Fw: question about qmicli

[Galo Irarrazabal]

thanks Aleksander,
I will make the changes in the code to use only one WDS CID
and remake the compile of the library

best regards
Galo Irarrazabal O

________________________________
From: Aleksander Morgado <aleksander at aleksander.es>
Sent: Tuesday, October 27, 2020 9:30 AM
To: Galo Irarrazabal <girarraz at hotmail.com>
Cc: libqmi-devel at lists.freedesktop.org <libqmi-devel at lists.freedesktop.org>
Subject: Re: Fw: question about qmicli

Hey,

>
> the distribution of the linux i'm using is linux raspbian buster (the last version) in a raspberry pi CM3+
> if i specifically put the path in /usr/lib all commands work ok and withput errors.
>

I still suggest you build and install with --prefix=/usr and
--libdir=/usr/lib/<SOMETHING> where <SOMETHING> is where Debian puts
the libraries inside, you can probably find that directory name
easily. That way you won't need the LD_LIBRARY_PATH.

Or well, if this is more than just a hobby project, you should
probably think about actually repackaging the MM you're using for that
distro.

>
> sudo  LD_LIBRARY_PATH=/usr/lib qmicli -p -d /dev/cdc-wdm0 --device-open-net='net-raw-ip|net-no-qos-header' --wds-start-network="apn='APN',ip-type=4" --client-no-release-cid
>
> in the case of wds service,  What is the right way to get CID and  not release them. i need to execute a wds-noop first and then execute the connection?
>

Whatever you prefer. I usually use the wds-noop step to perform the
client allocation on itself, and then reuse it. But you can definitely
do client allocation on --wds-start-network if you prefer

> and what happen with the CID when the connection are losed? i need to request another CID with wds-noop or i can reuse the existent ?
>

The CID is not lost. You can reuse it as much as needed.


--
Aleksander
https://aleksander.es
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/libqmi-devel/attachments/20201027/131d4b1e/attachment.htm>