Any issues with UML290 latest firmware/.. ?

[Gopakumar Choorakkot Edakkunni]

Hi Markus,

Thanks for the quick response. I tried it just now, looks like thats
failing (previously when the 290 was working, I did not have to do this
switch).

root:~# qmicli -d /dev/cdc-wdm0  --wda-get-data-format
error: couldn't create client for the 'wda' service: QMI protocol error
(31): 'InvalidServiceType'
root:~# qmicli -d /dev/cdc-wdm0  --wda-set-data-format=802-3
error: couldn't create client for the 'wda' service: QMI protocol error
(31): 'InvalidServiceType'
root:~#

Rgds,
Gopa.

On Mon, Sep 14, 2015 at 11:07 AM, Markus Gothe <nietzsche at lysator.liu.se>
wrote:

> Did you switch of the raw-ip mode that it defaults to?
>
> //M
> On 14 Sep 2015, at 20:05 , Gopakumar Choorakkot Edakkunni <
> gopakumar.c.e at gmail.com> wrote:
>
> Hi all,
>
> I had UML290 working perfectly fine a couple of months back in my openwrt
> box, I dont recollect its firmware version/details though. Now I purchased
> a new UML290 and that doesnt work ! wwan0 interface is created, but it
> doesnt respond to dhcp requests, no IP address is allocated.
>
> The sequence to get this modem working was very straightforward - I used
> to do a --nat-get-home-network and that gives me the APN, and then I would
> do a --wds-start-network=<apn> .. Now the nas-get-home-network fails
> (attached some logs), even if I go ahead and do a
> --wds-start-network=vzwinternet, it results in an error.  Any clues that I
> can look for ? Thanks for you time!!
>
> Rgds,
> Gopa.
>
>
> <lsusb.290><ifconfig.290><nas_get_home.290><wds_start_network.290>
> _______________________________________________
> libqmi-devel mailing list
> libqmi-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>
>
> //Markus - The panama-hat hacker
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/libqmi-devel/attachments/20150914/711789a4/attachment.html>