QMI protocol error (26): 'NoEffect' on stopping

[Markus Gothe]

Try to disable autoconnect.

//M
On 12 Aug 2015, at 23:01 , Kavula Suresh <kavulas at gmail.com> wrote:

> Hello,
> 
> As I integrated qmi, most cases my connection with verizon is getting disconnecting sometimes.
> 
> To reestablish connection, implemented status monitor mechanism and on disconnection stopping (to clear) and then restarting.
> 
> For status monitoring, stop and start used qmi-network script. But receiving following errors.
> 
> On failure of disconnection:
> 
> Getting status with 'qmicli -d /dev/cdc-wdm0 --wds-get-packet-service-status --client-cid=8 --client-no-release-cid'...
> Status: disconnected
> 
> After stop:
> 
> Stopping network with 'qmicli -d /dev/cdc-wdm0 --wds-stop-network=1205846256 --client-cid=8'...
> error: couldn't stop network: QMI protocol error (26): 'NoEffect'
> Network stopped successfully
> Clearing state...
> 
> After start:
> error: cannot re-start network, PDH already exists
> Status:ReStarted, disconnected Connection
> 
> 
> Can you please give some suggestions on this.
> 
> Thanks,
> _______________________________________________
> libqmi-devel mailing list
> libqmi-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/libqmi-devel

//Markus - The panama-hat hacker

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/libqmi-devel/attachments/20150812/227c4f62/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 186 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.freedesktop.org/archives/libqmi-devel/attachments/20150812/227c4f62/attachment.sig>