Multiple instances of libqmi

[Krishna Kishore]

Hi Aleksander,

   Thanks for answering my questions.

    I have one more question.

    How do dual (Multiple) SIMs are supported? Will single QmiDevice be able to enumerate multiple SIMs and allow control/configure multiple SIMs?

Regards,
Kishore

Krishna Kishore
Senior Architect – Devices



Sasken Technologies Limited
139/25, Ring Road, Domlur, Bengaluru - 560 071, India
+91 98862 83935 | krishna.kishore at sasken.com | www.sasken.com



-----Original Message-----
From: Aleksander Morgado [mailto:aleksander at aleksander.es]
Sent: 27 February 2018 19:32
To: Krishna Kishore
Cc: libqmi-devel at lists.freedesktop.org; Praveen Kumar
Subject: Re: Multiple instances of libqmi

>
>    Thanks for your response. This helps.
>
>    Can you please let us know about the following?  How does it map to multiple QmiDevices?   We will use more than 1 Telit modules of same product id.
>
>            ==== This is from drivers/net/usb/qmi_wwan.c ===
>               {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},      /* Telit LE920 */
>         {QMI_FIXED_INTF(0x1bc7, 0x1201, 2)},    /* Telit LE920 */
>            =====
>

The kernel will create different /dev/cdc-wdmX devices for each modem, even if they all have the same vid:pid. Each QmiDevice will be associated to a different cdc-wdmX device.

--
Aleksander
https://aleksander.es
________________________________
Sasken rated in the Leadership Zone for Semiconductor and Telecommunication by Zinnov Zones 2017 - Product Engineering Services<https://www.sasken.com/discover/leadership-zone-2018>
________________________________

SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Technologies Limited ( formerly known as "Sasken Communication Technologies Limited" ) unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email.
Read Disclaimer at http://www.sasken.com/mail-disclaimer/

________________________________