[Libreoffice] First build has stalled...

[Jonathan Aquilina]

On 04/05/2011 11:21, Christian Lohmaier wrote:
> Hi *,
>
> On Wed, May 4, 2011 at 5:42 AM, Jonathan Aquilina
> <eagles051387 at gmail.com>  wrote:
>> Same issue had happened to me. I would like an explanation as to why cloning
>> is so slow. Just to clone all the repos it took me about 18 hrs at about 20
>> to 25 kbps
> It's not only cloning, but also pulling.
>
> Explanation is simple: freedesktop.org servers have either load or
> bandwidth problems (i.e. problems lies in capacity of the hardware) or
> are misconfigured (hardware could perform better, but software makes
> the trouble).
> But I guess you don't consider this as "explanation" - but just
> stating the obvious :-)
>
> I too would like to know where the problem lies.
>
> Initially the bandwith wasn't great to begin with either (around
> 300kb/s when I did the first clone), but at least when pulling this
> didn't matter too much. Also it seems that not only git, but also
> bugzilla is a little slower to respond.
>
> ciao
> Christian

Christian if load is an issue why not setup load balancing and put in 
more network cards into the server and spread the load across the 
network cards. for example

3 pci gigabit network cards and onboard motherboard network card and 
load balance between them.