QMI protocol error (26): 'NoEffect' on stopping

[Kavula Suresh]

Mark,

Can you please give more specific on Auto-Connection. I am using Sierra
MC7354 Modem, is there such kind of profile setting?

Thanks

On Wed, Aug 12, 2015 at 4:03 PM, Markus Gothe <nietzsche at lysator.liu.se>
wrote:

> Try to disable autoconnect.
>
> //M
> On 12 Aug 2015, at 23:01 , Kavula Suresh <kavulas at gmail.com> wrote:
>
> Hello,
>
> As I integrated qmi, most cases my connection with verizon is getting
> disconnecting sometimes.
>
> To reestablish connection, implemented status monitor mechanism and on
> disconnection stopping (to clear) and then restarting.
>
> For status monitoring, stop and start used qmi-network script. But
> receiving following errors.
>
> *On failure of disconnection:*
>
> Getting status with 'qmicli -d /dev/cdc-wdm0
> --wds-get-packet-service-status --client-cid=8 --client-no-release-cid'...
> Status: disconnected
>
> *After stop:*
>
> Stopping network with 'qmicli -d /dev/cdc-wdm0
> --wds-stop-network=1205846256 --client-cid=8'...
> error: couldn't stop network: QMI protocol error (26): 'NoEffect'
> Network stopped successfully
> Clearing state...
>
> *After start:*
> error: cannot re-start network, PDH already exists
> Status:ReStarted, disconnected Connection
>
>
> Can you please give some suggestions on this.
>
> Thanks,
> _______________________________________________
> libqmi-devel mailing list
> libqmi-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>
>
> //Markus - The panama-hat hacker
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/libqmi-devel/attachments/20150812/4aa4b097/attachment.html>