MC7354 with Verizon network
heni wael
waelheni91 at gmail.com
Mon Jan 23 08:25:26 UTC 2017
I updated the firmware
i have now this
!GOBIIMPREF:
preferred fw version: 05.05.58.01
preferred carrier name: VZW
preferred config name: VZW_005.029_000
current fw version: 05.05.58.01
current carrier name: VZW
current config name: VZW_005.029_000
OK
and this
AT+CGDCONT?
+CGDCONT: 1,"IPV4V6","vzwims","0.0.0.0",0,0
+CGDCONT: 3,"IP","we01.vzwstatic","0.0.0.0",0,0
OK
but some AT command are not working
i have this
at+cgatt?
ERROR
Another thing
I find many PDP context may be 10 context i deleted them all and changed
them by this two context
Is this related to the firmware (Is there a mistake in the update )
or
related to my configuration
Thanks
2017-01-23 9:25 GMT+01:00 heni wael <waelheni91 at gmail.com>:
> I updated the firmware
> i have now this
>
> !GOBIIMPREF:
> preferred fw version: 05.05.58.01
> preferred carrier name: VZW
> preferred config name: VZW_005.029_000
> current fw version: 05.05.58.01
> current carrier name: VZW
> current config name: VZW_005.029_000
>
> OK
> and this
> AT+CGDCONT?
>
> +CGDCONT: 1,"IPV4V6","vzwims","0.0.0.0",0,0
> +CGDCONT: 3,"IP","we01.vzwstatic","0.0.0.0",0,0
>
> OK
>
>
> but some AT command are not working
>
> i have this
>
> at+cgatt?
>
> ERROR
>
> Another thing
> I find many PDP context may be 10 context i deleted them all and changed
> them by this two context
>
> Is this related to the firmware (Is there a mistake in the update )
> or
> related to my configuration
>
> Thanks
>
>
>
>
> 2017-01-22 20:24 GMT+01:00 Ramesh Siripurapu <
> ramesh.siripurapu at aptiwiz.com>:
>
>> at+gobiimpref?
>>
>> Check firmware image first.
>>
>> ---- On Sun, 22 Jan 2017 00:35:36 -0800 *heni wael <waelheni91 at gmail.com
>> <waelheni91 at gmail.com>>* wrote ----
>>
>> Thanks for all your response
>> I have this
>>
>> at!band?
>>
>> Index, Name, GW Band Mask L Band Mask
>> 00, All Bands, 0002000004E80380 000000000001001A
>>
>>
>> OK
>>
>> at!band=?
>>
>> Index, Name, GW Band Mask L Band Mask
>> 00, All Bands, 0002000004E80380 000000000001001A
>> 01, Europe 3G, 0002000000400000 0000000000000000
>> 02, North America 3G, 0000000004800000 0000000000000000
>> 03, Europe 2G, 0000000000000380 0000000000000000
>> 04, North America 2G, 0000000000280000 0000000000000000
>> 05, GSM ALL, 0000000000280380 0000000000000000
>> 06, Europe, 0002000000400380 0000000000000000
>> 07, North America, 0000000004A80000 000000000001001A
>> 08, WCDMA ALL, 0002000004C00000 0000000000000000
>> 09, LTE ALL, 0000000000000000 000000000001001A
>>
>> 0000000000010000 -
>> B17
>> 0000000000000010 -
>> B5
>> 0000000000000008 -
>> B4
>> 0000000000000002 -
>> B2
>> 0002000000000000 - B8 (900)
>> 0000000004000000 - B5 (850)
>> 0000000000800000 - B2 (1900)
>> 0000000000400000 - B1 (2100)
>> 0000000000200000 - G1900
>> 0000000000080000 - G850
>> 0000000000000200 - G900P
>> 0000000000000100 - G900E
>> 0000000000000080 - G1800
>>
>> OK
>> It is set to all band
>> What you suggest ?
>> I change the firmware ?
>> I have another device but it is MC7455 , it register without problem but
>> when i do the at!gstatus? i got "LTE band: B4 "
>> Thanks
>>
>> 2017-01-22 9:34 GMT+01:00 heni wael <waelheni91 at gmail.com>:
>>
>>
>> _______________________________________________
>> libqmi-devel mailing list
>> libqmi-devel at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>
>> Thanks for all your response
>> I have this
>>
>> at!band?
>>
>> Index, Name, GW Band Mask L Band Mask
>> 00, All Bands, 0002000004E80380 000000000001001A
>>
>>
>> OK
>>
>> at!band=?
>>
>> Index, Name, GW Band Mask L Band Mask
>> 00, All Bands, 0002000004E80380 000000000001001A
>> 01, Europe 3G, 0002000000400000 0000000000000000
>> 02, North America 3G, 0000000004800000 0000000000000000
>> 03, Europe 2G, 0000000000000380 0000000000000000
>> 04, North America 2G, 0000000000280000 0000000000000000
>> 05, GSM ALL, 0000000000280380 0000000000000000
>> 06, Europe, 0002000000400380 0000000000000000
>> 07, North America, 0000000004A80000 000000000001001A
>> 08, WCDMA ALL, 0002000004C00000 0000000000000000
>> 09, LTE ALL, 0000000000000000 000000000001001A
>>
>> 0000000000010000 -
>> B17
>> 0000000000000010 -
>> B5
>> 0000000000000008 -
>> B4
>> 0000000000000002 -
>> B2
>> 0002000000000000 - B8 (900)
>> 0000000004000000 - B5 (850)
>> 0000000000800000 - B2 (1900)
>> 0000000000400000 - B1 (2100)
>> 0000000000200000 - G1900
>> 0000000000080000 - G850
>> 0000000000000200 - G900P
>> 0000000000000100 - G900E
>> 0000000000000080 - G1800
>>
>> OK
>> It is set to all band
>> What you suggest ?
>> I change the firmware ?
>> I have another device but it is MC7455 , it register without problem but
>> when i do the at!gstatus? i got "LTE band: B4 "
>> Thanks
>>
>>
>> 2017-01-22 0:28 GMT+01:00 Ramesh Siripurapu <
>> ramesh.siripurapu at aptiwiz.com>:
>>
>>
>> MC7354 works with all US carriers. You just have to flash appropriate
>> firmware from Sierra website.
>>
>> ---- On Sat, 21 Jan 2017 14:05:19 -0800 *Tang Nguyen
>> <tang_nguyen at yahoo.com <tang_nguyen at yahoo.com>>* wrote ----
>>
>> Are you sure MC7354 loaded with Verizon firmware ? AFAIK, MC7354 is
>> loaded with ATT by default, so it doesn't support the LTE Verizon band.
>> MC7350 is a modem for Verizon. Try connect to Verizon network if you have
>> MC7350 modem.
>>
>> Tang
>>
>> Sent from my iPhone
>>
>> On Jan 21, 2017, at 4:37 PM, heni wael <waelheni91 at gmail.com> wrote:
>>
>> Thanks for your reply
>> look like not connected to the network
>> may be because band is 2 and verizon work with 4 and 13
>>
>> look at this
>> at+cgatt?
>>
>> +CGATT: 0
>>
>> OK
>>
>> at+cgatt=1
>> not working
>>
>> and i have this
>>
>>
>> at!gstatus?
>>
>> !GSTATUS:
>> Current Time: 5926 Temperature: 28
>> Bootup Time: 6 Mode: ONLINE
>> System mode: LTE PS state: Not attached
>> LTE band: B2 LTE bw: 5 MHz
>> LTE Rx chan: 975 LTE Tx chan: 65535
>> EMM state: Deregistered Limited Service
>> RRC state: RRC Idle
>> IMS reg state: No Srv
>>
>> RSSI (dBm): 0 Tx Power: 0
>> RSRP (dBm): 0 TAC: 0000 (0)
>> RSRQ (dB): 0 Cell ID: FFFFFFFF (4294967295)
>> SINR (dB): -20.0
>>
>>
>> Have you got an idea ?
>> Thanks
>>
>> 2017-01-21 22:36 GMT+01:00 heni wael <waelheni91 at gmail.com>:
>>
>> Thanks for your reply
>> look like not connected to the network
>> may be because band is 2 and verizon work with 4 and 13
>>
>> look at this
>> at+cgatt?
>>
>> +CGATT: 0
>>
>> OK
>>
>> at+cgatt=1
>> not working
>>
>> and i have this
>>
>>
>> at!gstatus?
>>
>> !GSTATUS:
>> Current Time: 5926 Temperature: 28
>> Bootup Time: 6 Mode: ONLINE
>> System mode: LTE PS state: Not attached
>> LTE band: B2 LTE bw: 5 MHz
>> LTE Rx chan: 975 LTE Tx chan: 65535
>> EMM state: Deregistered Limited Service
>> RRC state: RRC Idle
>> IMS reg state: No Srv
>>
>> RSSI (dBm): 0 Tx Power: 0
>> RSRP (dBm): 0 TAC: 0000 (0)
>> RSRQ (dB): 0 Cell ID: FFFFFFFF (4294967295)
>> SINR (dB): -20.0
>>
>>
>> Have you an idea
>>
>>
>> 2017-01-21 19:07 GMT+01:00 Sebastian Sjoholm <sebastian.sjoholm at gmail.com
>> >:
>>
>>
>> > [root at localhost ~]# qmi-network /dev/cdc-wdm0 start
>> > Loading profile at /etc/qmi-network.conf...
>> > APN: wexx.vzwstatic
>> > APN user: unset
>> > APN password: unset
>> > qmi-proxy: no
>> > Checking data format with 'qmicli -d /dev/cdc-wdm0
>> --wda-get-data-format '...
>> > Device link layer protocol retrieved: 802-3
>> > Getting expected data format with 'qmicli -d /dev/cdc-wdm0
>> --get-expected-data-format'...
>> > Expected link layer protocol retrieved: 802-3
>> > Device and kernel link layer protocol match: 802-3
>> > Starting network with 'qmicli -d /dev/cdc-wdm0
>> --wds-start-network=apn='wexx.vzwstatic' --client-no-release-cid '...
>> > error: couldn't start network: QMI protocol error (64): '(null)'
>> > Saving state at /tmp/qmi-network-state-cdc-wdm0... (CID: 9)
>> > error: network start failed, no packet data handle
>> > Clearing state at /tmp/qmi-network-state-cdc-wdm0...
>> >
>> > i can t connect
>> > can any one tell me what is wrong
>> >
>>
>> I guess first thing would be to verify that the network connection is OK,
>>
>> PS state should be 1
>>
>> at+cgatt?
>>
>> Then you can see if you can get the PDP attached
>>
>> at+cgact=1,3
>> at+cgact?
>>
>> and IP address
>>
>> at+cgpaddr=3
>>
>> and network status
>>
>> at!gstatus?
>>
>> -Sebastian
>>
>>
>>
>> _______________________________________________
>> libqmi-devel mailing list
>> libqmi-devel at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>
>> _______________________________________________
>> libqmi-devel mailing list
>> libqmi-devel at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libqmi-devel/attachments/20170123/0c94496f/attachment-0001.html>
More information about the libqmi-devel
mailing list