Any issues with UML290 latest firmware/.. ?

[Markus Gothe]

Try using ' --device- open-net="net-802-3|net-no-qos-header”'

//M
On 14 Sep 2015, at 20:16 , Gopakumar Choorakkot Edakkunni <gopakumar.c.e at gmail.com> wrote:

> Hi Markus,
> 
> Thanks for the quick response. I tried it just now, looks like thats failing (previously when the 290 was working, I did not have to do this switch).
> 
> root:~# qmicli -d /dev/cdc-wdm0  --wda-get-data-format
> error: couldn't create client for the 'wda' service: QMI protocol error (31): 'InvalidServiceType'
> root:~# qmicli -d /dev/cdc-wdm0  --wda-set-data-format=802-3
> error: couldn't create client for the 'wda' service: QMI protocol error (31): 'InvalidServiceType'
> root:~#
> 
> Rgds,
> Gopa.
> 
> On Mon, Sep 14, 2015 at 11:07 AM, Markus Gothe <nietzsche at lysator.liu.se> wrote:
> Did you switch of the raw-ip mode that it defaults to?
> 
> //M
> On 14 Sep 2015, at 20:05 , Gopakumar Choorakkot Edakkunni <gopakumar.c.e at gmail.com> wrote:
> 
>> Hi all,
>> 
>> I had UML290 working perfectly fine a couple of months back in my openwrt box, I dont recollect its firmware version/details though. Now I purchased a new UML290 and that doesnt work ! wwan0 interface is created, but it doesnt respond to dhcp requests, no IP address is allocated.
>> 
>> The sequence to get this modem working was very straightforward - I used to do a --nat-get-home-network and that gives me the APN, and then I would do a --wds-start-network=<apn> .. Now the nas-get-home-network fails (attached some logs), even if I go ahead and do a --wds-start-network=vzwinternet, it results in an error.  Any clues that I can look for ? Thanks for you time!!
>> 
>> Rgds,
>> Gopa.
>> 
>> 
>> <lsusb.290><ifconfig.290><nas_get_home.290><wds_start_network.290>_______________________________________________
>> libqmi-devel mailing list
>> libqmi-devel at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/libqmi-devel
> 
> //Markus - The panama-hat hacker
> 
> 

//Markus - The panama-hat hacker

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/libqmi-devel/attachments/20150914/dd4e2388/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 186 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.freedesktop.org/archives/libqmi-devel/attachments/20150914/dd4e2388/attachment.sig>