[Mesa-dev] [v2 09/10] egl: dri2: support for creating images out of dma buffers
Daniel Vetter
daniel at ffwll.ch
Mon Apr 29 14:48:28 PDT 2013
On Mon, Apr 29, 2013 at 02:08:03PM +0300, Topi Pohjolainen wrote:
> Signed-off-by: Topi Pohjolainen <topi.pohjolainen at intel.com>
Shouldn't we close the imported dma_buf fds somewhere after the call to
createImageFromFds? Or have I missed something?
The wayland platform code seems to do that in create_wl_buffer.
-Daniel
> ---
> src/egl/drivers/dri2/egl_dri2.c | 238 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 238 insertions(+)
>
> diff --git a/src/egl/drivers/dri2/egl_dri2.c b/src/egl/drivers/dri2/egl_dri2.c
> index 10fdcef..2a8c614 100644
> --- a/src/egl/drivers/dri2/egl_dri2.c
> +++ b/src/egl/drivers/dri2/egl_dri2.c
> @@ -34,6 +34,7 @@
> #include <errno.h>
> #include <unistd.h>
> #include <xf86drm.h>
> +#include <drm_fourcc.h>
> #include <GL/gl.h>
> #include <GL/internal/dri_interface.h>
> #include <sys/types.h>
> @@ -1170,6 +1171,241 @@ dri2_create_image_mesa_drm_buffer(_EGLDisplay *disp, _EGLContext *ctx,
> return dri2_create_image(disp, dri_image);
> }
>
> +static EGLBoolean
> +dri2_check_dma_buf_attribs(const _EGLImageAttribs *attrs)
> +{
> + unsigned i;
> +
> + /**
> + * The spec says:
> + *
> + * "Required attributes and their values are as follows:
> + *
> + * * EGL_WIDTH & EGL_HEIGHT: The logical dimensions of the buffer in pixels
> + *
> + * * EGL_LINUX_DRM_FOURCC_EXT: The pixel format of the buffer, as specified
> + * by drm_fourcc.h and used as the pixel_format parameter of the
> + * drm_mode_fb_cmd2 ioctl."
> + *
> + * * EGL_DMA_BUF_PLANE0_FD_EXT: The dma_buf file descriptor of plane 0 of
> + * the image.
> + *
> + * * EGL_DMA_BUF_PLANE0_OFFSET_EXT: The offset from the start of the
> + * dma_buf of the first sample in plane 0, in bytes.
> + *
> + * * EGL_DMA_BUF_PLANE0_PITCH_EXT: The number of bytes between the start of
> + * subsequent rows of samples in plane 0. May have special meaning for
> + * non-linear formats."
> + *
> + * "* If <target> is EGL_LINUX_DMA_BUF_EXT, and the list of attributes is
> + * incomplete, EGL_BAD_PARAMETER is generated."
> + */
> + if (attrs->Width <= 0 || attrs->Height <= 0 ||
> + !attrs->DMABufFourCC.IsPresent ||
> + !attrs->DMABufPlaneFds[0].IsPresent ||
> + !attrs->DMABufPlaneOffsets[0].IsPresent ||
> + !attrs->DMABufPlanePitches[0].IsPresent) {
> + _eglError(EGL_BAD_PARAMETER, "attribute(s) missing");
> + return EGL_FALSE;
> + }
> +
> + /**
> + * Also:
> + *
> + * "If <target> is EGL_LINUX_DMA_BUF_EXT and one or more of the values
> + * specified for a plane's pitch or offset isn't supported by EGL,
> + * EGL_BAD_ACCESS is generated."
> + */
> + for (i = 0; i < sizeof(attrs->DMABufPlanePitches) /
> + sizeof(attrs->DMABufPlanePitches[0]); ++i) {
> + if (attrs->DMABufPlanePitches[i].IsPresent &&
> + attrs->DMABufPlanePitches[i].Value <= 0) {
> + _eglError(EGL_BAD_ACCESS, "invalid pitch");
> + return EGL_FALSE;
> + }
> + }
> +
> + return EGL_TRUE;
> +}
> +
> +/* Returns the total number of file descriptors zero indicating an error. */
> +static unsigned
> +dri2_check_dma_buf_format(const _EGLImageAttribs *attrs)
> +{
> + switch (attrs->DMABufFourCC.Value) {
> + case DRM_FORMAT_RGB332:
> + case DRM_FORMAT_BGR233:
> + case DRM_FORMAT_XRGB4444:
> + case DRM_FORMAT_XBGR4444:
> + case DRM_FORMAT_RGBX4444:
> + case DRM_FORMAT_BGRX4444:
> + case DRM_FORMAT_ARGB4444:
> + case DRM_FORMAT_ABGR4444:
> + case DRM_FORMAT_RGBA4444:
> + case DRM_FORMAT_BGRA4444:
> + case DRM_FORMAT_XRGB1555:
> + case DRM_FORMAT_XBGR1555:
> + case DRM_FORMAT_RGBX5551:
> + case DRM_FORMAT_BGRX5551:
> + case DRM_FORMAT_ARGB1555:
> + case DRM_FORMAT_ABGR1555:
> + case DRM_FORMAT_RGBA5551:
> + case DRM_FORMAT_BGRA5551:
> + case DRM_FORMAT_RGB565:
> + case DRM_FORMAT_BGR565:
> + case DRM_FORMAT_RGB888:
> + case DRM_FORMAT_BGR888:
> + case DRM_FORMAT_XRGB8888:
> + case DRM_FORMAT_XBGR8888:
> + case DRM_FORMAT_RGBX8888:
> + case DRM_FORMAT_BGRX8888:
> + case DRM_FORMAT_ARGB8888:
> + case DRM_FORMAT_ABGR8888:
> + case DRM_FORMAT_RGBA8888:
> + case DRM_FORMAT_BGRA8888:
> + case DRM_FORMAT_XRGB2101010:
> + case DRM_FORMAT_XBGR2101010:
> + case DRM_FORMAT_RGBX1010102:
> + case DRM_FORMAT_BGRX1010102:
> + case DRM_FORMAT_ARGB2101010:
> + case DRM_FORMAT_ABGR2101010:
> + case DRM_FORMAT_RGBA1010102:
> + case DRM_FORMAT_BGRA1010102:
> + case DRM_FORMAT_YUYV:
> + case DRM_FORMAT_YVYU:
> + case DRM_FORMAT_UYVY:
> + case DRM_FORMAT_VYUY:
> + /* There must be one and only one plane present */
> + if (attrs->DMABufPlaneFds[0].IsPresent &&
> + attrs->DMABufPlaneOffsets[0].IsPresent &&
> + attrs->DMABufPlanePitches[0].IsPresent &&
> + !attrs->DMABufPlaneFds[1].IsPresent &&
> + !attrs->DMABufPlaneOffsets[1].IsPresent &&
> + !attrs->DMABufPlanePitches[1].IsPresent &&
> + !attrs->DMABufPlaneFds[2].IsPresent &&
> + !attrs->DMABufPlaneOffsets[2].IsPresent &&
> + !attrs->DMABufPlanePitches[2].IsPresent)
> + return 1;
> + case DRM_FORMAT_NV12:
> + case DRM_FORMAT_NV21:
> + case DRM_FORMAT_NV16:
> + case DRM_FORMAT_NV61:
> + /* There must be two and only two planes present */
> + if (attrs->DMABufPlaneFds[0].IsPresent &&
> + attrs->DMABufPlaneOffsets[0].IsPresent &&
> + attrs->DMABufPlanePitches[0].IsPresent &&
> + attrs->DMABufPlaneFds[1].IsPresent &&
> + attrs->DMABufPlaneOffsets[1].IsPresent &&
> + attrs->DMABufPlanePitches[1].IsPresent &&
> + !attrs->DMABufPlaneFds[2].IsPresent &&
> + !attrs->DMABufPlaneOffsets[2].IsPresent &&
> + !attrs->DMABufPlanePitches[2].IsPresent)
> + return 2;
> + break;
> + case DRM_FORMAT_YUV410:
> + case DRM_FORMAT_YVU410:
> + case DRM_FORMAT_YUV411:
> + case DRM_FORMAT_YVU411:
> + case DRM_FORMAT_YUV420:
> + case DRM_FORMAT_YVU420:
> + case DRM_FORMAT_YUV422:
> + case DRM_FORMAT_YVU422:
> + case DRM_FORMAT_YUV444:
> + case DRM_FORMAT_YVU444:
> + /* All three planes must be specified */
> + if (attrs->DMABufPlaneFds[0].IsPresent &&
> + attrs->DMABufPlaneOffsets[0].IsPresent &&
> + attrs->DMABufPlanePitches[0].IsPresent &&
> + attrs->DMABufPlaneFds[1].IsPresent &&
> + attrs->DMABufPlaneOffsets[1].IsPresent &&
> + attrs->DMABufPlanePitches[1].IsPresent &&
> + attrs->DMABufPlaneFds[2].IsPresent &&
> + attrs->DMABufPlaneOffsets[2].IsPresent &&
> + attrs->DMABufPlanePitches[2].IsPresent)
> + return 3;
> + break;
> + default:
> + /*
> + * The spec says:
> + *
> + * "If <target> is EGL_LINUX_DMA_BUF_EXT, and the EGL_LINUX_DRM_FOURCC_EXT
> + * attribute is set to a format not supported by the EGL, EGL_BAD_MATCH
> + * is generated."
> + */
> + _eglError(EGL_BAD_MATCH, "invalid format");
> + return 0;
> + }
> +
> + /**
> + * The spec says:
> + *
> + * "If <target> is EGL_LINUX_DMA_BUF_EXT, and the EGL_LINUX_DRM_FOURCC_EXT
> + * attribute indicates a single-plane format, EGL_BAD_ATTRIBUTE is
> + * generated if any of the EGL_DMA_BUF_PLANE1_* or EGL_DMA_BUF_PLANE2_*
> + * attributes are specified."
> + */
> + _eglError(EGL_BAD_ATTRIBUTE, "invalid number of planes");
> +
> + return 0;
> +}
> +
> +static _EGLImage *
> +dri2_create_image_dma_buf(_EGLDisplay *disp, _EGLContext *ctx,
> + EGLClientBuffer buffer, const EGLint *attr_list)
> +{
> + struct dri2_egl_display *dri2_dpy = dri2_egl_display(disp);
> + EGLint err;
> + _EGLImageAttribs attrs;
> + __DRIimage *dri_image;
> + unsigned num_fds;
> + unsigned i;
> + int fds[3];
> + int pitches[3];
> + int offsets[3];
> +
> + /**
> + * The spec says:
> + *
> + * ""* If <target> is EGL_LINUX_DMA_BUF_EXT and <buffer> is not NULL, the
> + * error EGL_BAD_PARAMETER is generated."
> + */
> + if (buffer != NULL) {
> + _eglError(EGL_BAD_PARAMETER, "buffer not NULL");
> + return NULL;
> + }
> +
> + err = _eglParseImageAttribList(&attrs, disp, attr_list);
> + if (err != EGL_SUCCESS) {
> + _eglError(err, "bad attribute");
> + return NULL;
> + }
> +
> + if (!dri2_check_dma_buf_attribs(&attrs))
> + return NULL;
> +
> + num_fds = dri2_check_dma_buf_format(&attrs);
> + if (!num_fds)
> + return NULL;
> +
> + for (i = 0; i < num_fds; ++i) {
> + fds[i] = attrs.DMABufPlaneFds[i].Value;
> + pitches[i] = attrs.DMABufPlanePitches[i].Value;
> + offsets[i] = attrs.DMABufPlaneOffsets[i].Value;
> + }
> +
> + dri_image =
> + dri2_dpy->image->createImageFromFds(dri2_dpy->dri_screen,
> + attrs.Width, attrs.Height, attrs.DMABufFourCC.Value,
> + fds, num_fds, pitches, offsets,
> + attrs.DMABufYuvColorSpaceHint.Value,
> + attrs.DMABufSampleRangeHint.Value,
> + attrs.DMABufChromaHorizontalSiting.Value,
> + attrs.DMABufChromaVerticalSiting.Value,
> + NULL);
> +
> + return dri2_create_image(disp, dri_image);
> +}
> +
> #ifdef HAVE_WAYLAND_PLATFORM
>
> /* This structure describes how a wl_buffer maps to one or more
> @@ -1364,6 +1600,8 @@ dri2_create_image_khr(_EGLDriver *drv, _EGLDisplay *disp,
> case EGL_WAYLAND_BUFFER_WL:
> return dri2_create_image_wayland_wl_buffer(disp, ctx, buffer, attr_list);
> #endif
> + case EGL_LINUX_DMA_BUF_EXT:
> + return dri2_create_image_dma_buf(disp, ctx, buffer, attr_list);
> default:
> _eglError(EGL_BAD_PARAMETER, "dri2_create_image_khr");
> return EGL_NO_IMAGE_KHR;
> --
> 1.8.1.2
>
> _______________________________________________
> mesa-dev mailing list
> mesa-dev at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/mesa-dev
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the mesa-dev
mailing list