MC7455 PROBLEM
heni wael
waelheni91 at gmail.com
Tue Jan 17 07:24:22 UTC 2017
After this 3 commands i got this
[root at mc7455-1-qpcs-local ~]# qmicli -d /dev/cdc-wdm0
--wds-get-current-settings
error: couldn't get current settings: QMI protocol error (15): 'OutOfCall'
2017-01-17 8:21 GMT+01:00 heni wael <waelheni91 at gmail.com>:
> Thanks for your help
>
> I show you the result of this commands :
>
>
> 1- qmicli -d /dev/cdc-wdm0 --wda-get-data-format -v
>
> http://pastebin.com/jXqiFCmy
>
> 2-
> [root at mc7455-1-qpcs-local ~]# qmicli -d /dev/cdc-wdm0
> --set-expected-data-format=raw-ip -v
> [17 ينا 2017, 02:14:28] [Debug] [/dev/cdc-wdm0] Opening device with flags
> 'none'...
> [17 ينا 2017, 02:14:28] [Debug] QMI Device at '/dev/cdc-wdm0' ready
> [17 ينا 2017, 02:14:28] [Debug] Setting expected WWAN data format this
> control port...
> [17 ينا 2017, 02:14:28] [Debug] [/dev/cdc-wdm0] Writing expected data
> format to: /sys/class/net/wwp0s20u4i8/qmi/raw_ip
> [17 ينا 2017, 02:14:28] [Debug] [/dev/cdc-wdm0] Reading expected data
> format from: /sys/class/net/wwp0s20u4i8/qmi/raw_ip
> [/dev/cdc-wdm0] expected data format set to: raw-ip
>
>
> 3- qmicli -d /dev/cdc-wdm0 --wds-start-network="apn=,wxxx.vzwstatic,ip-type=4"
> --device-open-net="net-raw-ip|net-no-qos-header" --device-open-sync
> --client-no-release-cid -v
>
> http://pastebin.com/NZwsBHmd
>
> Waiting your answer
>
> 2017-01-17 8:20 GMT+01:00 heni wael <waelheni91 at gmail.com>:
>
>> Thanks for your help
>>
>> I show you the result of this commands :
>>
>>
>> 1- qmicli -d /dev/cdc-wdm0 --wda-get-data-format -v
>>
>> http://pastebin.com/jXqiFCmy
>>
>> 2-
>> [root at mc7455-1-qpcs-local ~]# qmicli -d /dev/cdc-wdm0
>> --set-expected-data-format=raw-ip -v
>> [17 ينا 2017, 02:14:28] [Debug] [/dev/cdc-wdm0] Opening device with flags
>> 'none'...
>> [17 ينا 2017, 02:14:28] [Debug] QMI Device at '/dev/cdc-wdm0' ready
>> [17 ينا 2017, 02:14:28] [Debug] Setting expected WWAN data format this
>> control port...
>> [17 ينا 2017, 02:14:28] [Debug] [/dev/cdc-wdm0] Writing expected data
>> format to: /sys/class/net/wwp0s20u4i8/qmi/raw_ip
>> [17 ينا 2017, 02:14:28] [Debug] [/dev/cdc-wdm0] Reading expected data
>> format from: /sys/class/net/wwp0s20u4i8/qmi/raw_ip
>> [/dev/cdc-wdm0] expected data format set to: raw-ip
>>
>>
>> 3- qmicli -d /dev/cdc-wdm0 --wds-start-network="apn=,wxxx.vzwstatic,ip-type=4"
>> --device-open-net="net-raw-ip|net-no-qos-header" --device-open-sync
>> --client-no-release-cid
>>
>> http://pastebin.com/NZwsBHmd
>>
>> Waiting your answer
>>
>>
>>
>> 2017-01-16 22:32 GMT+01:00 Tang Nguyen <tang_nguyen at yahoo.com>:
>>
>>> AT+CGCCONTRDP replies the Bearer information which is IPv4 address. It
>>> means your modem
>>> has successfully registered to nework. Problem that you have now is
>>> qmicli fails to setup a data channel bewteen host and modem. Nothing wrong
>>> with your modem, SIM and VZ network.
>>>
>>> Try below commands to see any help. (you migh want to add -v (verbose)
>>> option to get more debug information from libqmi commands)
>>>
>>> qmicli -d /dev/cdc-wdm0 --wda-get-data-format
>>> qmicli -d /dev/cdc-wdm0 --set-expected-data-format=raw-ip
>>> qmicli -d /dev/cdc-wdm0 --wds-start-network="apn=,wxxx.vzwstatic,ip-type=4"
>>> --device-open-net="net-raw-ip|net-no-qos-header" --device-open-sync
>>> --client-no-release-cid
>>>
>>>
>>> Above commands try to set raw-ip data link , and force connection with
>>> IPV4. APN from qmicli command must be matched with the one you get from
>>> at+cgdcont?, if not connectiion would fail.
>>>
>>> If you got packet-data handle, command "qmicli -d /dev/cdc-wdm0
>>> --wds-get-current-settings" shows you the connectivity status.
>>>
>>>
>>>
>>> --tang
>>>
>>>
>>> --------------------------------------------
>>> On Mon, 1/16/17, heni wael <waelheni91 at gmail.com> wrote:
>>>
>>> Subject: Re: MC7455 PROBLEM
>>> To: libqmi-devel at lists.freedesktop.org
>>> Date: Monday, January 16, 2017, 3:35 PM
>>>
>>> Other thing
>>>
>>>
>>> i have this
>>> qmicli -d /dev/cdc-wdm0
>>> --wds-get-current-settings
>>> error:
>>> couldn't get current settings: QMI protocol error (15):
>>> 'OutOfCall'
>>>
>>>
>>> but when i use this AT command
>>> "AT+CGCONTRDP" i got this result
>>> +CGCONTRDP:
>>> 1,5,wxxx.vzwstatic,166.164.108.xxx,,198.224.173.xxx,198.224.174.xxx
>>>
>>>
>>> 2017-01-16 21:14 GMT+01:00
>>> heni wael <waelheni91 at gmail.com>:
>>> Thanks Tang ,
>>>
>>> i got this
>>> at+cgdcont?
>>>
>>> +CGDCONT:
>>> 1,"IP","xx01.vzwstatic","0.0.0
>>> .0",0,0,0,0
>>> 2017-01-16 21:14 GMT+01:00
>>> heni wael <waelheni91 at gmail.com>:
>>> Thanks Tang
>>> ,
>>>
>>> i got this
>>> at+cgdcont?
>>>
>>> +CGDCONT:
>>> 1,"IP","xx01.vzwstatic","0.0.0
>>> .0",0,0,0,0
>>>
>>>
>>> 2017-01-16 18:17 GMT+01:00
>>> Tang Nguyen <tang_nguyen at yahoo.com>:
>>> Hi Heni,
>>>
>>>
>>>
>>> Can you make sure you have below patch from Dan in your 16.2
>>> build.
>>>
>>>
>>>
>>> commit 4c678418f398fc5f9dcdb216c0ffdf fc8524bea2
>>>
>>>
>>>
>>> qmicli: fix handling of unspecified ip_type in
>>> --wds-start-network
>>>
>>> QMI_WDS_IP_FAMILY_UNSPECIFIED = 8 but ip_type gets
>>> initialized to 0, so the "IP Family Preference"
>>> was always being sent with an unrecognized value. Fixes:
>>> 81c21379 qmicli: add support for IP type to
>>> --wds-start-network
>>>
>>>
>>>
>>> --tang
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> ------------------------------ --------------
>>>
>>> On Mon, 1/16/17, heni wael <waelheni91 at gmail.com>
>>> wrote:
>>>
>>>
>>>
>>> Subject: Re: MC7455 PROBLEM
>>>
>>> To: libqmi-devel at lists.freedesktop
>>> .org
>>>
>>> Date: Monday, January 16, 2017, 11:25 AM
>>>
>>>
>>>
>>> I installed qmicli last version 16.2
>>>
>>> and i got this now
>>>
>>> [root at mc7455-1-qpcs-local ~]# qmi-network
>>>
>>> /dev/cdc-wdm0 start
>>>
>>> Loading profile at
>>>
>>> /etc/qmi-network.conf...
>>>
>>> APN:
>>>
>>> xxxx.vzwstatic
>>>
>>> APN user: unset
>>>
>>> APN password: unset
>>>
>>> qmi-proxy: no
>>>
>>> Checking
>>>
>>> data format with 'qmicli -d /dev/cdc-wdm0
>>>
>>> --wda-get-data-format '...
>>>
>>> Device link
>>>
>>> layer protocol retrieved: raw-ip
>>>
>>> Getting
>>>
>>> expected data format with 'qmicli -d /dev/cdc-wdm0
>>>
>>> --get-expected-data-format'.. .
>>>
>>> Expected
>>>
>>> link layer protocol retrieved: raw-ip
>>>
>>> Device
>>>
>>> and kernel link layer protocol match: raw-ip
>>>
>>> Starting network with 'qmicli -d
>>>
>>> /dev/cdc-wdm0
>>>
>>> --wds-start-network=apn='xxxx .vzwstatic'
>>>
>>> --client-no-release-cid '...
>>>
>>> error:
>>>
>>> couldn't start network: QMI protocol error (64):
>>>
>>> '(null)'
>>>
>>> Saving state at
>>>
>>> /tmp/qmi-network-state-cdc-wd m0... (CID: 35)
>>>
>>> error: network start failed, no packet data
>>>
>>> handle
>>>
>>> Clearing state at
>>>
>>> /tmp/qmi-network-state-cdc-wd m0...
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> and i tried your suggestion but got
>>>
>>> some issues
>>>
>>> [root at mc7455-1-qpcs-local ~]#
>>>
>>> qmicli -d /dev/cdc-wdm0
>>>
>>> --wds-set-autoconnect-setting s=disabled
>>>
>>> error: couldn't set autoconnect settings:
>>>
>>> QMI protocol error (3): 'Internal'
>>>
>>>
>>>
>>> have you got any advice
>>>
>>> ?
>>>
>>>
>>>
>>> 2017-01-16 17:00 GMT+01:00
>>>
>>> Aleksander Morgado <aleksander at aleksander.es>:
>>>
>>> On Mon,
>>>
>>> Jan 16, 2017 at 2:31 PM, heni wael <waelheni91 at gmail.com>
>>>
>>> wrote:
>>>
>>>
>>>
>>> > [root at mc7455-1-qpcs-local ~]# qmicli -d
>>>
>>> /dev/cdc-wdm0
>>>
>>>
>>>
>>> >
>>>
>>> --wds-get-autoconnect-setting s
>>>
>>>
>>>
>>> > Autoconnect settings retrieved:
>>>
>>>
>>>
>>> > Status: 'enabled'
>>>
>>>
>>>
>>> > Roaming: 'allowed'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Looks like autoconnect is already enabled in your
>>>
>>> modem, and therefore
>>>
>>>
>>>
>>> you shouldn't need "WDS start network"
>>> (i.e.
>>>
>>> what qmi-network does).
>>>
>>>
>>>
>>> If you're having issues with auto-connect you may
>>> want
>>>
>>> to disable it
>>>
>>>
>>>
>>> with --wds-set-autoconnect- settings=disabled and retry
>>>
>>> with
>>>
>>>
>>>
>>> qmi-network.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>>>
>>>
>>> Aleksander
>>>
>>>
>>>
>>> https://aleksander.es
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> -----Inline Attachment Follows-----
>>>
>>>
>>>
>>> _____________________________ __________________
>>>
>>> libqmi-devel mailing list
>>>
>>> libqmi-devel at lists.freedeskto
>>> p.org
>>>
>>> https://lists.freedesktop.org
>>> /mailman/listinfo/libqmi-devel
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> -----Inline Attachment Follows-----
>>>
>>> _______________________________________________
>>> libqmi-devel mailing list
>>> libqmi-devel at lists.freedesktop.org
>>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libqmi-devel/attachments/20170117/72ce0dce/attachment.html>
More information about the libqmi-devel
mailing list