forbidden networks

[Dan Williams]

On Thu, 2018-05-31 at 11:03 +0200, Reinhard Speyerer wrote:
> On Thu, May 31, 2018 at 09:26:57AM +0200, Erik Kazandjian wrote:
> > Is this are qmicli equivalent to do a manual networks selection ?
> > 
> > Regards
> > 
> > Erik
> > 
> 
> Hi Erik,
> 
> for qmicli to have manual network selection you would have to apply
> the corresponding patch from
> https://lists.freedesktop.org/archives/libqmi-devel/2018-May/002850.h
> tml
> and rebuild libqmi.

Just sent that patch with a small comment update to the list for
review.

Dan

> Using AT+COPS=1,2,"00101",7 should only be required once however as
> the
> mobile updates EF.FPLMN on the SIM after a successful network
> registration
> to your test network accordingly. Alternatively you could simply try
> to
> reset EF.FPLMN with AT+CRSM. Please refer to TS 27.007 available from
> http://www.3gpp.org/ for details.
> 
> Regards,
> Reinhard
> 
> > 
> > On 05/30/2018 01:20 PM, rspmn at arcor.de wrote:
> > > > Erik Kazandjian <erik.kazandjian at accelleran.com> hat am 30. Mai
> > > > 2018 um 08:24 geschrieben:
> > > > 
> > > > 
> > > > Hi,
> > > > 
> > > > when I do a nas network-scan I get the following results
> > > > 
> > > >    sudo qmicli -d /dev/cdc-wdm0 --nas-network-scan
> > > > [/dev/cdc-wdm0] Successfully scanned networks
> > > > Network [0]:
> > > >       MCC: '1'
> > > >       MNC: '1'
> > > >       Status: 'available, home, forbidden, preferred'
> > > >       Description: 'Test PLMN 1-1'
> > > > 
> > > >       ......
> > > > 
> > > > Network [0]:
> > > >       MCC: '1'
> > > >       MNC: '1'
> > > >       RAT: 'lte'
> > > > 
> > > >      .......
> > > > 
> > > > 
> > > > Now this first network is our own test network in the lab.
> > > > However the
> > > > status is forbidden. Is there a way to reset this status to
> > > > non-forbidden ?
> > > > 
> > > 
> > > Hi Erik,
> > > 
> > > the status should be reset by the mobile to non-forbidden after a
> > > successful network registration to your test network with manual
> > > network selection e.g. with AT+COPS=1,2,"00101",7.
> > > 
> > > Regards,
> > > Reinhard
> 
> _______________________________________________
> libqmi-devel mailing list
> libqmi-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/libqmi-devel