[Mesa-dev] [PATCH V2 1/8] i965: Add a helper function intel_get_tile_dims()

[Anuj Phogat]

On Thu, Sep 10, 2015 at 12:20 PM, Chad Versace <chad.versace at intel.com>
wrote:

> On Wed 19 Aug 2015, Anuj Phogat wrote:
> > V2:
> > - Do the tile width/height computations in the new helper
> >   function and use it later in intel_miptree_get_tile_masks().
> > - Change the name to intel_get_tile_dims().
> >
> > Cc: Ben Widawsky <ben at bwidawsk.net>
> > Signed-off-by: Anuj Phogat <anuj.phogat at gmail.com>
> > ---
> >  src/mesa/drivers/dri/i965/intel_mipmap_tree.c | 81
> +++++++++++++++++++--------
> >  src/mesa/drivers/dri/i965/intel_mipmap_tree.h |  4 ++
> >  2 files changed, 63 insertions(+), 22 deletions(-)
> >
> > diff --git a/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
> b/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
> > index e85c3f0..c282e94 100644
> > --- a/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
> > +++ b/src/mesa/drivers/dri/i965/intel_mipmap_tree.c
> > @@ -563,35 +563,15 @@ static unsigned long
> >  intel_get_yf_ys_bo_size(struct intel_mipmap_tree *mt, unsigned
> *alignment,
> >                          unsigned long *pitch)
> >  {
> > -   const uint32_t bpp = mt->cpp * 8;
> > -   const uint32_t aspect_ratio = (bpp == 16 || bpp == 64) ? 2 : 1;
> >     uint32_t tile_width, tile_height;
> >     unsigned long stride, size, aligned_y;
> >
> >     assert(mt->tr_mode != INTEL_MIPTREE_TRMODE_NONE);
> > -
> > -   switch (bpp) {
> > -   case 8:
> > -      tile_height = 64;
> > -      break;
> > -   case 16:
> > -   case 32:
> > -      tile_height = 32;
> > -      break;
> > -   case 64:
> > -   case 128:
> > -      tile_height = 16;
> > -      break;
> > -   default:
> > -      unreachable("not reached");
> > -   }
> > -
> > -   if (mt->tr_mode == INTEL_MIPTREE_TRMODE_YS)
> > -      tile_height *= 4;
> > +   intel_get_tile_dims(mt->tiling, mt->tr_mode, mt->cpp,
> > +                       &tile_width, &tile_height);
> >
> >     aligned_y = ALIGN(mt->total_height, tile_height);
> >     stride = mt->total_width * mt->cpp;
> > -   tile_width = tile_height * mt->cpp * aspect_ratio;
> >     stride = ALIGN(stride, tile_width);
> >     size = stride * aligned_y;
> >
> > @@ -1081,6 +1061,63 @@ intel_miptree_get_image_offset(const struct
> intel_mipmap_tree *mt,
> >     *y = mt->level[level].slice[slice].y_offset;
> >  }
> >
> > +
> > +/**
> > + * This function computes the width and height in bytes of different
> tiling
> > + * patterns. If the BO is untiled, the dimensions are set to cpp.
> > + */
>
> Is the tile_w parameter in units of bytes or pixels? That should be
> documented at the top of the function.
>
It's in bytes. I'll document it.


>
> Also, just to be clear, "tile height" is always unitless. The hw docs
> sometime express it in units of "rows". But "rows" itself is unitless.
>
> Right. I'm returning the tile_h in bytes in this function, so I need to
fix it.
It didn't break anything because It isn't used anywhere.

> > +void
> > +intel_get_tile_dims(uint32_t tiling, uint32_t tr_mode, uint32_t cpp,
> > +                    uint32_t *tile_w, uint32_t *tile_h)
> > +{
> > +   if (tr_mode == INTEL_MIPTREE_TRMODE_NONE) {
> > +      switch (tiling) {
> > +      case I915_TILING_X:
> > +         *tile_w = 512;
> > +         *tile_h = 8 * cpp;
>
> For legacy tiling formats, the height of a tile is independent of the
> pixel size,  because the height is unitless. For Tile X, it's always
> 2^3. For Tile Y Legacy, it's always 2^5.
>
Right. I'll fix it.


> If tile_w is in units of bytes, then it's also independent of pixel
> size. If tile_w is in units of pixels, though, then
>
>     tile_w_pixels = tile_w_bytes / cpp
>
>
> > +         break;
> > +      case I915_TILING_Y:
> > +         *tile_w = 128;
> > +         *tile_h = 32 * cpp;
> > +         break;
> > +      case I915_TILING_NONE:
> > +         *tile_w = cpp;
> > +         *tile_h = cpp;
> > +         break;
> > +      default:
> > +         unreachable("not reached");
> > +      }
> > +   } else {
> > +      uint32_t aspect_ratio = 1;
> > +      assert(_mesa_is_pow_two(cpp));
> > +
> > +      switch (cpp) {
> > +      case 1:
> > +         *tile_h = 64 * cpp;
>
> I'm still reading the docs for the non-legay tiling formats Yf, and Ys.
> So I can't comment on this part of the patch.
>
> > +         break;
> > +      case 2:
> > +      case 4:
> > +         *tile_h = 32 * cpp;
> > +         break;
> > +      case 8:
> > +      case 16:
> > +         *tile_h = 16 * cpp;
> > +         break;
> > +      default:
> > +         unreachable("not reached");
> > +      }
> > +
> > +      if (cpp == 2 || cpp == 8)
> > +         aspect_ratio = 2;
> > +
> > +      if (tr_mode == INTEL_MIPTREE_TRMODE_YS)
> > +         *tile_h *= 4;
> > +
> > +      *tile_w = *tile_h * aspect_ratio;
> > +   }
> > +}
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/mesa-dev/attachments/20150911/ccb60129/attachment-0001.html>