MC7455 PROBLEM
heni wael
waelheni91 at gmail.com
Tue Jan 17 07:44:40 UTC 2017
About the patch
I use this version 16.2
https://www.freedesktop.org/software/libqmi/libqmi-1.16.2.tar.xz
is it patched or not
if not can you give me the link to the patch
Thanks again
2017-01-17 8:24 GMT+01:00 heni wael <waelheni91 at gmail.com>:
> After this 3 commands i got this
>
> [root at mc7455-1-qpcs-local ~]# qmicli -d /dev/cdc-wdm0
> --wds-get-current-settings
> error: couldn't get current settings: QMI protocol error (15): 'OutOfCall'
>
> 2017-01-17 8:21 GMT+01:00 heni wael <waelheni91 at gmail.com>:
>
>> Thanks for your help
>>
>> I show you the result of this commands :
>>
>>
>> 1- qmicli -d /dev/cdc-wdm0 --wda-get-data-format -v
>>
>> http://pastebin.com/jXqiFCmy
>>
>> 2-
>> [root at mc7455-1-qpcs-local ~]# qmicli -d /dev/cdc-wdm0
>> --set-expected-data-format=raw-ip -v
>> [17 ينا 2017, 02:14:28] [Debug] [/dev/cdc-wdm0] Opening device with flags
>> 'none'...
>> [17 ينا 2017, 02:14:28] [Debug] QMI Device at '/dev/cdc-wdm0' ready
>> [17 ينا 2017, 02:14:28] [Debug] Setting expected WWAN data format this
>> control port...
>> [17 ينا 2017, 02:14:28] [Debug] [/dev/cdc-wdm0] Writing expected data
>> format to: /sys/class/net/wwp0s20u4i8/qmi/raw_ip
>> [17 ينا 2017, 02:14:28] [Debug] [/dev/cdc-wdm0] Reading expected data
>> format from: /sys/class/net/wwp0s20u4i8/qmi/raw_ip
>> [/dev/cdc-wdm0] expected data format set to: raw-ip
>>
>>
>> 3- qmicli -d /dev/cdc-wdm0 --wds-start-network="apn=,wxxx.vzwstatic,ip-type=4"
>> --device-open-net="net-raw-ip|net-no-qos-header" --device-open-sync
>> --client-no-release-cid -v
>>
>> http://pastebin.com/NZwsBHmd
>>
>> Waiting your answer
>>
>> 2017-01-17 8:20 GMT+01:00 heni wael <waelheni91 at gmail.com>:
>>
>>> Thanks for your help
>>>
>>> I show you the result of this commands :
>>>
>>>
>>> 1- qmicli -d /dev/cdc-wdm0 --wda-get-data-format -v
>>>
>>> http://pastebin.com/jXqiFCmy
>>>
>>> 2-
>>> [root at mc7455-1-qpcs-local ~]# qmicli -d /dev/cdc-wdm0
>>> --set-expected-data-format=raw-ip -v
>>> [17 ينا 2017, 02:14:28] [Debug] [/dev/cdc-wdm0] Opening device with
>>> flags 'none'...
>>> [17 ينا 2017, 02:14:28] [Debug] QMI Device at '/dev/cdc-wdm0' ready
>>> [17 ينا 2017, 02:14:28] [Debug] Setting expected WWAN data format this
>>> control port...
>>> [17 ينا 2017, 02:14:28] [Debug] [/dev/cdc-wdm0] Writing expected data
>>> format to: /sys/class/net/wwp0s20u4i8/qmi/raw_ip
>>> [17 ينا 2017, 02:14:28] [Debug] [/dev/cdc-wdm0] Reading expected data
>>> format from: /sys/class/net/wwp0s20u4i8/qmi/raw_ip
>>> [/dev/cdc-wdm0] expected data format set to: raw-ip
>>>
>>>
>>> 3- qmicli -d /dev/cdc-wdm0 --wds-start-network="apn=,wxxx.vzwstatic,ip-type=4"
>>> --device-open-net="net-raw-ip|net-no-qos-header" --device-open-sync
>>> --client-no-release-cid
>>>
>>> http://pastebin.com/NZwsBHmd
>>>
>>> Waiting your answer
>>>
>>>
>>>
>>> 2017-01-16 22:32 GMT+01:00 Tang Nguyen <tang_nguyen at yahoo.com>:
>>>
>>>> AT+CGCCONTRDP replies the Bearer information which is IPv4 address. It
>>>> means your modem
>>>> has successfully registered to nework. Problem that you have now is
>>>> qmicli fails to setup a data channel bewteen host and modem. Nothing wrong
>>>> with your modem, SIM and VZ network.
>>>>
>>>> Try below commands to see any help. (you migh want to add -v (verbose)
>>>> option to get more debug information from libqmi commands)
>>>>
>>>> qmicli -d /dev/cdc-wdm0 --wda-get-data-format
>>>> qmicli -d /dev/cdc-wdm0 --set-expected-data-format=raw-ip
>>>> qmicli -d /dev/cdc-wdm0 --wds-start-network="apn=,wxxx.vzwstatic,ip-type=4"
>>>> --device-open-net="net-raw-ip|net-no-qos-header" --device-open-sync
>>>> --client-no-release-cid
>>>>
>>>>
>>>> Above commands try to set raw-ip data link , and force connection with
>>>> IPV4. APN from qmicli command must be matched with the one you get from
>>>> at+cgdcont?, if not connectiion would fail.
>>>>
>>>> If you got packet-data handle, command "qmicli -d /dev/cdc-wdm0
>>>> --wds-get-current-settings" shows you the connectivity status.
>>>>
>>>>
>>>>
>>>> --tang
>>>>
>>>>
>>>> --------------------------------------------
>>>> On Mon, 1/16/17, heni wael <waelheni91 at gmail.com> wrote:
>>>>
>>>> Subject: Re: MC7455 PROBLEM
>>>> To: libqmi-devel at lists.freedesktop.org
>>>> Date: Monday, January 16, 2017, 3:35 PM
>>>>
>>>> Other thing
>>>>
>>>>
>>>> i have this
>>>> qmicli -d /dev/cdc-wdm0
>>>> --wds-get-current-settings
>>>> error:
>>>> couldn't get current settings: QMI protocol error (15):
>>>> 'OutOfCall'
>>>>
>>>>
>>>> but when i use this AT command
>>>> "AT+CGCONTRDP" i got this result
>>>> +CGCONTRDP:
>>>> 1,5,wxxx.vzwstatic,166.164.108.xxx,,198.224.173.xxx,198.224.174.xxx
>>>>
>>>>
>>>> 2017-01-16 21:14 GMT+01:00
>>>> heni wael <waelheni91 at gmail.com>:
>>>> Thanks Tang ,
>>>>
>>>> i got this
>>>> at+cgdcont?
>>>>
>>>> +CGDCONT:
>>>> 1,"IP","xx01.vzwstatic","0.0.0
>>>> .0",0,0,0,0
>>>> 2017-01-16 21:14 GMT+01:00
>>>> heni wael <waelheni91 at gmail.com>:
>>>> Thanks Tang
>>>> ,
>>>>
>>>> i got this
>>>> at+cgdcont?
>>>>
>>>> +CGDCONT:
>>>> 1,"IP","xx01.vzwstatic","0.0.0
>>>> .0",0,0,0,0
>>>>
>>>>
>>>> 2017-01-16 18:17 GMT+01:00
>>>> Tang Nguyen <tang_nguyen at yahoo.com>:
>>>> Hi Heni,
>>>>
>>>>
>>>>
>>>> Can you make sure you have below patch from Dan in your 16.2
>>>> build.
>>>>
>>>>
>>>>
>>>> commit 4c678418f398fc5f9dcdb216c0ffdf fc8524bea2
>>>>
>>>>
>>>>
>>>> qmicli: fix handling of unspecified ip_type in
>>>> --wds-start-network
>>>>
>>>> QMI_WDS_IP_FAMILY_UNSPECIFIED = 8 but ip_type gets
>>>> initialized to 0, so the "IP Family Preference"
>>>> was always being sent with an unrecognized value. Fixes:
>>>> 81c21379 qmicli: add support for IP type to
>>>> --wds-start-network
>>>>
>>>>
>>>>
>>>> --tang
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------ --------------
>>>>
>>>> On Mon, 1/16/17, heni wael <waelheni91 at gmail.com>
>>>> wrote:
>>>>
>>>>
>>>>
>>>> Subject: Re: MC7455 PROBLEM
>>>>
>>>> To: libqmi-devel at lists.freedesktop
>>>> .org
>>>>
>>>> Date: Monday, January 16, 2017, 11:25 AM
>>>>
>>>>
>>>>
>>>> I installed qmicli last version 16.2
>>>>
>>>> and i got this now
>>>>
>>>> [root at mc7455-1-qpcs-local ~]# qmi-network
>>>>
>>>> /dev/cdc-wdm0 start
>>>>
>>>> Loading profile at
>>>>
>>>> /etc/qmi-network.conf...
>>>>
>>>> APN:
>>>>
>>>> xxxx.vzwstatic
>>>>
>>>> APN user: unset
>>>>
>>>> APN password: unset
>>>>
>>>> qmi-proxy: no
>>>>
>>>> Checking
>>>>
>>>> data format with 'qmicli -d /dev/cdc-wdm0
>>>>
>>>> --wda-get-data-format '...
>>>>
>>>> Device link
>>>>
>>>> layer protocol retrieved: raw-ip
>>>>
>>>> Getting
>>>>
>>>> expected data format with 'qmicli -d /dev/cdc-wdm0
>>>>
>>>> --get-expected-data-format'.. .
>>>>
>>>> Expected
>>>>
>>>> link layer protocol retrieved: raw-ip
>>>>
>>>> Device
>>>>
>>>> and kernel link layer protocol match: raw-ip
>>>>
>>>> Starting network with 'qmicli -d
>>>>
>>>> /dev/cdc-wdm0
>>>>
>>>> --wds-start-network=apn='xxxx .vzwstatic'
>>>>
>>>> --client-no-release-cid '...
>>>>
>>>> error:
>>>>
>>>> couldn't start network: QMI protocol error (64):
>>>>
>>>> '(null)'
>>>>
>>>> Saving state at
>>>>
>>>> /tmp/qmi-network-state-cdc-wd m0... (CID: 35)
>>>>
>>>> error: network start failed, no packet data
>>>>
>>>> handle
>>>>
>>>> Clearing state at
>>>>
>>>> /tmp/qmi-network-state-cdc-wd m0...
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> and i tried your suggestion but got
>>>>
>>>> some issues
>>>>
>>>> [root at mc7455-1-qpcs-local ~]#
>>>>
>>>> qmicli -d /dev/cdc-wdm0
>>>>
>>>> --wds-set-autoconnect-setting s=disabled
>>>>
>>>> error: couldn't set autoconnect settings:
>>>>
>>>> QMI protocol error (3): 'Internal'
>>>>
>>>>
>>>>
>>>> have you got any advice
>>>>
>>>> ?
>>>>
>>>>
>>>>
>>>> 2017-01-16 17:00 GMT+01:00
>>>>
>>>> Aleksander Morgado <aleksander at aleksander.es>:
>>>>
>>>> On Mon,
>>>>
>>>> Jan 16, 2017 at 2:31 PM, heni wael <waelheni91 at gmail.com>
>>>>
>>>> wrote:
>>>>
>>>>
>>>>
>>>> > [root at mc7455-1-qpcs-local ~]# qmicli -d
>>>>
>>>> /dev/cdc-wdm0
>>>>
>>>>
>>>>
>>>> >
>>>>
>>>> --wds-get-autoconnect-setting s
>>>>
>>>>
>>>>
>>>> > Autoconnect settings retrieved:
>>>>
>>>>
>>>>
>>>> > Status: 'enabled'
>>>>
>>>>
>>>>
>>>> > Roaming: 'allowed'
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Looks like autoconnect is already enabled in your
>>>>
>>>> modem, and therefore
>>>>
>>>>
>>>>
>>>> you shouldn't need "WDS start network"
>>>> (i.e.
>>>>
>>>> what qmi-network does).
>>>>
>>>>
>>>>
>>>> If you're having issues with auto-connect you may
>>>> want
>>>>
>>>> to disable it
>>>>
>>>>
>>>>
>>>> with --wds-set-autoconnect- settings=disabled and retry
>>>>
>>>> with
>>>>
>>>>
>>>>
>>>> qmi-network.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>>
>>>>
>>>>
>>>> Aleksander
>>>>
>>>>
>>>>
>>>> https://aleksander.es
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> -----Inline Attachment Follows-----
>>>>
>>>>
>>>>
>>>> _____________________________ __________________
>>>>
>>>> libqmi-devel mailing list
>>>>
>>>> libqmi-devel at lists.freedeskto
>>>> p.org
>>>>
>>>> https://lists.freedesktop.org
>>>> /mailman/listinfo/libqmi-devel
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> -----Inline Attachment Follows-----
>>>>
>>>> _______________________________________________
>>>> libqmi-devel mailing list
>>>> libqmi-devel at lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libqmi-devel/attachments/20170117/75cdb972/attachment-0001.html>
More information about the libqmi-devel
mailing list