3G Modem MC8805:qmicli succesfuly connected but no IP after dhclient

[Benoît]

Thanks for your reply and excuse me to not be accurate..
Command is working and the 802-3 is set properly.
I set it before issuing the qmi-network script (and also check after if 
the status is still 802-3).

when I said no success it is related to the fact that when I tried to do 
a dhclient on my wwan interface I don't receive anything. (tcpdump is 
showing me that the dhcp request are sent properly but no reply back).

I also noticed that my interface had NOARP flag I also change it to 
support ARP but no change ..

On 10/27/15 10:59, Bjørn Mork wrote:
> "Benoît" <benoitne at gmail.com> writes:
>
>> I also tried to change the data format to 802-3
>> (|--wda-set-data-format=802-3) but no success..|
> What does "no success" mean?  I can think of 4 different
> interpretations, but that's probably just my lack of imagination...
>
> 1) Command not supported?
> 2) Command fails with an error?
> 3) Command succeeds, but a subsequent "get" shows no change?
> 4) Command succeeds, verified by "get", but dhcp still doesn't work?
>
>
> Bjørn

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/libqmi-devel/attachments/20151027/879682c1/attachment.html>