MC7354 with Verizon network
heni wael
waelheni91 at gmail.com
Mon Jan 23 08:57:22 UTC 2017
I have This
AT!PRIID?
PRI Part Number: 9904626
Revision: 05.00
Carrier PRI: 9999999_9902196_SWI9X15C_05.05.58.00_00_ATT_005.026_000
Carrier PRI: 9999999_9902266_SWI9X15C_05.05.58.01_00_VZW_005.029_000
OK
I seleted to first firlmware
!GOBIIMPREF:
preferred fw version: 05.05.58.00
preferred carrier name: ATT
preferred config name: ATT_005.026_000
current fw version: 05.05.58.01
current carrier name: VZW
current config name: VZW_005.029_000
fw version mismatch
carrier name mismatch
config name mismatch
OK
Now the command at+cgatt? works
+CGATT: 0
OK
But the device not connected
Have you got a suggestion
Thanks for all
2017-01-23 9:25 GMT+01:00 heni wael <waelheni91 at gmail.com>:
> I updated the firmware
> i have now this
>
> !GOBIIMPREF:
> preferred fw version: 05.05.58.01
> preferred carrier name: VZW
> preferred config name: VZW_005.029_000
> current fw version: 05.05.58.01
> current carrier name: VZW
> current config name: VZW_005.029_000
>
> OK
> and this
> AT+CGDCONT?
>
> +CGDCONT: 1,"IPV4V6","vzwims","0.0.0.0",0,0
> +CGDCONT: 3,"IP","we01.vzwstatic","0.0.0.0",0,0
>
> OK
>
>
> but some AT command are not working
>
> i have this
>
> at+cgatt?
>
> ERROR
>
> Another thing
> I find many PDP context may be 10 context i deleted them all and changed
> them by this two context
>
> Is this related to the firmware (Is there a mistake in the update )
> or
> related to my configuration
>
> Thanks
>
> 2017-01-23 9:25 GMT+01:00 heni wael <waelheni91 at gmail.com>:
>
>> I updated the firmware
>> i have now this
>>
>> !GOBIIMPREF:
>> preferred fw version: 05.05.58.01
>> preferred carrier name: VZW
>> preferred config name: VZW_005.029_000
>> current fw version: 05.05.58.01
>> current carrier name: VZW
>> current config name: VZW_005.029_000
>>
>> OK
>> and this
>> AT+CGDCONT?
>>
>> +CGDCONT: 1,"IPV4V6","vzwims","0.0.0.0",0,0
>> +CGDCONT: 3,"IP","we01.vzwstatic","0.0.0.0",0,0
>>
>> OK
>>
>>
>> but some AT command are not working
>>
>> i have this
>>
>> at+cgatt?
>>
>> ERROR
>>
>> Another thing
>> I find many PDP context may be 10 context i deleted them all and changed
>> them by this two context
>>
>> Is this related to the firmware (Is there a mistake in the update )
>> or
>> related to my configuration
>>
>> Thanks
>>
>>
>>
>>
>> 2017-01-22 20:24 GMT+01:00 Ramesh Siripurapu <
>> ramesh.siripurapu at aptiwiz.com>:
>>
>>> at+gobiimpref?
>>>
>>> Check firmware image first.
>>>
>>> ---- On Sun, 22 Jan 2017 00:35:36 -0800 *heni wael
>>> <waelheni91 at gmail.com <waelheni91 at gmail.com>>* wrote ----
>>>
>>> Thanks for all your response
>>> I have this
>>>
>>> at!band?
>>>
>>> Index, Name, GW Band Mask L Band Mask
>>> 00, All Bands, 0002000004E80380 000000000001001A
>>>
>>>
>>> OK
>>>
>>> at!band=?
>>>
>>> Index, Name, GW Band Mask L Band Mask
>>> 00, All Bands, 0002000004E80380 000000000001001A
>>> 01, Europe 3G, 0002000000400000 0000000000000000
>>> 02, North America 3G, 0000000004800000 0000000000000000
>>> 03, Europe 2G, 0000000000000380 0000000000000000
>>> 04, North America 2G, 0000000000280000 0000000000000000
>>> 05, GSM ALL, 0000000000280380 0000000000000000
>>> 06, Europe, 0002000000400380 0000000000000000
>>> 07, North America, 0000000004A80000 000000000001001A
>>> 08, WCDMA ALL, 0002000004C00000 0000000000000000
>>> 09, LTE ALL, 0000000000000000 000000000001001A
>>>
>>> 0000000000010000 -
>>> B17
>>> 0000000000000010 -
>>> B5
>>> 0000000000000008 -
>>> B4
>>> 0000000000000002 -
>>> B2
>>> 0002000000000000 - B8 (900)
>>> 0000000004000000 - B5 (850)
>>> 0000000000800000 - B2 (1900)
>>> 0000000000400000 - B1 (2100)
>>> 0000000000200000 - G1900
>>> 0000000000080000 - G850
>>> 0000000000000200 - G900P
>>> 0000000000000100 - G900E
>>> 0000000000000080 - G1800
>>>
>>> OK
>>> It is set to all band
>>> What you suggest ?
>>> I change the firmware ?
>>> I have another device but it is MC7455 , it register without problem but
>>> when i do the at!gstatus? i got "LTE band: B4 "
>>> Thanks
>>>
>>> 2017-01-22 9:34 GMT+01:00 heni wael <waelheni91 at gmail.com>:
>>>
>>>
>>> _______________________________________________
>>> libqmi-devel mailing list
>>> libqmi-devel at lists.freedesktop.org
>>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>>
>>> Thanks for all your response
>>> I have this
>>>
>>> at!band?
>>>
>>> Index, Name, GW Band Mask L Band Mask
>>> 00, All Bands, 0002000004E80380 000000000001001A
>>>
>>>
>>> OK
>>>
>>> at!band=?
>>>
>>> Index, Name, GW Band Mask L Band Mask
>>> 00, All Bands, 0002000004E80380 000000000001001A
>>> 01, Europe 3G, 0002000000400000 0000000000000000
>>> 02, North America 3G, 0000000004800000 0000000000000000
>>> 03, Europe 2G, 0000000000000380 0000000000000000
>>> 04, North America 2G, 0000000000280000 0000000000000000
>>> 05, GSM ALL, 0000000000280380 0000000000000000
>>> 06, Europe, 0002000000400380 0000000000000000
>>> 07, North America, 0000000004A80000 000000000001001A
>>> 08, WCDMA ALL, 0002000004C00000 0000000000000000
>>> 09, LTE ALL, 0000000000000000 000000000001001A
>>>
>>> 0000000000010000 -
>>> B17
>>> 0000000000000010 -
>>> B5
>>> 0000000000000008 -
>>> B4
>>> 0000000000000002 -
>>> B2
>>> 0002000000000000 - B8 (900)
>>> 0000000004000000 - B5 (850)
>>> 0000000000800000 - B2 (1900)
>>> 0000000000400000 - B1 (2100)
>>> 0000000000200000 - G1900
>>> 0000000000080000 - G850
>>> 0000000000000200 - G900P
>>> 0000000000000100 - G900E
>>> 0000000000000080 - G1800
>>>
>>> OK
>>> It is set to all band
>>> What you suggest ?
>>> I change the firmware ?
>>> I have another device but it is MC7455 , it register without problem but
>>> when i do the at!gstatus? i got "LTE band: B4 "
>>> Thanks
>>>
>>>
>>> 2017-01-22 0:28 GMT+01:00 Ramesh Siripurapu <
>>> ramesh.siripurapu at aptiwiz.com>:
>>>
>>>
>>> MC7354 works with all US carriers. You just have to flash appropriate
>>> firmware from Sierra website.
>>>
>>> ---- On Sat, 21 Jan 2017 14:05:19 -0800 *Tang Nguyen
>>> <tang_nguyen at yahoo.com <tang_nguyen at yahoo.com>>* wrote ----
>>>
>>> Are you sure MC7354 loaded with Verizon firmware ? AFAIK, MC7354 is
>>> loaded with ATT by default, so it doesn't support the LTE Verizon band.
>>> MC7350 is a modem for Verizon. Try connect to Verizon network if you have
>>> MC7350 modem.
>>>
>>> Tang
>>>
>>> Sent from my iPhone
>>>
>>> On Jan 21, 2017, at 4:37 PM, heni wael <waelheni91 at gmail.com> wrote:
>>>
>>> Thanks for your reply
>>> look like not connected to the network
>>> may be because band is 2 and verizon work with 4 and 13
>>>
>>> look at this
>>> at+cgatt?
>>>
>>> +CGATT: 0
>>>
>>> OK
>>>
>>> at+cgatt=1
>>> not working
>>>
>>> and i have this
>>>
>>>
>>> at!gstatus?
>>>
>>> !GSTATUS:
>>> Current Time: 5926 Temperature: 28
>>> Bootup Time: 6 Mode: ONLINE
>>> System mode: LTE PS state: Not attached
>>> LTE band: B2 LTE bw: 5 MHz
>>> LTE Rx chan: 975 LTE Tx chan: 65535
>>> EMM state: Deregistered Limited Service
>>> RRC state: RRC Idle
>>> IMS reg state: No Srv
>>>
>>> RSSI (dBm): 0 Tx Power: 0
>>> RSRP (dBm): 0 TAC: 0000 (0)
>>> RSRQ (dB): 0 Cell ID: FFFFFFFF (4294967295)
>>> SINR (dB): -20.0
>>>
>>>
>>> Have you got an idea ?
>>> Thanks
>>>
>>> 2017-01-21 22:36 GMT+01:00 heni wael <waelheni91 at gmail.com>:
>>>
>>> Thanks for your reply
>>> look like not connected to the network
>>> may be because band is 2 and verizon work with 4 and 13
>>>
>>> look at this
>>> at+cgatt?
>>>
>>> +CGATT: 0
>>>
>>> OK
>>>
>>> at+cgatt=1
>>> not working
>>>
>>> and i have this
>>>
>>>
>>> at!gstatus?
>>>
>>> !GSTATUS:
>>> Current Time: 5926 Temperature: 28
>>> Bootup Time: 6 Mode: ONLINE
>>> System mode: LTE PS state: Not attached
>>> LTE band: B2 LTE bw: 5 MHz
>>> LTE Rx chan: 975 LTE Tx chan: 65535
>>> EMM state: Deregistered Limited Service
>>> RRC state: RRC Idle
>>> IMS reg state: No Srv
>>>
>>> RSSI (dBm): 0 Tx Power: 0
>>> RSRP (dBm): 0 TAC: 0000 (0)
>>> RSRQ (dB): 0 Cell ID: FFFFFFFF (4294967295)
>>> SINR (dB): -20.0
>>>
>>>
>>> Have you an idea
>>>
>>>
>>> 2017-01-21 19:07 GMT+01:00 Sebastian Sjoholm <
>>> sebastian.sjoholm at gmail.com>:
>>>
>>>
>>> > [root at localhost ~]# qmi-network /dev/cdc-wdm0 start
>>> > Loading profile at /etc/qmi-network.conf...
>>> > APN: wexx.vzwstatic
>>> > APN user: unset
>>> > APN password: unset
>>> > qmi-proxy: no
>>> > Checking data format with 'qmicli -d /dev/cdc-wdm0
>>> --wda-get-data-format '...
>>> > Device link layer protocol retrieved: 802-3
>>> > Getting expected data format with 'qmicli -d /dev/cdc-wdm0
>>> --get-expected-data-format'...
>>> > Expected link layer protocol retrieved: 802-3
>>> > Device and kernel link layer protocol match: 802-3
>>> > Starting network with 'qmicli -d /dev/cdc-wdm0
>>> --wds-start-network=apn='wexx.vzwstatic' --client-no-release-cid '...
>>> > error: couldn't start network: QMI protocol error (64): '(null)'
>>> > Saving state at /tmp/qmi-network-state-cdc-wdm0... (CID: 9)
>>> > error: network start failed, no packet data handle
>>> > Clearing state at /tmp/qmi-network-state-cdc-wdm0...
>>> >
>>> > i can t connect
>>> > can any one tell me what is wrong
>>> >
>>>
>>> I guess first thing would be to verify that the network connection is OK,
>>>
>>> PS state should be 1
>>>
>>> at+cgatt?
>>>
>>> Then you can see if you can get the PDP attached
>>>
>>> at+cgact=1,3
>>> at+cgact?
>>>
>>> and IP address
>>>
>>> at+cgpaddr=3
>>>
>>> and network status
>>>
>>> at!gstatus?
>>>
>>> -Sebastian
>>>
>>>
>>>
>>> _______________________________________________
>>> libqmi-devel mailing list
>>> libqmi-devel at lists.freedesktop.org
>>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>>
>>> _______________________________________________
>>> libqmi-devel mailing list
>>> libqmi-devel at lists.freedesktop.org
>>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>>
>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libqmi-devel/attachments/20170123/a046f042/attachment-0001.html>
More information about the libqmi-devel
mailing list