[Libreoffice] module wizards build is broken

[Jean-Baptiste Faure]

Hi Michael,

Le 07/12/2011 12:12, Michael Meeks a écrit :
> Hi there,
> 
> On Wed, 2011-12-07 at 10:13 +0100, Jean-Baptiste Faure wrote:
>> Le 07/12/2011 00:55, Caolán McNamara a écrit :
>>> On Tue, 2011-12-06 at 13:49 +0100, Jean-Baptiste Faure wrote:
>>>> I did a fresh build : autogen.sh -> make clean -> make fetch -> make
>>>> The problem seems to be in pyfax_pyuno
>>>
>>> should be ok now I think.
>>
>> I am afraid the master is still broken. Fresh build this morning, still
>> the same error message:
> 
> 	Grief; I just did one from clean too - and it is fine for me :-)
> 
> gb_Deliver_deliver: file does not exist in solver, and cannot be delivered: /home/jbf/LibO/master/solver/unxlngx6.pro/bin/pyfax.zip. Arrêt.
> 
> 	Any chance of poking around further back up the log for a rule that
> failed to build that file ? unfortunately the relevant gnumake error is
> not always right next to the ultimate failure (particularly in a
> parallel build). Perhaps just the entire log from running 'make' inside
> wizards might help.

Here is the log of "make -r" in ../master/wizards after a "make -sr clean".

Last lines of "general" make log are:

> Not using Mac OS X - nothing to build
> Running processes: 0
> Running processes: 1
> extensions deliver
> Module 'extensions' delivered successfully. 68 files copied, 7 files unchanged
> Running processes: 0
> 
> -----------------------------------------------------------------------
>         Oh dear - something failed during the build - sorry !
>   For more help with debugging build errors, please see the section in:
>             http://wiki.documentfoundation.org/Development
> 
>   internal build errors:
> 
> ERROR: error 65280 occurred while making /home/jbf/LibO/master/tail_build/prj
> ERROR: error 65280 occurred while making /home/jbf/LibO/master/wizards/prj
> 
>  it seems you are using a threaded build, which means that the
>  actual compile error is probably hidden far above, and could be
>  inside any of these other modules:
>      tail_build
>  please re-run build inside each one to isolate the problem.
> -----------------------------------------------------------------------
> 
> /bin/bash
> cd /home/jbf/LibO/master
> source ./Env.Host.sh
> cd wizards
> make clean # optional
> make -r
> 
> when the problem is isolated and fixed exit and re-run 'make' from the top-level
> make[1]: *** [instsetoo_native] Erreur 1
> make[1]: quittant le répertoire « /home/jbf/LibO/master »
> make: *** [source-env-and-recurse] Erreur 2
> 

I tried a make -r in tail_build and got the following messages:

> jbf at tux-laptop:~/LibO/master/tail_build$ make -r
> /home/jbf/LibO/master/desktop/Library_spl.mk:53: 
> [ WARN   ] !!!
> [ WARN   ] !!! desktop/source/migration/migration is linked in by Library/libsofficeapp.so Library/libspllo.so
> [ WARN   ] !!!
> /home/jbf/LibO/master/desktop/Library_unopkgapp.mk:58: 
> [ WARN   ] !!!
> [ WARN   ] !!! desktop/source/app/lockfile is linked in by Library/libsofficeapp.so Library/libunopkgapp.so
> [ WARN   ] !!!
> /home/jbf/LibO/master/desktop/Executable_soffice.bin.mk:48: 
> [ WARN   ] !!!
> [ WARN   ] !!! desktop/source/app/copyright_ascii_ooo is linked in by Library/libsofficeapp.so Executable/soffice.bin
> [ WARN   ] !!!
> /home/jbf/LibO/master/desktop/Executable_soffice.bin.mk:48: 
> [ WARN   ] !!!
> [ WARN   ] !!! desktop/source/app/main is linked in by Library/libsofficeapp.so Executable/soffice.bin
> [ WARN   ] !!!
> /home/jbf/LibO/master/solenv/gbuild/Package.mk:33: *** gb_Deliver_deliver: file does not exist in solver, and cannot be delivered: /home/jbf/LibO/master/solver/unxlngx6.pro/bin/mailmerge.zip. Arrêt.

Apparently the same problem with mailmerge.zip as for pyfax.zip

Hope this helps

JBF

-- 
Seuls des formats ouverts peuvent assurer la pérennité de vos documents.
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: make_wizards.log
URL: <http://lists.freedesktop.org/archives/libreoffice/attachments/20111207/09968777/attachment.ksh>