Reg: IPv6 on MC7354
Balaji Sivakumar
shivbalaji1985 at gmail.com
Mon Feb 6 17:19:54 UTC 2017
Hi,
I have tried the ip-type option but it throws following error when i try to
create a dual stack connection using single /dev/cdc-wdmx device
*>>>>>> translated = FAILURE: PolicyMismatch*
*error: couldn't start network: QMI protocol error (79): 'PolicyMismatch'*
this is the procedure i follow,
qmicli -p -d /dev/cdc-wdmx --wds-noop --client-no-release-cid
[/dev/cdc-wdmx] Client ID not released:
Service: 'wds'
CID: 'x'
qmicli -v -p -d /dev/cdc-wdmx --wds-start-network=apn=VZWINTERNET,ip-type=4
--client-cid=x --client-no-release-cid
[/dev/cdc-wdmx] Network started
qmicli -p -d /dev/cdc-wdmx --wds-noop --client-no-release-cid
[/dev/cdc-wdmx] Client ID not released:
Service: 'wds'
CID: 'y'
qmicli -v -p -d /dev/cdc-wdmx --wds-start-network=apn=VZWINTERNET,ip-type=6
--client-cid=y --client-no-release-cid
>>>>>> translated = FAILURE: PolicyMismatch
error: couldn't start network: QMI protocol error (79): 'PolicyMismatch'
Any idea on this error or suggestion to overcome this error.
Thanks
Balaji
On Sun, Feb 5, 2017 at 2:12 PM, Aleksander Morgado <aleksander at aleksander.es
> wrote:
> On Sun, Feb 5, 2017 at 8:56 PM, Balaji Sivakumar
> <shivbalaji1985 at gmail.com> wrote:
> > Thanks Alessander for the reply. But I don't see the version qmicli am
> using
> > suooort that ip- type option.
> >
> > I have seen in one of the forum discussing about that adding a patch for
> > that option, will try that.
> >
> > Is the option included in recent version ?
>
> There is no stable version yet with the ip-type option support in WDS
> Start Network (commit 81c213791e794311a01f3f69e763eb9b10c84f4d), but
> you can use the 1.17.900 I tagged a couple of weeks ago:
> https://www.freedesktop.org/software/libqmi/libqmi-1.17.900.tar.xz
>
>
> --
> Aleksander
> https://aleksander.es
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libqmi-devel/attachments/20170206/ce0e3472/attachment.html>
More information about the libqmi-devel
mailing list