 
** Message: test_com_read_roam_pref: Roam preference: 0xFF (automatic)
OK
/test_com_read_mode_pref: 
** Message: test_com_read_mode_pref: Mode preference: 0x1E (LTE only)
OK
/test_com_read_hybrid_pref: OK
/test_com_read_hdr_rev_pref: OK
/test_com_status: OK
/test_com_sw_version: OK
/test_com_status_snapshot: OK
/test_com_pilot_sets: OK
/test_com_cm_subsys_state_info: 
** Message: test_com_cm_subsys_state_info: Call State: 0 (idle)
** Message: test_com_cm_subsys_state_info: Operating Mode: 5 (online)
** Message: test_com_cm_subsys_state_info: System Mode: 5 (WCDMA)
** Message: test_com_cm_subsys_state_info: Mode Preference: 0x26 (LTE only)
** Message: test_com_cm_subsys_state_info: Band Preference: 24642432
** Message: test_com_cm_subsys_state_info: Roam Preference: 0xFF (automatic)
** Message: test_com_cm_subsys_state_info: Service Domain Preference: 2
** Message: test_com_cm_subsys_state_info: Acquisition Order Preference: 0
** Message: test_com_cm_subsys_state_info: Hybrid Preference: 0
** Message: test_com_cm_subsys_state_info: Network Selection Preference: 1
OK
/test_com_hdr_subsys_state_info: 
** Message: test_com_hdr_subsys_state_info: device does not implement the HDR subsystem
OK
/test_com_ext_logmask: 
** Message: test_com_ext_logmask: Max # Log Items: 1370 (0x55A)

OK
/test_com_event_report: 
OK
/test_com_log_config: 
** Message: test_com_log_config: Num Log Items: 1369 (0x559)
** Message: test_com_log_config:    Enabled: 0x1029
** Message: test_com_log_config:    Enabled: 0x102b


OK
/test_com_zte_subsys_status: 
** Message: test_com_zte_subsys_status: device does not implement the ZTE subsystem
OK
/test_com_nw_subsys_modem_snapshot_cdma: 
OK
/test_com_wcdma_subsys_state_info: 
** Message: test_com_wcdma_subsys_state_info: IMEI: 861170000416999
** Message: test_com_wcdma_subsys_state_info: IMSI: 
** Message: test_com_wcdma_subsys_state_info: L1 state: 8 (Deactivated)
OK
/test_com_gsm_subsys_state_info: 
** Message: test_com_gsm_subsys_state_info: IMEI: 861170000416999
** Message: test_com_gsm_subsys_state_info: IMSI: 262020429000213
** Message: test_com_gsm_subsys_state_info: MCC: 0
** Message: test_com_gsm_subsys_state_info: MNC: 0
** Message: test_com_gsm_subsys_state_info: LAC: 0x0000
** Message: test_com_gsm_subsys_state_info: Cell ID: 0x0000
** Message: test_com_gsm_subsys_state_info: CM Call State: 0 (idle)
** Message: test_com_gsm_subsys_state_info: CM Opmode: 5 (online)
** Message: test_com_gsm_subsys_state_info: CM Sysmode: 5 (WCDMA)
OK
hpmini:/home/thomas/mm/ModemManager-20130131/libqcdm/tests # 



at+syssel=,0,0
OK
at+syssel?
+SYSSEL: 40,0,0,0

OK
hpmini:/home/thomas/mm/ModemManager-20130131/libqcdm/tests # ./test-qcdm --port /dev/ttyUSB0
/test_crc16_1: OK
/test_crc16_2: OK
/test_escape1: OK
/test_escape2: OK
/test_escape_unescape: OK
/test_utils_decapsulate_buffer: OK
/test_utils_encapsulate_buffer: OK
/test_utils_decapsulate_sierra_cns: OK
/test_result_string: OK
/test_result_uint32: OK
/test_result_uint8: OK
/test_result_uint8_array: OK
/test_com_port_init: OK
/test_com_version_info: 
** Message: test_com_version_info: Compiled Date: Oct 19 2012
** Message: test_com_version_info: Compiled Time: 10:51:10
** Message: test_com_version_info: Release Date: Sep 24 2012
** Message: test_com_version_info: Release Time: 22:00:00
** Message: test_com_version_info: Model: SCAQWBZM
OK
/test_com_esn: 
** Message: test_com_esn: ESN: deadd00d
OK
/test_com_mdn: OK
/test_com_read_roam_pref: 
** Message: test_com_read_roam_pref: Roam preference: 0xFF (automatic)
OK
/test_com_read_mode_pref: 
** Message: test_com_read_mode_pref: Mode preference: 0x04 (automatic)
OK
/test_com_read_hybrid_pref: OK
/test_com_read_hdr_rev_pref: OK
/test_com_status: OK
/test_com_sw_version: OK
/test_com_status_snapshot: OK
/test_com_pilot_sets: OK
/test_com_cm_subsys_state_info: 
** Message: test_com_cm_subsys_state_info: Call State: 0 (idle)
** Message: test_com_cm_subsys_state_info: Operating Mode: 5 (online)
** Message: test_com_cm_subsys_state_info: System Mode: 5 (WCDMA)
** Message: test_com_cm_subsys_state_info: Mode Preference: 0x02 (automatic)
** Message: test_com_cm_subsys_state_info: Band Preference: 24642432
** Message: test_com_cm_subsys_state_info: Roam Preference: 0xFF (automatic)
** Message: test_com_cm_subsys_state_info: Service Domain Preference: 2
** Message: test_com_cm_subsys_state_info: Acquisition Order Preference: 0
** Message: test_com_cm_subsys_state_info: Hybrid Preference: 0
** Message: test_com_cm_subsys_state_info: Network Selection Preference: 1
OK
/test_com_hdr_subsys_state_info: 
** Message: test_com_hdr_subsys_state_info: device does not implement the HDR subsystem
OK
/test_com_ext_logmask: 
** Message: test_com_ext_logmask: Max # Log Items: 1370 (0x55A)

OK
/test_com_event_report: 
OK
/test_com_log_config: 
** Message: test_com_log_config: Num Log Items: 1369 (0x559)
** Message: test_com_log_config:    Enabled: 0x1029
** Message: test_com_log_config:    Enabled: 0x102b


OK
/test_com_zte_subsys_status: 
** Message: test_com_zte_subsys_status: device does not implement the ZTE subsystem
OK
/test_com_nw_subsys_modem_snapshot_cdma: 
OK
/test_com_wcdma_subsys_state_info: 
** Message: test_com_wcdma_subsys_state_info: IMEI: 861170000416999
** Message: test_com_wcdma_subsys_state_info: IMSI: 
** Message: test_com_wcdma_subsys_state_info: L1 state: 8 (Deactivated)
OK
/test_com_gsm_subsys_state_info: 
** Message: test_com_gsm_subsys_state_info: IMEI: 861170000416999
** Message: test_com_gsm_subsys_state_info: IMSI: 262020429000213
** Message: test_com_gsm_subsys_state_info: MCC: 0
** Message: test_com_gsm_subsys_state_info: MNC: 0
** Message: test_com_gsm_subsys_state_info: LAC: 0x0000
** Message: test_com_gsm_subsys_state_info: Cell ID: 0x0000
** Message: test_com_gsm_subsys_state_info: CM Call State: 0 (idle)
** Message: test_com_gsm_subsys_state_info: CM Opmode: 5 (online)
** Message: test_com_gsm_subsys_state_info: CM Sysmode: 5 (WCDMA)
OK
hpmini:/home/thomas/mm/ModemManager-20130131/libqcdm/tests #

More information about the libqmi-devel mailing list