MC7354 with Verizon network
heni wael
waelheni91 at gmail.com
Mon Jan 23 09:49:42 UTC 2017
I have this now
AT+CGDCONT?
OK
+CGDCONT: 1,"IPV4V6","vzwims","0.0.0.0",0,0
+CGDCONT: 3,"IP","we01.vzwstatic","0.0.0.0",0,0
OK
AT!GOBIIMPREF?
!GOBIIMPREF:
preferred fw version: 02.05.07.00
preferred carrier name: VERIZON
preferred config name: VERIZON_002.008_003
current fw version: 05.05.58.01
current carrier name: VZW
current config name: VZW_005.029_000
fw version mismatch
carrier name mismatch
config name mismatch
OK
!GSTATUS:
Current Time: 674 Temperature: 28
Bootup Time: 5 Mode: LOW POWER MODE
System mode: TD-SCDMA PS state: Not attached
OK
+CGATT: 0
OK
AT+CGATT=1,3
ERROR
AT!BAND?
Index, Name, GW Band Mask L Band Mask
00, All Bands, 0002000004E80187 0000000000001008
firmware is ok
but may be there is a problem in PDP context
as i said that at first there is many context i deleted them
can any one help
thanks
2017-01-23 9:57 GMT+01:00 heni wael <waelheni91 at gmail.com>:
> I have This
>
>
> AT!PRIID?
>
>
> PRI Part Number: 9904626
> Revision: 05.00
>
> Carrier PRI: 9999999_9902196_SWI9X15C_05.05.58.00_00_ATT_005.026_000
> Carrier PRI: 9999999_9902266_SWI9X15C_05.05.58.01_00_VZW_005.029_000
>
> OK
>
>
> I seleted to first firlmware
> !GOBIIMPREF:
> preferred fw version: 05.05.58.00
> preferred carrier name: ATT
> preferred config name: ATT_005.026_000
> current fw version: 05.05.58.01
> current carrier name: VZW
> current config name: VZW_005.029_000
>
> fw version mismatch
> carrier name mismatch
> config name mismatch
>
> OK
>
>
> Now the command at+cgatt? works
>
> +CGATT: 0
>
> OK
>
> But the device not connected
>
> Have you got a suggestion
>
> Thanks for all
>
>
> 2017-01-23 9:25 GMT+01:00 heni wael <waelheni91 at gmail.com>:
>
>> I updated the firmware
>> i have now this
>>
>> !GOBIIMPREF:
>> preferred fw version: 05.05.58.01
>> preferred carrier name: VZW
>> preferred config name: VZW_005.029_000
>> current fw version: 05.05.58.01
>> current carrier name: VZW
>> current config name: VZW_005.029_000
>>
>> OK
>> and this
>> AT+CGDCONT?
>>
>> +CGDCONT: 1,"IPV4V6","vzwims","0.0.0.0",0,0
>> +CGDCONT: 3,"IP","we01.vzwstatic","0.0.0.0",0,0
>>
>> OK
>>
>>
>> but some AT command are not working
>>
>> i have this
>>
>> at+cgatt?
>>
>> ERROR
>>
>> Another thing
>> I find many PDP context may be 10 context i deleted them all and changed
>> them by this two context
>>
>> Is this related to the firmware (Is there a mistake in the update )
>> or
>> related to my configuration
>>
>> Thanks
>>
>> 2017-01-23 9:25 GMT+01:00 heni wael <waelheni91 at gmail.com>:
>>
>>> I updated the firmware
>>> i have now this
>>>
>>> !GOBIIMPREF:
>>> preferred fw version: 05.05.58.01
>>> preferred carrier name: VZW
>>> preferred config name: VZW_005.029_000
>>> current fw version: 05.05.58.01
>>> current carrier name: VZW
>>> current config name: VZW_005.029_000
>>>
>>> OK
>>> and this
>>> AT+CGDCONT?
>>>
>>> +CGDCONT: 1,"IPV4V6","vzwims","0.0.0.0",0,0
>>> +CGDCONT: 3,"IP","we01.vzwstatic","0.0.0.0",0,0
>>>
>>> OK
>>>
>>>
>>> but some AT command are not working
>>>
>>> i have this
>>>
>>> at+cgatt?
>>>
>>> ERROR
>>>
>>> Another thing
>>> I find many PDP context may be 10 context i deleted them all and changed
>>> them by this two context
>>>
>>> Is this related to the firmware (Is there a mistake in the update )
>>> or
>>> related to my configuration
>>>
>>> Thanks
>>>
>>>
>>>
>>>
>>> 2017-01-22 20:24 GMT+01:00 Ramesh Siripurapu <
>>> ramesh.siripurapu at aptiwiz.com>:
>>>
>>>> at+gobiimpref?
>>>>
>>>> Check firmware image first.
>>>>
>>>> ---- On Sun, 22 Jan 2017 00:35:36 -0800 *heni wael
>>>> <waelheni91 at gmail.com <waelheni91 at gmail.com>>* wrote ----
>>>>
>>>> Thanks for all your response
>>>> I have this
>>>>
>>>> at!band?
>>>>
>>>> Index, Name, GW Band Mask L Band Mask
>>>> 00, All Bands, 0002000004E80380 000000000001001A
>>>>
>>>>
>>>> OK
>>>>
>>>> at!band=?
>>>>
>>>> Index, Name, GW Band Mask L Band Mask
>>>> 00, All Bands, 0002000004E80380 000000000001001A
>>>> 01, Europe 3G, 0002000000400000 0000000000000000
>>>> 02, North America 3G, 0000000004800000 0000000000000000
>>>> 03, Europe 2G, 0000000000000380 0000000000000000
>>>> 04, North America 2G, 0000000000280000 0000000000000000
>>>> 05, GSM ALL, 0000000000280380 0000000000000000
>>>> 06, Europe, 0002000000400380 0000000000000000
>>>> 07, North America, 0000000004A80000 000000000001001A
>>>> 08, WCDMA ALL, 0002000004C00000 0000000000000000
>>>> 09, LTE ALL, 0000000000000000 000000000001001A
>>>>
>>>> 0000000000010000
>>>> - B17
>>>> 0000000000000010
>>>> - B5
>>>> 0000000000000008
>>>> - B4
>>>> 0000000000000002
>>>> - B2
>>>> 0002000000000000 - B8 (900)
>>>> 0000000004000000 - B5 (850)
>>>> 0000000000800000 - B2 (1900)
>>>> 0000000000400000 - B1 (2100)
>>>> 0000000000200000 - G1900
>>>> 0000000000080000 - G850
>>>> 0000000000000200 - G900P
>>>> 0000000000000100 - G900E
>>>> 0000000000000080 - G1800
>>>>
>>>> OK
>>>> It is set to all band
>>>> What you suggest ?
>>>> I change the firmware ?
>>>> I have another device but it is MC7455 , it register without problem
>>>> but when i do the at!gstatus? i got "LTE band: B4 "
>>>> Thanks
>>>>
>>>> 2017-01-22 9:34 GMT+01:00 heni wael <waelheni91 at gmail.com>:
>>>>
>>>>
>>>> _______________________________________________
>>>> libqmi-devel mailing list
>>>> libqmi-devel at lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>>>
>>>> Thanks for all your response
>>>> I have this
>>>>
>>>> at!band?
>>>>
>>>> Index, Name, GW Band Mask L Band Mask
>>>> 00, All Bands, 0002000004E80380 000000000001001A
>>>>
>>>>
>>>> OK
>>>>
>>>> at!band=?
>>>>
>>>> Index, Name, GW Band Mask L Band Mask
>>>> 00, All Bands, 0002000004E80380 000000000001001A
>>>> 01, Europe 3G, 0002000000400000 0000000000000000
>>>> 02, North America 3G, 0000000004800000 0000000000000000
>>>> 03, Europe 2G, 0000000000000380 0000000000000000
>>>> 04, North America 2G, 0000000000280000 0000000000000000
>>>> 05, GSM ALL, 0000000000280380 0000000000000000
>>>> 06, Europe, 0002000000400380 0000000000000000
>>>> 07, North America, 0000000004A80000 000000000001001A
>>>> 08, WCDMA ALL, 0002000004C00000 0000000000000000
>>>> 09, LTE ALL, 0000000000000000 000000000001001A
>>>>
>>>> 0000000000010000
>>>> - B17
>>>> 0000000000000010
>>>> - B5
>>>> 0000000000000008
>>>> - B4
>>>> 0000000000000002
>>>> - B2
>>>> 0002000000000000 - B8 (900)
>>>> 0000000004000000 - B5 (850)
>>>> 0000000000800000 - B2 (1900)
>>>> 0000000000400000 - B1 (2100)
>>>> 0000000000200000 - G1900
>>>> 0000000000080000 - G850
>>>> 0000000000000200 - G900P
>>>> 0000000000000100 - G900E
>>>> 0000000000000080 - G1800
>>>>
>>>> OK
>>>> It is set to all band
>>>> What you suggest ?
>>>> I change the firmware ?
>>>> I have another device but it is MC7455 , it register without problem
>>>> but when i do the at!gstatus? i got "LTE band: B4 "
>>>> Thanks
>>>>
>>>>
>>>> 2017-01-22 0:28 GMT+01:00 Ramesh Siripurapu <
>>>> ramesh.siripurapu at aptiwiz.com>:
>>>>
>>>>
>>>> MC7354 works with all US carriers. You just have to flash appropriate
>>>> firmware from Sierra website.
>>>>
>>>> ---- On Sat, 21 Jan 2017 14:05:19 -0800 *Tang Nguyen
>>>> <tang_nguyen at yahoo.com <tang_nguyen at yahoo.com>>* wrote ----
>>>>
>>>> Are you sure MC7354 loaded with Verizon firmware ? AFAIK, MC7354 is
>>>> loaded with ATT by default, so it doesn't support the LTE Verizon band.
>>>> MC7350 is a modem for Verizon. Try connect to Verizon network if you have
>>>> MC7350 modem.
>>>>
>>>> Tang
>>>>
>>>> Sent from my iPhone
>>>>
>>>> On Jan 21, 2017, at 4:37 PM, heni wael <waelheni91 at gmail.com> wrote:
>>>>
>>>> Thanks for your reply
>>>> look like not connected to the network
>>>> may be because band is 2 and verizon work with 4 and 13
>>>>
>>>> look at this
>>>> at+cgatt?
>>>>
>>>> +CGATT: 0
>>>>
>>>> OK
>>>>
>>>> at+cgatt=1
>>>> not working
>>>>
>>>> and i have this
>>>>
>>>>
>>>> at!gstatus?
>>>>
>>>> !GSTATUS:
>>>> Current Time: 5926 Temperature: 28
>>>> Bootup Time: 6 Mode: ONLINE
>>>> System mode: LTE PS state: Not attached
>>>> LTE band: B2 LTE bw: 5 MHz
>>>> LTE Rx chan: 975 LTE Tx chan: 65535
>>>> EMM state: Deregistered Limited Service
>>>> RRC state: RRC Idle
>>>> IMS reg state: No Srv
>>>>
>>>> RSSI (dBm): 0 Tx Power: 0
>>>> RSRP (dBm): 0 TAC: 0000 (0)
>>>> RSRQ (dB): 0 Cell ID: FFFFFFFF (4294967295)
>>>> SINR (dB): -20.0
>>>>
>>>>
>>>> Have you got an idea ?
>>>> Thanks
>>>>
>>>> 2017-01-21 22:36 GMT+01:00 heni wael <waelheni91 at gmail.com>:
>>>>
>>>> Thanks for your reply
>>>> look like not connected to the network
>>>> may be because band is 2 and verizon work with 4 and 13
>>>>
>>>> look at this
>>>> at+cgatt?
>>>>
>>>> +CGATT: 0
>>>>
>>>> OK
>>>>
>>>> at+cgatt=1
>>>> not working
>>>>
>>>> and i have this
>>>>
>>>>
>>>> at!gstatus?
>>>>
>>>> !GSTATUS:
>>>> Current Time: 5926 Temperature: 28
>>>> Bootup Time: 6 Mode: ONLINE
>>>> System mode: LTE PS state: Not attached
>>>> LTE band: B2 LTE bw: 5 MHz
>>>> LTE Rx chan: 975 LTE Tx chan: 65535
>>>> EMM state: Deregistered Limited Service
>>>> RRC state: RRC Idle
>>>> IMS reg state: No Srv
>>>>
>>>> RSSI (dBm): 0 Tx Power: 0
>>>> RSRP (dBm): 0 TAC: 0000 (0)
>>>> RSRQ (dB): 0 Cell ID: FFFFFFFF (4294967295)
>>>> SINR (dB): -20.0
>>>>
>>>>
>>>> Have you an idea
>>>>
>>>>
>>>> 2017-01-21 19:07 GMT+01:00 Sebastian Sjoholm <
>>>> sebastian.sjoholm at gmail.com>:
>>>>
>>>>
>>>> > [root at localhost ~]# qmi-network /dev/cdc-wdm0 start
>>>> > Loading profile at /etc/qmi-network.conf...
>>>> > APN: wexx.vzwstatic
>>>> > APN user: unset
>>>> > APN password: unset
>>>> > qmi-proxy: no
>>>> > Checking data format with 'qmicli -d /dev/cdc-wdm0
>>>> --wda-get-data-format '...
>>>> > Device link layer protocol retrieved: 802-3
>>>> > Getting expected data format with 'qmicli -d /dev/cdc-wdm0
>>>> --get-expected-data-format'...
>>>> > Expected link layer protocol retrieved: 802-3
>>>> > Device and kernel link layer protocol match: 802-3
>>>> > Starting network with 'qmicli -d /dev/cdc-wdm0
>>>> --wds-start-network=apn='wexx.vzwstatic' --client-no-release-cid '...
>>>> > error: couldn't start network: QMI protocol error (64): '(null)'
>>>> > Saving state at /tmp/qmi-network-state-cdc-wdm0... (CID: 9)
>>>> > error: network start failed, no packet data handle
>>>> > Clearing state at /tmp/qmi-network-state-cdc-wdm0...
>>>> >
>>>> > i can t connect
>>>> > can any one tell me what is wrong
>>>> >
>>>>
>>>> I guess first thing would be to verify that the network connection is
>>>> OK,
>>>>
>>>> PS state should be 1
>>>>
>>>> at+cgatt?
>>>>
>>>> Then you can see if you can get the PDP attached
>>>>
>>>> at+cgact=1,3
>>>> at+cgact?
>>>>
>>>> and IP address
>>>>
>>>> at+cgpaddr=3
>>>>
>>>> and network status
>>>>
>>>> at!gstatus?
>>>>
>>>> -Sebastian
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> libqmi-devel mailing list
>>>> libqmi-devel at lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>>>
>>>> _______________________________________________
>>>> libqmi-devel mailing list
>>>> libqmi-devel at lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel
>>>>
>>>>
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libqmi-devel/attachments/20170123/b610904e/attachment-0001.html>
More information about the libqmi-devel
mailing list