Network starting error in Quectel EC25-J .

[Mashkur Ahmad]

Hi ,
qmi-network start is not working , i have check all qmicli ,everything
seems good but even it is not working . if anyone can help me to get
started qmi dial up,
I have tested other commands i am able to get status, network, scan etc
I use Raspberry pi. i have intalled ltest libqmi

sudo qmi-network /dev/cdc-wdm0 start
Loading profile at /etc/qmi-network.conf...
    APN: isp.docomoiot.net
    APN user: unset
    APN password: unset
    qmi-proxy: yes
Checking data format with 'qmicli -d /dev/cdc-wdm0 --wda-get-data-format
--device-open-proxy'...
[07 Feb 2019, 09:34:25] -Warning ** [/dev/cdc-wdm0] requested auto mode but
no MBIM QMUX support available
Device link layer protocol retrieved: raw-ip
Getting expected data format with 'qmicli -d /dev/cdc-wdm0
--get-expected-data-format'...
[07 Feb 2019, 09:34:25] -Warning ** [/dev/cdc-wdm0] requested auto mode but
no MBIM QMUX support available
Expected link layer protocol retrieved: 802-3
Updating kernel link layer protocol with 'qmicli -d /dev/cdc-wdm0
--set-expected-data-format=raw-ip'...
[07 Feb 2019, 09:34:25] -Warning ** [/dev/cdc-wdm0] requested auto mode but
no MBIM QMUX support available
error: cannot set expected data format: Expected data format not updated
properly to 'raw-ip': got '802-3' instead
Error updating kernel link layer protocol
Starting network with 'qmicli -d /dev/cdc-wdm0 --wds-start-network=apn='
isp.docomoiot.net'  --client-no-release-cid --device-open-proxy'...
[07 Feb 2019, 09:34:25] -Warning ** [/dev/cdc-wdm0] requested auto mode but
no MBIM QMUX support available
error: couldn't start network: QMI protocol error (26): 'NoEffect'
Saving state at /tmp/qmi-network-state-cdc-wdm0... (CID: 20)
error: network start failed, no packet data handle
[07 Feb 2019, 09:34:26] -Warning ** [/dev/cdc-wdm0] requested auto mode but
no MBIM QMUX support available
Clearing state at /tmp/qmi-network-state-cdc-wdm0...

Thanks
Mashkur Khadmi
Oita,Japan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libqmi-devel/attachments/20190207/974d931b/attachment.html>