[Mesa-dev] [v2 09/10] egl: dri2: support for creating images out of dma buffers
Topi Pohjolainen
topi.pohjolainen at intel.com
Mon Apr 29 04:08:03 PDT 2013
Signed-off-by: Topi Pohjolainen <topi.pohjolainen at intel.com>
---
src/egl/drivers/dri2/egl_dri2.c | 238 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 238 insertions(+)
diff --git a/src/egl/drivers/dri2/egl_dri2.c b/src/egl/drivers/dri2/egl_dri2.c
index 10fdcef..2a8c614 100644
--- a/src/egl/drivers/dri2/egl_dri2.c
+++ b/src/egl/drivers/dri2/egl_dri2.c
@@ -34,6 +34,7 @@
#include <errno.h>
#include <unistd.h>
#include <xf86drm.h>
+#include <drm_fourcc.h>
#include <GL/gl.h>
#include <GL/internal/dri_interface.h>
#include <sys/types.h>
@@ -1170,6 +1171,241 @@ dri2_create_image_mesa_drm_buffer(_EGLDisplay *disp, _EGLContext *ctx,
return dri2_create_image(disp, dri_image);
}
+static EGLBoolean
+dri2_check_dma_buf_attribs(const _EGLImageAttribs *attrs)
+{
+ unsigned i;
+
+ /**
+ * The spec says:
+ *
+ * "Required attributes and their values are as follows:
+ *
+ * * EGL_WIDTH & EGL_HEIGHT: The logical dimensions of the buffer in pixels
+ *
+ * * EGL_LINUX_DRM_FOURCC_EXT: The pixel format of the buffer, as specified
+ * by drm_fourcc.h and used as the pixel_format parameter of the
+ * drm_mode_fb_cmd2 ioctl."
+ *
+ * * EGL_DMA_BUF_PLANE0_FD_EXT: The dma_buf file descriptor of plane 0 of
+ * the image.
+ *
+ * * EGL_DMA_BUF_PLANE0_OFFSET_EXT: The offset from the start of the
+ * dma_buf of the first sample in plane 0, in bytes.
+ *
+ * * EGL_DMA_BUF_PLANE0_PITCH_EXT: The number of bytes between the start of
+ * subsequent rows of samples in plane 0. May have special meaning for
+ * non-linear formats."
+ *
+ * "* If <target> is EGL_LINUX_DMA_BUF_EXT, and the list of attributes is
+ * incomplete, EGL_BAD_PARAMETER is generated."
+ */
+ if (attrs->Width <= 0 || attrs->Height <= 0 ||
+ !attrs->DMABufFourCC.IsPresent ||
+ !attrs->DMABufPlaneFds[0].IsPresent ||
+ !attrs->DMABufPlaneOffsets[0].IsPresent ||
+ !attrs->DMABufPlanePitches[0].IsPresent) {
+ _eglError(EGL_BAD_PARAMETER, "attribute(s) missing");
+ return EGL_FALSE;
+ }
+
+ /**
+ * Also:
+ *
+ * "If <target> is EGL_LINUX_DMA_BUF_EXT and one or more of the values
+ * specified for a plane's pitch or offset isn't supported by EGL,
+ * EGL_BAD_ACCESS is generated."
+ */
+ for (i = 0; i < sizeof(attrs->DMABufPlanePitches) /
+ sizeof(attrs->DMABufPlanePitches[0]); ++i) {
+ if (attrs->DMABufPlanePitches[i].IsPresent &&
+ attrs->DMABufPlanePitches[i].Value <= 0) {
+ _eglError(EGL_BAD_ACCESS, "invalid pitch");
+ return EGL_FALSE;
+ }
+ }
+
+ return EGL_TRUE;
+}
+
+/* Returns the total number of file descriptors zero indicating an error. */
+static unsigned
+dri2_check_dma_buf_format(const _EGLImageAttribs *attrs)
+{
+ switch (attrs->DMABufFourCC.Value) {
+ case DRM_FORMAT_RGB332:
+ case DRM_FORMAT_BGR233:
+ case DRM_FORMAT_XRGB4444:
+ case DRM_FORMAT_XBGR4444:
+ case DRM_FORMAT_RGBX4444:
+ case DRM_FORMAT_BGRX4444:
+ case DRM_FORMAT_ARGB4444:
+ case DRM_FORMAT_ABGR4444:
+ case DRM_FORMAT_RGBA4444:
+ case DRM_FORMAT_BGRA4444:
+ case DRM_FORMAT_XRGB1555:
+ case DRM_FORMAT_XBGR1555:
+ case DRM_FORMAT_RGBX5551:
+ case DRM_FORMAT_BGRX5551:
+ case DRM_FORMAT_ARGB1555:
+ case DRM_FORMAT_ABGR1555:
+ case DRM_FORMAT_RGBA5551:
+ case DRM_FORMAT_BGRA5551:
+ case DRM_FORMAT_RGB565:
+ case DRM_FORMAT_BGR565:
+ case DRM_FORMAT_RGB888:
+ case DRM_FORMAT_BGR888:
+ case DRM_FORMAT_XRGB8888:
+ case DRM_FORMAT_XBGR8888:
+ case DRM_FORMAT_RGBX8888:
+ case DRM_FORMAT_BGRX8888:
+ case DRM_FORMAT_ARGB8888:
+ case DRM_FORMAT_ABGR8888:
+ case DRM_FORMAT_RGBA8888:
+ case DRM_FORMAT_BGRA8888:
+ case DRM_FORMAT_XRGB2101010:
+ case DRM_FORMAT_XBGR2101010:
+ case DRM_FORMAT_RGBX1010102:
+ case DRM_FORMAT_BGRX1010102:
+ case DRM_FORMAT_ARGB2101010:
+ case DRM_FORMAT_ABGR2101010:
+ case DRM_FORMAT_RGBA1010102:
+ case DRM_FORMAT_BGRA1010102:
+ case DRM_FORMAT_YUYV:
+ case DRM_FORMAT_YVYU:
+ case DRM_FORMAT_UYVY:
+ case DRM_FORMAT_VYUY:
+ /* There must be one and only one plane present */
+ if (attrs->DMABufPlaneFds[0].IsPresent &&
+ attrs->DMABufPlaneOffsets[0].IsPresent &&
+ attrs->DMABufPlanePitches[0].IsPresent &&
+ !attrs->DMABufPlaneFds[1].IsPresent &&
+ !attrs->DMABufPlaneOffsets[1].IsPresent &&
+ !attrs->DMABufPlanePitches[1].IsPresent &&
+ !attrs->DMABufPlaneFds[2].IsPresent &&
+ !attrs->DMABufPlaneOffsets[2].IsPresent &&
+ !attrs->DMABufPlanePitches[2].IsPresent)
+ return 1;
+ case DRM_FORMAT_NV12:
+ case DRM_FORMAT_NV21:
+ case DRM_FORMAT_NV16:
+ case DRM_FORMAT_NV61:
+ /* There must be two and only two planes present */
+ if (attrs->DMABufPlaneFds[0].IsPresent &&
+ attrs->DMABufPlaneOffsets[0].IsPresent &&
+ attrs->DMABufPlanePitches[0].IsPresent &&
+ attrs->DMABufPlaneFds[1].IsPresent &&
+ attrs->DMABufPlaneOffsets[1].IsPresent &&
+ attrs->DMABufPlanePitches[1].IsPresent &&
+ !attrs->DMABufPlaneFds[2].IsPresent &&
+ !attrs->DMABufPlaneOffsets[2].IsPresent &&
+ !attrs->DMABufPlanePitches[2].IsPresent)
+ return 2;
+ break;
+ case DRM_FORMAT_YUV410:
+ case DRM_FORMAT_YVU410:
+ case DRM_FORMAT_YUV411:
+ case DRM_FORMAT_YVU411:
+ case DRM_FORMAT_YUV420:
+ case DRM_FORMAT_YVU420:
+ case DRM_FORMAT_YUV422:
+ case DRM_FORMAT_YVU422:
+ case DRM_FORMAT_YUV444:
+ case DRM_FORMAT_YVU444:
+ /* All three planes must be specified */
+ if (attrs->DMABufPlaneFds[0].IsPresent &&
+ attrs->DMABufPlaneOffsets[0].IsPresent &&
+ attrs->DMABufPlanePitches[0].IsPresent &&
+ attrs->DMABufPlaneFds[1].IsPresent &&
+ attrs->DMABufPlaneOffsets[1].IsPresent &&
+ attrs->DMABufPlanePitches[1].IsPresent &&
+ attrs->DMABufPlaneFds[2].IsPresent &&
+ attrs->DMABufPlaneOffsets[2].IsPresent &&
+ attrs->DMABufPlanePitches[2].IsPresent)
+ return 3;
+ break;
+ default:
+ /*
+ * The spec says:
+ *
+ * "If <target> is EGL_LINUX_DMA_BUF_EXT, and the EGL_LINUX_DRM_FOURCC_EXT
+ * attribute is set to a format not supported by the EGL, EGL_BAD_MATCH
+ * is generated."
+ */
+ _eglError(EGL_BAD_MATCH, "invalid format");
+ return 0;
+ }
+
+ /**
+ * The spec says:
+ *
+ * "If <target> is EGL_LINUX_DMA_BUF_EXT, and the EGL_LINUX_DRM_FOURCC_EXT
+ * attribute indicates a single-plane format, EGL_BAD_ATTRIBUTE is
+ * generated if any of the EGL_DMA_BUF_PLANE1_* or EGL_DMA_BUF_PLANE2_*
+ * attributes are specified."
+ */
+ _eglError(EGL_BAD_ATTRIBUTE, "invalid number of planes");
+
+ return 0;
+}
+
+static _EGLImage *
+dri2_create_image_dma_buf(_EGLDisplay *disp, _EGLContext *ctx,
+ EGLClientBuffer buffer, const EGLint *attr_list)
+{
+ struct dri2_egl_display *dri2_dpy = dri2_egl_display(disp);
+ EGLint err;
+ _EGLImageAttribs attrs;
+ __DRIimage *dri_image;
+ unsigned num_fds;
+ unsigned i;
+ int fds[3];
+ int pitches[3];
+ int offsets[3];
+
+ /**
+ * The spec says:
+ *
+ * ""* If <target> is EGL_LINUX_DMA_BUF_EXT and <buffer> is not NULL, the
+ * error EGL_BAD_PARAMETER is generated."
+ */
+ if (buffer != NULL) {
+ _eglError(EGL_BAD_PARAMETER, "buffer not NULL");
+ return NULL;
+ }
+
+ err = _eglParseImageAttribList(&attrs, disp, attr_list);
+ if (err != EGL_SUCCESS) {
+ _eglError(err, "bad attribute");
+ return NULL;
+ }
+
+ if (!dri2_check_dma_buf_attribs(&attrs))
+ return NULL;
+
+ num_fds = dri2_check_dma_buf_format(&attrs);
+ if (!num_fds)
+ return NULL;
+
+ for (i = 0; i < num_fds; ++i) {
+ fds[i] = attrs.DMABufPlaneFds[i].Value;
+ pitches[i] = attrs.DMABufPlanePitches[i].Value;
+ offsets[i] = attrs.DMABufPlaneOffsets[i].Value;
+ }
+
+ dri_image =
+ dri2_dpy->image->createImageFromFds(dri2_dpy->dri_screen,
+ attrs.Width, attrs.Height, attrs.DMABufFourCC.Value,
+ fds, num_fds, pitches, offsets,
+ attrs.DMABufYuvColorSpaceHint.Value,
+ attrs.DMABufSampleRangeHint.Value,
+ attrs.DMABufChromaHorizontalSiting.Value,
+ attrs.DMABufChromaVerticalSiting.Value,
+ NULL);
+
+ return dri2_create_image(disp, dri_image);
+}
+
#ifdef HAVE_WAYLAND_PLATFORM
/* This structure describes how a wl_buffer maps to one or more
@@ -1364,6 +1600,8 @@ dri2_create_image_khr(_EGLDriver *drv, _EGLDisplay *disp,
case EGL_WAYLAND_BUFFER_WL:
return dri2_create_image_wayland_wl_buffer(disp, ctx, buffer, attr_list);
#endif
+ case EGL_LINUX_DMA_BUF_EXT:
+ return dri2_create_image_dma_buf(disp, ctx, buffer, attr_list);
default:
_eglError(EGL_BAD_PARAMETER, "dri2_create_image_khr");
return EGL_NO_IMAGE_KHR;
--
1.8.1.2
More information about the mesa-dev
mailing list