forbidden networks

[Erik Kazandjian]

Is this are qmicli equivalent to do a manual networks selection ?

Regards

Erik


On 05/30/2018 01:20 PM, rspmn at arcor.de wrote:
>> Erik Kazandjian <erik.kazandjian at accelleran.com> hat am 30. Mai 2018 um 08:24 geschrieben:
>>
>>
>> Hi,
>>
>> when I do a nas network-scan I get the following results
>>
>>    sudo qmicli -d /dev/cdc-wdm0 --nas-network-scan
>> [/dev/cdc-wdm0] Successfully scanned networks
>> Network [0]:
>>       MCC: '1'
>>       MNC: '1'
>>       Status: 'available, home, forbidden, preferred'
>>       Description: 'Test PLMN 1-1'
>>
>>       ......
>>
>> Network [0]:
>>       MCC: '1'
>>       MNC: '1'
>>       RAT: 'lte'
>>
>>      .......
>>
>>
>> Now this first network is our own test network in the lab. However the
>> status is forbidden. Is there a way to reset this status to non-forbidden ?
>>
> Hi Erik,
>
> the status should be reset by the mobile to non-forbidden after a
> successful network registration to your test network with manual
> network selection e.g. with AT+COPS=1,2,"00101",7.
>
> Regards,
> Reinhard