MC7354 with Verizon network

[Aleksander Morgado]

On Mon, Jan 23, 2017 at 11:39 PM, heni wael <waelheni91 at gmail.com> wrote:
> AT+CGDCONT=3,"IP","we01.vzwstatic","0.0.0.0",0,0
> and network is attached and the AT+CGCONTRDP gives address
>
> and i have this now
>
> [root at localhost ~]# qmicli -d /dev/cdc-wdm0 --wds-get-default-settings=3gpp
> Default settings retrieved:
>     APN: 'we01.vzwstatic'
>     PDP type: 'ipv4'
>     Auth: 'none'[root at localhost ~]# qmi-network  /dev/cdc-wdm0 start
> Loading profile at /etc/qmi-network.conf...
>     APN: vzwinternet
>     APN user: unset
>     APN password: unset
>     qmi-proxy: no
> Checking data format with 'qmicli -d /dev/cdc-wdm0 --wda-get-data-format
> '...
> Device link layer protocol retrieved: 802-3
> Getting expected data format with 'qmicli -d /dev/cdc-wdm0
> --get-expected-data-format'...
> Expected link layer protocol retrieved: 802-3
> Device and kernel link layer protocol match: 802-3
> Starting network with 'qmicli -d /dev/cdc-wdm0
> --wds-start-network=apn='vzwinternet'  --client-no-release-cid '...
> error: couldn't start network: QMI protocol error (64): '(null)'
> Saving state at /tmp/qmi-network-state-cdc-wdm0... (CID: 8)
> error: network start failed, no packet data handle
> Clearing state at /tmp/qmi-network-state-cdc-wdm0...

Which APN do you want to use? vzwinternet or we01.vzwstatic? I'd
suggest you keep the original Verizon firmware, and then forget about
doing anything with AT commands, just go on and configure the APN you
want to use in /etc/qmi-network.conf and run qmi-network start.

You're getting a protocol error we don't know about (64) so it's a bit
hard to say what that error could mean...

-- 
Aleksander
https://aleksander.es