[Mesa-dev] [PATCH v3 17/18] i965: refactor miptree alignment calculation code
Nanley Chery
nanleychery at gmail.com
Mon Jun 22 16:02:23 PDT 2015
From: Nanley Chery <nanley.g.chery at intel.com>
Remove redundant checks and comments by grouping our calculations for
align_w and align_h wherever possible.
v2: reintroduce brw.
don't include functional changes.
don't adjust function parameters or create a new function.
Signed-off-by: Nanley Chery <nanley.g.chery at intel.com>
---
src/mesa/drivers/dri/i965/brw_tex_layout.c | 85 +++++++++++-------------------
1 file changed, 30 insertions(+), 55 deletions(-)
diff --git a/src/mesa/drivers/dri/i965/brw_tex_layout.c b/src/mesa/drivers/dri/i965/brw_tex_layout.c
index 840a069..493ed4f 100644
--- a/src/mesa/drivers/dri/i965/brw_tex_layout.c
+++ b/src/mesa/drivers/dri/i965/brw_tex_layout.c
@@ -123,12 +123,6 @@ intel_horizontal_texture_alignment_unit(struct brw_context *brw,
return 16;
/**
- * From the "Alignment Unit Size" section of various specs, namely:
- * - Gen3 Spec: "Memory Data Formats" Volume, Section 1.20.1.4
- * - i965 and G45 PRMs: Volume 1, Section 6.17.3.4.
- * - Ironlake and Sandybridge PRMs: Volume 1, Part 1, Section 7.18.3.4
- * - BSpec (for Ivybridge and slight variations in separate stencil)
- *
* +----------------------------------------------------------------------+
* | | alignment unit width ("i") |
* | Surface Property |-----------------------------|
@@ -146,32 +140,6 @@ intel_horizontal_texture_alignment_unit(struct brw_context *brw,
* On IVB+, non-special cases can be overridden by setting the SURFACE_STATE
* "Surface Horizontal Alignment" field to HALIGN_4 or HALIGN_8.
*/
- if (_mesa_is_format_compressed(mt->format)) {
- /* The hardware alignment requirements for compressed textures
- * happen to match the block boundaries.
- */
- unsigned int i, j;
- _mesa_get_format_block_size(mt->format, &i, &j);
-
- /* On Gen9+ we can pick our own alignment for compressed textures but it
- * has to be a multiple of the block size. The minimum alignment we can
- * pick is 4 so we effectively have to align to 4 times the block
- * size
- */
- if (brw->gen >= 9)
- return i * 4;
- else
- return i;
- }
-
- if (mt->format == MESA_FORMAT_S_UINT8)
- return 8;
-
- if (brw->gen >= 9 && mt->tr_mode != INTEL_MIPTREE_TRMODE_NONE) {
- uint32_t align = tr_mode_horizontal_texture_alignment(brw, mt);
- /* XY_FAST_COPY_BLT doesn't support horizontal alignment < 32. */
- return align < 32 ? 32 : align;
- }
if (brw->gen >= 7 && mt->format == MESA_FORMAT_Z_UNORM16)
return 8;
@@ -248,12 +216,6 @@ intel_vertical_texture_alignment_unit(struct brw_context *brw,
const struct intel_mipmap_tree *mt)
{
/**
- * From the "Alignment Unit Size" section of various specs, namely:
- * - Gen3 Spec: "Memory Data Formats" Volume, Section 1.20.1.4
- * - i965 and G45 PRMs: Volume 1, Section 6.17.3.4.
- * - Ironlake and Sandybridge PRMs: Volume 1, Part 1, Section 7.18.3.4
- * - BSpec (for Ivybridge and slight variations in separate stencil)
- *
* +----------------------------------------------------------------------+
* | | alignment unit height ("j") |
* | Surface Property |-----------------------------|
@@ -270,23 +232,6 @@ intel_vertical_texture_alignment_unit(struct brw_context *brw,
* Where "*" means either VALIGN_2 or VALIGN_4 depending on the setting of
* the SURFACE_STATE "Surface Vertical Alignment" field.
*/
- if (_mesa_is_format_compressed(mt->format)) {
- unsigned int i, j;
-
- _mesa_get_format_block_size(mt->format, &i, &j);
-
- /* See comment above for the horizontal alignment */
- return brw->gen >= 9 ? j * 4 : 4;
- }
-
- if (mt->format == MESA_FORMAT_S_UINT8)
- return brw->gen >= 7 ? 8 : 4;
-
- if (mt->tr_mode != INTEL_MIPTREE_TRMODE_NONE) {
- uint32_t align = tr_mode_vertical_texture_alignment(brw, mt);
- /* XY_FAST_COPY_BLT doesn't support vertical alignment < 64 */
- return align < 64 ? 64 : align;
- }
/* Broadwell only supports VALIGN of 4, 8, and 16. The BSpec says 4
* should always be used, except for stencil buffers, which should be 8.
@@ -780,6 +725,13 @@ brw_miptree_layout(struct brw_context *brw,
mt->tr_mode = INTEL_MIPTREE_TRMODE_NONE;
+ /**
+ * From the "Alignment Unit Size" section of various specs, namely:
+ * - Gen3 Spec: "Memory Data Formats" Volume, Section 1.20.1.4
+ * - i965 and G45 PRMs: Volume 1, Section 6.17.3.4.
+ * - Ironlake and Sandybridge PRMs: Volume 1, Part 1, Section 7.18.3.4
+ * - BSpec (for Ivybridge and slight variations in separate stencil)
+ */
if (brw->gen == 6 && mt->array_layout == ALL_SLICES_AT_EACH_LOD) {
const GLenum base_format = _mesa_get_format_base_format(mt->format);
gen6_hiz_or_stencil = _mesa_is_depth_or_stencil_format(base_format);
@@ -809,6 +761,29 @@ brw_miptree_layout(struct brw_context *brw,
mt->align_w = 128 / mt->cpp;
mt->align_h = 32;
}
+ } else if (mt->compressed) {
+ /* The hardware alignment requirements for compressed textures
+ * happen to match the block boundaries.
+ */
+ _mesa_get_format_block_size(mt->format, &mt->align_w, &mt->align_h);
+
+ /* On Gen9+ we can pick our own alignment for compressed textures but it
+ * has to be a multiple of the block size. The minimum alignment we can
+ * pick is 4 so we effectively have to align to 4 times the block
+ * size
+ */
+ if (brw->gen >= 9) {
+ mt->align_w *= 4;
+ mt->align_h *= 4;
+ }
+ } else if (mt->format == MESA_FORMAT_S_UINT8) {
+ mt->align_w = 8;
+ mt->align_h = brw->gen >= 7 ? 8 : 4;
+ } else if (brw->gen >= 9 && mt->tr_mode != INTEL_MIPTREE_TRMODE_NONE) {
+ /* XY_FAST_COPY_BLT doesn't support horizontal alignment < 32 or
+ * vertical alignment < 64. */
+ mt->align_w = MAX2(tr_mode_horizontal_texture_alignment(brw, mt), 32);
+ mt->align_h = MAX2(tr_mode_vertical_texture_alignment(brw, mt), 64);
} else {
mt->align_w =
intel_horizontal_texture_alignment_unit(brw, mt, layout_flags);
--
2.4.2
More information about the mesa-dev
mailing list