Support for Aircard771S ?

Markus Gothe nietzsche at lysator.liu.se
Fri Nov 7 14:00:13 PST 2014


Gopakumar, that’s right…
The 770S is a QMI-device and use the WDS-interface for USB-tethering.
For some reason NetGear have started to use “raw-ip” more and more as a default recently, like in the case with the latest 340U firmware, which was discussed in August.

Both the 340U and the 770S exposé the QMI WDA afaik.

//M

On 07 Nov 2014, at 21:54 , Gopakumar Choorakkot Edakkunni <gopakumar.c.e at gmail.com> wrote:

> Actually what I have in hand is a 770S (have it at home, will mail out its VID/PID once I am home) though I was looking at a 771S (for verizon reasons). So from the discussions among the two of you, are you saying that one/both of you have managed to get a 770S working ?
> 
> Rgds,
> Gopa.
> 
> On Fri, Nov 7, 2014 at 11:34 AM, Markus Gothe <nietzsche at lysator.liu.se> wrote:
> Ofc I tried both methods… 1 out 10 times setting 802.3-mode actually works.
> I did not tried the GobiNet driver since it is not a feasible approach for me.
> 
> //M
> 
> On 07 Nov 2014, at 19:54 , Aleksander Morgado <aleksander at aleksander.es> wrote:
> 
> > On Fri, Nov 7, 2014 at 7:24 PM, Markus Gothe <nietzsche at lysator.liu.se> wrote:
> >> What’s the PID and VID of the 771S… A dump of endpoints might as well help us get a grip.
> >> Most likely you should try NetGear's / Sierra’s GobiNet driver in raw-ip mode. (Since I had big issues with setting the WDA on 770S to 802.3).
> >
> > Which big issues? WDA is used in the driver only if flagged as 9x15;
> > did you try to remove that flag so that it fallsback to setting data
> > mode with CTL?
> >
> > Asking this because I actually thought of using WDA instead of CTL in
> > libqmi's QmiDevice when supported by the device, as GobiNet does.
> >
> > --
> > Aleksander
> > https://aleksander.es
> 
> 
> 
> //Markus - The panama-hat hacker
> 
> 
> _______________________________________________
> libqmi-devel mailing list
> libqmi-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/libqmi-devel



//Markus - The panama-hat hacker

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/libqmi-devel/attachments/20141107/8078c094/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 195 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.freedesktop.org/archives/libqmi-devel/attachments/20141107/8078c094/attachment.sig>


More information about the libqmi-devel mailing list