dhclient failed on MC7354

[Aleksander Morgado]

On Thu, Apr 6, 2017 at 11:52 AM, dailijin <dailijin126 at 126.com> wrote:
> I also encountered this issue when use MC7304 modem, the reason is same with
> what you mentioned. when execute command "tvu-qmicli -d /dev/cdc-wdm3
> --wda-set-data-format=802-3" always fail, so always get IP via dhclient
> fail.
>
> If I reset the modem by manual, the modem maybe can work normally.
>
> Below is the log when set data format fail. how do I directly solve this
> issue without reset modem? my libqmi version is 1.10.2
>
> tvupack TVUTransporter # tvu-qmicli -d /dev/cdc-wdm3
> --wda-set-data-format=802-3  -v
> error: couldn't create client for the 'wda' service: QMI protocol error (3):
> 'Internal'

Not sure I've ever seen such an error when allocating a CID for WDA
service; the MC7304 should support that without any problem. What
system is this? Is the libqmi/qmicli different from the upstream one?
(I see the cli named as "tvu-qmicli" instead of "qmicli")

-- 
Aleksander
https://aleksander.es